二维方柱光子晶体的波导特性

具有缺陷的光子晶体,光子频率带隙内将出现局域模,而线缺陷相应地形成一个传输效率很高的光波导.计算了空气中Al材料的旋转四边形直柱光子晶体存在线缺陷时的带结构和态密度,给出了二维方形光子晶体的波导的TM模的电场分布,并讨论了波导耦合的传输效率.     

Quantum cascade surface-emitting photonic crystal laser

We combine photonic and electronic band structure engineering to create a surface-emitting quantum cascade microcavity laser. A high-index contrast two-dimensional photonic crystal is used to form a micro-resonator that simultaneously provides feedback for laser action and diffracts light vertically from the surface of the semiconductor surface. A top metallic contact allows electrical current injection and provides vertical optical confinement through a bound surface plasmon wave. The miniaturization and tailorable emission properties of this design are potentially important for sensing applications, while electrical pumping can allow new studies of photonic crystal and surface plasmon structures in nonlinear and near-field optics.     

Simultaneous inhibition and redistribution of spontaneous light emission in photonic crystals

Inhibiting spontaneous light emission and redistributing the energy into useful forms are desirable objectives for advances in various fields, including photonics, illuminations, displays, solar cells, and even quantum-information systems. We demonstrate both the "inhibition" and "redistribution" of spontaneous light emission by using two-dimensional (2D) photonic crystals, in which the refractive index is changed two-dimensionally. The overall spontaneous emission rate is found to be reduced by a factor of 5 as a result of the 2D photonic bandgap effect. Simultaneously, the light energy is redistributed from the 2D plane to the direction normal to the photonic crystal.     

Photonic band gap guidance in optical fibers

A fundamentally different type of optical waveguide structure is demonstrated, in which light is confined to the vicinity of a low-index region by a two-dimensional photonic band gap crystal. The waveguide consists of an extra air hole in an otherwise regular honeycomb pattern of holes running down the length of a fine silica glass fiber. Optical fibers based on this waveguide mechanism support guided modes with extraordinary properties.     

一维类梳状波导光子晶体的频率带隙宽度

一维类梳状波导是由在一维主链上周期性接枝而形成的光子晶体，利用界面响应理论可导出波导的色散关系，据此分别讨论了这种光子晶体的带隙宽度与波导接枝参数之间的关系，接枝的介电常数和长度的变化将会使对带隙的宽度发生改变，通过数值计算发现，对于不同类型的接枝，参数变化引起的带隙宽度的变化趋势基本相同，而不同的参数产生的影响则有很大差别。特别的，当参数变化至某些特定点时带隙将会消失，这和其他类型的光子晶体完全不同，带隙的消失不是因为缺陷而仅仅是因为参数改变的影响。     

缺陷和变周期结构光子晶体特性研究

构建了介质柱间距变化的变周期结构以及介质柱半径线缺陷两种二维光子晶体模型,并将时域有限差分法用于其能带特性研究。数值计算结果表明,在二维正方格光子晶体结构的基础上,一定范围内逐渐增加圆介质柱之间的距离,光子晶体的禁带宽度会增大,同时禁带的中心频率偏向低频方向,而采用相邻列介质柱半径交替变化的缺陷结构,也将使光子晶体的禁带发生相应的变化。     

缺陷和变周期结构光子晶体特性研究

构建了介质柱间距变化的变周期结构以及介质柱半径线缺陷两种二维光子晶体模型,并将时域有限差分法用于其能带特性研究。数值计算结果表明,在二维正方格光子晶体结构的基础上,一定范围内逐渐增加圆介质柱之间的距离,光子晶体的禁带宽度会增大,同时禁带的中心频率偏向低频方向,而采用相邻列介质柱半径交替变化的缺陷结构,也将使光子晶体的禁带发生相应的变化。     

Control of light emission by 3D photonic crystals

Three-dimensional (3D) photonic crystals containing artificial point defects have been fabricated to emit light at optical communications wavelengths. They were constructed by stacking 0.7-micrometer-period gallium arsenide striped layers, resulting in a 3D "woodpile" photonic crystal. Indium-gallium arsenide-phosphide quantum-well layers emitting at a wavelength of 1.55 micrometers were incorporated in the center of the crystal. Samples having up to nine stacked layers were constructed, and artificial point-defect cavities of different sizes were formed in the light-emitting layer. Light emission was suppressed in the photonic crystal regions, whereas cavity modes were successfully observed at the point defects and were size dependent.     

Excitation of orbital angular momentum resonances in helically twisted photonic crystal fiber

Spiral twisting offers additional opportunities for controlling the loss, dispersion, and polarization state of light in optical fibers with noncircular guiding cores. Here, we report an effect that appears in continuously twisted photonic crystal fiber. Guided by the helical lattice of hollow channels, cladding light is forced to follow a spiral path. This diverts a fraction of the axial momentum flow into the azimuthal direction, leading to the formation of discrete orbital angular momentum states at wavelengths that scale linearly with the twist rate. Core-guided light phase-matches topologically to these leaky states, causing a series of dips in the transmitted spectrum. Twisted photonic crystal fiber has potential applications in, for example, band-rejection filters and dispersion control.     

Proposed square spiral microfabrication architecture for large three-dimensional photonic band gap crystals

We present a blueprint for a three-dimensional photonic band gap (PBG) material that is amenable to large-scale microfabrication on the optical scale using glancing angle deposition methods. The proposed chiral crystal consists of square spiral posts on a tetragonal lattice. In the case of silicon posts in air (direct structure), the full PBG can be as large as 15% of the gap center frequency, whereas for air posts in a silicon background (inverted structure) the maximum PBG is 24% of the center frequency. This PBG occurs between the fourth and fifth bands of the photon dispersion relation and is very robust to variations (disorder) in the geometrical parameters of the crystal.     

Full three-dimensional photonic bandgap crystals at near-infrared wavelengths

An artificial crystal structure has been fabricated exhibiting a full three-dimensional photonic bandgap effect at optical communication wavelengths. The photonic crystal was constructed by stacking 0.7-micrometer period semiconductor stripes with the accuracy of 30 nanometers by advanced wafer-fusion technique. A bandgap effect of more than 40 decibels (which corresponds to 99.99% reflection) was successfully achieved. The result encourages us to create an ultra-small optical integrated circuit including a three-dimensional photonic crystal waveguide with a sharp bend.     

二维网格结构的拟膜分析法

分析了具有正交对角型单胞的平面网格结构。将其比拟为平面膜结构,并求出膜的面内刚度参数。给出平面网格结构嵌入各向同性基体材料而成的复合材料板的弹性本构参数表达式,并用数值方法简单验证了复合材料弹性本构参数表达式的正确性。     

Electrically driven single-cell photonic crystal laser

We report the experimental demonstration of an electrically driven, single-mode, low threshold current (approximately 260 microA) photonic band gap laser operating at room temperature. The electrical current pulse is injected through a sub-micrometer-sized semiconductor wire at the center of the mode with minimal degradation of the quality factor. The actual mode of interest operates in a nondegenerate monopole mode, as evidenced through the comparison of the measurement with the computation based on the actual fabricated structural parameters. As a small step toward a thresholdless laser or a single photon source, this wavelength-size photonic crystal laser may be of interest to photonic crystals, cavity quantum electrodynamics, and quantum information communities.     

Discovery of a Frank-Kasper sigma phase in sphere-forming block copolymer melts

Sphere-forming block copolymers are known to self-assemble into body-centered cubic crystals near the order-disorder transition temperature. Small-angle x-ray scattering and transmission electron microscopy experiments on diblock and tetrablock copolymer melts have revealed an equilibrium phase characterized by a large tetragonal unit cell containing 30 microphase-separated spheres. This structure, referred to as the sigma (σ) phase by Frank and Kasper more than 50 years ago, nucleates and grows from the body-centered cubic phase similar to its occurrence in metal alloys and is a crystal approximant to dodecagonal quasicrystals. Formation of the σ phase in undiluted linear block copolymers (and certain branched dendrimers) appears to be mediated by macromolecular packing frustration, an entropic contribution to the interparticle interactions that control the sphere-packing geometry.     

Generation and photonic guidance of multi-octave optical-frequency combs

Ultrabroad coherent comb-like optical spectra spanning several octaves are a chief ingredient in the emerging field of attoscience. We demonstrate generation and guidance of a three-octave spectral comb, spanning wavelengths from 325 to 2300 nanometers, in a hydrogen-filled hollow-core photonic crystal fiber. The waveguidance results not from a photonic band gap but from the inhibited coupling between the core and cladding modes. The spectrum consists of up to 45 high-order Stokes and anti-Stokes lines and is generated by driving the confined gas with a single, moderately powerful (10-kilowatt) infrared laser, producing 12-nanosecond-duration pulses. This represents a reduction by six orders of magnitude in the required laser powers over previous equivalent techniques and opens up a robust and much simplified route to synthesizing attosecond pulses.     

Crystal Structure of the Solid Electrolyte(C5H5NH) Ag5I6 at -30{degrees}C

The crystal structure of pyridinium hexaiodopentaargentate, (C(5)H(5)NH) Ag(5)l(6), is unique among those of the halide and chalcogenide solid electrolytes in that face-sharing iodide octahedra as well as face-sharing tetrahedra and face-sharing between octahedra and tetrahedra provide the paths for silver ion transport. There are two formula units in a hexagonal cell, space group P6/mcc (D6h(2)). At -30 degrees C, the lattice constants are a = 11.97 +/- 0.02, c = 7.41 +/- 0.01 A. The structure has three sets of sites for the silver ions. At -30 degrees C two of these sets are apparently filled with the ten silver ions per unit cell, while the third set of tetrahedrally coordinated general positions is empty. Therefore, the conductivity at this temperature is limited by the thermal excitation of the silver ions into the empty tetrahedra.     

Crystal structure of a carbon monoxide dehydrogenase reveals a [Ni-4Fe-5S] cluster

The homodimeric nickel-containing CO dehydrogenase from the anaerobic bacterium Carboxydothermus hydrogenoformans catalyzes the oxidation of CO to CO2. A crystal structure of the reduced enzyme has been solved at 1.6 angstrom resolution. This structure represents the prototype for Ni-containing CO dehydrogenases from anaerobic bacteria and archaea. It contains five metal clusters of which clusters B, B', and a subunit-bridging, surface-exposed cluster D are cubane-type [4Fe-4S] clusters. The active-site clusters C and C' are novel, asymmetric [Ni-4Fe-5S] clusters. Their integral Ni ion, which is the likely site of CO oxidation, is coordinated by four sulfur ligands with square planar geometry.     

Preparation of photonic crystals made of air spheres in titania

Three-dimensional crystals of air spheres in titania (TiO2) with radii between 120 and 1000 nanometers were made by filling the voids in artificial opals by precipitation from a liquid-phase chemical reaction and subsequently removing the original opal material by calcination. These macroporous materials are a new class of photonic band gap crystals for the optical spectrum. Scanning electron microscopy, Raman spectroscopy, and optical microscopy confirm the quality of the samples, and optical reflectivity demonstrates that the crystals are strongly photonic and near that needed to exhibit band gap behavior.     

Ammonioborite: new borate polyion and its structure

The mineral ammonioborite is monoclinic with unit cell dimensions (in angstroms): a = 25.27, b = 9.65, and c = 11.56; beta = 94 degrees 17', and the space group is C 2/c. Analysis of the crystal structure revealed the crystallo-chemical formula (NH(4))(3)B(15)O(20)(OH)(8).4H(2)O, with four such formula units in the unit cell. The basic structural unit is the double ring consisting of one BO(4) tetrahedron and four BO(3) triangles: in ammonioborite three of these units are connected to give trimeric ions [B(15)O(20)(OH)(8)](3-).     

Polarimetric constraints on the optical afterglow emission from GRB 990123

Polarization of the optical emission from GRB 990123 was measured on 24.17 January 1999 universal time with the Nordic Optical Telescope. An upper limit of 2.3% on the linear polarization was found. Accurate polarization measurements provide important clues to the blast wave geometry and magnetic field structure of gamma-ray bursts (GRBs). The lack of detectable polarization for GRB 990123 indicates that the optical afterglow was produced by a blast wave of unknown geometry with an insignificant coherent magnetic field or by a beamed outflow at high Lorentz factor seen at a small viewing angle. Such a collimated jet would help solve the problem of energy release in this exceptionally luminous cosmological burst.