Advanced solid phase extraction using molecularly imprinted polymers for the determination of quercetin in red wine

Solid phase extraction (SPE) based on molecularly imprinted polymers (MIPs) is a novel approach for sample preparation and preconcentration, gaining increased interest in the fields of environmental, clinical, and food analysis. The first application combining MIPs with SPE for advanced beverage analysis is reported. MIPs for the flavonoid quercetin have been generated, using quercetin as a template molecule in a self-assembly approach and yielding imprinting of 1% of the used template. The MIP achieved a capacity of 0.4 g quercetin per gram polymer and a recovery rate of 98.2%. The application of these synthetic receptors as SPE material for the selective extraction and preconcentration of quercetin from synthetic and red wine samples was investigated. Red wine samples from a French Merlot were directly applied onto the SPE cartridge. The collected fractions were analyzed by high-pressure liquid chromatography. For verification of the obtained results, a similarly prepared nonimprinted polymer and a classical octadecyl silane reversed-phase cartridge were applied as the SPE matrix during control experiments. The MIP enabled the selective extraction of quercetin from a complex matrix, such as red wine, spiked with 8.8 mg per liter quercetin, demonstrating the potential of molecularly imprinted solid phase extraction for rapid, selective, and cost-effective sample pretreatment.     

Selective determination of melamine in aqueous medium by molecularly imprinted solid phase extraction

A molecularly imprinted polymer able to recognize melamine in partially aqueous medium was synthesized using methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross-linking agent. The bound specificity and selectivity of the obtained material were verified by performing binding experiments with melamine and its structural analogue, 2,4,6-trimethoxy-1,3,5-triazine, respectively, using different aqueous binding media. Finally, the ability of MIP to selectively extract melamine from two real samples, a food supplement and a freeze-dried meat sample, was demonstrated.     

Determination of organochlorine and organophosphorus pesticide residues in eggs using a solid phase extraction cleanup

A multiresidue solid phase extraction (SPE) method for the isolation and subsequent gas chromatographic determination of nonpolar organochlorine and polar organophosphorus pesticide residues in eggs is described. The method uses an acetonitrile extraction followed by an SPE cleanup using graphitized carbon black and aminopropyl SPE columns. Organophosphorus pesticides are determined by gas chromatography with flame photometric detection. After further cleanup of the extract using Florisil SPE columns, organochlorine pesticides are determined by gas chromatography with electron capture detection. Studies were performed using eggs containing both fortified and incurred pesticide residues. The average recoveries were 86-108% for 8 fortified organochlorine pesticide residues and 61-149% for 28 fortified organophosphorus pesticide residues.     

Quantitative and confirmatory analyses of malachite green and leucomalachite green residues in fish and shrimp

Liquid chromatographic methods are presented for the quantitative and confirmatory determination of malachite green (MG) and leucomalachite green (LMG) for channel catfish, rainbow trout, tilapia, basa, Atlantic salmon, and tiger shrimp. Residues were extracted from tissues with ammonium acetate buffer and acetonitrile and isolated by partitioning into dichloromethane. LMG was quantitatively oxidized to the chromic MG with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone. Extracts were analyzed for total MG by liquid chromatography with both visible detection (LC-VIS) at 618 nm for routine screening and ion trap mass spectrometry (LC-MSn) with no discharge-atmospheric pressure chemical ionization for residue confirmation. The method was validated in each species fortified with LMG at 1, 2, 4, and 10 ng/g (ppb), and average recoveries ranged from 85.9 to 93.9%. Quantitative data were consistent for the two detection methods, with measured method detection limits of 1.0 ng/g for LC-VIS and 0.25 ng/g for LC-MSn. Incurred tissues from catfish, trout, tilapia, and salmon that had been treated with MG were also extracted and analyzed as part of this study.     

Study of an online molecularly imprinted solid phase extraction coupled to chemiluminescence sensor for the determination of trichlorfon in vegetables

This study reports a new online molecularly imprinted solid phase extraction coupled to chemiluminescence for the determination of trichlorfon. This molecularly imprinted polymer (MIP) was prepared through bulk polymerization, in which methacrylic acid (MAA) was used as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. This novel functionalized material was characterized by FT-IR spectra and adsorption, and it exhibited good recognition and selective ability and fast adsorption-desorption dynamics toward trichlorfon. The factors affecting preconcentration of the analytes and sensitivity of the method are discussed in detail. Under the optimal condition, the linear range of the calibration graph was between 0.02 and 1.0 ng L(-1), and the detection limit was 1 × 10(3) ng L(-1). The blank cucumber samples spiked with trichlorfon at three levels were extracted and determined by the presented method with recoveries ranging from 83.5 to 94.5%, and the results were correlated well with those obtained using gas chromatography. Moreover, this developed method was successfully applied to the quantitative detection of trichlorfon residues in leek samples.     

Determination of neonicotinoid pesticide residues in vegetables and fruits with solid phase extraction and liquid chromatography mass spectrometry

A rapid and simple extraction method for the simultaneous analysis of five neonicotinoid insecticides has been developed. Twelve different fruit and vegetable matrixes were extracted with methanol and cleaned up using a graphitized carbon solid phase extraction cartridge loading with a 20% methanol solution. The concentrated eluate after methanol elution was then analyzed for pesticide residues by liquid chromatography/mass spectrometry in the APCI positive mode. The five pesticides including nitenpyram, thiamethoxam, imidacloprid, acetamiprid, and thiacloprid were recovered at 70-95% at spike levels of 0.1 and 1 mg/kg in bell pepper, cucumber, eggplant, grape, grapefruit, Japanese radish, peach, pear, potato, rice, and tomato. Relative standard deviations were less than 10% for all of the recovery tests. The proposed method is fast, easy to perform, and could be utilized for regular monitoring of pesticide residues.     

A sensitive method for detection of sulfamethazine and N4-acetylsulfamethazine residues in environmental samples using solid phase immunoextraction coupled with MALDI-TOF MS

Sulfamethazine (SMT) and its major metabolite, N(4)-acetylsulfamethazine (NA-SMT), were each recovered from spiked water (0.1 ppb) and 10% (w/v) aqueous suspensions of soil (1 ppb) or composted manure (1 ppb), by using a three-stage solid phase immunoextraction (SPIE) system, followed by detection with matrix-assisted laser/desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Sulfonamide recovery rates are reported for separate stages of the SPIE system and for trace-level sulfonamide SPIE extraction from the environmental samples. SPIE MALDI-TOF MS is a rapid and definitive technique with potentially better efficiency relative to other established trace-level sulfonamide analytical methods. SPIE MALDI-TOF MS required 1.5 h per batch (8-24 samples/batch) for sample enrichment, 5 min per batch for probe preparation, and 5 min per sample to acquire and process the spectrum. This is the first time MALDI-TOF MS has been reported as a potential means of detecting trace-level drug residues in complex environmental samples.     

Determination of phosphate in solution at different ionic composition using malachite green

Abstract

The malachite green method was sometimes used to determine low concentrations of inorganic phosphate due to its high sensitivity. The aim of this work was to test the suitability of this method for the determination of phosphorus (P) extracted by various reagents, e.g., KCl 0.01–1.20M, CaCl₂ 0.01–0.1M, Na₂SO₄ 0.01–0.40M, NaHCO₃ 0.1M at pH 8.5, and NaOH 0.1M+NaCl 1M. The malachite green method was also compared with the traditional molybdenum blue method on 35 soil extracts. Color development reached stability within 2 hrs and was stable for up to 24 hrs for dilute solutions. For concentrated solutions the stability was inversely proportional to the concentration of the reagent. Salt concentration appeared to have no effect on absorbance in KCl extracts of up to 1.2M and in Na₂SO₄ extracts of up to 0.05M. Higher concentrations of sodium sulfate induced flocculation and precipitation of the dye complex, as did CaCl₂ above 0.04 M. A strong correlation was found between the malachite green and the molybdenum blue method. The malachite green method can be used for P determination in soil extracts when appropriate time of color development is provided and salt concentration is taken into account.     

Determination of vitamin D3 in liquid multivitamin preparation, using reverse phase, solid phase extraction liquid chromatography

A method is described for the determination of vitamin D3 in a liquid multivitamin preparation by liquid chromatography. Samples are purified on a disposable reverse phase extraction (SPE) column with a mobile phase of methanol-2-propanol (97 + 3) and are analyzed on a Zorbax ODS (5 micron) column with an acetonitrile-2-propanol-water (90 + 8 + 2) solvent system. Vitamin D3 is completely resolved from other interfering compounds within approximately 21 min and is detected with a UV detector at 254 nm. A mean of 98.5% of theory with a coefficient of variation of 3.8% was found for determination of vitamin D3 in a commercial preparation.     

Improved method for partition of organophosphate pesticide residues on a solid phase partition column

A specially modified form of diatomaceous earth was used to develop a solid phase partition column which, with methylene chloride, is used to extract organophosphate pesticides from an aqueous acetone filtrate. This column has proven to be a direct replacement for the time consuming and labor intensive separatory funnel partition of the Luke procedure. Recoveries from the column are quantitative and reproducible for industrial phosphates and a wide range of polar and nonpolar organophosphate pesticides. The column is reusable and convenient and results in a 35-45% savings in time over separatory funnel partition. Neither sulfate columns nor separatory funnels are required, and no emulsions are formed.     

Determination of carbofuran and its metabolites in rice paddy water by using solid phase extraction and liquid chromatography

A procedure for the determination of carbofuran and its metabolites (carbamate and phenolic) in rice paddy water is described. Water samples are concentrated on a C-18 solid phase extraction (SPE) column and eluted with methanol-water. The eluate is analyzed by reverse-phase liquid chromatography (LC) and measured by a wavelength programmable ultraviolet (UV) detector. The limit of detection for the method is 0.4 micrograms/L. Recovery studies were carried out at levels ranging from 1 to 15 micrograms/L in both rice paddy water and distilled water; recoveries ranged from 85.9 to 112.9%.     

Determination of limonin D-ring lactone hydrolase activity by solid phase extraction with indirect fluorescence detection

A method for the evaluation of limonin D-ring lactone hydrolase activity is described. The method utilizes solid phase extraction (SPE) for the isolation of limonin A-ring limonoate (LARL), which is subsequently converted to limonin and quantitated by fluorescence. The fluorescence method is capable of quantifying the formation of LARL in concentrations as low as 75 ng and is applicable to both purified and crude enzyme preparations. The coupling of SPE with fluorescence detection allows for the simple and rapid analysis of samples.     

QuEChERS分散萃取—气相色谱法测定有机肥料中23种有机磷药物残留

采用QuEChERS分散萃取结合气相色谱技术,建立了有机肥料中23种有机磷类药物残留的分析检测方法。样品采用含有0.1%冰醋酸的乙腈提取,目标物QuEChERS分散萃取粉净化,除去杂质后,经气相色谱检测,标准曲线外标法定量。结果表明:23种目标物在0.05～0.5 μg/mL范围内线性关系良好,相关系数为0.9990～0.9998。在有机肥料样品基质中,目标化合物在0.01、0.02、0.10 mg/kg 3个加标水平的平均回收率在80.9%～114.6%之间,相对标准偏差为1.4%～9.5%(n=6),基质效应因子为0.82～1.36。该方法净化效果好、操作简单、适用范围广,可用于有机肥料中多种有机磷类药物残留的定量测定。     

A simple method for the determination of trace levels of alkylphenolic compounds in fish tissue using pressurized fluid extraction, solid phase cleanup, and high-performance liquid chromatography fluorescence detection

A simple automated extraction method for the determination of alkylphenolic compounds in fish tissue is reported. Pressurized fluid extraction is used to extract ground fish tissue, and the resulting extract is purified on aminopropyl silica (APS) extraction cartridges. With no further sample preparation, nonylphenol (NP) and its ethoxylates, up to nonylphenol pentaethoxylate, are quantitated using normal phase (APS Hypersil) high-performance liquid chromatography with fluorescence detection. The major advantage of this technique is elimination of the conventional gel permeation cleanup step, a lengthy procedure designed to remove fish lipids. Spiked recoveries with lake trout averaged 85% for the six NP and NP ethoxylates that were investigated. Tissue concentrations of NP and NP ethoxylates determined in fish from various locations of the Great Lakes region ranged from 18 to 2075 ng/g, wet weight.     

Determination of dithiocarbamate fungicide residues in food by a spectrophotometric method using a vertical disulfide reaction system

Dithiocarbamates are a class of fungicides extensively used in many crops worldwide. The current residue definition of dithiocarbamates in food for compliance with maximum residue limits, at national and international levels, is total residues arising from the use of any or each dithiocarbamate fungicide, determined as CS(2). The analytical method most frequently used to analyze dithiocarbamate residues in food for monitoring purposes was proposed more than 30 years ago. In this method, total dithiocarbamates are decomposed to CS(2), which is purified and reacted with a cupric reagent. The yellow complex formed is quantified by spectrophotometry. In this paper, a new reaction system for the purification and complexation of CS(2) is proposed. The new system is less fragile than the traditional design, is easier to assemble, and allows for a higher sample throughput, in addition to being of low cost. Recovery of added mancozeb, thiram, or ziram (0.15-8.0 mg/kg) in rice, beans, apple, banana, orange, papaya, tomato, cucumber, and potato ranged from 82 to 120%, with relative standard deviations from 0 to 10% (n = 3 or 5). Analysis of apple, tomato, and papaya samples with field-incurred dithiocarbamate residues showed comparable results using both the traditional and the new reaction systems.     

Determination of isoxaflutole (balance) and its metabolites in water using solid phase extraction followed by high-performance liquid chromatography with ultraviolet or mass spectrometry

Balance (isoxaflutole, IXF) belongs to a new family of herbicides referred to as isoxazoles. IXF has a very short soil half-life (<24 h), degrading to a biologically active diketonitrile (DKN) metabolite that is more polar and considerably more stable. Further degradation of the DKN metabolite produces a nonbiologically active benzoic acid (BA) metabolite. Analytical methods using solid phase extraction followed by high-performance liquid chromatography-UV (HPLC-UV) or high-performance liquid chromatography-mass spectrometry (HPLC-MS) were developed for the analysis of IXF and its metabolites in distilled deionized water and ground water samples. To successfully detect and quantify the BA metabolite by HPLC-UV from ground water samples, a sequential elution scheme was necessary. Using HPLC-UV, the mean recoveries from sequential elution of the parent and its two metabolites from fortified ground water samples ranged from 68.6 to 101.4%. For HPLC-MS, solid phase extraction of ground water samples was performed using a polystyrene divinylbenzene polymer resin. The mean HPLC-MS recoveries of the three compounds from ground water samples spiked at 0.05-2 microg/L ranged from 100.9 to 110.3%. The limits of quantitation for HPLC-UV are approximately 150 ng/L for IXF, 100 ng/L for DKN, and 250 ng/L for BA. The limit of quantitation by HPLC-MS is 50 ng/L for each compound. The methods developed in this work can be applied to determine the transport and fate of Balance in the environment.     

Semiautomated determination of pesticides in water using solid phase extraction disks and gas chromatography-mass spectrometry

A method based on semiautomated solid phase extraction using octadecyl-bonded silica disks and gas chromatography-mass spectrometry, operated in selected ion monitoring mode, allows detection and quantification of approximately 100 pesticides and transformation products in drinking water. Samples (500 mL) were passed through the disk, and the retained pesticides were eluted with acetone and ethyl acetate. Typical recoveries for pesticides at 0.1 microg L(-1) in water were in the range of 72-120% with relative standard deviations less than 20%. Calibration curves were linear over the range of 0.025-0.5 microg mL(-1) (equivalent to a concentration range in drinking water of 0.05-1.0 microg L(-1)).     

A sensitive method for detecting the depletion of nonexchangealble potassium in the rhizosphere using a sequential extraction with 0.01 molar hydrochloric acid

Twenty-one strains of fluorescent pigment-producing Pseudomonas (abbreviated to FPP-Pseudomonas) species were isolated from soil and roots of apple and peach trees using selective media. FPP-Pseudomonas strains were identified as Pseudomonas fluorescens. Moreover, on the basis of the utilization of several organic compounds, these strains were divided into three groups.

P. fluorescens strains isolated from the roots were assigned to mainly groups 1 and 2, and most of the isolates from the soil to group 3. All the strains of group 2 exhibited antifungal activity (in vitro) against three soilborne plant pathogenic fungi: Rhizoctonia solani, Verticillium dahliae, and Rosellinia necatrix. These results suggest that the strains of group 2 play an important role as antifungal rhizobacteria.