One-step derivatization and preconcentration microextraction technique for determination of bisphenol A in beverage samples by gas chromatography-mass spectrometry

A simple technique based on ultrasound-assisted emulsification microextraction in situ derivatization (USAEME-ISD) is proposed for the one-step derivatization, extraction, and preconcentration of bisphenol A (BPA) in beverage samples prior to gas chromatography-mass spectrometry (GC-MS) analysis. BPA was in situ derivatized with acetic anhydride and simultaneously extracted and preconcentrated by using USAEME. Variables affecting the extraction efficiency of BPA were evaluated. Under optimal experimental conditions, the detection limit (LOD) was 38 ng L(-1) with a relative standard deviation (RSD) value of 11.6%. The linear working range was 100-1250 ng L(-1), and the coefficient of estimation (r(2)) of the calibration curve was ≥0.9971. The robustness of the proposed methodology was probed by developing a recovery study at two concentrations (125 and 500 ng L(-1)) over different beverage samples. This study led to a satisfactory result achieving recoveries of ≥82%, which showed acceptable robustness for determination of nanograms per liter of BPA in samples of food safety interest.     

Ion chromatographic determination of sulfites in foods

Ion chromatography (IC) is shown to be a promising technique for the determination of sulfites (SO2, SO2/3-) in foods. Results of a 10 min flash distillation and 10 min IC determination compare favorably with the results from the conventional Monier-Williams method for total sulfite in a variety of food matrices. The IC technique also provides a wealth of additional information, such as (1) sulfite and sulfate (oxidized sulfite) content of the spiking or treatment solution, (2) residual sulfite applied to the food after oxidation losses in the treatment process, (3) free sulfite in foods, and (4) total sulfite in foods. As a further check on the Monier-Williams method, the sulfate content of the trapping solution can be determined by IC. Because the IC technique traps the liberated SO2 in a non-oxidizing rather than an oxidizing medium, it is considered free from interfering sulfides and organic sulfur-containing groups which can give false positives in the Monier-Williams method. IC thus offers a high speed, more sensitive, and cost-effective alternative to conventional techniques for the determination of sulfite in foods.     

Mid-infrared diffuse reflectance spectroscopy for the quantitative analysis of agricultural soils

Soil samples were analyzed conventionally and by mid-infrared diffuse reflectance spectroscopy for total C, total N, pH, and measures of biological activity. Ground, non KBr diluted, samples (n = 180) from experimental plots (two locations, three replicate plots, under plow and no-till practices, three rates of N fertilizer, and from five depths) were scanned from 4000 to 400 cm(-1) (4-cm(-1) resolution, 64 co-added scans) on a DigiLab FTS-60 Fourier transform spectrometer using a custom-made linear sample transport (50 by 2 mm sample area scanned). Results using partial least-squares regression showed that accurate calibrations can be developed for the determination of a number of compositional parameters: total C, total N, pH, and many measures of biological activity. In general, the results achieved using mid-infrared spectra were at least as accurate as those found previously using near-infrared spectra and were sometimes significantly better, that is, pH.     

Simultaneous quantitation of 2-acetyl-4-tetrahydroxybutylimidazole, 2- and 4-methylimidazoles, and 5-hydroxymethylfurfural in beverages by ultrahigh-performance liquid chromatography-tandem mass spectrometry

An ultrahigh-performance liquid chromatography (UHPLC) tandem mass spectrometric (MS/MS) method was developed for the simultaneous quantification of 2-acetyl-4-tetrahydroxybutylimidazole (THI), 2- and 4-methylimidazoles (2-MI and 4-MI), and 5-hydroxymethylfurfural (HMF) in beverage samples. A C30 reversed-phase column was used in this method, providing sufficient retention and total resolution for all targeted analytes, with an MS/MS instrument operated in selected reaction monitoring (SRM) mode for sensitive and selective detection using isotope-labeled 4-methyl-d(3)-imidazole (4-MI-d(3)) as the internal standard (IS). This method demonstrates lower limit of quantification (LLOQ) at 1 ng/mL and coefficient of determination (r(2)) >0.999 for each analyte with a calibration range established from 1 to 500 ng/mL. This method also demonstrates excellent quantification accuracy (84.6-105% at 5 ng/mL, n = 7), precision (RSD < 7% at 5 ng/mL, n = 7), and recovery (88.8-99.5% at 10, 100, and 200 ng/mL, n = 3). Seventeen carbonated beverage samples were tested (n = 2) in this study including 13 dark-colored beverage samples with different flavors and varieties and 4 light-colored beverage samples. Three target analytes were quantified in these samples with concentrations in the range from 284 to 644 ng/mL for 4-MI and from 706 to 4940 ng/mL for HMF. THI was detected in only one sample at 6.35 ng/mL.     

Preparation of Modified Magnetic Cobalt Nanoparticles as a New Magnetic Sorbent for the Preconcentration and Determination of Trace Amounts of Lead Ions in Environmental Water and Soil (Air-Dust) Samples

In this study, cobalt magnetic nanoparticles (MNPs) were synthesized and then modified by sodium dodecyl sulfate (SDS) and 2-(5-bromo-2-pyridylazo)-5-diethyl aminophenol ligand (5-Br-PADAP), through a chemical precipitation method. Characterization of the prepared MNP adsorbents was performed by Fourier transform infrared and transmission electron microscopy. Cobalt nanoparticles (NPs) surface modified with SDS and 5-Br-PADAP was evaluated as a nanoparticulate solid-phase extraction (SPE) absorbent for lead ions Pb(II) from water and standard samples, prior to its flame atomic absorption spectrometry determination. Effects of pH, amount of sorbent, desorption solvent, adsorption time, desorption time, and interfering ion concentration on extraction efficiency were investigated. Under optimal conditions, the calibration curve was linear in the range of 1.0–500 ng mL^?1of Pb(II) with R² = 0.998. Detection limit was 1.6 ng mL^?1 in the original solution (3S_b/m), and the relative standard deviation for replicate determination of 0.5 μg mL^?1 Pb(II) was ±2.7%.     

Fast kinetic determination of 1-naphthylacetic acid in commercial formulations, soils, and fruit samples using stopped-flow phosphorimetry

A kinetic method has been developed for the determination of 1-naphthylacetic acid by means of micellar-stabilized room temperature phosphorescence (MSRTP) using the stopped-flow mixing technique. The main feature of this system is that it diminishes the time required for the deoxygenation of the micellar medium and for the phosphorescence development. Phosphorescence enhancers such thallium(I) nitrate, sodium dodecyl sulfate (SDS), and sodium sulfite were optimized to obtain maximum sensitivity. The pH was also optimized as it strongly affects the luminescent properties of 1-naphthylacetic acid. A pH of 6.6 was selected as adequate for the phosphorescence development. The kinetic curve of 1-naphthylacetic acid phosphorescence was scanned at lambda(ex) = 278 nm and lambda(em) = 490 nm, and the maximum rate of phosphorescence was taken as the analytical signal. This was obtained by calculating the maximum slope of the curve in an interval of 3.6 s as it provided a good noise-to-signal ratio. This method permitted the determination of 1-naphthylacetic acid throughout a concentration range of 100-1800 ng mL(-1) with high precision (relative standard error = 0.91% and relative standard deviation = 2.30%; 1-naphthylacetic acid concentration = 800 ng mL(-1)). According to the Clayton criterion, the detection limit was 45 ng mL(-1). The same limit resulted in 39.3 ng mL(-1) when the error propagation theory was applied. The applicability of the method was successfully demonstrated by determining 1-naphthylacetic acid in different kind of samples, such as phytosanitary products, soils, pears, and apples. Recovery values not significantly different from the nominal content or the spiked amount were found for these determinations.     

Determination of sulfite in food by flow injection analysis

A method is described for the determination of sulfite levels in food products by flow injection analysis (FIA). The method is based on the decolorization of malachite green by SO2, which is isolated from the flowing sample stream by means of a gas diffusion cell. The FIA method has a detection limit in food sample extracts of 0.1 ppm SO2 (3 times peak height of blank), which corresponds to 1-10 ppm SO2 in a food product, depending on the extraction procedure used. At the 5 ppm SO2 level in a food extract, the precision of replicate injections is +/- 1-2%. The method was tested on a variety of both sulfite-treated and untreated food products and the results compared favorably with those obtained by the Monier-Williams, colorimetric (pararosaniline), and enzymatic (sulfite oxidase) methods. The average differences from the FIA results were 19, 11, and 12%, respectively, for those samples (n = 12) above 50 ppm SO2. At lower levels the results were somewhat more erratic due to inaccuracies of the various methods at low concentrations.     

Optical sensor for sulfur dioxide determination in wines

A method for the determination of free and total sulfur dioxide in wines, based on the use of an optical sensor that employs a dichlorobis(diphenylphosphino)methane dipalladium I complex [Pd(2)(dppm)(2)Cl(2)] immobilized in a PVC membrane plasticized with o-nitrophenyloctylether (o-NPOE) is described. A sensing membrane [4.2% Pd(2)(dppm)(2)Cl(2), 20.8% PVC, and 75% o-NPOE] was adapted to the tip of a bifurcated optical fiber bundle to perform reflectance measurements at 550 nm. The detection system consisted of two cells (40 mL), which hold the sample solution (plus reagents) and the optical sensor, respectively. For the determination of free SO(2), a wine sample was mixed with H(2)SO(4) solution in the sample cell, into which N(2) was bubbled, providing mixing of the solutions and conducting the SO(2) formed toward the detection cell. For determination of total SO(2), a KOH solution was mixed with the wine in the sample cell. Afterward, an H(2)SO(4) solution was added to the cell, and then N(2) was bubbled to conclude the measurement. Linear responses up to 50 and 150 mg L(-1) were obtained for free and total SO(2), with detection limits of 0.37 and 0.70 mg L(-1), respectively. The repeatability of the method was evaluated by carrying out 10 measurements using a single wine sample, providing relative standard deviation values of 2.2 and 2.5% for free and total SO(2), respectively. The sensing membrane prepared from 10 muL of the cocktail solution lasted for 80 measurements, whereas those prepared from 200 muL can be used for 250 measurements. The method was applied to free and total SO(2) determination in wines, and the results did not show significant difference from those obtained with the Ripper reference method at a confidence level of 95%.     

Determination of total sulfite in shrimp, potatoes, dried pineapple, and white wine by flow injection analysis: collaborative study

A method for the determination of total sulfite in shrimp, potatoes, dried pineapple, and white wine by flow injection analysis (FIA) was collaboratively studied by 8 laboratories. In the method, the sample solution is reacted with sodium hydroxide to liberate aldehyde-bound sulfite. The sample stream is acidified to produce SO2 gas, which diffuses across a Teflon membrane in the gas diffusion cell into a flowing stream of malachite green. The degree of discoloration of the malachite green is proportional to the amount of sulfite in the sample solution. Red wine was included in the study but interlaboratory precision for these samples was not satisfactory and correlation with Monier-Williams results was poor. The present method is not recommended for use with these samples. For shrimp, potatoes, dried pineapple, and white wine, average reproducibility (RSDR) of results was 25% for samples at 10 ppm SO2 and 10% for samples at greater than 50 ppm. Overall average reproducibility was 14%. Recoveries of sulfite added to samples averaged 80%. Comparison of FIA with the Monier-Williams method indicated comparable results by the 2 methods. The FIA method has been adopted official first action for determination of greater than or equal to 5 ppm total sulfite in shrimp, potatoes, dried pineapple, and white wine.     

Determination of the pesticide napropamide in soil, pepper, and tomato by micelle-stabilized room-temperature phosphorescence

A selective and sensitive method for determining napropamide by room-temperature phosphorescence in SDS micelles is proposed and applied to the determination of this substance in a technical formulation and in spiked soil, pepper, and tomato samples. The use of phosphorescence enhancers such as sodium dodecyl sulfate (micellar agent), thallium (I) nitrate (external heavy atom), and sodium sulfite (deoxygenation agent) was studied and optimized to obtain maximum sensitivity. The determination was performed in 66 mM SDS, 30 mM thallium (I) nitrate, and 8 mM sodium sulfite. Taking into account both maximum phosphorescence intensity and the time required to reach that, a pH value of 7.2 was selected. After the samples were left standing at room temperature for 10 min, the phosphorescence was totally developed. The intensity was then measured at lambda(ex) = 282 nm and lambda(em) = 528 nm. The calibration graph was linear for 50-600 ng mL(-1) napropamide. The detection limit, according to the error propagation theory, was 16 ng mL(-1). The method has been demonstrated for the analysis of soils, peppers, and tomatoes, but, because of matrix interference, the method of standard additions was applied to determine napropamide in the vegetable samples. Recoveries from all these matrixes of added napropamide were near 100%.     

Investigation of the potential utility of single-bounce attenuated total reflectance Fourier transform infrared spectroscopy in the analysis of distilled liquors and wines

A new Fourier transform infrared (FTIR) spectroscopic method based on single-bounce attenuated total reflectance (SB-ATR) spectroscopy was developed for the analysis of distilled liquors and wines. For distilled liquors, a partial least-squares (PLS) calibration was developed for alcohol determination based on the SB-ATR/FTIR spectra of mixtures of ethanol and distilled water. An independent set of 12 different distilled liquor samples was predicted from the PLS calibration, and a standard deviation of the differences for accuracy (SDD(a)) between actual and predicted values of 0.142% (v/v) was obtained. The potential utility of SB-ATR/FTIR spectroscopy for the analysis of wines was initially evaluated based on a comparison with Fourier transform near-infrared (FT-NIR) spectroscopy and FTIR spectroscopy using a flow-through transmission cell. PLS calibrations for alcohol, total reducing sugars, total acidity and pH were developed using pre-analyzed wine samples (n = 28), and for SB-ATR/FTIR spectroscopy, the SDD(a) for the leave-one-out cross-validation statistics were of the order of 0.100% (v/v), 0.707 g L(-1), 0.189 g L(-1) (H2SO4), and 0.230, respectively. Overall, the SB-ATR/FTIR results were better than those obtained using FT-NIR spectroscopy and comparable to those obtained with transmission FTIR spectroscopy. A PLS calibration based on preanalyzed wine samples (n = 72) for the prediction of 11 different components and parameters in wines by SB-ATR/FTIR spectroscopy was subsequently developed and validated using an independent sample set (n = 77). Good coefficients of correlation between the reference and predicted values for the validation set were obtained for most of the components and parameters except citric acid, volatile acids, and total SO2. The results of this study demonstrate the suitability of SB-ATR/FTIR spectroscopy for the routine analysis of distilled liquors and wines.     

Liquid chromatographic determination of sulfite in grapes and selected grape products

A liquid chromatographic (LC) method is described for the determination of sulfite in grapes and certain grape products. Sulfite is extracted from grapes with aqueous formaldehyde solution buffered at pH 5; free sulfite is converted to hydroxymethylsulfonate (HMS), which is extremely stable at pH 3-7. Subsequent heating to 80 degrees C for 30 min converts reversibly bound forms of sulfite to HMS. The extract is then analyzed by reverse-phase ion-pairing liquid chromatography, using a C18 column and a mobile phase of aqueous 0.005 M tetrabutylammonium ion in 0.05 M acetate, pH 4.7, and a flow rate of 1 mL/min. Aqueous KOH is added to the eluate to convert HMS to free sulfite, which is then treated with 5,5'-dithiobis[2-nitrobenzoic acid]. This reaction produces the 3-carboxy-4-nitrothiophenolate anion, which is determined by measurement of electronic absorption at 450 nm. For grapes spiked with HMS at 5-20 ppm (as SO2), recoveries ranged from 92 to 112%, with a coefficient of variation of 4.6%. The method was also used to determine sulfite in various grape products. Results were comparable to those obtained by the AOAC official Monier-Williams method.     

光电漫反射式联合收割机谷物产量计量系统研发与性能试验

为了进一步提高联合收割机谷物产量计量系统的精度,自主研发了基于光电漫反射原理的谷物产量计量系统。系统主要由传感器模块、数据处理模块、GPS模块和谷物产量计量显示终端组成。光电式谷物产量计量系统计量作业时,当联合收割机籽粒升运器刮板输送谷物经过漫反射型谷物体积传感器时,会间歇性的阻断光路,从而产生脉宽信号,脉宽信号大小与刮板上谷物厚度成正比,同时升运器转速传感器输出转速信号,谷物产量计量数据处理模块将采集到的2路传感器信号进行放大、滤波和A/D转换后与GPS模块采集的联合收割机行进速度、经纬度信息由RS485总线传输至光电谷物产量计量软件系统,经光电式谷物产量模型处理后,将产量信息、速度信息、位置信息等实时显示在终端上。为了验证光电式谷物产量计量系统的性能,分别开展了室内主要传感器性能台架试验和系统田间动态性能验证试验,试验中谷物喂入量在0.1~6 kg/s范围内,台架试验表明升运器转速传感器测量误差小于2.00%,漫反射型谷物体积传感器测量误差小于3.50%。田间动态性能验证试验结果表明光电式谷物产量计量系统运行稳定,系统检测结果与实际测量结果决定系数R~2达到0.848 4,测产误差最大为3.51%,满足田间实际测产需要,为精准农业变量作业提供了科学依据。     

Determination of sulfite in foods and beverages by ion exclusion chromatography with electrochemical detection: collaborative study

A liquid chromatographic (LC) method for determination of total sulfite in foods and beverages by alkali extraction followed by ion exclusion chromatographic separation and electrochemical detection (IEC-EC) was collaboratively studied by 9 laboratories. Blind duplicate samples of starch, diluted lemon juice, wine cooler, dehydrated seafood, and instant mashed potatoes were analyzed without spiking and with added sulfite at 2 levels. The initial sulfite levels varied from 0 to 384 ppm SO2, and the levels added varied from 10 to 400 ppm. The initial sulfite levels determined by the IEC-EC method and the Monier-Williams method were in good agreement. Recovery of added sulfite by the IEC-EC method was generally higher than that by the Monier-Williams method. Within-laboratory repeatability (RSDr) for the IEC-EC method varied from 4.4 to 26.0%, and overall reproducibility (RSDR) varied from 8.5 to 39.3%. The collaborators found the method to be fast, sensitive, and easy to use, which makes it a useful alternative to the Monier-Williams method. The method has been adopted official first action.     

Differential pulse polarographic determination of sulfites in foods: collaborative study

A differential pulse polarographic (DPP) method for the determination of "free" and "total" sulfite in foods was collaboratively studied by 8 laboratories. The collaborators analyzed blind duplicate samples of shrimp, orange juice, peas, dried apricots, and dehydrated potatoes. Collaborators also analyzed the same samples spiked with sulfites at 2 levels, which ranged from 10 to 1100 micrograms added SO2/g. The variability of free SO2 results was excessive for quantitative analysis, but the method can be used for qualitative detection of free SO2. The method for total SO2 determination was suitable for as low as approximately 10 micrograms/g. Recoveries are comparable to those for the official Monier-Williams method at high levels and are superior at low levels. The method has been adopted official first action for determination of total SO2 in the foods studied.     

S-sulfonate contents in raw and cooked meat products

S-Sulfonates (R-S-SO3-) are compounds formed by the reaction between the sulfites added to foodstuffs and the disulfide bonds of cystine, peptides, and proteins. The content of S-sulfonates has been determined in raw sausages and burgers (n = 62). The range of variation in the contents of the determined S-sulfonates is very wide and varies between 47 and 267 microg of SO2/g. The degree of formation of S-sulfonates with regard to the determined sulfite (total SO2 + S-sulfonates) is similar in all of the samples and does not seem to be conditioned by the meat compound (chicken or beef) or by the process of elaboration or type of product (burgers or sausages). In grilled burgers (n = 20) significant losses are produced in the levels of the additive in any of its forms. The value for the S-sulfonates is 31 +/- 9.8%, 29 +/- 6.6% corresponding to the free sulfite and a very similar percentage to the total sulfite (free + reversibly bound) 28 +/- 6.7%. It is possible that during the cooking process cleavages of some bound compounds occur, releasing SO2 and reacting to form new adducts.     

Improved high-performance liquid chromatography (HPLC) method for qualitative and quantitative analysis of allantoin in Zea mays

A high-performance liquid chromatography (HPLC) method for the qualitative and quantitative analysis of allantoin in silk and seed of Zea mays has been developed. Allantoin separation in crude extract was achieved using a C 18 column and phosphate buffer solution (pH 3.0) as a mobile phase at ambient temperature at a flow rate of 1.0 mL/min and detected at 210 nm. The results showed that the amount of allantoin in samples was between 14 and 271 mg/100 g of dry plant material. A comprehensive validation of the method including sensitivity, linearity, repeatability, and recovery was conducted. The calibration curve was linear over the range of 0.2-200 microg/mL with a correlation coefficient of r2>0.999. Limit of detection (LOD, S/N=3) and limit of quantification (LOQ) values of the allantoin were 0.05 and 0.2 microg/mL (1.0 and 4.0 ng) respectively. The relative standard deviation (RSD) value of the repeatability was reported within 1.2%. The average recovery of allantoin added to samples was 100.6% with RSD of 1.5%.     

S-sulfonate determination and formation in meat products

A treatment with cyanide for the analysis of S-sulfonates in meat and meat derivatives, after a study of the effectiveness of this agent and that of dithiothreitol (DTT), is proposed. Once the protein-bound sulfite has been released, it is determined by HPLC ion exclusion with electrochemical detection. In the assay on the reproducibility of the method, standard deviations were 7.4, 9.2, and 11.4 for mean S-sulfonate values of 69, 107, and 130 microg of SO(2)/g, respectively. Mean recovery was 91.2% for different amounts (56, 111, and 223 microg of SO(2)/g) of S-sulfocysteine added. A study was made of the formation of S-sulfonates in model systems and in meat from different species-chicken and beef-with different fat contents. In the assays with meat, two different levels of sulfite addition were used: 600 and 1200 microg of SO(2)/g. From the assays carried out in model systems with sulfite and cystine it may be concluded that one factor limiting the interaction is the accessibility to disulfide groups. The proportion of S-sulfonates in sulfited meat remains relatively constant and does not seem to be governed by the meat component, the level of sulfite addition, or the fat content. However, the latter two factors are inversely correlated with the retention of sulfite in the foods analyzed.     

Magnetic Solid-Phase Extraction Based on Modified Iron Oxide Nanoparticles for the Preconcentration of Ultra-Trace Amounts of Copper Ions in the Environmental and Plant Samples and its Determination Using FAAS

In the present work, magnetic iron oxide nanoparticles (MIONPs) coated with sodium dodecyl sulfate (SDS) and modified with 1-(2-pyridylazo)-2-naphthol (PAN) as a new nanoparticle were prepared and used as an adsorbent for the extraction and preconcentration of copper ions. After adsorption, copper ions were desorbed with nitric acid (HNO₃), followed by determination with flame atomic absorption spectrometry (FAAS). The extraction conditions0. were investigated systematically. The linear range 3.0–500.0 ng mL^?1 and the detection limit of 0.6 ng mL^?1 were obtained. The relative standard deviation (RSD) of the method for seven replicate determinations of 0.1 µg mL^?1 of Cu(II) was 2.2%. The method was applied for the determination of Cu(II) in different water samples with good trueness. The accuracy was also evaluated through analyses of a certified reference material (CRM TMDW-500).     

Automated on-line solid-phase extraction-liquid chromatography-electrospray tandem mass spectrometry method for the determination of ochratoxin A in wine and beer

An automated on-line solid-phase extraction-liquid chromatography-electrospray tandem mass spectrometry (SPE-LC-ESI-MS/MS) method was developed for the determination of ochratoxin A (OTA) in alcoholic beverages. Mean recoveries for wine and beer were, respectively, 75 and 82%. Detection was achieved in negative ionization with a Q TRAP mass spectrometer operating in multiple-reaction monitoring (MRM) mode or enhanced product ion (EPI) mode, using the third quadrupole as linear ion trap. The MRM mode turned out to be more sensitive; the method allowed accurate determination of OTA in the range of 0.01-25 ng mL(-1) using external calibration. Within-day and between-day relative standard deviation percentages were <6.2 and <9.1%, respectively. In EPI mode, fragmentation spectra at the limit of quantification (0.03 ng mL(-1)) and good linearity could be obtained. Application of the method (MRM mode) to the analysis of several wine and beer samples purchased in local stores revealed OTA levels in the ranges of 0.03-1.44 ng mL(-1) for wines and 0.02-0.14 ng mL(-1) for beers.