Direct and remote sensing observations of the effects of ships on clouds

Under certain conditions ships can affect the structure of shallow layer clouds. Simultaneous observations of two ship track signatures in stratus clouds from a satellite and in situ from an aircraft show that in the ship tracks the droplet sizes were reduced and total concentrations of both droplets and particles were substantially increased from those in adjacent clouds. In situ measurements of the upwelling radiance within the ship tracks was significantly enhanced at visible wavelengths, whereas radiance at 2.2 micrometers was significantly reduced. Cloud reflectivity along the tracks was enhanced at 0.63 and 3.7 micrometers. These observations support the contention that ship track signatures in clouds are produced primarily by particles emitted from ships.     

Olivines: revelation of tracks of charged particles

A one-step, three-component aqueous etchant was developed for revealing the tracks of charged particles in olivine. The etchant reveals tracks of small cone angle, which are equally well developed in all the crystallographic directions. The scope of fossil cosmic-ray track studies in extraterrestrial samples has thus been increased, because olivine is often an abundant constituent and because it has a higher threshold ionization for track registration and has lower uranium, thorium, and trace element concentrations as compared with pyroxenes and feldspars. The etchant does not attack any of the principal rock-forming minerals in normal etching time, which allows a nondestructive study of fossil tracks in thin-section mounts. The study of fossil cosmic-ray tracks in olivine is particularly valuable for investigations of very, very heavy cosmic-ray nuclei and for highly irradiated samples such as those found in the lunar regolith.     

Discovery of nucler tracks in interplanetary dust

Nuclear tracks have been identified in interplanetary dust particles (IDP's) collected from the stratosphere. The presence of tracks unambiguously confirms the extraterrestrial nature of IDP's, and the high track densities (10(10) to 10(11) per square centimeter) suggest an exposure age of approximately 10(4) years within the inner solar system. Tracks also provide an upper temperature limit for the heating of IDP's during atmospheric entry, thereby making it possible to distinguish between pristine and thermally modified micrometeorites.     

Particle track identification: application of a new technique to apollo helmets

The Apollo helmets are being used to record the dose of heavy particles to which astronauts are exposed on space missions. An improved method for examining and identifying the etched tracks of heavy charged particles consists of replicating tracks and measuring the etching rate as a function of position along the track. Tracks have been observed in Apollo helmets that correspond to ionized atoms heavier than iron.     

Particle Track, X-ray, Thermal, and Mass Spectrometric Studies of Lunar Material

Particle tracks in Apollo 11 samples are dominantly of cosmic ray and solar origin: primary galactic and solar flare particles, likely spallation recoil tracks, and possible solar-wind heavy particles. The energy spectrum of irongroup nuclei is inferred from track density gradients in surface layers, and a limit of < 10(-7) centimeter per year is deduced for the surface erosion rate. From cosmic ray tracks in rock and core samples it is clear that the lunar soil is stirred often during each few million years. X-rays reveal augite, anorthite, olivine, ilmenite, troilite, nonmeteoritic iron, and assorted glasses, but no major structural damage. Hydrogen, helium, and other gases in the fines are compatible with expected solar wind ratios.     

Space plasma physics: isotopic stack: measurement of heavy cosmic rays

A stack of plastic nuclear track detectors was exposed to heavy cosmic rays on the pallet of Spacelab 1. Some layers of the stack were rotated with respect to the main stack to determine the arrival time of the particles. After return of the stack the latent particle tracks are revealed by chemical etching. Under the optical microscope the charge, mass, energy, and impact direction of the particles can be deduced from the track geometry.     

浅谈无缝线路施工工艺

采用无缝线路技术在地铁中施工,能够使轨道的几何形态更加平顺,大大的增加了列车的行车速度,也减少了轨道对列车的磨损和轨道自身的磨损,为正式营运后的维修和保养节约大量的资金,由于此优势,乘客的乘车舒适感大大增加,也解决了有缝线路轨道间错台大,导致噪音大及列车出轨事故的技术难题,因此,无缝线路轨道以其低噪声、低维修率、高平顺性成为城市轨道交通中轨道结构的首选。     

Detection of charged particles by polymer grafting

Tracks of fission fragments from a californium-252 source have been revealed by graft copolymerization. A 15 percent solution of propenoic (acrylic) acid monomer was reacted with irradiated cellulose triacetate for 24 hours at 55 degrees C. Copolymer forms preferentially at the track sites and it can be dyed with rhodamine B because of its acid and hydrophylic properties. After the dyeing, the tracks were seen by using fluorescence microscopy.     

Optimized routing on agricultural fields by minimizing maneuvering and servicing time

Agricultural machines spend a significant part of their time on non-productive operations such as maneuvering near the boundaries of the field and loading or offloading of inputs or outputs (here referred to as servicing). This paper integrates existing methods for route optimization so as to minimize the time spent on turns and machine servicing on fields cultivated in straight rows. The following variables are optimized: (1) the orientation (angle) of the tracks, (2) the order of tracks, and (3) the types of turns between tracks. The angle of the tracks relative to field boundaries influences the number and lengths of the machine tracks, the number of turns and the positions where the machine can be serviced. Track order and the type of turns are selected to achieve overall efficiency. The algorithm was tested by computing routes for a set of fields of different sizes and assuming different operations. On small fields that do not require servicing, optimizing the turns between tracks resulted in a reduction of up to 50 % in turning time compared to the prevailing practice of navigation between adjacent tracks. A comparison of two sprayers in terms of servicing efficiency suggested that the algorithm can help selecting machinery for given field geometries. In some cases requiring machine servicing, the track orientation giving the shortest turning time did not produce the least servicing time. This illustrates that machine servicing should be taken into consideration for global optimization of machine traffic.     

Fossil alpha-particle recoil tracks: a new method of age determination

The discovery of a new type of fossil nuclear track in mica is reported. This track is produced by the recoil nucleus accompanying the alpha-particle decay of uranium and thorium impurities. The tracks are very short and can be seen with phase contrast microscopy. Measurement of fossil alpha-recoil track densities, coupled with determinations of the thorium and uranium contents, provides a new dating technique analogous to the previously discovered "fission-track method." The primary advantage of the alpha-recoil method is a several-thousand-fold increase in sensitivity over the fission-track technique. The alpha-recoil method should also prove useful in studying the problem of extinct isotopes in meteorites.     

Spectrum line intensity as a surrogate for solar irradiance variations

Active Cavity Radiometer Irradiance Monitor (ACRIM) solar constant measurements from 1980 to 1986 are compared with ground-based, irradiance spectrophotometry of selected Fraunhofer lines. Both data sets were identically sampled and smoothed with an 85-day running mean, and the ACRIM total solar irradiance (S) values were corrected for sunspot blocking (S(c)). The strength of the mid-photospheric manganese 539.4-nanometer line tracks almost perfectly with ACRIM S(e), Other spectral features formed high in the photosphere and chromosphere also track well. These comparisons independently confirm the variability in the ACRIM S(e), signal, indicate that the source of irradiance is faculae, and indicate that ACRIM S(e), follows the 11-year activity cycle.     

Visualization of cellulose synthase demonstrates functional association with microtubules

Expression of a functional yellow fluorescent protein fusion to cellulose synthase (CESA) in transgenic Arabidopsis plants allowed the process of cellulose deposition to be visualized in living cells. Spinning disk confocal microscopy revealed that CESA complexes in the plasma membrane moved at constant rates in linear tracks that were aligned and were coincident with cortical microtubules. Within each observed linear track, complex movement was bidirectional. Inhibition of microtubule polymerization changed the fine-scale distribution and pattern of moving CESA complexes in the membrane, indicating a relatively direct mechanism for guidance of cellulose deposition by the cytoskeleton.     

Dynamics of DNA double-strand breaks revealed by clustering of damaged chromosome domains

Interactions between ends from different DNA double-strand breaks (DSBs) can produce tumorigenic chromosome translocations. Two theories for the juxta-position of DSBs in translocations, the static "contact-first" and the dynamic "breakage-first" theory, differ fundamentally in their requirement for DSB mobility. To determine whether or not DSB-containing chromosome domains are mobile and can interact, we introduced linear tracks of DSBs in nuclei. We observed changes in track morphology within minutes after DSB induction, indicating movement of the domains. In a subpopulation of cells, the domains clustered. Juxtaposition of different DSB-containing chromosome domains through clustering, which was most extensive in G1 phase cells, suggests an adhesion process in which we implicate the Mre11 complex. Our results support the breakage-first theory to explain the origin of chromosomal translocations.     

Solar particle tracks in glass from the surveyor 3 spacecraft

A glass filter from Surveyor 3 has a surface density of approximately 1 x 10(6) tracks per square centimeter from heavy solar flare particles. The variation with depth is best fitted with a solar particle spectrum dN/dE = 2.42 x 10(6) E(-2) [in particles per square centimeter per year per steradian per (million electron volts per nucleon)], where E is the energy and N is the number of particles, from 2 million electron volts per nucleon to approximately 7 million electron volts per nucleon and dN/dE = 1.17 x 10(7) E(-3) at higher energies. Not much difference is observed between 0.5 and 5 micrometers, an indication that there is a lack of track-registering particles below 0.5 million electron volts per nucleon. The Surveyor data are compatible with track results in lunar rocks, provided an erosion rate of approximately 10(-7) centimeter per year is assumed for the latter. The results also suggest a small-scale erosion process in lunar rocks.     

Using a robust variogram to find an adequate butterfly neighborhood size for one-step yield mapping using robust fitting paraboloid cones

The yield map is generated by fitting the yield surface shape of yield monitor data mainly using paraboloid cones on floating neighborhoods. Each yield map value is determined by the fit of such a cone on a neighborhood that looks like a huge butterfly flying along the harvest track. Wide wings of the butterfly guarantee that the map is sufficiently smoothed out across the tracks. The coefficients of regression for modeling the paraboloid cones and the scale parameter are estimated using robust weighted M-estimators where the weights decrease with the distance from one to zero; the latter is at the border of the selected neighborhood. The robust way of estimating the model parameters supersedes a procedure for detecting outliers. For a given neighborhood size, this yield mapping method is implemented by the Fortran program butterflymap.exe , which can be downloaded from the web. To obtain the appropriate size of the selected neighborhood, the variance of the yield map values should equal the variance of the true yields, which is the difference between the variance of the raw yield data and the error variance of the yield monitor. It is estimated using a robust variogram on data that have not had the trend removed. Based on investigating butterfly neighborhoods the yield map was optimized if the search radius across the harvest tracks was eight times the swath width. One reason for this wide neighborhood is that the regression used for modeling the paraboloid cones is based on weights that decrease linearly from 1 in the middle to zero at the border of the neighborhood, so only data points close to the middle have a large weight.     

Navigation of single homing pigeons: airplane observations by radio tracking

Navigation of homing pigeons was investigated by tracking their homeward flights from a light airplane. Released on successive days from a single training point 35 miles (56 kilometers) from home, individual pigeons, each carrying a transmitter, were repeatedly tracked back to theirloft. No two tracks covered the same ground for even short distances, yet all tracks were within 10 miles of a straight line. Results from further releases north and south of the training point suggest that pigeons often use three methods in sequence to find home: compass orientation, bi-coordinate navigation, and orientation by familiar landmarks.     

Swimming ability of carnivorous dinosaurs

Dinosaur tracks from Lower Jurassic rocks at Rocky Hill, Connecticut, were apparently made by a floating or half-submerged animal that was pushing along the bottom with the tips of its toes. These tracks were probably made by large carnivorous dinosaurs (Theropoda) and are apparently the first evidence of swimming by such animals.     

Plutonium-244 fission tracks: evidence in a lunar rock 3.95 billion years old

Tracks attributed to the spontaneous fission of plutonium-244 and of uranium-238 were detected in a large whitlockite crystal in the lunar breccia 14321 from the Fra Mauro formation. For a track-retention age of 3.95 x 10(9) years the number of plutonium tracks relative to the number of uranium tracks is 0.51 +/- 0.15, provided that the rock was not heavily neutron-irradiated 3.95 X 10(9) years ago.     

Spot-application of fungicide for wild blueberry using an automated prototype variable rate sprayer

Wild blueberry producers apply fungicide uniformly without considering significant bare spots in the field. The wrong or over use of fungicide in bare spots results in an increased cost of production and threatens the environment. An automated prototype variable rate (VR) sprayer was used for spot-application (SA) of Chlorothalonil (Bravo^®) fungicide in a wild blueberry field. Eighteen 6.1 m wide test tracks were selected in the field and bare spots were mapped using a real-time kinematics-global positioning system (RTK-GPS). Six plots were selected randomly for three different application rates. Water sensitive papers (WSP) were placed in foliage and bare spots in SA and uniform-application (UA) tracks. The percent area coverage (PAC) of WSP with both SA and UA in foliage and bare spot areas were calculated. Plant growth parameters were measured from all 108 randomly selected plots in SA, UA and control (CN) tracks for comparison. Plant images were taken over six selected plots in each of the 18 tracks. Images were analyzed using custom developed software to calculate the percentage of green pixels (PGP) for determining the effect of Bravo^® on plant health. Fruit yield parameters were also measured from selected plots for comparison. Non-significance of the t test for SA versus UA plant targets’ PAC indicated that there was no significant bias in the SA with saving (9.90–51.22 %) and SA was accurate. Bravo^® did not show any significant difference on plant growth parameters among SA, UA and CN. However, PGP, floral bud and harvestable yield of SA and UA were significantly increased over CN. Therefore, a VR sprayer could be used for SA of fungicides in wild blueberry cropping system to reduce chemical usage and maintain crop productivity.     

Procedures of soil farming allowing reduction of compaction

Evaluation of new technologies using guidance systems is very important and can help producers with choosing the right equipment for their applications. Without using satellite navigation during field operations, there is a tendency for passes to overlap. That results in waste of fuel and pesticides, longer working times and also environmental damage. When utilising satellite guidance for field operations, there is a close connection with controlled traffic farming (CTF) as well. CTF is currently a quite quickly developing farming system based on fixed layout of machinery passes across a field. Tracks precisely set out for a machine’s tyres in the field could be a tool for minimising soil compaction risk which is another threat to the environment. The purpose of this paper was to evaluate the accuracy of currently available guidance systems for agricultural machines. Real pass-to-pass errors (omissions and overlaps) in a field were measured. Consequently, comparison between observed guidance systems was made regarding final working accuracy. Further, intensity of machinery passes, percentage of wheeled area and repeated passes in fields were monitored. These measurements were made in fields under real operating conditions using a conventional tillage system with ploughing and also a conservation tillage system, both systems with randomly organized traffic. Finally, the same parameters were monitored in fields where fixed machinery tracks were used for all operations and passes but only under a conservation tillage system. Pass-to-pass accuracy was measured for the evaluation of different guidance systems. Size of missed areas or overlaps was evaluated statistically. Concerning intensity of machinery passes and total field area affected by machinery passes, the following facts were found out. The experiments with randomized traffic showed a significant difference of the parameters mentioned above between a conventional tillage system with ploughing and a conservation tillage system. Wheeled area was 86 and 64%, respectively which proves benefits of conservation tillage. The experiments with a fixed track system showed that the total run-over area by machinery tyres decreased even more (up to 31%) in comparison to randomized traffic in a field (only fields under conservation tillage system were monitored and evaluated). The following statements based on our results can be made. The navigation and therefore possibility for better accuracy of machinery passes in fields together with permanent machinery tracks utilization could help with soil condition improvement and also energy savings which would result from that. The CTF system will help with further development of a system for soil compaction protection which is currently a real necessity.