共查询到18条相似文献,搜索用时 294 毫秒
1.
2.
3.
4.
日本山口县林业指导中心从今年7月份起将木质颗粒用于冷暖设备的燃料。燃料颗粒作为制冷燃料使用在日本还是首次。 相似文献
5.
德国:可再生能源公司Intrinergy日前置布,其德国子公司CompacTec正在扩大木材颗粒燃料生产能力。在CompacTec工厂,热电联产技术可将再生生物能量转换成热能和电能。热能在制造过程中被用于干燥木质颗粒,而电能则根据德国绿色电力计划,销售给当地电网。 相似文献
6.
今年1月份,欧盟公布了“可再生能源指令”议案,目标之一是到2020年将运输部门可再生燃料消费量增至10%。在运输量不会大幅度降低的情况下,可再生燃料占有率增至10%的目标只能通过大量使用生物燃料来实现,这引起了环境部门和木材工业部门的担心。木质生物能源利用已经从传统木材利用工业部门分流了大量的原材料,今后这个问题可能更加严重。如果不与环境保护相结合,生物燃料需求的增加可能会使生长缓阌均天然林转变为短周期速生人工林和薪炭林。 相似文献
7.
法国:法国制材厂和刨切工厂集团J.&L.Siat公司将从11月开始生产木质燃料颗粒。产能约6.5万t/年,其中大部分为ENplus木质燃料颗粒。11月和12月的试运行完成后,从2013年1月木质燃料颗粒将在法国东部以Granuwood的品名进行批量销售。 相似文献
8.
9.
10.
美国:《北美木质纤维评论》认为,在今后的几十年中,欧洲对于木片、木颗粒燃料和烘烤颗粒燃料等形式的木质生物质能源的需求将会有大幅度增加。需求量到底能增加多少现在还不清楚,因为这要取决于欧盟各成员国政府所执行的政策和给予的补贴。欧洲大陆能提供的生物质尚不能满足很多能源工厂的需要,因而出现了从邻国和海外进口木片和木颗粒燃料的情况。欧洲能源公司目前正大量寻求从美国获得生物质资源。 相似文献
11.
12.
光皮梾木(Cornus wisoniana)是一种优良的能源树种,适种面积广泛,其油脂成分主要包含油酸、亚油酸、棕榈酸、硬脂酸等。笔者以光皮梾木油为原料,采用等体积浸渍法自制Ni/HZSM 5固体催化剂进行催化裂解制备生物烃基燃料。分别考察了反应时间、反应温度和催化剂用量等因素对催化裂解反应的影响,得出最佳单因素工艺参数为反应时间60 min,反应温度440℃,催化剂用量为2.0%(质量分数),在该反应条件下液体产物产率高达79.53%;在单因素试验基础上进行响应面试验条件优化,探讨了各因素之间交互作用对产品转化率的影响,结果表明,各因素的一次项对转化率影响呈现显著水平,其中反应温度对转化率影响最为显著,最佳条件为反应时间59.1 min、反应温度443.7℃、催化剂用量2.3%(质量分数)。产品经气质联用仪(GC MS)分析可知,其主要组成成分为烷烃类、烯烃类、羧酸类、醛类和醇类物质。对所制烃基燃料经燃料性能测定,结果表明,产品接近石化燃料且具有良好的燃料性能,热值为42.720 kJ/g,密度和运动黏度等均达到0#柴油标准,值得进一步深入开展相关研究。 相似文献
13.
《Scandinavian Journal of Forest Research》2012,27(1-4):255-261
The supplier of wood fuels has a large number of interrelated activities to coordinate on the way from raw material source to consumer. Transports, storing and intermediate processing should be decided on for a number of assortments. Storing is a prominent feature of this network flow problem since consumer demand is high when small amounts of raw material become available and vice versa. Storing may, however, change the energy content of the material. This paper presents the effects of these changes on operational planning, procurement and storing policies for a wood fuel supplier. Under the assumptions of the application, it is shown that if these changes are taken fully into account, the efficiency of fuel production can be increased by about seven percent. 相似文献
14.
Forest biomass resources are available in enormous quantities in China.The development of forest biomass briquetting densification fuel,which has a high calorific value,can ease the energy shortage in China.But the molding technology is still at the primary stage with many questions unresolved,such as unequal distribution of resources,imperfect technology and an inadequate mechanism of market supply and demand.There are no consistent production and quality standards to refer to,which seriously hinder the industrialization of biomass molding technology.Hence,it is imperative to speed up the formulation of production standards of biomass briquetting densification fuel which not only conform to international standards,but are in accordance with national conditions in China.Drawing on the standards of biomass briquetting densification fuel in Europe,a standard system should be concerned with raw material collection,transport and storage of the end products,terminology,denomination and classification of molding equipment,as well as with technical conditions,testing methods,safety and environmental protection.The establishment of a standard system is useful for the development of a healthy,orderly and sustainable biomass fuel industry. 相似文献
15.
化石能源的巨大需求和生物燃油成本的改善加剧了对可再生清洁能源的开发和应用研究。植物种子油脂作为提取生物质能—生物柴油的原料,其合成调控机理的研究和应用对石化能源需求的缓解、环境污染等方面具有重要意。本文系统阐述了生物柴油的特性,及植物种子脂肪酸合成、代谢以及转录因子调控机制的研究进展。 相似文献
16.
17.