Evaluation of alternative measures of pork carcass composition

Carcass and live measurements of 203 pigs representing seven genetic populations and four target live weights (100, 114, 128, and 152 kg) were used to evaluate alternative measures of carcass composition. Measures of carcass lean (fat tissue-free lean, FFLM; lipid-free soft tissue, LFSTIS; and dissected lean in the four lean cuts, DL), fat (total carcass fat tissue, TOFAT), and lipid mass (soft tissue lipid, STLIP) were evaluated. Overall, LFSTIS was 22.8% greater than FFLM (47.8 vs 38.9 kg) and TOFAT was 30% greater than STLIP (38.5 vs 29.6 kg). The allometric growth coefficients relative to carcass weight were different for the measures: b = 0.776, 0.828, 0.794, 1.37, and 1.49 for FFLM, LFSTIS, DL, TOFAT, and STLIP, respectively. At 90 kg carcass weight, the predicted growth of FFLM, LFSTIS, TOFAT, and STLIP was 0.314, 0.420, 0.553, and 0.446 kg/kg increase in carcass weight. The difference between FFLM and LFSTIS, representing nonlipid components of the carcass fat tissue, was greater for barrows than for gilts (9.2 vs 8.6 kg). Lipid-free soft tissue mass was predicted more accurately from carcass or live animal measurements than FFLM with smaller relative RSD (4.6 vs 6.5% of their mean values). The alternative measures of carcass composition were evaluated as predictors of empty body protein (MTPRO) and lipid (MTLIP) mass. Empty body protein was predicted with similar accuracy (R2 = 0.74 to 0.81) from either DL, FFLM, LFSTIS, or ribbed carcass measurements. Empty body lipid was predicted more accurately from TOFAT (R2 = 0.92) or STLIP (R2 = 0.93) than ribbed carcass measurements (R2 = 0.88). Although the alternative measures of lean mass (LFSTIS vs FFLM) and lipid mass (TOFAT vs STLIP) were highly related to each other (r = 0.93 to 0.98), they had different relative growth rates (allometric coefficients) and thus cannot be predicted as linear functions of the similar alternative variable without significant weight group biases. From the 100- to 152-kg target weight groups, gilts gained 12.9% greater FFLM and 12.1% greater MTPRO but only 4.4% greater LFSTIS than barrows. Fat-free lean mass is more precise as a measure of muscle growth and as a predictor of lysine requirements. Lipid-free soft tissue can be obtained more quickly and predicted more accurately from carcass or live animal measurements.     

Genotype and treatment biases in estimation of carcass lean of swine.

Carcasses of 181 barrows, representing five genotypes, 1) H x HD, 2) SYN, 3) HD x L[YD], 4) L x YD, and 5) Y x L (H = Hampshire, D = Duroc, SYN = synthetic terminal sire line, L = Landrace, and Y = Yorkshire), and two levels of ractopamine (RAC) treatment (0 and 20 ppm) were completely dissected and the data were used to examine genotype and treatment (RAC) biases in estimation of fat-standardized lean weight and to evaluate accuracies and precisions realized by use of equations based on variables derived from different technologies. Independent variables used to establish regression equations represented technologies of direct carcass measurements, optical probe data, TOBEC (total body electrical conductivity) readings, and dissected (DHMLN) and fat-standardized (FSHMLN) ham lean. Genotype bias existed when any equation from a single technology was used and was minimized by combining FSHMLN with one TOBEC reading, carcass length, and the probe measurement of 10th rib fat depth. Large RAC biases appeared when equations from direct carcass measurements or optical probe data were used and were minimized by an equation using either DHMLN or FSHMLN. A practical equation with relatively high R2 value and small genotype and RAC biases were developed by combining TOBEC readings with direct carcass measurements of 10th rib fat depth and warm carcass weight.     

Effects of ractopamine on performance and composition of pigs phenotypically sorted into fat and lean groups

Crossbred barrows (n = 144; 80 kg) from four farrowing groups were phenotypically selected into fat (FAT) and lean (LEAN) pens using ultrasound. The difference in 10th-rib fat depth between the LEAN and FAT groups was > or =0.5 cm. Within a farrowing group, pigs were assigned to pens (five pigs per pen and eight pens per phenotype) to equalize pen weight and fat depth. Pigs were fed a corn-soybean meal diet containing 19% CP, 1.0% added animal/vegetable fat, and 1.1% lysine (as-fed basis). Half the pens received 10 ppm (as-fed basis) of ractopamine (RAC) during the 28-d finishing phase. At 7-d intervals, live weight and feed disappearance were recorded to calculate ADG, ADFI, and G:F, and 10th-rib fat depth and LM area were ultrasonically measured to calculate fat-free lean and fat and muscle accretion rates. During the first 7 d on feed, LEAN pigs fed RAC gained less (P < 0.05) than FAT pigs fed RAC or LEAN and FAT pigs fed the control diet (RAC x phenotype; P = 0.02); however, RAC did not (P > 0.25) affect ADG after the second, third, and fourth weeks, or over the entire 28-d feeding period. Although wk-2 and -3 ADG were higher (P < or = 0.03) in LEAN than in FAT pigs, phenotype did not (P = 0.08) affect overall ADG. Dietary RAC decreased (P < or = 0.05) ADFI over the 28-d feeding trial, as well as in wk 2, 3, and 4, but intake was not (P > 0.20) affected by phenotype. Neither RAC nor phenotype affected (P > 0.10) G:F after 7 d on trial; however, RAC improved (P < or = 0.04) wk-3, wk-4, and overall G:F. Lean pigs were more efficient (P < or = 0.05) in wk 2 and 3 and over the duration of the trial than FAT pigs. Ultrasound LM accretion (ULA) was not (P > or = 0.10) affected by RAC; however, LEAN pigs had greater (P < or = 0.02) ULA in wk 2 and 4 than FAT pigs. Although fat depth was lower (P < 0.01) in RAC-fed pigs than pigs fed the control diet, ultrasound fat accretion rate indicated that RAC-pigs deposited less (P = 0.04) fat only during wk 4. In addition, calculated fat-free lean (using ultrasound body fat, ULA, and BW) was increased (P < 0.05) in RAC pigs after 3 and 4 wk of supplementation. In conclusion, RAC enhanced the performance of finishing swine through decreased ADFI and increased G:F, whereas carcass lean was enhanced through decreases in carcass fat and increases in carcass muscling.     

Effects of increasing lysine on carcass composition and cutting yields of immunologically castrated male pigs

The objective of this experiment was to determine if increasing lysine in the diets of immunologically castrated (IC) male pigs would increase percentage fat free lean and carcass cutting yields when compared with physical castrates. The anti-gonadotropin-releasing factor (GnRF) immunological product (Improvest, Pfizer Animal Health) is used worldwide to immunologically castrate entire male pigs to control boar taint and take advantage of the inherent ability of the entire male to deposit more muscle, less fat, and grow more efficiently than physically castrated males. The immunization process essentially allows the pig to grow as an entire male pig for most of its life and then removes any boar odor (boar taint) before slaughter. Reported lean meat advantages may also provide economic benefits to the domestic meat industry. Approximately 1,200 male pigs [physical castrates, IC males, and entire males] were each assigned to 1 of 4 diet programs which differed in lysine content. In each case, lysine was fed in a conventional step-down program that culminated with the following concentrations in the late finishing diet: physical castrates fed low lysine (0.7%), IC fed low lysine (0.7%), IC fed low/medium lysine (0.8%), IC fed medium/high lysine (0.9%), IC fed high lysine (1.0%), and entire males fed high lysine (1.0%). At 25 wk of age (5 wk post-second injection), pigs were individually weighed and the 2 pigs (n=96) in each pen closest to the median pig BW were selected and slaughtered. The right side of each carcass was dissected into soft tissue, skin, and bone. Proximate composition was determined on the soft tissue to determine percentage fat-free lean. The left side of each carcass was weighed and initially fabricated into ham, loin, belly, and whole shoulder. Each primal piece was weighed again and further fabricated into respective subprimal cuts. Immunological castration did not change (P>0.05) shear force values or ultimate pH when compared with either physical castrates or entire males. Marbling appeared to decrease as dietary lysine was increased among IC males. As expected, IC males had a greater (P<0.05) percentage fat-free lean than physical castrates but less (P<0.05) than entire males. Immunologically castrated males fed diets with medium/high and high lysine had greater (P<0.05) lean cutting yields and carcass cutting yields than physical castrates. Lean cutting yield and carcass cutting yields appeared to increase as dietary lysine was increased among IC males. Overall, immunological castration improved carcass cutability, increased percentage fat free lean, and had no effect on pork quality when compared with physical castrates.     

Gluteus medius and rump fat depths as additional live animal ultrasound measurements for predicting retail product and trimmable fat in beef carcasses.

This study was conducted to determine the ability of additional ultrasound measures to enhance the prediction accuracy of retail product and trimmable fat yields based on weight and percentage. Thirty-two Hereford-sired steers were ultrasonically measured for 12th-rib fat thickness, longissimus muscle area, rump fat thickness, and gluteus medius depth immediately before slaughter. Chilled carcasses were evaluated for USDA yield grade factors and then fabricated into closely trimmed, boneless subprimals with 0.32 cm s.c. fat. The kilogram weight of end-point product included the weight of trimmed, boneless subprimals plus lean trim weights, chemically adjusted to 20% fat, whereas the fat included the weight of trimmed fat plus the weight of fat in the lean trim. Prediction equations for carcass yield end points were developed using live animal or carcass measurements, and live animal equations were developed including ultrasound ribeye area or using only linear measurements. Multiple regression equations, with and without ultrasound rump fat thickness and gluteus medius depth, had similar R2 values when predicting kilograms of product and percentages of product, suggesting that these alternative variables explained little additional variation. Final unshrunk weight and ultrasound 12th-rib fat thickness explained most of the variation when predicting kilograms of fat. Rump fat and gluteus medius depth accounted for an additional 10% of the variation in kilograms of fat, compared with the equation containing final weight, ultrasound ribeye area, and ultrasound 12th-rib fat thickness; however, the two equations were not significantly different. Prediction equations for the cutability end points had similar R2 values whether live animal ultrasound measurements or actual carcass measurements were used. However, when ultrasound ribeye area was excluded from live animal predictions, lower R2 values were obtained for kilograms of product (0.81 vs 0.67) and percentages of product (0.41 vs 0.17). Conversely, the exclusion of ultrasound ribeye area had little effect on the prediction accuracy for kilograms of fat (0.75 vs 0.74) and percentage fat (0.50 vs 0.40). These data substantiate the ability of live animal ultrasound measures to accurately assess beef carcass composition and suggest that the alternative ultrasound measures, rump fat and gluteus medius depth, improve the accuracy of predicting fat-based carcass yields.     

Interactive effect of ractopamine and dietary fat source on pork quality characteristics of fresh pork chops during simulated retail display

Crossbred pigs (n = 216) were used to test the interactive effect, if any, of ractopamine (RAC) and dietary fat source on the performance of finishing pigs, pork carcass characteristics, and quality of LM chops during 5 d of simulated retail display (2.6 degrees C and 1,600 lx warm-white fluorescent lighting). Pigs were blocked by BW and allotted randomly to pens (6 pigs/pen), and, after receiving a common diet devoid of RAC for 2 wk, pens within blocks were assigned randomly to 1 of 4 diets in a 2 x 2 factorial arrangement, with 5% fat [beef tallow (BT) vs. soybean oil (SBO)] and RAC (0 vs. 10 mg/kg). Diets were formulated to contain 3.1 g of lysine/Mcal of ME and 3.48 Mcal/kg of ME. Across the entire 35-d trial, pigs fed RAC had greater (P < 0.01) ADG and G:F, but RAC did not affect (P = 0.09) ADFI; however, performance was not affected (P >or= 0.07) by dietary fat source. Carcass weight, LM depth, and lean muscle yield were increased (P < 0.01), whereas fat depth was decreased (P = 0.01), in carcasses from RAC-fed pigs; however, carcass composition measures were similar (P >or= 0.27) between fat sources. Feeding 10 mg/kg of RAC reduced (P 相似文献   

Predicting tissue distribution and partitioning in terminal sire sheep using x-ray computed tomography

The utility of x-ray computed tomography (CT) scanning in predicting carcass tissue distribution and fat partitioning in vivo in terminal sire sheep was examined using data from 160 lambs representing combinations of 3 breeds (Charollais, Suffolk, and Texel), 3 genetic lines, and both sexes. One-fifth of the lambs were slaughtered at each of 14, 18, and 22 wk of age, and the remaining two-fifths at 26 wk of age. The left side of each carcass was dissected into 8 joints with each joint dissected into fat (intermuscular and subcutaneous), lean, and bone. Chemical fat content of the LM was measured. Tissue distribution was described by proportions of total carcass tissue and lean weight contained within the leg, loin, and shoulder regions of the carcass and within the higher-priced joints. Fat partitioning variables included proportion of total carcass fat contained in the subcutaneous depot and intramuscular fat content of the LM. Before slaughter, all lambs were CT scanned at 7 anatomical positions (ischium, midshaft of femur, hip, second and fifth lumbar vertebrae, sixth and eighth thoracic vertebrae). Areas of fat, lean, and bone (mm(2)) and average fat and lean density (Hounsfield units) were measured from each cross-sectional scan. Areas of intermuscular and subcutaneous fat were measured on 2 scans (ischium and eighth thoracic vertebra). Intramuscular fat content was predicted with moderate accuracy (R(2) = 56.6) using information from only 2 CT scans. Four measures of carcass tissue distribution were predicted with moderate to high accuracy: the proportion of total carcass (R(2) = 54.7) and lean (R(2) = 46.2) weight contained in the higher-priced joints and the proportion of total carcass (R(2) = 77.7) and lean (R(2) = 55.0) weight in the leg region. Including BW in the predictions did not improve their accuracy (P > 0.05). Although breed-line-sex combination significantly affected fit of the regression for some tissue distribution variables, the values predicted were changed only trivially. Within terminal sire type animals, using a common set of prediction equations is justified. Tissue distribution and fat partitioning affect eating satisfaction and efficiency of production and processing; therefore, including such carcass quality measures in selection programs is increasingly important, and CT scanning appears to provide opportunities to do so.     

Evaluation of procedures to predict fat-free lean in swine carcasses

The objectives were to develop equations for predicting fat-free lean in swine carcasses and to estimate the prediction bias that was due to genetic group, sex, and dietary lysine level. Barrows and gilts (n = 1,024) from four projects conducted by the National Pork Board were evaluated by six procedures, and their carcass fat-free lean was determined. Pigs of 16 genetic groups were fed within weight groups one of four dietary regimens that differed by 0.45% in lysine content and slaughtered at weights between 89 and 163 kg. Variables in equations included carcass weight and measures of backfat depth and LM. Fat-free lean was predicted from measures of fat and muscle depth measured with the Fat-O-Meater (FOM), Automated Ultrasonic System (AUS), and Ultrafom (UFOM) instruments, carcass 10th-rib backfat and LM area (C10R), carcass last-rib backfat (CLR), and live animal scan of backfat depth and LM area with an Aloka 500 instrument (SCAN). Equations for C10R (residual standard deviation, RSD = 2.93 kg) and SCAN (RSD = 3.06 kg) were the most precise. The RSD for AUS, FOM, and UFOM equations were 3.46, 3.57, and 3.62 kg, respectively. The least precise equation was CLR, for which the RSD was 4.04 kg. All procedures produced biased predictions for some genetic groups (P < 0.01). Fat-free lean tended to be overestimated in fatter groups and underestimated in leaner ones. The CLR, FOM, and AUS procedures overestimated fat-free lean in barrows and underestimated it in gilts (P < 0.01), but other procedures were not biased by sex. Bias due to dietary lysine level was assessed for the C10R, CLR, FOM, and SCAN procedures, and fat-free lean in pigs fed the lowlysine dietary regimen was overestimated by CLR, FOM, and SCAN (P < 0.05). Positive regressions of residuals (measured fat-free lean minus predicted fat-free lean) on measured fat-free lean were found for each procedure, ranging from 0.204+/-0.013 kg/kg for C10R to 0.605+/-0.049 kg/kg for UFOM, indicating that all procedures overestimated fat-free lean in fat pigs and underestimated it in lean pigs. The pigs evaluated represent the range of variation in pigs delivered to packing plants, and thus the prediction equations should have broad application within the industry. Buying systems that base fat-free lean predictions on measures of carcass fat depth and muscle depth or area will overvalue fat pigs and undervalue lean pigs.     

Effect of dietary betaine on nutrient utilization and partitioning in the young growing feed-restricted pig

The purpose of this study was to examine the effects of dietary betaine over a range of concentrations (between 0 and 0.5%) on growth and body composition in young feed-restricted pigs. Betaine is associated with decreased lipid deposition and altered protein utilization in finishing pigs, and it has been suggested that the positive effects of betaine on growth and carcass composition may be greater in energy-restricted pigs. Thirty-two barrows (36 kg, n = 8 pigs per group) were restrictively fed one of four corn-soybean meal-skim milk based diets (18.6% crude protein, 3.23 Mcal ME/kg) and supplemented with 0, 0.125, 0.25, or 0.5% betaine. Feed allotment was adjusted weekly according to BW, such that average feed intake was approximately 1.7 kg for all groups. At 64 kg, pigs were slaughtered and visceral tissue was removed and weighed. Carcasses were chilled for 24 h to obtain carcass measurements. Subsequently, one-half of each carcass and whole visceral tissue were ground for chemical analysis. Linear regression analysis indicated that, as betaine content of the diet was elevated from 0 to 0.5%, carcass fat concentration (P = 0.06), P3 fat depth (P = 0.14) and viscera weight (P = 0.129) were decreased, whereas total carcass protein (P = 0.124), protein deposition rate (P = 0.98), and lean gain efficiency (P = 0.115) were increased. The greatest differences over control pigs were observed in pigs consuming 0.5% betaine, where carcass fat concentration and P3 fat depth were decreased by 10 and 26%, respectively. Other fat depth measurements were not different (P > 0.15) from those of control pigs. In addition, pigs consuming the highest betaine level had a 19% increase in the carcass protein:fat ratio, 23% higher carcass protein deposition rate, and a 24% increase in lean gain efficiency compared with controls. Dietary betaine had no effects (P > 0.15) on growth performance, visceral tissue chemical composition, carcass fat deposition rate, visceral fat and protein deposition rates, or serum urea and ammonia concentrations. These data suggest that betaine alters nutrient partitioning such that carcass protein deposition is enhanced at the expense of carcass fat and in part, visceral tissue.     

Interactive effect of ractopamine and dietary fat source on quality characteristics of fresh pork bellies

Crossbred pigs (n = 216) were used to test the interaction, if any, of ractopamine (RAC) and dietary fat source on the characteristics of fresh pork bellies. Pigs were blocked by BW (77.6 +/- 6.5 kg) and allotted randomly to pens (6 pigs/pen). After receiving a common diet devoid of RAC for 2 wk, pens within blocks were assigned randomly to 1 of 4 treatments arranged in a 2 x 2 factorial design, with 5% fat (beef tallow vs. soybean oil) and RAC (0 vs. 10 mg/kg). At the conclusion of the 35-d feeding period, pigs were slaughtered at a commercial pork packing plant (average BW of 108.8 +/- 0.6 kg), and fresh bellies were captured during carcass fabrication. Neither RAC (P = 0.362) nor fat source (P = 0.247) affected belly thickness. Subjective (bar-suspension) or objective (compression test) measures of belly firmness were not (P > or = 0.148) affected by the inclusion of RAC in the diet; however, bellies from pigs fed soybean oil (SBO) were softer than those from pigs fed beef tallow (BT), as indicated by perpendicular (P < or = 0.005) and parallel (P < 0.001) suspensions. Moreover, bellies from BT-fed pigs required more (P = 0.096) force to compress 50% of their thickness than bellies from SBO-fed pigs (52.29 vs. 43.51 kg). Color (L*, a*, and b* values) of the belly lean and fat was not (P > or = 0.131) affected by RAC, and lean color was similar (P > or = 0.262) between fat sources; however, belly fat from BT-fed pigs was lighter (P = 0.030) and redder (P = 0.013) in color than belly fat from SBO-fed pigs. Bellies of SBO-fed pigs had greater (P < 0.001) proportions of PUFA and lower (P < 0.001) proportions of SFA and MUFA than belly fat from pigs fed BT. Regardless of the RAC inclusion level, PUFA:SFA and iodine values were lower in belly fat from pigs fed BT than SBO; however, within SBO-fed pigs, PUFA:SFA and iodine values were further increased by feeding RAC (RAC x fat source, P < 0.001). As expected, dietary fat source altered the fatty acid composition of fresh pork bellies, which subsequently impacted fresh belly firmness. Interestingly, including RAC in swine finishing diets exacerbated the effect of feeding SBO on pork fat polyunsaturation.     

Effects of ractopamine, genotype, and growth phase on finishing performance and carcass value in swine: II. Estimation of lean growth rate and lean feed efficiency

A replicated factorial experiment using 183 individually fed crossbred barrows was conducted. The pigs were fed an 18.5% CP (.95% lysine) diet with 3.594 kcal of ME/kg. The effects of five genotypes (GT): 1) Hampshire (H) X (H X Duroc [D]), 2) synthetic terminal sire line, 3) (H X D) X (Landrace [L] X [Yorkshire (Y) X D]), 4) L X (Y X D), and 5) Y X L; two levels of ractopamine (RAC) treatment: 0 and 20 ppm; and three treatment weight periods (WT): 1) 59 to 100, 2) 73 to 114, and 3) 86 to 127 kg live weight on ADG of dissected lean (ADLG) and fat standardized lean adjusted to 10% fat content (ADSLG) and feed efficiency of ADLG (LFE) and ADSLG (SLFE) were evaluated. Initial carcass lean quantity of each individual animal was determined by a regression equation (R2 = .95) generated from 30 additional barrows (six per GT) slaughtered at 59 kg and 30 (six per GT) untreated pigs slaughtered at 100 kg average live weight. Logarithmic and reciprocal transformations of dependent variables were used to stabilize heterogeneous variances and to improve normality of the residuals. Ractopamine increased (P less than .0001) ADLG, ADSLG, LFE, and SLFE, respectively, by 19.5, 25.0, 19.6, and 25.5%. Differences (P less than .001) were observed among genotypes for all traits, showing that considerable variation existed in the data and indicating that genetic improvement can be realized through the identification and selection of superior genotypes.(ABSTRACT TRUNCATED AT 250 WORDS)     

Use of carbohydrate and fat as energy source by obese and lean swine

Genetically obese and lean pigs were fed isonitrogenous-isoenergetic (digestible energy) amounts of a high or low fat diet from 25 kg body weight. Obese pigs gained less and required more feed per unit gain than lean pigs. Lean pigs were more muscular with less fat than obese pigs. Obese pigs utilized more dietary amino acids for energy (greater plasma urea N) than did lean pigs. Weight gain was similar at all intermediate periods in obese pigs fed the two diets. However, gain tended (P less than or equal to .10) to be greater and the ratio of dietary energy intake to gain tended (P less than or equal to .10) to be less in obese pigs fed high compared with low fat diets. Similar results were observed in lean pigs fed the two diets. The high fat diet produced more carcass adipose tissue deposition in both strains after 20 wk of feeding (detectable by ultrasound at 14, but not at 7 wk). Adipose tissue lipogenic rate (glucose incorporation) was similarly depressed by fat feeding in both obese and lean pigs. Obese and lean pigs both utilized dietary carbohydrate and fat differentially but there was no indication of genetic divergence regarding this utilization. In both strains of pigs, energy from the fat-enriched diet was preferentially partitioned into carcass adipose tissue.     

Prediction of swine carcass composition by total body electrical conductivity (TOBEC)

An experiment was conducted to determine prediction equations that used readings for total body electrical conductivity (TOBEC) in the model for estimation of total fat-free lean and total fat weight in the pork carcass. Ultrasound measurements of live hogs were used to select 32 gilts that represented a range in weight, muscling, and fatness. The TOBEC readings were recorded on warm carcass sides, chilled carcass sides, and the untrimmed ham from the left carcass side. Physical dissection and chemical analyses determined fat-free lean and fat weight of the carcass. All of the ham tissues were analyzed separately from the remainder of the carcass tissues to incorporate ham measurements for prediction of total fat-free lean and total fat weight in the entire carcass. Prediction equations were developed using stepwise regression procedures. An equation that used a warm carcass TOBEC reading in the model was determined to be the best warm TOBEC equation (R2 = 0.91; root mean square error = 0.81). A three-variable equation that used chilled carcass TOBEC reading, chilled carcass temperature, and carcass length in the model was determined to be the best chilled TOBEC equation (R2 = 0.93; root mean square error = 0.73). A four-variable equation that included chilled carcass side weight, untrimmed ham TOBEC reading, ham temperature, and fat thickness beneath the butt face of the ham in the model was determined to be the best equation overall (R2 = 0.95; root mean square error = 0.65). The TOBEC and the fat-free lean weight of the ham are excellent predictors of total carcass fat-free lean weight.     

Effect of dietary lysine level and environmental temperature during the finishing phase on the intramuscular fat content of pork

This study was designed to investigate the effects of dietary lysine level on the intramuscular fat content of the longissimus in finishing pigs reared at two environmental temperatures. Seventy-two hybrid gilts were individually penned and given ad libitum access to either a diet formulated to meet their lysine requirement (6.4 g/kg lysine) or a lysine-deficient diet (4.8 g/kg). Pigs were held at one of two environmental temperatures (thermoneutral [18 degrees C] or hot [32 degrees C]). The study was carried out between approximately 90 and 126 kg live weight; pigs in the thermoneutral and hot environments were on test for 5 and 7 wk, respectively. There were no interactions between dietary lysine level and environmental temperature. Dietary lysine content did not influence feed intake or average daily gain; however, pigs on the lysine-deficient diet had a poorer gain:feed ratio than those fed to requirement (P < .01). High environmental temperature decreased feed intake (P < .001) and average daily gain (P < .01) but improved gain:feed ratio (P < .01). Backfat at the 10th rib was increased and loin eye area and estimated percentage lean in the carcass were decreased for pigs on the lysine-deficient diet. The higher environmental temperature resulted in an increase in carcass length but had no effect on other carcass measurements or intramuscular fat. Feeding the lysine-deficient diet resulted in an increase of .55 percentage unit in longissimus intramuscular fat content (P < .01); however, there was no difference in subjective marbling scores between the diets. Warner-Bratzler shear force values were not affected by dietary lysine level or environmental temperature. Results from this study suggest that feeding of lysine-deficient diets at the end of the finishing period can increase intramuscular fat deposition under thermoneutral and hot conditions.     

Analysis of body composition changes of swine during growth and development.

This study was conducted to model the growth of carcass, viscera, and empty body components and component composition of pigs. Quantitative tissue and chemical composition of 319 swine, representative of barrows and gilts from five commercial genetic populations, was determined at eight stages of growth between 25 and 152 kg. After whole body grinding and carcass dissection, proximate analyses were performed to calculate concentrations of protein, lipid, moisture, and ash of carcass, viscera, empty body, carcass lean, and carcass fat. Linear and nonlinear equations were developed to investigate the growth patterns of each component. Nonlinear growth functions accounted for the greatest amount of variation in empty body protein, lipid, moisture, and ash mass. Differences (P < .05) existed between barrows and gilts for nearly all components investigated. Carcass lean and fat tissues significantly increased in lipid percentage and decreased in moisture percentage as live weight increased. There were significant changes in the ratio and composition of the tissues of barrows and gilts during growth. Nonlinear models fitted the data better than allometric equations for nearly all of the components investigated.     

Prediction of lean parts and carcass price from ultrasonic backfat measurements in live pigs

The possibilities of predicting carcass composition and carcass price from live weight and ultrasonically measured backfat thickness on the live animal were investigated. Three data sets of pigs which differed considerably in average production results and standard deviations were analysed. All pigs (n = 536) were weighed at commercial slaughter weight (105–110 kg), and depth of subcutaneous fat over M. longissimus dorsi was measured ultrasonically on four positions. In one data set, pigs were measured on both sides by two operators with two different backfat meters (Renco LM and USK6). All animals were slaughtered at commercial slaughter weight. Carcasses were classified according to the EC classification scheme and dissected to determine lean parts percentage. It was concluded that the effects of side, operator and instrument on the accuracy of predicting lean parts percentage, kg lean parts in the carcass, price per kg carcass and total price per carcass were of minor importance. As a result of differences in original variation, the prediction accuracies between data sets differed considerably. No single backfat measurement position, or combination of positions, was uniformly the best at predicting lean parts or carcass price in all 3 data sets. By combining live weight and fat depths of two or more positions, about 50–68% of the variance in lean parts percentage could be explained, resulting in residual standard deviations of 2.40-1.80%. Predictions of the price per kg carcass and the price of the whole carcass were much more inaccurate; only 12–39% of the initial variance could be explained. This could be explained by the inconsistent criteria for the classes in the EC classification system.It is argued that in a grading system based on estimated meat percentage in the carcass, and with acceptance of this trait as a selection objective, the value of ultrasonically measured backfat thickness as a criterion in selection indices will increase.     

Effect of a ractopamine feeding program on growth performance and carcass composition in finishing pigs

Barrows and gilts (n = 100 per gender) were used to determine the effects of an increasing, decreasing, or constant ractopamine (RAC) dietary concentration on growth performance and carcass characteristics. Pigs, within a gender, were assigned randomly to pens (five pigs per pen and 10 pens per treatment). Pens were assigned randomly to one of four dietary treatments at a starting weight of 71.2 kg, to target an average ending weight of 109 kg. The four dietary treatments (as-fed basis) were 1) control = 0 ppm RAC, wk 0 to 6; 2) RAC step-up = 5.0 ppm, wk 1 to 2; 10.0 ppm, wk 3 to 4; and 20.0 ppm, wk 5 to 6; 3) RAC step-down = 20.0 ppm, wk 1 to 2; 10.0 ppm, wk 3 to 4; and 5.0 ppm, wk 5 to 6; and 4) RAC constant = 11.7 ppm, wk 0 to 6. Feed allocation was recorded daily, and pigs were weighed and feed was weighed back every 2 wk. Jugular blood samples were obtained from two randomly selected pigs per pen on d -3, 7, 21, 35, and 41 for determination of plasma urea nitrogen (PUN) concentrations. Two pigs were selected randomly per pen and sent to a commercial slaughter facility at the end of the 6-wk experimental period. Carcass data were evaluated on an equal time basis and on an equal weight basis by using hot carcass weight (HCW) as a covariate. Overall, ADG and G:F were improved (P < 0.05) for pigs fed RAC compared with control, with no differences among RAC feeding programs. In wk 3 and 4, improvements (P < 0.05) in ADG and G:F were realized with the implementation of a RAC step-up program compared with control pigs. The concentrations of PUN were decreased (P < 0.05) at d 7 and 21 with RAC feeding, and a RAC step-up program maintained the decrease (P < 0.05) in PUN through d 35 and 41. A RAC step-up and constant program increased (P < 0.05) HCW and percent yield. Loin muscle area and percentage of fat-free lean increased (P < 0.05) and backfat thickness decreased (P < 0.05) in pigs fed RAC. If pigs were considered to be on feed for an equal time period, advantages (P < 0.05) were observed for weight of boneless trimmed ham, shoulder and loin for the step-up and constant RAC treatments compared with the controls. Feeding a RAC step-up or constant feeding program resulted in favorable responses in growth performance and yielded more lean pork.     

Genetic correlations between live yearling bull and steer carcass traits adjusted to different slaughter end points. 1. Carcass lean percentage

We studied genetic relationships between age-constant live yearling beef bull growth and ultrasound traits and steer carcass traits with dissected steer carcass lean percentage adjusted to slaughter age-, HCW-, fat depth-, and marbling score-constant end points. Three measures of steer carcass lean percentage were used. Blue Tag lean percentage (BTLean) was predicted from HCW, fat depth, and LM area measurements. Ruler lean percentage (RulerLean) was predicted from carcass fat depth and LM depth and width measurements. Dissected lean percentage (DissLean) was based on dissection of the 10-11-12th rib section. Both BTLean (h2 = 0.30 to 0.44) and DissLean (h2 = 0.34 to 0.39) were more heritable than RulerLean (h2 = 0.05 to 0.14) at all end points. Genetic correlations among DissLean and RulerLean (rg = 0.61 to 0.70), DissLean and BTLean (rg = 0.56 to 0.72), and BTLean and RulerLean (rg = 0.59 to 0.90) indicated that these traits were not genetically identical. Adjusting Diss-Lean to different end points changed the magnitude, but generally not the direction, of genetic correlations with indicator traits. Ultrasound scan-age-constant live yearling bull lean percentage estimates were heritable (h2 = 0.26 to 0.42) and genetically correlated with each other (rg = 0.68 to 0.99) but had greater correlations with DissLean at slaughter age (rg = 0.24 to 0.48) and HCW (rg = 0.16 to 0.40) end points than at fat depth (rg = -0.08 to 0.13) and marbling score (rg = 0.02 to 0.11) end points. Scan-age-constant yearling bull ultrasound fat depth also had stronger correlations with DissLean at slaughter age (rg = -0.34) and HCW (rg = -0.25) than at fat depth (rg = -0.02) and marbling score (rg = -0.03) end points. Yearling bull scan-age-constant ultrasound LM area was positively correlated with DissLean at all endpoints (rg = 0.11 to 0.23). Genetic correlations between yearling bull LM method 1 width (rg = 0.38 to 0.56) and method 2 depth (rg = -0.17 to -0.38) measurements with DissLean suggested that LM shape may be a valuable addition to genetic improvement programs for carcass lean percentage at slaughter age, HCW, and fat depth constant end points. At all end points, steer carcass fat depth (rg = -0.60 to -0.64) and LM area (rg = 0.48 to 0.59) had stronger associations with DissLean than did corresponding live yearling bull measurements. Improved methods that combine live ultrasound and carcass traits would be beneficial for evaluating carcass lean percentage at fat depth or marbling score end points.     

Some effects on the growth and composition of the car cass of the bacon pig of feeding micronized or ground maize or barley based diets to give three different digestible energy intakes

In a 2 × 2 × 3 factorial experiment 144 Large White pigs were individually fed, between 25 and 90 kg live weight, maize (M) or barley (B) based diets in ground (g) or micronized (m) forms at three different levels of digestible energy (DE) intake. Relative to live weight all pigs received similar daily quantities of crude protein and total lysine. At the lowest energy intake (L) each gram of crude protein was fed with 74J of DE: at the two other intakes the DE was increased by 10.5% (E) and 21.0% (H). The daily intake of total lysine was 4.8% of the crude protein intake. In formulating the diets the difference in DE content between gM and gB was taken as 16.7% and the differences between mM and gM and mB and gB were taken as 6.4% and 4.3% respectively.There were no significant first- or second-order interactions for growth rates or carcass composition data. The B and g based diets induced growth rates which were significantly greater than the M and m based diets by 2.7% and 4.6% respectively. There were no significant differences between cereals or processing treatments in carcass composition. Increasing energy intake significantly increased growth rates and killing-out percentages but decreased eye muscle areas and lean percentages in the carcass.     

Commercial adaptation of ultrasonography to predict pork carcass composition from live animal and carcass measurements.

Live animal and carcass data were collected from market barrows and gilts (n = 120) slaughtered at a regional commercial slaughter facility to develop and test prediction equations to estimate carcass composition from live animal and carcass ultrasonic measurements. Data from 60 animals were used to develop these equations. Best results were obtained in predicting weight and percentage of boneless cuts (ham, loin, and shoulder) and less accuracy was obtained for predicting weight and ratio of trimmed, bone-in cuts. Independent variables analyzed for the live models were live weight, sex, ultrasonic fat at first rib, last rib, and last lumbar vertebra, and muscle depth at last rib. Independent variables for the carcass models included hot carcass weight, sex of carcass, and carcass ultrasonic measurements for fat at the first rib, last rib, last lumbar vertebra, and muscle depth at last rib. Equations were tested against an independent set of experimental animals (n = 60). Equations for predicting weight of lean cuts, boneless lean cuts, fat-standardized lean, and percentage of fat-standardized lean were most accurate from both live animal and carcass measurements with R2 values between .75 and .88. The results from this study, under commercial conditions, suggest that although live animal or carcass weight and sex were the greatest contributors to variation in carcass composition, ultrasonography can be a noninvasive means of differentiating value, especially for fat-standardized lean and weight of boneless cuts.