Development of ensemble pedotransfer functions for cation exchange capacity of soils of Qingdao in China

Soil cation exchange capacity (CEC), which is considered to be an indicator of buffering capacity, is an important soil attribute that influences soil fertility but is costly, time‐consuming and labour‐intensive to measure. Pedotransfer functions (PTFs) have routinely been used to predict soil CEC from easily measured soil properties, such as soil pH, texture and organic matter content. However, uncertainty in which one to select can be substantial as different PTFs do not necessarily produce the same result. In this study, a total of 100 soil samples were collected from surface horizons (0–20 cm) in different regions of Qingdao City, China. Three ensemble PTFs (ePTFs), including simple ensemble mean (SEM), individually bias‐removed ensemble mean (IBREM) and collective bias‐removed ensemble mean (CBREM), were developed to reduce the uncertainty in CEC prediction based on 12 published regression‐based PTFs. In addition, a local PTF (LPTF) for CEC was also developed using multiple stepwise regression and basic soil properties. The performances of the three ePTFs were compared with those of the published PTFs and LPTF. Results show that the differences between the performances of the published PTFs were substantial. When the systematic bias of each published PTF was removed separately, the prediction capability of the PTFs was increased. The performance of LPTF was significantly better than that of SEM, but slightly worse than IBREM. It is noted that CBREM had higher accuracy than all of the other methods. Overall, CBREM is a promising approach for estimating soil CEC in the study area.     

Digital mapping of cation exchange capacity using genetic programming and soil depth functions in Baneh region,Iran

This study evaluates the performances of a combination of genetic programming and soil depth functions to map the three-dimensional distribution of cation exchange capacity (CEC) in a semiarid region located in Baneh region, Iran. Using the conditioned Latin hypercube sampling method, the locations of 188 soil profiles were selected, which were then sampled and analyzed. In general, results showed that equal-area quadratic splines had the highest R², 89%, in fitting the vertical CEC distribution compared to power and logarithmic functions with R² of 81% and 84%, respectively. Our findings indicated some auxiliary variables had more influence on the prediction of CEC. Normalized difference vegetation index (NDVI) had the highest correlation with CEC in the upper two layers. However, the most important auxiliary data for prediction of CEC in 30–60 cm and 60–100 cm were topographic wetness index and profile curvature, respectively. Validation of the predictive models at each depth interval resulted in R² values ranging from 66% (0–15 cm) to 19% (60–100 cm). Overall, results indicated the topsoil can be reasonably well predicted; however, the subsoil prediction needs to be improved. We can recommend the use of the developed methodology in mapping CEC in other parts in Iran.     

青海三江源地区土壤容重转换函数的建立与比较

Bulk density (BD) is an important soil physical property and has significant effect on soil water conservation function. Indirect methods, which are called pedotransfer functions (PTFs), have replaced direct measurement and can acquire the missing data of BD during routine soil surveys. In this study, multiple linear regression (MLR) and artificial neuron network (ANN) methods were used to develop PTFs for predicting BD from soil organic carbon (OC), texture and depth in the Three-River Headwater region of Qinghai Province, China. The performances of the developed PTFs were compared with 14 published PTFs using four indexes, the mean error (ME), standard deviation error (SDE), root mean squared error (RMSE) and coefficient of determination (R²). Results showed that the performances of published PTFs developed using exponential regression were better than those developed using linear regression from OC. Alexander (1980)-B, Alexander (1980)-A and Manrique and Jones (1991)-B PTFs, which had good predictions, could be applied for the soils in the study area. The PTFs developed using MLR (MLR-PTFs) and ANN (ANN-PTFs) had better soil BD predictions than most of published PTFs. The ANN-PTFs had better performances than the MLR-PTFs and their performances could be improved when soil texture and depth were added as predictor variables. The idea of developing PTFs or predicting soil BD in the study area could provide reference for other areas and the results could lay foundation for the estimation of soil water retention and carbon pool.     

Pedotransfer functions for estimating plant available water and bulk density in Swedish agricultural soils

Abstract

Pedotransfer functions (PTFs) to estimate plant available water were developed from a database of arable soils in Sweden. The PTFs were developed to fulfil the minimum requirements of any agro-hydrological application, i.e., soil water content at wilting point (θ _wp ) and field capacity (θ _fc ), from information that frequently is available from soil surveys such as texture and soil organic carbon content (SOC). From the same variables we also estimated bulk density (ρ) and porosity (ε), which seldom are included in surveys, but are needed for calculating element mass balances. The seven particle-size classes given in the data set were aggregated in different ways to match information commonly gained from surveys. Analysis of covariance and stepwise multiple linear regression were used for quantifying the influence of depth, particle size class, textural class and soil organic carbon on the characteristic variables. PTFs developed from other data sets were also tested and their goodness-of-fit and bias was evaluated. These functions and those developed for the Swedish database were also tested on an independent data set and finally ranked according to their goodness of fit. Among single independent variables, clay was the best predictor for θ _wp , sand (or the sum of clay and silt) for θ _fc and SOC for ρ and ε. A large fraction of the variation in θ _wp and θ _fc is explained by soil texture and SOC (up to 90%) and root mean square errors (RMSEs) were as small as 0.03 m³ water m^?3 soil in the best models. For the prediction of ρ and ε in the test data set, the best PTF could only explain 40–43% of the total variance with corresponding RMSEs of 0.14 g cm^?3 and 5.3% by volume, respectively. Recently presented PTFs derived from a North American database performed very well for estimating θ _wp (low error and bias) and could be recommended for Swedish soils if measurements of clay, sand and SOC were available. Although somewhat less accurately, also θ _fc could be estimated satisfactorily. This indicates that the determination of plant available water by texture and SOC is rather independent of soil genesis and that certain PTFs are transferable between continents.     

Identifying soil management zones in a sugarcane field using proximal sensed electromagnetic induction and gamma‐ray spectrometry data

Spatial variation in soils is required to supply ameliorants and fertilisers in the Australian sugarcane industry. However, traditional approaches are cost‐prohibitive. We investigated how a digital soil mapping (DSM) approach could be used to identify management zones. First, ancillary data including electromagnetic induction and gamma‐ray spectrometry data were collected. Using fuzzy k‐means (FKM) clustering, two to six management zones were identified. A similar approach was used to cluster percentage yield variations (2014, 2015 and 2016). Using restricted maximum likelihood analysis of topsoil (0–0.3 m) and subsoil (0.6–0.9 m) physical (e.g. clay) and chemical (e.g. exchangeable sodium percentage [ESP], and exchangeable calcium and magnesium) properties, three zones were found to minimise the mean squared prediction error (). By comparison, the three zones obtained using the percentage yield variation only minimised for subsoil ESP, which suggested it had some influence on sugarcane yield and productivity. Different rates of gypsum were required to manage the moderately sodic topsoil ESP for each zone. This was similarly the case with lime to overcome deficiencies in exchangeable calcium and magnesium. The results were consistent with yield variance, suggesting the smaller yield in some zones was due to topsoil sodicity and strongly sodic subsoil with a greater clay content. We concluded that the DSM approach was successful in identifying soil management zones and can be used to improve soil structural stability and fertility. The zones also had ramifications for strip trials to determine yield increases by comparing variable rate applications of gypsum and lime.