Genetic relationship of body measurement traits at early age with carcass traits in Japanese black cattle

Estimates of genetic parameters were obtained for body measurement traits of 648 animals at 4 months of age, of 545 at 8 months and carcass traits of 14 972 animals with the use of an animal model by the restricted maximum likelihood procedure. The estimated heritabilities for carcass traits were high (0.41 to 0.54). At 4 months the estimated direct heritabilities for body measurement traits were moderate to high (0.28 to 0.64), except for chest width (0.19); at 8 months they were also moderate to high (0.23 to 0.49), except for chest depth and chest width (0.18 and 0.06, respectively). Maternal heritabilities for all body measurement traits were low at both ages. The results indicate that because of their moderate direct genetic correlations with body measurement traits, carcass weight, rib thickness and subcutaneous fat thickness can be improved; however, rib eye area and beef marbling standard show little such possibility considering their correlation with body measurement traits.     

Genetic relationships between temperament of calves at auction and carcass traits in Japanese Black cattle

Correlations of calves’ temperament with carcass traits were estimated to clarify the genetic relationships between them in Japanese Black cattle. The temperament records for 3128 calves during auction at a calf market were scored on a scale of 1 (calm) to 5 (nervous) as temperament score (TS ), and the TS were divided into two groups (TSG ): TS 1 and 2 comprised TSG 1, and 3 to 5 constituted TSG 2. Carcass data were obtained from 33 552 fattened cattle. A threshold animal model was used for analyzing the underlying liability for TSG , whereas a linear one was used for TS and carcass traits. The heritability estimates for TS and TSG were 0.12 and 0.11, respectively. On the other hand, moderate to high heritability estimates were obtained for carcass traits (0.40 to 0.68). The temperament scores were negatively correlated with carcass weight, rib thickness and subcutaneous fat thickness (?0.13 to ?0.59). In contrast, weak to moderate positive correlations were found between the temperament scores and rib eye area or yield estimate (0.16 to 0.45). The temperament scores and beef marbling score had no correlation. These results showed that it is possible to improve temperament and carcass traits simultaneously.     

Genetic parameters for gestation length and the relationship with birth weight and carcass traits in Japanese Black cattle

The objectives of this study were to estimate genetic parameters for gestation length (GL), including estimation of maternal effects, and to investigate the genetic relationships of GL with birth weight and carcass traits in a Japanese Black cattle population. The original data comprised 34 775 records of animals born from October 1999 to August 2003. Two different models were used to analyze the data for GL. The first model (M1) included direct genetic effect of the calf and maternal genetic effect as random effects. The second model (M2) treated GL as a trait of the dam and included direct genetic effects only. M1 was used in bi-variate analysis. The direct and maternal heritabilities for GL estimated from M1 were 0.53 and 0.14, respectively. This result shows that GL is moderately inherited and can be controlled genetically. The direct × maternal genetic correlation for GL was −0.73. Direct genetic correlations of GL with carcass traits were close to zero. However, genetic correlation of maternal GL with carcass weight was moderate (0.25).     

Genomic imprinting variances of beef carcass traits and physiochemical characteristics in Japanese Black cattle

The objective of this study was to estimate variance components related to imprinting for carcass traits and physiochemical characteristics in Japanese Black cattle. The carcass records obtained from 4,220 Japanese Black feedlot cattle included carcass weight (CW), rib eye area (REA), rib thickness, subcutaneous fat thickness, and beef marbling score (BMS), and the physiochemical characteristics were fat, moisture, glycogen per proportion of moisture content, oleic acid, and monounsaturated fatty acids (MUFA). To detect gametic effects, an imprinting model was fitted. High additive heritabilities were estimated for all traits (from 0.516 for glycogen to 0.853 for fat) and were reduced in Mendelian heritability. The range of the differences was from 0.002 (CW) to 0.331 (fat and moisture), and the reductions were due to their imprinting variances. The ratio of the imprinting variance to the total additive genetic variance for REA (0.374), BMS (0.291), fat (0.387), moisture (0.388), and MUFA (0.337) were large (p < 0.05). These imprinting variances were due to the maternal contribution and suggested the existence of maternally expressed genomic imprinting effects on the traits in Japanese Black cattle. Therefore, maternal gametic effects should be considered in breeding programs for Japanese Black cattle.     

Economic efficiency of Japanese Black cattle selection schemes utilizing crossbreeding with the Holstein breed

The economic efficiency of Japanese Black (JB) cattle selection schemes utilizing crossbreeding with the Holstein (H) breed was evaluated in the context of maximizing profitability. Selection schemes were defined that differed in the records available for use as selection criteria. The selection schemes were assessed based on profitability per cow in the JB cattle population. Within each selection scheme, two terminal crossbreeding systems were considered: two‐way crossbreeding without backcrossing (F₁ system) and two‐way crossbreeding with backcrossing (F₁ cross system). The impact on profitability of varying number of sires selected per year and the proportion of H cows that were inseminated by JB semen and of F₁ females that are retained for replacement was examined for all selection schemes. Utilizing crossbreeding with the H breed was less profitable than purebreeding of the JB. Profitability was higher in the F₁ system than in the F₁ cross system in all selection schemes. Profitability was influenced more by changes in the number of sires selected per year than by the proportion H cows that were inseminated by JB semen and of F₁ females that were retained for replacement. Implications of these results for the JB breeding program are discussed.     

Genome‐wide association study for carcass traits,fatty acid composition,chemical composition,sugar, and the effects of related candidate genes in Japanese Black cattle

We performed a genome‐wide association study (GWAS) and candidate gene analysis to: (i) evaluate the effectiveness of the GWAS in our small population by performing GWAS for carcass weight (CW) and fatty acid composition; (ii) detect novel candidate regions affecting non‐CW carcass traits, chemical composition and sugar; and (iii) evaluate the association of the candidate genes previously detected in CW and fatty acid composition with other economically important traits. A total of 574 Japanese Black cattle and 40 657 Single nucleotide polymorphisms were used. In addition, candidate gene analyses were performed to evaluate the association of three CW‐related genes and two fatty acid‐related genes with carcass traits, fatty acid composition, chemical composition and sugar. The significant regions with the candidate genes were detected for CW and fatty acid composition, and these results showed that a significant region would be detectable despite the small sample size. The novel candidate regions were detected on BTA23 for crude protein and on BTA19 for fructose. CW‐related genes associated with the rib‐eye area and fatty acid composition were identified, and fatty acid‐related genes had no relationship with other traits. Moreover, the favorable allele of CW‐related genes had an unfavorable effect on fatty acid composition.     

Variations in genes involved in fat metabolism and their association with ultrasonic and carcass traits in Japanese Black steers

Polymorphisms in genes involved in lipid metabolism have been reported to be associated with fatty acid composition of adipose tissue. However, the relationship of these polymorphisms with premortem ultrasonic traits is unknown. The objective of this study, therefore, was to assess the association between polymorphisms in fatty acid synthase, stearoyl‐coenzyme A desaturase (SCD), sterol regulatory element‐binding protein 1 (SREBP1), diacylglycerol acyltransferase 1, and nuclear receptor subfamily 1, group H, number 3 genes with ultrasonic and carcass traits in Japanese Black steers (n = 300) under progeny testing at the Livestock Improvement Association of Miyazaki. To have a comprehensive analysis of the association between the aforementioned genetic polymorphisms and ultrasonic traits, longitudinal measurements of ultrasonic traits were taken. Furthermore, the association of these genetic polymorphisms and carcass traits was evaluated. The polymorphisms in the SCD gene and SREBP1 were associated (P < 0.05) with some ultrasonic traits at multiple stages. To add to that, the polymorphisms were associated (P < 0.05) with some carcass traits. These findings suggest that the polymorphisms in SCD and SREBP1 are functional mutations or could be related to mutations that can aid in selection to improve some ultrasonic and carcass traits.     

Estimation of variance components for carcass traits in Japanese Black cattle using 50K SNP genotype data

Genomic selection using high‐density single nucleotide polymorphism (SNP) genotype data may accelerate genetic improvements in livestock animals. In this study, we attempted to estimate the variance components of six carcass traits in fattened Japanese Black steers using SNP genotype data. Six hundred and seventy‐three steers were genotyped using an Illumina Bovine SNP50 BeadChip and phenotyped for cold carcass weight, ribeye area, rib thickness, subcutaneous fat thickness, estimated yield percent and marbling score. Additive polygenic variance and the variance attributable to a set of SNPs that had statistically significant effects on the trait were estimated via Gibbs sampling with two models: (i) a model with the chosen SNPs and the additive polygenic effects; and (ii) a model with the polygenic effects alone. The proportion of the estimated variance attributable to the SNPs became higher as the number of SNP effects that fit increased. High correlations between breeding values estimated with the model containing the polygenic effect alone and those estimated by chosen SNPs were obtained. No fraction of the total genetic variance was explained by SNPs associated with the trait at P ≥ 0.1. Our results suggest that for the carcass traits of Japanese Black cattle, a maximum of half of the total additive genetic variance may be explained by SNPs between 100 several tens to several 100s.     

Effects of GH gene polymorphism and sex on carcass traits and fatty acid compositions in Japanese Black cattle

To investigate the effects of bovine growth hormone (bGH) gene polymorphism on carcass traits and fatty acid compositions in Japanese Black cattle caused by nucleotide substitution of CTG (allele A)/GTG (allele B) at codon 127 and of ACG (allele A and B)/ATG (allele C) at codon 172 of bGH, GH genotypes of 135 cattle were determined using allele specific-multiplex polymerase chain reaction (PCR). Allele A gave greater rib thickness and lower melting point of fat (MP) while allele B gave higher C18:1% ( P  < 0.05). Allele C gave higher C18:1, monounsaturated fatty acid (MUFA), unsaturated fatty acid (USFA) percentages ( P  < 0.05). It also gave lower saturated fatty acid (SFA) percentages, higher MUFA/SFA and USFA/SFA ratios, and lower MP ( P  < 0.05). Interactions of sex and GH alleles were analyzed. In heifers, allele A gave higher carcass weight, daily carcass gain, rib eye area, rib thickness, subcutaneous fat thickness, and BMS while allele B gave greater rib eye area and rib thickness ( P  < 0.05). Allele C gave higher C18:1 ( P  < 0.01), MUFA ( P  < 0.01), USFA percentages ( P  < 0.05) and MUFA/SFA and USFA/SFA ratios ( P  < 0.01), and lower C16:0 and SFA percentages ( P  < 0.05) and MP ( P  < 0.01). GH gene polymorphism affected carcass traits and fatty acid compositions although the effects were more pronounced in heifers.     

Estimation of genetic parameters for carcass defects of Japanese Black cattle in Kagoshima

Cattle exhibit a range of carcass defects, including blood splash (BLS), intramuscular edema (INE), muscle steatosis (MUS), bruising (BR), trim loss (TRL) and others (OTH). These defects lower the carcass value and can result in significant economic loss to producers. We estimated the incidence, relationship with inbreeding coefficients and genetic parameters of carcass defects in Japanese Black cattle using 561 619 carcass records from Kagoshima, Japan during April 1988 through March 2011. The defect incidence ranged from 0.22% for TRL to 5.73% for BR. The incidence of MUS and BR increased from 1.21% to 6.57% and from 1.06% to 9.31%, respectively. The incidence of INE peaked at 7.44% in 1999 and decreased thereafter. We observed a positive linear relationship between the defect incidence and the inbreeding coefficients in MUS, BR and TRL (P < 0.01). The heritabilities estimated by univariate animal model with Gibbs sampling for BLS, INE, MUS, BR and TRL were 0.24, 0.06, 0.18, 0.05 and 0.02, respectively. The contribution of farm variance to phenotypic variance was negligible (0.01 to 0.04). Significant genetic correlations of TRL were estimated with MUS (0.63) and BR (0.63). Our results suggest that genetic factors contribute to the incidence of BLS and MUS.     

Identification of leptin gene polymorphisms associated with carcass traits and fatty acid composition in Japanese Black cattle

Previous studies have indicated that some leptin gene polymorphisms were associated with economically important traits in cattle breeds. However, polymorphisms in the leptin gene have not been reported thus far in Japanese Black cattle. Here, we aimed to identify the leptin gene polymorphisms which are associated with carcass traits and fatty acid composition in Japanese Black cattle. We sequenced the full‐length coding sequence of leptin gene for eight Japanese Black cattle. Sequence comparison revealed eight single nucleotide polymorphisms (SNPs). Three of these were predicted to cause amino acid substitutions: Y7F, R25C and A80V. Then, we genotyped these SNPs in two populations (JB1 with 560 animals and JB2 with 450 animals) and investigated the effects on the traits. Y7F in JB1 and A80V in JB2 were excluded from statistical analysis because the minor allele frequencies were low (< 0.1). Association analysis revealed that Y7F had a significant effect on the dressed carcass weight in JB2; R25C had a significant effect on C18:0 and C14:1 in JB1 and JB2, respectively; and A80V had a significant effect on C16:0, C16:1, C18:1, monounsaturated fatty acid and saturated fatty acid in JB1. The results suggested that these SNPs could be used as an effective marker for the improvement of Japanese Black cattle.     

Effects of parent‐of‐origin models with different pedigree information on beef carcass traits and fatty acid composition in Japanese Black cattle

Genomic imprinting should be considered in animal breeding systems to avoid lead in bias in genetic parameter estimation. The objective of this study was to clarify the effects of pedigree information on imprinting variances for carcass traits and fatty acid composition in Japanese Black cattle. Carcass records [carcass weight, rib eye area, rib thickness (RT), subcutaneous fat thickness and beef marbling score (BMS)] and fatty acid composition were obtained for 11,855 Japanese Black feedlot cattle. To estimate and compare the imprinting variances for the traits, two imprinting models with different pedigree information [the sire–dam gametic relationship matrix (Model 1) and the sire–maternal grandsire (MGS) numerator relationship matrix (Model 2)] were fitted. The ratio of the imprinting variance to the total additive genetic variance for RT (6.33%) and BMS (19.00%) was significant in Model 1, but only that for BMS (21.09%) was significant in Model 2. This study revealed that fitting the sire–MGS model could be useful in estimating imprinting variance under certain conditions, such as when restricted pedigree information is available. Furthermore, the present result suggested that the maternal gametic effects on BMS should be included in breeding programmes for Japanese Black cattle to avoid selection bias caused by imprinting effects.     

Estimation of direct and maternal genetic parameters for growth and carcass traits in a herd of Japanese Black cattle in Miyagi prefecture, using a multitrait animal model

Data from 1170 records of fattening calves were collected on growth and carcass traits from a Japanese Black cattle herd located in Miyagi prefecture, Japan. The objective was to determine direct and maternal heritabilities, direct and maternal genetic correlations and phenotypic correlations between bodyweight at the beginning of the fattening period (BWS), bodyweight at the end of the fattening period (BWF), carcass weight (CW), average daily gain during the fattening period (ADG), rib eye area (REA), rib thickness, subcutaneous backfat thickness (SFT), yield estimate (YE) and beef marbling score (BMS). Direct heritability estimates of 0.16 (SFT) and 0.07 (BMS) were low, whereas estimates of the other traits were medium to high and ranged between 0.44 (REA) and 0.78 (CW). Direct genetic correlations were all positive, except those that were between BWS and SFT, and between BWS and YE (?0.49 and ?0.14, respectively). The lowest positive genetic correlation was between BWS and BMS (0.04) and the highest was between BWF and CW (0.99). The phenotypic correlation coefficients ranged between ?0.41 (between SFT and YE) and 0.96 (between BWF and CW). Maternal heritability estimates were generally low and ranged between 0.00 for BMS and 0.08 for BWS, CW and ADG. Selection programs comprising information on growth and carcass traits of calves and maternal traits of dams were suggested.     

Relationship of the bovine growth hormone gene to carcass traits in Japanese black cattle.

The bovine growth hormone gene (bGH) possesses three haplotypes, A, B and C, that differ by amino acid mutations at positions 127 and 172 in the fifth exon: (leucine 127, threonine 172), (valine 127, threonine 172) and (valine 127, methionine 172) respectively. The correlation between meat quality or carcass weight and these haplotypes was investigated in Japanese black cattle. Altogether, 940 bGH haplotypes were compared with respect to six carcass traits: carcass weight, longissimus muscle area, rib thickness, subcutaneous fat thickness, beef marbling score and beef colour. The frequency of the B haplotype was higher (0.421) than that of A (0.269) and C (0.311). High carcass weight and low beef marbling were associated with haplotype A (p < 0.05 and p < 0.01 respectively), whereas beef marbling was increased by haplotype C (p < 0.05). Estimated regression coefficient of the A haplotype substitution effect for carcass weight and beef marbling score were 5.55 (13.1% of the phenotypic SD) and -0.31 (17.0%) respectively. That of the C haplotype for beef marbling score was 0.20 (11.0%). The other traits showed no relationship to the haplotypes examined. The results of this investigation suggest that information pertaining to bGH polymorphisms in Japanese black cattle could be used to improve the selection of meat traits.     

The assessment of genetic diversity within and among the eight subpopulations of Japanese Black cattle using 52 microsatellite markers

Japanese Black cattle are at risk for genetic homogeneity due to intensive use of a few sires. Therefore, assessment of the actual genetic diversity of this breed is important for future breeding plans. In the present study, we investigated the genetic diversity within and among eight subpopulations of Japanese Black cattle using 52 microsatellite markers. The parameters for genetic diversity of Japanese Black cattle were comparable to those of other cattle breeds, suggesting that the relatively high genetic diversity of the breed. However, upon comparison among the eight subpopulations, the Hyogo subpopulation showed markedly low genetic diversity. The results of the pairwise F_ST values, phylogenetic network and structure analysis indicated that the Hyogo population has remarkably high level of genetic differentiation from other populations, while Yamagata, Niigata, Hiroshima and Kagawa populations have low levels of genetic differentiation. Furthermore, multidimensional scaling plots indicated that individuals in some subpopulations were separated from individuals in the other subpopulations. We conclude that while the overall genetic diversity of Japanese Black cattle is still maintained at a relatively high level, that of a particular subpopulation is significantly reduced, and therefore the effective population size of the breed needs to be controlled by correct mating strategies.     

Genetic association between GHSR1a 5′UTR‐microsatellite and nt‐7(C>A) loci and growth and carcass traits in Japanese Black cattle

We carried out a genetic association study between five nucleotide polymorphisms (5′UTR microsatellite ((TG)_n), nt‐7(C>A), L24V, DelR242 and Intron 1 microsatellite) of the GHSR1a gene and growth and carcass traits in 1285 steers sired by 117 Japanese Black bulls in a progeny testing program. We report herein, a significant association between the 5′UTR microsatellite and nt‐7(C>A) loci and growth and carcass traits. We also propose a translational hypothesis that the association is due to differences in the secondary structure of GHSR1b mRNA (the non‐spliced type with the 5′UTR microsatellite) among the GHSR1a gene haplotypes. Furthermore, we predicted the potential increase in profitability due to increased carcass weight in cow‐calf fattening enterprises through planned matings based on DNA testing of the 5′UTR microsatellite. Statistical analysis revealed that the 5′UTR microsatellite locus had a significant additive effect on carcass weight (CW) and average daily gain (ADG), but not on beef marbling score (BMS). One of the four major microsatellite alleles (19‐TG allele) with an allele frequency of 0.145, had a significantly (P < 0.0007) desirable effect on CW and ADG. We concluded that the 19‐TG allele could potentially be economically useful nucleotide markers for growth and carcass traits in Japanese Black cattle.     

Effects of feeding different levels of concentrate on growth and carcass characteristics in younger Japanese Black cattle

The effects of a higher concentrate feed during the raising period on the growth and carcass of Japanese Black cattle being fattened at a younger age were investigated using three pairs of artificially bred identical twins and three pairs of full‐sibs. The animals were fed the concentrate at 2.4%/day (2.4% group) and 1.2%/day (1.2% group) comparative bodyweight (BW) during the raising period. The BW and subcutaneous fat thickness were measured every month using ultrasonic equipment. The animals were slaughtered at the age of 24 months. The BW of the 2.4% group from the age of 6–10 months appeared to be higher than that of the 1.2% group (P < 0.1). The subcutaneous fat of the 2.4% group from the age of 7–11 months was thicker than that of the 1.2% group (P < 0.1). After those ages, the BW and subcutaneous fat of the two groups did not differ and there was no difference in the carcass characteristics between the two groups. Using a higher concentrate feed during the raising period for younger fattening of Japanese Black cattle influenced growth from the late half of the raising period to the early part of the fattening period.     

Identification of divergently selected regions between Japanese Black and Holstein cattle using bovine 50k SNP array

Differences between average allelic frequencies of genes that relate to traits suggest that it would be evidence of artificial selections. Sliding window approach is a useful method to identify genomic regions that have been differently selected between two breeds. The objective of this study was to identify the divergently selected regions between Japanese Black (JB) and Japanese Holstein (JH) cattle based on genotypic information obtained through a high‐density single nucleotide polymorphism (SNP) panel. After genotyping of 54 001 SNP markers on 100 animals (50 JB and 50 JH), 40 635 SNPs were suitable for the analysis. For each of these SNPs, the absolute difference between allelic frequencies of JB and JH was calculated. In the current study, 10 consecutive SNPs were defined as components of a window. For each window, the average difference in allelic frequency was calculated. This was termed sliding window average difference (SWAD). Among 40 055 windows, we focused on 39 windows with the largest SWAD. This was equivalent to 0.1% of all windows and the SWAD was more than 0.435. Some of these windows overlapped and were distributed in 11 regions. These regions were in good agreement with reported quantitative trait locus, therefore would be selection signatures and good candidates that harbor the causative mutations.     

A genome‐wide association study for fat‐related traits computed by image analysis in Japanese Black cattle

The objective of this study was to identify genomic regions associated with fat‐related traits using a Japanese Black cattle population in Hyogo. From 1836 animals, those with high or low values were selected on the basis of corrected phenotype and then pooled into high and low groups (n = 100 each), respectively. DNA pool‐based genome‐wide association study (GWAS) was performed using Illumina BovineSNP50 BeadChip v2 with three replicate assays for each pooled sample. GWAS detected that two single nucleotide polymorphisms (SNPs) on BTA7 (ARS‐BFGL‐NGS‐35463 and Hapmap23838‐BTA‐163815) and one SNP on BTA12 (ARS‐BFGL‐NGS‐2915) significantly affected fat percentage (FAR). The significance of ARS‐BFGL‐NGS‐35463 on BTA7 was confirmed by individual genotyping in all pooled samples. Moreover, association analysis between SNP and FAR in 803 Japanese Black cattle revealed a significant effect of SNP on FAR. Thus, further investigation of these regions is required to identify FAR‐associated genes and mutations, which can lead to the development of DNA markers for marker‐assisted selection for the genetic improvement of beef quality.     

Genetic parameters for dry matter, energy and protein intake, and their relationships with performance and carcass traits in Japanese Black cattle

Genetic parameters for feed intake and performance traits of 514 bulls and carcass traits of 22 099 of their progeny, and the relationships of measures of feed intake with performance and carcass traits were estimated. Feed intake traits were dry matter intake (DMI), concentrate intake (CONI), roughage intake, ratio of roughage intake to DMI, metabolizable energy intake (MEI) and digestible crude protein intake (DCPI). Performance traits included daily gain, metabolic weight, live weight at the end of test, dry matter conversion ratio and residual feed intake. Progeny carcass traits were carcass weight, percentage of meat yield, rib eye area (REA), subcutaneous fat, marbling score, meat colour (MCS), fat colour (FCS) and meat quality grade. All the feed intake and performance traits were moderately heritable. The heritabilities for REA and MCS were moderate, and that for FCS was low, while those for the other carcass traits were high. Selection against DMI, CONI and DCPI would reduce excessive intake of feed, but would have undesirable effects on growth and most of the carcass traits. Selection against MEI would lead to improvements in feed efficiency and growth traits. Selection against DCPI would also improve feed efficiency; however, responses in growth traits would decrease. Results indicate that selection against MEI might be better than any other measures of feed intake to improve feed efficiency with simultaneous improvement in growth and most of the carcass traits.