Hydrophobic probe binding of beta-lactoglobulin in the native and molten globule state induced by high pressure as affected by pH,KIO(3) and N-ethylmaleimide

High hydrostatic pressure (HHP) at 500 MPa and 50 degrees C induces beta-LG into the molten globule state. Retinol, cis-parinaric acid (CPA), and 1-anilino-naphthalene-8-sulfonate (ANS) fluorescence from pH 2.5 to 10.5 in the presence of the native and molten globule states of beta-LG indicate that retinol binds to beta-LG in the calyx, CPA at the surface hydrophobic site, and ANS in multiple hydrophobic sites. HHP treatment results in a decrease of beta-LG affinity for retinol and CPA, suggesting conformational changes in the calyx and surface hydrophobic site of beta-LG during HHP treatment. beta-LG treated by HHP in the presence of N-ethylmaleimide (NEM) retains retinol affinity, suggesting that NEM protects the calyx conformation of beta-LG during HHP treatment. HHP treatment of beta-LG in the presence of KIO(3) exhibits a great decrease of CPA affinity compared to HHP-treated beta-LG in the absence of KIO(3), suggesting the formation of non-native disulfide bonding at the CPA binding site.     

Effects of high-pressure processing at low temperature on the molecular structure and surface properties of beta-lactoglobulin

High-pressure processing (HPP) was utilized to induce unfolding of beta-lactoglobulin (beta-LG). beta-Lactoglobulin solutions at concentrations of 0.5 mg/mL, in pH 7.5 phosphate buffer, were pressure treated at 510 MPa for 10 min at either 8 or 24 degrees C. The secondary structure, as determined by circular dichroism (CD), of beta-LG processed at 8 degrees C appeared to be unchanged, whereas beta-LG processed at 24 degrees C lost alpha-helix structure. Tertiary structures for beta-LG, as determined by near-UV CD, intrinsic protein fluorescence spectroscopy, hydrophobic fluorescent probe binding, and thiol group reactivity, were changed following processing at either temperature. The largest changes to tertiary structure were observed for the samples processed at 24 degrees C. Model solutions containing the pressure-treated beta-LG showed significant decreases in surface tension at liquid-air interfaces with values of 54.00 and 51.69 mN/m for the samples treated at 24 and 8 degrees C, respectively. In comparison, the surface tension for model solutions containing the untreated control was 60.60 mN/m. Changes in protein structure during frozen and freeze-dried storage were also monitored, and some renaturation was observed for both storage conditions. Significantly, the sample pressure-treated at 8 degrees C continued to display the lowest surface tension.     

Influence of binding of sodium dodecyl sulfate, all-trans-retinol, palmitate, and 8-anilino-1-naphthalenesulfonate on the heat-induced unfolding and aggregation of beta-lactoglobulin B

Heat treatment of bovine beta-lactoglobulin B (beta-LG) causes it to partially unfold and aggregate via hydrophobic association and intra- and interprotein disulfide bonds. The first stage, which involves a "loosening" of the native structure, is influenced by the environmental conditions, such as pressure, pH, and added solutes. In the present study, four potential beta-LG ligands [palmitate, sodium dodecyl sulfate (SDS), 8-anilino-1-naphthalenesulfonate (ANS), and all-trans-retinol (retinol)] were added to beta-LG solutions prior to heat treatment for 12 min at temperatures between 40 and 93 degrees C. The extent of the changes in secondary and tertiary structures, unfolding, and aggregation at 20 degrees C were determined by circular dichroism, fluorescence, and alkaline- and SDS-polyacrylamide gel electrophoresis (PAGE). Both palmitate and SDS stabilized the native structure of beta-LG against heat-induced structural flexibility, subsequent unfolding, and denaturation. Retinol was less effective, probably because of its lower affinity for the calyx-binding site, and ANS did not stabilize beta-LG, suggesting that ANS did not bind strongly in the calyx. It was also noted that holding a beta-LG solution with added SDS or ANS promoted the formation of a hydrophobically associated non-native dimer.     

Influence of binding of sodium dodecyl sulfate, all-trans-retinol, and 8-anilino-1-naphthalenesulfonate on the high-pressure-induced unfolding and aggregation of beta-lactoglobulin B

Bovine beta-lactoglobulin B (beta-LG) is susceptible to pressure treatment, which unfolds it, allowing thiol-catalyzed disulfide bond interchange to occur, facilitating intermolecular bonding (both noncovalent and disulfide). In the present study, beta-LG was mixed with sodium dodecyl sulfate (SDS), all-trans-retinol (retinol), or 8-anilino-1-naphthalenesulfonate (ANS) on a 1:1.1 molar basis, and aliquots were held at pressures between 50 and 800 MPa for 30 min at pH 7.2 and 20 degrees C. Polyacrylamide gel electrophoresis (PAGE) showed that beta-LG alone (control) was converted into a non-native monomer and a series of dimers, trimers, etc., at pressures beyond 100 MPa; SDS inhibited the formation of non-native species up to 200 MPa, and neither retinol nor ANS inhibited the formation of the non-native species as effectively as SDS. At pressures beyond 350 MPa, SDS ceased to have any inhibitory effect, but both ANS and retinol showed significant inhibition. The near- and far-UV CD patterns and the ANS fluorescent data were consistent with the PAGE data, but the retinol fluorescent data did not show sufficient change to interpret. The results suggested that there were three discernible structural stages. In Stage I (0.1-150 MPa), the native structure is stable; in Stage II (200-450 MPa), the native monomer is reversibly interchanging with non-native monomers and disulfide-bonded dimers; and in Stage III (>500 MPa), the free CysH in non-native monomer and dimer interacts with -S-S- bonds to produce high molecular weight aggregates of beta-LG. SDS inhibited the Stage I to Stage II transition at 200 MPa, and ANS and retinol inhibited the Stage II to Stage III transition at 600 MPa.     

Phospholipid/fatty acid-induced secondary structural change in beta-lactoglobulin during heat-induced gelation

Effects of phosphatidylcholine (PC) and the predominant fatty acids (FAs) in milk, butyrate, oleate, and palmitate, on secondary structural changes in beta-lactoglobulin (beta-LG) during heat-induced gelation were analyzed on the basis of circular dichroism (CD) spectra. Small-strain oscillatory measurements were carried out to characterize viscoelastic properties of the heat-induced gels. In the absence of added salt, PC and FAs induced helix formation of beta-LG on heating to 80 degrees C and increased the storage moduli (G') of heat-induced gels. In the presence of 500 mM NaCl, PC did not change the CD spectrum of beta-LG but decreased G'. In contrast, butyrate substantially unfolded beta-LG in 500 mM NaCl on heating, forming very elastic gels with increased G' values. Palmitate and oleate induced beta-LG gel formation at 25 degrees C without heating; heating to 80 degrees C almost completely unfolded beta-LG in 500 mM NaCl.     

Reduced immunogenicity of beta-lactoglobulin by conjugation with carboxymethyl dextran differing in molecular weight

To reduce the immunogenicity of beta-lactoglobulin (beta-LG), two beta-LG-carboxymethyl dextran (CMD) conjugates (Conj. 40 and Conj. 162) were prepared by using water-soluble carbodiimide (EDC). The molar ratios of beta-LG to CMD in Conj. 40 and Conj. 162 were 8:1 and 7:1, respectively. Each conjugate maintained approximately 50% of the retinol binding activity of beta-LG. Structural analyses by intrinsic fluorescence, CD spectra, and ELISA with monoclonal antibodies indicated that the surface of beta-LG in each conjugate was covered by CMD without great disruption of native conformation. By conjugation with CMD, the antibody response to beta-LG was reduced in BALB/c, C3H/He, and C57BL/6 mice, which was eminent in Conj. 162. The results of B cell epitope scanning using overlapping synthesized peptides showed that the linear epitope profiles of the conjugates were similar to those of beta-LG, whereas the antibody response to each epitope was reduced, which was eminent in Conj. 162. It was concluded that conjugation with CMD of higher molecular weight is effective in reducing the immunogenicity of beta-LG and that masking of epitopes by CMD is responsible for the reduced immunogenicity.     

Ethanol effect on the structure of beta-lactoglobulin b and its ligand binding

The changes of structure and ligand binding properties of beta-LG B have been studied by fluorescence and circular dichroism spectroscopy in ethanolic solutions. Fluorescence measurements of retinol/beta-LG interactions at 480 nm in various ethanol concentrations show that the maximal fluorescence intensity induced by this interaction between retinol and beta-LG is observed around 20% v/v of ethanol. It is reduced to zero at 40% and 50% of ethanol. These results suggest that there are two distinct structural changes in beta-LG occurring between 20% and 30% and around 40% of ethanol. The first transition, which increases affinity and the apparent number of binding sites for retinol, may be related or similar to the Tanford transition. The strong quenching of retinol emission at 480 nm in 40% of ethanol indicates the radical transformation of beta-LG tertiary structure and the release of retinol. CD spectra at the aromatic region show that secondary and tertiary structures of beta-LG are not significantly affected between 0% and 20% of ethanol. In 30% of ethanol, beta-sheet percentage of beta-LG decreases with respect to native beta-LG (from 55% to 46%). beta-Sheet percentage in beta-LG increases in 40% and 50% alcohol (51% and 53%) relative to 30% of ethanol, which also indicates the strong rearrangement of the secondary structure of beta-LG, while its tertiary structure and beta-LG interactions are radically changed.     

Gelling properties of heat-denatured beta-lactoglobulin aggregates in a high-salt buffer

Thermal denaturation, rheological, and microstructural properties of gels prepared from native beta-lactoglobulin (beta-LG) and preheated or heat-denatured beta-LG (HDLG) aggregates were compared. The HDLG was prepared by heating solutions of 4% beta-LG in deionized water, pH 7.0, at 80 degrees C for 30 min and then diluted to the desired concentration in 0.6 M NaCl and 0.05 M phosphate buffer at pH 6.0, 6.5, and 7.0. When reheated to 71 degrees C, HDLG formed a gel at a concentration of 2% protein. At pH 7.0, 3% HDLG gelled at 52.5 degrees C and had a storage modulus (G') of 2200 Pa after cooling. beta-LG (3%) in 0.6 M NaCl and 0.05 M phosphate buffer, pH 7.0, did not gel when heated to 71 degrees C. The gel point of 3% HDLG decreased by 10.5 degrees C and the G' did not change when the pH was decreased to 6.0. The HDLG gel microstructure was composed of strands and clumps of small globular aggregates in contrast to beta-LG gels, which contained a particulate network of compacted globules. The HDLG formed a gel at a lower concentration and lower temperature than beta-LG in the high-salt buffer, suggesting an application in meat systems or other food products prepared with salt and processed at temperatures of < or =71 degrees C.     

Effect of heat treatment on bovine beta-lactoglobulin A, B, and C explored using thiol availability and fluorescence.

Dilute solutions of beta-lactoglobulin (beta-Lg) A, B, and C were heated at temperatures between about 40 and 94 degrees C for 10 min, cooled, and analyzed using Trp fluorescence and extrinsic fluorescence spectra of the probe 1,8-anilinonaphthalene sulfonate (ANS). Thiol availabilities using 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) were determined using a separate set of samples. The normalized ANS fluorescence emission intensity and the thiol availability results showed a 1:1 relationship with the loss of nativelike but not SDS-monomeric protein, as determined by PAGE analysis. The normalized Trp emission intensity results did not show a comparable 1:1 relationship with the loss of nativelike protein, indicating that the Trp intensity arose from consequential disulfide bond reorganization and not the initial unfolding reaction. The results were also analyzed in terms of two-state models, and the midpoint temperatures (T(mid)) for the proteins were generally beta-Lg C > beta-Lg A > beta-Lg B, and the slopes at the midpoint temperatures for the A variant were generally less than those for the B and C variants indicating that beta-Lg A may denature by a different mechanism from that of beta-Lg B or beta-Lg C. The T(mid) parameters derived from the ANS fluorescence intensity results were similar to those for thiol availability and both were lower than the T(mid) values for Trp emission intensity showing that creation of an ANS binding site on a beta-Lg molecule was linked to the irreversible exposure of a thiol group and the loss of native beta-Lg but preceded the decrease in Trp(61) fluorescence quenching. These results for the differences between the behavior of the A and B or the C variants involved the creation of a destabilizing cavity by the Val(118)Ala (A --> B) substitution and the changed charge distribution within the CD loop caused by the Asp(64)Gly (A --> B) substitution.     

Functional changes in beta-lactoglobulin upon conjugation with carboxymethyl cyclodextrin

Bovine beta-lactoglobulin-carboxymethyl cyclodextrin (beta-LG-CMCyD) conjugate was prepared using water-soluble carbodiimide, in an effort to improve the functional properties of the protein. The molar ratio of beta-LG to CMCyD in the conjugate was 1:2. The isoelectric point of the conjugate was 4.1-5.8. Spectroscopic studies indicated that the global conformation of the conjugate was similar to that of native beta-LG. Structural analyses with monoclonal antibodies indicated that there was a conformational change around (15)Val-(29)Ile (beta-sheet). The denaturation temperature of the conjugate was about 77 degrees C, which is about 4 degrees C higher than that of native beta-LG. The beta-LG-CMCyD conjugate maintained retinol-binding activity as strong as that of beta-LG. The emulsifying activity of beta-LG was much improved and the antioxidative activity of beta-LG was maintained after conjugation with CMCyD.     

Reduced immunogenicity of beta-lactoglobulin by conjugation with acidic oligosaccharides

Bovine beta-lactoglobulin (beta-LG) was conjugated with the acidic oligosaccharides, alginic acid oligosaccharide (ALGO) and phosphoryl oligosaccharides (POs) by the Maillard reaction to reduce the immunogenicity of beta-LG. The molar ratios of beta-LG to ALGO and POs in the conjugates were 1:6 and 1:8. The carbohydrate-binding sites in the beta-LG-ALGO conjugate were partially identified to be (60)Lys, (77)Lys, (100)Lys, (138)Lys, and (141)Lys. The isoelectric point of each conjugate was lower than that of beta-LG. CD spectra indicated that the secondary structure of beta-LG was almost maintained after conjugation. The results of fluorescence studies indicated that the conformation around Trp had not changed in each conjugate and that the surface of each conjugate was covered with a saccharide chain. Structural analyses with monoclonal antibodies indicated that the conformation around (8)Lys-(19)Trp (beta-sheet, random coil, short helix) in the conjugates had changed, whereas the native structure was maintained around (15)Val-(29)Ile (beta-sheet) and (125)Thr-(135)Lys (alpha-helix). The beta-LG-ALGO and beta-LG-POs conjugates maintained 77 and 70% of the retinol binding activity of beta-LG. Conjugation with ALGO and POs substantially enhanced the thermal stability of beta-LG. The anti-beta-LG antibody response was markedly reduced after immunization with both conjugates in BALB/c, C57BL/6, and C3H/He mice. B cell epitopes of beta-LG and the conjugate recognized in these mice were determined with 15-mer multipin peptides, and the linear epitope profiles of the conjugates were found to be similar to those of beta-LG, whereas the antibody response to each epitope was dramatically reduced. In particular, effective reduction of the antibody response was observed in the vicinity of the carbohydrate-binding sites. Conjugation of beta-LG with these acidic oligosaccharides was effective in reducing the immunogenicity of beta-LG. The conjugates obtained in this study are edible, so they would be very useful for food application.     

Characterization and in vitro digestibility of bovine beta-lactoglobulin glycated with galactooligosaccharides

Galactooligosaccharides (GOS) are well-known prebiotic ingredients which can form the basis of new functional dairy products. In this work, the production and characterization of glycated beta-lactoglobulin (beta-LG) with prebiotic GOS through the Maillard reaction under controlled conditions ( a(w) = 0.44, 40 degrees C for 23 days) have been studied. The extent of glycation of beta-LG was evaluated by formation of furosine which progressively increased with storage for up to 16 days, suggesting that the formation of Amadori compounds prevailed over their degradation. RP-HPLC-UV, SDS-PAGE, and IEF profiles of beta-LG were modified as a consequence of its glycation. MALDI-ToF mass spectra of glycated beta-LG showed an increase of up to approximately 21% in its average molecular mass after storage for 23 days. Moreover, a decrease in unconjugated GOS (one tri-, two tetra-, and one pentasaccharide) was observed by HPAEC-PAD upon glycation. These results were confirmed by ESI MS. The stability of the glycated beta-LG to in vitro simulated gastrointestinal digestion was also described and compared with that of the unglycated protein. The yield of digestion products of glycated beta-LG was lower than that observed for the unglycated protein. The conjugation of prebiotic carbohydrates to stable proteins and peptides could open new routes of research in the study of functional ingredients.     

Gelation of chicken pectoralis major myosin and heat-denatured beta-lactoglobulin

Thermal, rheological, and microstructural properties of myosin (1 and 2% protein) were compared to mixtures of 1% myosin and 1% heat-denatured beta-lactoglobulin aggregates (myosin/HDLG) and 1% myosin and 1% native beta-lactoglobulin (myosin/beta-LG) in 0.6 M NaCl and 0.05 M sodium phosphate buffer, pH 6.0, 6.5, and 7.0 during heating to 71 degrees C. Thermal denaturation patterns of myosin and myosin/HDLG were similar except for the appearance of an endothermic peak at 54-56 degrees C in the mixed system. At pH 7.0, 2% myosin began to gel at 48 degrees C and had a storage modulus (G') of 500 Pa upon cooling. Myosin/HDLG (2% total protein) had a gel point of 48 degrees C and a G' of 650 Pa, whereas myosin/beta-LG had a gel point of 49 degrees C but the G' was lower (180 Pa). As the pH was decreased, the gel points of myosin and myosin/HDLG decreased and the G' after cooling increased. The HDLG was incorporated within the myosin gel network, whereas beta-LG remained soluble.     

Effect of milk concentration on the irreversible thermal denaturation and disulfide aggregation of beta-lactoglobulin

The kinetics of beta-lactoglobulin (beta-LG) denaturation in reconstituted skim milk samples of various concentrations (9.6-38.4% total solids) over a wide temperature range (75-100 degrees C) was studied. The thermal denaturation of beta-LG had a reaction order of 1.5 at all milk solids concentrations and at all temperatures. The rate of denaturation of beta-LG was markedly dependent on the milk solids concentration and the heating temperature. At 75 degrees C, the thermal denaturation of beta-LG was retarded at higher milk solids concentrations. However, this retardation was less pronounced at higher temperatures so that a similar rate of denaturation was observed at all milk solids concentrations at 100 degrees C. From an examination of the level of disulfide-aggregated beta-LG, it was evident that most, but not all, of the denatured beta-LG was involved in disulfide-aggregated complexes, either with other denatured whey proteins or with the casein micelles. As with beta-LG denaturation, the rate of disulfide aggregation of beta-LG was markedly dependent on the milk solids concentration.     

高静压处理改善白果蛋白致敏性和功能特性

为了研究高静压处理对白果蛋白结构、抗原性及功能特性的影响,分别采用100,200,300,400,500,600和700 MPa的压力对白果蛋白进行处理,采用酶联免疫吸附检测法测定蛋白的致敏性,分别采用聚丙烯酰胺凝胶电泳,圆二色谱,荧光光谱和紫外吸收光谱检测白果蛋白分子量和构象的改变,功能特性的检测包括热稳定性和乳化特性。结果表明,高静压处理在300~700 MPa范围内可显著降低白果蛋白的致敏性(P0.05),同时高压处理后,白果蛋白能被分解为分子量为4~30 k Da范围内的小分子蛋白,此外,其二级结构中的α-螺旋和β-折叠结构被大量破坏形成无规则卷曲结构,其紫外吸收强度,表面疏水性和游离巯基含量明显提高(P0.05),高压对白果蛋白的致敏性影响与其结构变化密切相关,另外高压处理(300~700 MPa)可明显改善白果蛋白的热稳定性和乳化性能(P0.05)。因此,高静压技术可以作为一种降低白果蛋白致敏性和改善其功能特性的有效手段。     

Effect of ultrahigh hydrostatic pressure on the activity and structure of mushroom (Agaricus bisporus) polyphenoloxidase

High hydrostatic pressure (HHP, treatment pressure ≤700 MPa) is approved to be the most successful commercial nonthermal processing due to its minimal modifications in nutritional and sensory quality. However, for some pressure stable enzymes such as PPO, this unique technology can hardly inactivate them at treatment pressure below of 700 MPa. This study investigated the effects of ultrahigh hydrostatic pressure (UHHP, treatment pressure >700 MPa) on the activity of Agaricus bisporus mushroom polyphenoloxidase (PPO) both in the phosphate buffer and in the mushroom puree, and on the structure of the enzyme by means of circular dichroism (CD), fluorescence emission spectra, and sulphydryl group detection. The results showed that UHHP treatment at pressure from 800 to 1600 MPa caused significant inactivation on the PPO both in the phosphate buffer and in the mushroom puree. UHHP treatment at 1400 and 1600 MPa for 1 min reduced the enzyme activity by 90.4% and 99.2% in the buffer;, however, higher enzyme activity remained in the puree after UHHP treatment at the same condition. CD and fluorescence spectra analysis showed that the secondary and tertiary structures of UHHP treated mushroom PPO were changed. The sulphydryl group (SH) detection revealed that the SH content on the surface of UHHP treated mushroom PPO was increased. It has been suggested that the inactivation of mushroom PPO by UHHP treatment at pressure higher than 1000 MPa was due to the synergistic effect of the pressure and the heat arising from pressurization, in which heat plays a major role.     

Heat-induced redistribution of disulfide bonds in milk proteins. 2. Disulfide bonding patterns between bovine beta-lactoglobulin and kappa-casein

Heat treatment of milk causes the heat-denaturable whey proteins to aggregate with kappa-casein (kappa-CN) via thiol-disulfide bond interchange reactions. The particular disulfide bonds that are important in the aggregates are uncertain, although Cys(121) of beta-lactoglobulin (beta-LG) has been implicated. The reaction at 60 degrees C between beta-LG A and an activated kappa-CN formed small disulfide-bonded aggregates. The tryptic peptides from this model system included a peptide with a disulfide bond between a Cys residue in the triple-Cys peptide [beta-LG(102-124)] and kappa-CN Cys(88) and others between kappa-CN Cys(88) or kappa-CN Cys(11) and beta-LG Cys(160). Only the latter two novel disulfide bonds were identified in heated (90 degrees C/20 min) milk. Application of computational search tools, notably MS2Assign and SearchXLinks, to the mass spectrometry (MS) and collision-induced dissociation (CID)-MS data was very valuable for identifying possible disulfide-bonded peptides. In two instances, peptides with measured masses of 4275.07 and 2312.07 were tentatively assigned to beta-LG(102-135):kappa-CN(11-13) and beta-LG A(61-69):kappa-CN(87-97), respectively. However, sequencing using the CID-MS data demonstrated that they were, in fact, beta-LG(1-40) and beta-LG(41-60), respectively. This study supports the notion that reversible intramolecular disulfide-bond interchange precedes the intermolecular interchange reactions.     

Modification of bovine beta-lactoglobulin by glycation in a powdered state or in an aqueous solution: immunochemical characterization.

Bovine beta-LG was modified by glycation with lactose in a powdered state or in an aqueous solution. An immunological characterization was performed using monoclonal antibodies with defined epitopes. The results showed that the structural changes were confined to the AB loop region of the molecules when glycation was conducted in a restricted water environment and had little consequences on the association state of glycated beta-LG. The protein conformation was much more extensively modified when glycation was performed in an aqueous solution at 60 degrees C, despite a lower glycation extent. These structural changes were located at the dimer interface (AB loop, GH loop, beta-strand I, and alpha-helix). These results allowed us to establish a relationship between the conformational changes and the modification of the association state of the glycated protein (formation of disulfide bridges between the free thiol groups of two monomers), previously described.     

Heat treatment of beta-lactoglobulin: structural changes studied by partitioning and fluorescence

Functional properties of whey protein concentrates (WPC) are primarily dependent on the degree of denaturation of beta-lactoglobulin (beta-LG), the major globular whey protein. Irreversible modifications in the tertiary structure and association state of beta-LG after heat treatment were studied by partition in aqueous two-phase systems and fluorescence quenching. Partitioning of preheated beta-LG in two-phase systems containing 5% (w/w) poly(ethylene glycol) and 7% (w/w) dextran, between pH 6.0 and7.0, are appropriately related with the intensity of heat treatment. An increase in the partition coefficient of beta-LG was observed with increasing temperature of heat treatment. On the other hand, fluorescence quenching of beta-LG by acrylamide was used to study the conformational flexibility of the protein at pH values between 4. 0 and 9.0. The values of bimolecular quenching rate constant (k(q)) obtained showed that beta-LG appears to be more flexible at high pH values, while at low pH the protein assumes a more compact form. The efficiency of acrylamide quenching on preheated beta-LG was substantially more pronounced than for the untreated protein. This difference can be ascribed to the presence of unfolded monomers and aggregates of denatured molecules formed after heat treatment, whose tryptophanyl residues are more exposed to the solvent. In conclusion, the results suggest that partition studies in aqueous two-phase systems and fluorescence quenching are very useful tools to detect changes in conformation and aggregation of beta-LG induced by heat treatment.     

Effect of physicochemical conditions on peptide-peptide interactions in a tryptic hydrolysate of beta-lactoglobulin and identification of aggregating peptides

The objective of this study was to characterize the changes in peptide solubility resulting from changing some physicochemical conditions in a tryptic hydrolysate of beta-lactoglobulin (beta-LG). The turbidity (500 nm) of a 1% solution of tryptic peptides was measured at pH 3-10, at 5, 25, and 50 degrees C, in the presence of different salt concentrations (0, 0.5, and 1 M NaCl), in the presence of denaturing and reducing agents (6 M urea, 5% SDS, or 5% beta-mercaptoethanol), and under an electric field (isoelectric focusing). The results reveal an increase in turbidity of the peptide solution at pH 4, but a slight increase in turbidity was also observed at pH 8, which is attributable to peptides linked by disulfide bridges. The effect of temperature and ionic strength on the turbidity occurring at pH 4 indicates that mainly hydrophobic interactions are involved in the aggregation process. The material in the precipitate at pH 4 was identified as the peptides beta-LG 1-8, 15-20, and 41-60 and non-hydrolyzed alpha-lactalbumin. These results suggest that a limited number of peptides are involved in the aggregation process observed at pH 4, some of which having bioactive (beta-LG 15-20, ACE inhibitor, and opioid) or emulsifying properties (beta-LG 41-60). Aggregation of these peptides at acidic pH indicates that a simple acidification step could represent an easy process for isolating peptidic fractions enriched in bioactive or functional peptides.