Influence of binding of sodium dodecyl sulfate, all-trans-retinol, palmitate, and 8-anilino-1-naphthalenesulfonate on the heat-induced unfolding and aggregation of beta-lactoglobulin B

Heat treatment of bovine beta-lactoglobulin B (beta-LG) causes it to partially unfold and aggregate via hydrophobic association and intra- and interprotein disulfide bonds. The first stage, which involves a "loosening" of the native structure, is influenced by the environmental conditions, such as pressure, pH, and added solutes. In the present study, four potential beta-LG ligands [palmitate, sodium dodecyl sulfate (SDS), 8-anilino-1-naphthalenesulfonate (ANS), and all-trans-retinol (retinol)] were added to beta-LG solutions prior to heat treatment for 12 min at temperatures between 40 and 93 degrees C. The extent of the changes in secondary and tertiary structures, unfolding, and aggregation at 20 degrees C were determined by circular dichroism, fluorescence, and alkaline- and SDS-polyacrylamide gel electrophoresis (PAGE). Both palmitate and SDS stabilized the native structure of beta-LG against heat-induced structural flexibility, subsequent unfolding, and denaturation. Retinol was less effective, probably because of its lower affinity for the calyx-binding site, and ANS did not stabilize beta-LG, suggesting that ANS did not bind strongly in the calyx. It was also noted that holding a beta-LG solution with added SDS or ANS promoted the formation of a hydrophobically associated non-native dimer.     

Beta-lactoglobulin structure and retinol binding changes in presence of anionic and neutral detergents

Bovine beta-lactoglobulin (beta-LG) in vivo (in milks) has been found in complexes with lipids such as butyric and oleic acids. To elucidate the still unknown structure-function relationship in this protein, the structural changes of beta-lactoglobulin variant A (beta-LG A) in the presence of anionic surfactant such as sodium n-dodecyl sulfate (SDS) and in the presence of nonionic surfactant such as Triton X-100 have been investigated. Subsequently, the retinol binding by beta-LG has been investigated in the presence of various amounts of these surfactants as its binding indicator. The results of UV-vis and fluorescence studies show a higher denaturating effect of SDS at acid pH that can be due to greater positive charges of beta-LG at this pH indicating also the nonspecific hydrophobic interactions of Triton X-100 with beta-LG at all studied pHs. Isothermal titration calorimetry (ITC) measurements indicate the endothermic nature of beta-LG/SDS interactions and the exothermic nature of Triton X-100/beta-LG interactions. The analysis of the binding data demonstrates the absence of considerable changes in retinol binding properties of beta-LG in the presence of various amounts of these surfactants. This implies that surfactant binding does not change the conformation of beta-LG in the regions defining the retinol-binding site.     

Influence of binding of sodium dodecyl sulfate, all-trans-retinol, and 8-anilino-1-naphthalenesulfonate on the high-pressure-induced unfolding and aggregation of beta-lactoglobulin B

Bovine beta-lactoglobulin B (beta-LG) is susceptible to pressure treatment, which unfolds it, allowing thiol-catalyzed disulfide bond interchange to occur, facilitating intermolecular bonding (both noncovalent and disulfide). In the present study, beta-LG was mixed with sodium dodecyl sulfate (SDS), all-trans-retinol (retinol), or 8-anilino-1-naphthalenesulfonate (ANS) on a 1:1.1 molar basis, and aliquots were held at pressures between 50 and 800 MPa for 30 min at pH 7.2 and 20 degrees C. Polyacrylamide gel electrophoresis (PAGE) showed that beta-LG alone (control) was converted into a non-native monomer and a series of dimers, trimers, etc., at pressures beyond 100 MPa; SDS inhibited the formation of non-native species up to 200 MPa, and neither retinol nor ANS inhibited the formation of the non-native species as effectively as SDS. At pressures beyond 350 MPa, SDS ceased to have any inhibitory effect, but both ANS and retinol showed significant inhibition. The near- and far-UV CD patterns and the ANS fluorescent data were consistent with the PAGE data, but the retinol fluorescent data did not show sufficient change to interpret. The results suggested that there were three discernible structural stages. In Stage I (0.1-150 MPa), the native structure is stable; in Stage II (200-450 MPa), the native monomer is reversibly interchanging with non-native monomers and disulfide-bonded dimers; and in Stage III (>500 MPa), the free CysH in non-native monomer and dimer interacts with -S-S- bonds to produce high molecular weight aggregates of beta-LG. SDS inhibited the Stage I to Stage II transition at 200 MPa, and ANS and retinol inhibited the Stage II to Stage III transition at 600 MPa.     

Reduced immunogenicity of beta-lactoglobulin by conjugation with acidic oligosaccharides

Bovine beta-lactoglobulin (beta-LG) was conjugated with the acidic oligosaccharides, alginic acid oligosaccharide (ALGO) and phosphoryl oligosaccharides (POs) by the Maillard reaction to reduce the immunogenicity of beta-LG. The molar ratios of beta-LG to ALGO and POs in the conjugates were 1:6 and 1:8. The carbohydrate-binding sites in the beta-LG-ALGO conjugate were partially identified to be (60)Lys, (77)Lys, (100)Lys, (138)Lys, and (141)Lys. The isoelectric point of each conjugate was lower than that of beta-LG. CD spectra indicated that the secondary structure of beta-LG was almost maintained after conjugation. The results of fluorescence studies indicated that the conformation around Trp had not changed in each conjugate and that the surface of each conjugate was covered with a saccharide chain. Structural analyses with monoclonal antibodies indicated that the conformation around (8)Lys-(19)Trp (beta-sheet, random coil, short helix) in the conjugates had changed, whereas the native structure was maintained around (15)Val-(29)Ile (beta-sheet) and (125)Thr-(135)Lys (alpha-helix). The beta-LG-ALGO and beta-LG-POs conjugates maintained 77 and 70% of the retinol binding activity of beta-LG. Conjugation with ALGO and POs substantially enhanced the thermal stability of beta-LG. The anti-beta-LG antibody response was markedly reduced after immunization with both conjugates in BALB/c, C57BL/6, and C3H/He mice. B cell epitopes of beta-LG and the conjugate recognized in these mice were determined with 15-mer multipin peptides, and the linear epitope profiles of the conjugates were found to be similar to those of beta-LG, whereas the antibody response to each epitope was dramatically reduced. In particular, effective reduction of the antibody response was observed in the vicinity of the carbohydrate-binding sites. Conjugation of beta-LG with these acidic oligosaccharides was effective in reducing the immunogenicity of beta-LG. The conjugates obtained in this study are edible, so they would be very useful for food application.     

Beta-lactoglobulin molten globule induced by high pressure.

Beta-lactoglobulin (beta-LG) was treated with high hydrostatic pressure (HHP) at 600 MPa and 50 degrees C for selected times as long as 64 min. The intrinsic tryptophan fluorescence of beta-LG indicated that HHP treatment conditions induced a conformational change. HHP treatment conditions also promote a 3-fold increase in the extrinsic fluorescence of 1-anilinonaphthalene-8-sulfonate and a 2.6-fold decrease for cis-paraneric acid, suggesting an increase in accessible aromatic hydrophobicity and a decrease in aliphatic hydrophobicity. Far-ultraviolet circular dichroism (CD) spectra reveal that the secondary structure of beta-LG converts from native beta-sheets to non-native alpha-helices following HHP treatment, whereas near-ultraviolet CD spectra reveal that the native tertiary structure of beta-LG essentially disappears. Urea titrations reveal that native beta-LG unfolds cooperatively, but the pressure-treated molecule unfolds noncooperatively. The noncooperative state is stable for 3 months at 5 degrees C. The nonaccessible free thiol group of cysteine121 in native beta-LG became reactive to Ellman's reagent after adequate HHP treatment. Gel electrophoresis with and without beta-mercaptoethanol provided evidence that the exposed thiol group was lost concomitant with the formation of S-S-linked beta-LG dimers. Overall, these results suggest that HHP treatments induce beta-LG into hydrophobic molten globule structures that remain stable for at least 3 months.     

Hydrophobic probe binding of beta-lactoglobulin in the native and molten globule state induced by high pressure as affected by pH,KIO(3) and N-ethylmaleimide

High hydrostatic pressure (HHP) at 500 MPa and 50 degrees C induces beta-LG into the molten globule state. Retinol, cis-parinaric acid (CPA), and 1-anilino-naphthalene-8-sulfonate (ANS) fluorescence from pH 2.5 to 10.5 in the presence of the native and molten globule states of beta-LG indicate that retinol binds to beta-LG in the calyx, CPA at the surface hydrophobic site, and ANS in multiple hydrophobic sites. HHP treatment results in a decrease of beta-LG affinity for retinol and CPA, suggesting conformational changes in the calyx and surface hydrophobic site of beta-LG during HHP treatment. beta-LG treated by HHP in the presence of N-ethylmaleimide (NEM) retains retinol affinity, suggesting that NEM protects the calyx conformation of beta-LG during HHP treatment. HHP treatment of beta-LG in the presence of KIO(3) exhibits a great decrease of CPA affinity compared to HHP-treated beta-LG in the absence of KIO(3), suggesting the formation of non-native disulfide bonding at the CPA binding site.     

Effects of high-pressure processing at low temperature on the molecular structure and surface properties of beta-lactoglobulin

High-pressure processing (HPP) was utilized to induce unfolding of beta-lactoglobulin (beta-LG). beta-Lactoglobulin solutions at concentrations of 0.5 mg/mL, in pH 7.5 phosphate buffer, were pressure treated at 510 MPa for 10 min at either 8 or 24 degrees C. The secondary structure, as determined by circular dichroism (CD), of beta-LG processed at 8 degrees C appeared to be unchanged, whereas beta-LG processed at 24 degrees C lost alpha-helix structure. Tertiary structures for beta-LG, as determined by near-UV CD, intrinsic protein fluorescence spectroscopy, hydrophobic fluorescent probe binding, and thiol group reactivity, were changed following processing at either temperature. The largest changes to tertiary structure were observed for the samples processed at 24 degrees C. Model solutions containing the pressure-treated beta-LG showed significant decreases in surface tension at liquid-air interfaces with values of 54.00 and 51.69 mN/m for the samples treated at 24 and 8 degrees C, respectively. In comparison, the surface tension for model solutions containing the untreated control was 60.60 mN/m. Changes in protein structure during frozen and freeze-dried storage were also monitored, and some renaturation was observed for both storage conditions. Significantly, the sample pressure-treated at 8 degrees C continued to display the lowest surface tension.     

Reduced immunogenicity of beta-lactoglobulin by conjugation with carboxymethyl dextran differing in molecular weight

To reduce the immunogenicity of beta-lactoglobulin (beta-LG), two beta-LG-carboxymethyl dextran (CMD) conjugates (Conj. 40 and Conj. 162) were prepared by using water-soluble carbodiimide (EDC). The molar ratios of beta-LG to CMD in Conj. 40 and Conj. 162 were 8:1 and 7:1, respectively. Each conjugate maintained approximately 50% of the retinol binding activity of beta-LG. Structural analyses by intrinsic fluorescence, CD spectra, and ELISA with monoclonal antibodies indicated that the surface of beta-LG in each conjugate was covered by CMD without great disruption of native conformation. By conjugation with CMD, the antibody response to beta-LG was reduced in BALB/c, C3H/He, and C57BL/6 mice, which was eminent in Conj. 162. The results of B cell epitope scanning using overlapping synthesized peptides showed that the linear epitope profiles of the conjugates were similar to those of beta-LG, whereas the antibody response to each epitope was reduced, which was eminent in Conj. 162. It was concluded that conjugation with CMD of higher molecular weight is effective in reducing the immunogenicity of beta-LG and that masking of epitopes by CMD is responsible for the reduced immunogenicity.     

Effect of physicochemical conditions on peptide-peptide interactions in a tryptic hydrolysate of beta-lactoglobulin and identification of aggregating peptides

The objective of this study was to characterize the changes in peptide solubility resulting from changing some physicochemical conditions in a tryptic hydrolysate of beta-lactoglobulin (beta-LG). The turbidity (500 nm) of a 1% solution of tryptic peptides was measured at pH 3-10, at 5, 25, and 50 degrees C, in the presence of different salt concentrations (0, 0.5, and 1 M NaCl), in the presence of denaturing and reducing agents (6 M urea, 5% SDS, or 5% beta-mercaptoethanol), and under an electric field (isoelectric focusing). The results reveal an increase in turbidity of the peptide solution at pH 4, but a slight increase in turbidity was also observed at pH 8, which is attributable to peptides linked by disulfide bridges. The effect of temperature and ionic strength on the turbidity occurring at pH 4 indicates that mainly hydrophobic interactions are involved in the aggregation process. The material in the precipitate at pH 4 was identified as the peptides beta-LG 1-8, 15-20, and 41-60 and non-hydrolyzed alpha-lactalbumin. These results suggest that a limited number of peptides are involved in the aggregation process observed at pH 4, some of which having bioactive (beta-LG 15-20, ACE inhibitor, and opioid) or emulsifying properties (beta-LG 41-60). Aggregation of these peptides at acidic pH indicates that a simple acidification step could represent an easy process for isolating peptidic fractions enriched in bioactive or functional peptides.     

Heat treatment of beta-lactoglobulin: structural changes studied by partitioning and fluorescence

Functional properties of whey protein concentrates (WPC) are primarily dependent on the degree of denaturation of beta-lactoglobulin (beta-LG), the major globular whey protein. Irreversible modifications in the tertiary structure and association state of beta-LG after heat treatment were studied by partition in aqueous two-phase systems and fluorescence quenching. Partitioning of preheated beta-LG in two-phase systems containing 5% (w/w) poly(ethylene glycol) and 7% (w/w) dextran, between pH 6.0 and7.0, are appropriately related with the intensity of heat treatment. An increase in the partition coefficient of beta-LG was observed with increasing temperature of heat treatment. On the other hand, fluorescence quenching of beta-LG by acrylamide was used to study the conformational flexibility of the protein at pH values between 4. 0 and 9.0. The values of bimolecular quenching rate constant (k(q)) obtained showed that beta-LG appears to be more flexible at high pH values, while at low pH the protein assumes a more compact form. The efficiency of acrylamide quenching on preheated beta-LG was substantially more pronounced than for the untreated protein. This difference can be ascribed to the presence of unfolded monomers and aggregates of denatured molecules formed after heat treatment, whose tryptophanyl residues are more exposed to the solvent. In conclusion, the results suggest that partition studies in aqueous two-phase systems and fluorescence quenching are very useful tools to detect changes in conformation and aggregation of beta-LG induced by heat treatment.     

Effect of Solvent and Temperature on Secondary and Tertiary Structure of Zein by Circular Dichroism

Circular dichroism studies were performed on zein to determine how the secondary and tertiary structure changes with different solvents, temperatures, or pH. Alcoholic solvent type and common denaturants such as SDS and low amounts of urea had little effect on the secondary structure of zein. Utilization of dimethylformamide or acetic acid as solvent gave changes in tertiary structure. Solutions of zein in 8M urea produced solutions with large changes in tertiary structure. The dissolution of zein in 50 mM sodium hydroxide produces a zein with large changes in secondary and tertiary structure and little loss in primary structure. Increasing the temperature of zein to 70°C in 80% ethanol-water gave reversible changes in the primary structure (20% reduction in absolute magnitude of [θ]λ at 208 and 222 nm) and tertiary structure (40% reduction in absolute magnitude of [θ]λ at 268 nm).     

Pressure-induced unfolding and aggregation of the proteins in whey protein concentrate solutions

Whey protein concentrate solutions (12% w/v, pH 6.65 +/- 0.05) were pressure treated at 800 MPa for 20-120 min and then examined using size exclusion chromatography (SEC), small deformation rheology, transmission electron microscopy, and various types of one-dimensional (1D) and two-dimensional (2D) polyacrylamide gel electrophoresis (PAGE). The pressure-treated samples showed a time-dependent loss of native whey proteins by SEC and 1D PAGE and a corresponding increase in non-native proteins and protein aggregates of different sizes. These aggregates altered the viscosity and opacity of the samples and were shown to be cross-linked by intermolecular disulfide bonds and by noncovalent interactions using 1D PAGE [alkaline (or native), sodium dodecyl sulfate (SDS), and SDS of reduced samples (SDS(R))] and 2D PAGE (native:SDS and SDS:SDS(R)). The sensitivity of the major whey proteins to pressure was in the order beta-lactoglobulin B (beta-LG B) > beta-LG A > bovine serum albumin (BSA) > alpha-lactalbumin (alpha-LA), and the large internal hydrophobic cavity of beta-LG may have been partially responsible for its sensitivity to high-pressure treatments. It seemed likely that, at 800 MPa, the formation of a beta-LG disulfide-bonded network preceded the formation of disulfide bonds between alpha-LA or BSA and beta-LG to form multiprotein aggregates, possibly because the disulfide bonds of alpha-LA and BSA are less exposed than those of beta-LG either during or after pressure treatment. It may be possible that intermolecular disulfide bond formation occurred at high pressure and that hydrophobic association became important after the high-pressure treatment.     

Fractionation of beta-lactoglobulin tryptic peptides by ampholyte-free isoelectric focusing.

Solutions of tryptic hydrolysate of bovine beta-lactoglobulin were fractionated by liquid-phase IEF in a preparative Rotofor cell at constant power for 2 h without ampholytes in order to identify interactions between peptides. The 20 peptide fractions collected were analyzed by capillary electrophoresis and SDS-PAGE under native, denaturing, and reducing conditions. The hydrolysate was shown to be composed mainly of acidic peptides (pI 2-5, 62%) of molecular mass below 6 kDa, and numerous disulfide bonds were detected. Purified peptides (beta-LG 15-20, 71-75, 76-82, and 84-91) were also focused individually and in mixtures and matched to components of the IEF fractions obtained from the tryptic hydrolysate of beta-LG. The separation of acidic (beta-LG 84-91) and basic (beta-LG 76-82) peptides was achieved by IEF, whereas uncharged peptides (beta-LG 15-20 and 71-75) were poorly separated due to their low electrophoretic mobility. Because no peptide-peptide interaction could be identified by IEF fractionation, it is suggested that electrical fields may decrease electrostatic interactions between charged peptides.     

Desorption behavior of sorbed flavor compounds from packaging films with ethanol solution

Desorption behavior of sorbed flavor compounds such as ethyl esters, n-aldehydes, and n-alcohols from LDPE and PET films was investigated in 0 to 100% (v/v) ethanol solutions at 20 degrees C, 50 degrees C, and 60 degrees C. In both films, the desorption apparently increased with increasing ethanol concentration and treatment temperature, depending on the compatibility of the flavor compound with the solvent. Namely, the partition coefficient of ethyl esters, n-aldehydes, and n-alcohols in the LDPE film turned out to be approximately zero at >/=60%, >/=80%, and >/=40% (v/v) ethanol, respectively (for PET film, >/=80%, >/=80%, and >/=40% (v/v) ethanol concentrations were required for complete desorption, respectively). As for physical properties (heat of fusion, melting point, and tensile strength and elongation at break) of LDPE and PET films, there were no significant differences between intact film and the treated film with 60% (v/v) ethanol for 30 min at 60 degrees C. These results suggest that it is possible to apply a desorption solvent such as ethanol solution for desorption of sorbed flavor compounds from packaging films with no physical change in the film properties by this desorption treatment.     

Interactions between bovine beta-lactoglobulin and peptides under different physicochemical conditions

The aim of this study was to determine if peptides could interact with beta-lactoglobulin (beta-LG) and what the physicochemical conditions promoting their interaction with the protein are. The binding of negatively charged (beta-LG 125-135 and 130-135), positively charged (beta-LG 69-83 and 146-149), and hydrophobic (alphaS1-CN 23-34 and beta-LG 102-105, both bioactive peptides) peptides to bovine beta-LG was determined using an ultrafiltration method under different physicochemical conditions: pH 3.0, 6.8, and 8.0; buffers of 0.05 and 0.1 M; 4, 25, and 40 degrees C; beta-LG/peptide ratios of 1:5 and 1:10. At pH 3.0, none of the peptides interacted with beta-LG at any temperature, buffer molarity, or beta-LG/peptide ratio probably due to electrostatic repulsions between the highly protonated species. At pH 6.8 and 8.0, charged peptides beta-LG 130-135, 69-83, and 146-149 bound to beta-LG under some physicochemical conditions, possibly by nonspecific binding. However, both hydrophobic peptides probably bind to the inner cavity (beta-barrel) of beta-LG, provoking the release of materials absorbing at 214 nm. Given the known biological activities of the hydrophobic peptides used in this study (opioid and ACE-inhibitory activities), their binding to beta-LG may be relevant to a better understanding of the physiological function of the protein.     

Isolation of homogeneous fractions from wheat water-soluble arabinoxylans. Influence of the structure on their macromolecular characteristics

Water-soluble arabinoxylans from wheat flour were purified and fractionated by graded ethanol precipitation. Six fractions were obtained at 20% (F20), 30% (F30), 40% (F40), 50% (F50), 60% (F60), and 70% (F70) saturation with ethanol. Neutral sugars and (1)H NMR analyses revealed differences in structural characteristics. The Ara/Xyl ratio and the amount of Xylp residues disubstituted increased with ethanol concentration. Ferulic acid content was higher in fractions precipitated at low ethanol percentage. Fractions were refractionated by SEC, leading to 46 subfractions with low polydispersity index. Substitution degree was apparently linearly related to the amount of disubstituted Xylp. Macromolecular characteristics (M(w), [eta], R(G), q, nu) determined by multiangle laser light scattering and viscosimetry were similar among all fractions. A rather flexible conformation was determined for the arabinoxylans, in conflict with the admitted rodlike conformation. The substitution degree had no influence on the conformation or on the rigidity of the polymers. Evidence for the presence of ferulic acid dimers in the water-soluble arabinoxylans is provided, which probably explains the unexpected conformation and macromolecular characteristics.     

A circular dichroism and fluorescence spectrometric assessment of effects of selected chemical denaturants on soybean (Glycine max L.) storage proteins glycinin (11S) and beta-conglycinin (7S)

Soybean glycinin (11S) and beta-conglycinin (7S) were subjected to select chemical treatments at various concentrations and resulting changes in protein structures were investigated by circular dichroism (CD) and fluorescence spectrometry. Fluorescence quenching results indicated that urea >/=3 M caused significant unfolding of 11S, but not that of 7S. GuHCl was more effective than urea in denaturation of 11S. A two-step transition in 11S structure was observed with a possible existence of a folding intermediate at 2.5 M GuHCl. Sodium dodecyl sulfate (SDS) measurably altered secondary and tertiary structures of 11S and 7S below SDS critical micellar concentration (CMC), possibly due to formation of mixed peptide-SDS micelles. SDS treatment increased alpha-helical and unordered structures of both proteins at the expense of beta-sheet structure. NaCl and CaCl 2 caused a significant decrease in fluorescence intensity without shifting emission lambda max. Exposure of 7S and 11S to NaSCN respectively at >/=0.3 and >/=0.6 M NaSCN caused a significant increase in fluorescence intensity measured at the corresponding lambda max of the protein. beta-Mercaptoethanol (beta-ME), N-ethylmaleimide (NEM), and phytic acid caused variable red shifts, 2.5-4 nm, in the emission lambda max.     

Denaturation of beta-lactoglobulin in pressure-treated skim milk

The kinetics of beta-lactoglobulin (beta-LG) denaturation in pressure-treated reconstituted skim milk samples over a wide pressurization range (100-600 MPa) and at various temperatures (10-40 degrees C) was studied. Denaturation was extremely dependent on the pressure and duration of treatment. At 100 MPa, no denaturation was observed regardless of the temperature or the holding time. At higher pressures, the level of denaturation increased with an increasing holding time at a constant pressure or with increasing pressure at a constant holding time. At 200 MPa, there was only a small effect of changing the temperature at pressurization. However, at higher pressures, increasing the temperature from 10 to 40 degrees C markedly increased the rate of denaturation. The two major genetic variants of beta-LG (A and B) behaved similarly to pressure treatment, although the B variant appeared to denature slightly faster than the A variant at low pressures (< or =400 MPa). The denaturation could be described as a second-order process for both beta-LG variants. There was a marked change in pressure dependence at about 300 MPa, which resulted in markedly different activation volumes in the two pressure ranges. Evaluation of the kinetic and thermodynamic parameters suggested that there may have been a transition from an aggregation-limited reaction to an unfolding-limited reaction as the pressure was increased.     

Heat-induced redistribution of disulfide bonds in milk proteins. 2. Disulfide bonding patterns between bovine beta-lactoglobulin and kappa-casein

Heat treatment of milk causes the heat-denaturable whey proteins to aggregate with kappa-casein (kappa-CN) via thiol-disulfide bond interchange reactions. The particular disulfide bonds that are important in the aggregates are uncertain, although Cys(121) of beta-lactoglobulin (beta-LG) has been implicated. The reaction at 60 degrees C between beta-LG A and an activated kappa-CN formed small disulfide-bonded aggregates. The tryptic peptides from this model system included a peptide with a disulfide bond between a Cys residue in the triple-Cys peptide [beta-LG(102-124)] and kappa-CN Cys(88) and others between kappa-CN Cys(88) or kappa-CN Cys(11) and beta-LG Cys(160). Only the latter two novel disulfide bonds were identified in heated (90 degrees C/20 min) milk. Application of computational search tools, notably MS2Assign and SearchXLinks, to the mass spectrometry (MS) and collision-induced dissociation (CID)-MS data was very valuable for identifying possible disulfide-bonded peptides. In two instances, peptides with measured masses of 4275.07 and 2312.07 were tentatively assigned to beta-LG(102-135):kappa-CN(11-13) and beta-LG A(61-69):kappa-CN(87-97), respectively. However, sequencing using the CID-MS data demonstrated that they were, in fact, beta-LG(1-40) and beta-LG(41-60), respectively. This study supports the notion that reversible intramolecular disulfide-bond interchange precedes the intermolecular interchange reactions.     

Gelling properties of heat-denatured beta-lactoglobulin aggregates in a high-salt buffer

Thermal denaturation, rheological, and microstructural properties of gels prepared from native beta-lactoglobulin (beta-LG) and preheated or heat-denatured beta-LG (HDLG) aggregates were compared. The HDLG was prepared by heating solutions of 4% beta-LG in deionized water, pH 7.0, at 80 degrees C for 30 min and then diluted to the desired concentration in 0.6 M NaCl and 0.05 M phosphate buffer at pH 6.0, 6.5, and 7.0. When reheated to 71 degrees C, HDLG formed a gel at a concentration of 2% protein. At pH 7.0, 3% HDLG gelled at 52.5 degrees C and had a storage modulus (G') of 2200 Pa after cooling. beta-LG (3%) in 0.6 M NaCl and 0.05 M phosphate buffer, pH 7.0, did not gel when heated to 71 degrees C. The gel point of 3% HDLG decreased by 10.5 degrees C and the G' did not change when the pH was decreased to 6.0. The HDLG gel microstructure was composed of strands and clumps of small globular aggregates in contrast to beta-LG gels, which contained a particulate network of compacted globules. The HDLG formed a gel at a lower concentration and lower temperature than beta-LG in the high-salt buffer, suggesting an application in meat systems or other food products prepared with salt and processed at temperatures of < or =71 degrees C.