Dye-resist properties of reactive dye-resist agents in acid dyeing of silk

The dye-resist effect of reactive dye-resist agents in acid dyeing of silk was investigated. The dye-resist agent containing dichlorotriazine achieved a higher resist effectiveness than others since they make a charge barrier against diffusion in the silk fiber periphery due to the high reactivity of dichlorotriazine group. Especially, the increase in the number of ionic groups in acid dyes leads to better electrostatic repulsion of reactive dye resist agent treated silk and thus improves the resist effectiveness. However, the hydrophobicity effect of acid dyes on the dye-resist properties was relatively minor.     

Superfine pigment dyeing of silk fabric by exhaust process

The surface of silk is modified by a cationic reagent, N-(3-chloro-2-hydroxypropyl) trimethylammonium chloride(CHTAC) in order to enable the fibre to be dyed with superfine pigments by an exhaust process. The effects of cationization pretreatment conditions such as the amount of cationic reagent, pH, treatment temperature and time on color yield are discussed in detail. The result shows that the condition suitable for modification treatment is that the concentrationc of cationic reagent is 10 g/l, pH 8, liquor to goods ratio of 100:1 and 60°C for 30 min. The white index decreases with the increase of alkali of cationic treatment. The crock fastness and wash fastness of silk dyed by pigment exhaust dyeing achieve 3–4 and 4 scale, respectively. The treated silk fabrics still retain a soft handle because the bending rigidity B and hysteresis 2HB increase slightly after cationization pretreatment and dyeing procedure. It has been demonstrated that properties of surface modified silk dyed with superfine pigment by exhaust process are acceptable.     

Dye-resist properties of hetero-multifunctional dye-resist agents in acid dyeing of wool

The dye-resist effect and leveling properties of hetero-mulifunctional dye-resist agents in acid dyeing of wool were investigated. The dye-resist agent with dichlorotriazinyl group achieved better resist effectiveness than those with monochlorotriazinyl group. The resist effectiveness was improved by increasing the number of sulfonate group in dye-resist agents. Also, the resist agents with more sulfonate groups showed better dye-assist effectivness, attributable to the increased electrostatic attraction between dye-resist agents and the cationic dye. However, the leveling properties of dye-resist agents decreased with the number of sulfonate groups in the molecule.     

Sonicator dyeing of modified cotton, wool and silk with Mahonia napaulensis DC. and identification of the colorant in Mahonia

Mahonia napaulensis DC. (local name—Taming) family Berberidaceae, produces natural dye from its stem which has been used for dyeing textiles by the Apatanis (a tribe of Arunachal Pradesh) since ancient times. Sonicator dyeing with Mahonia napaulensis showed marked improvement in dye uptake. It showed that pretreatment with metal mordant (2%, w/w with respect to the fabric) improved substantially the fastness properties for dyed cotton, silk fabrics and wool yarn. Five fractions were isolated from column chromatography of the stem extract of Mahonia. Attempts have been made to identify these fractions by matching the spectral data which indicated that they were from a well-known isoquinoline alkaloid family.     

Effect of acid modification on dyeing properties of Rajshahi silk fabric with different dye classes

In this paper, Rajshahi silk fabric was modified by acetic acid, tannic acid and their mixture. After acid modification, the silk fabric was dyed with three dyes classes namely: Reactive Orange 14, Direct Yellow 29 and Mordant Blue 9. Results revealed that the fabric modified with acid mixture of 30 % acetic acid and 20 % tannic acid improved the colorfastness of the dyed fabric after 7 days exposure on simulated sunlight and washing with hot soap solution. Also, the acid modification could improve the dyed fabrics’ colorfastness properties to acids and alkalis. Optimum dyeing condition was observed at 1.5, 2.0, and 2.0 % dyes for Reactive Orange 14, Direct Yellow 29 and Mordant Blue 9 respectively. The optimum dyeing time was observed 50, 60, and 50 min; and temperature was 90, 100 and 80 °C respectively. Modification of silk fabrics with acids improves the dyeability and colorfastness of Rajshahi silk fabrics. However, the acid modification could reduce the loss in tenacity of silk fabric upon exposure to sunlight.     

pH control for dyebath reuse in dyeing of polyamide with binary mixtures of acid dyes

Hydrolyzable organic esters were compared with ammonium sulphate as an acid donor for the pH control in dye-bath-reuse system of acid dyes mixtures. The ability of pH control, levelness, dyeing properties and reproducibility in dye-bath-reuse system were investigated comparatively. Hydrolyzable organic esters showed higher exhaustion and color yield than ammonium sulphate. In addition, hydrolyzable organic ester exhibited very low conductivity less than 0.5 mS, while ammonium sulphate give high conductivity. However, we could not observe any difference in levelness of dyed samples between two kinds of acid donors in laboratory scale dyeing. Over 10 cycles of reuse, hydrolyzable organic esters showed higher reproducibility than ammonium sulphate. No deterioration of the color fastness and levelness occurs over 10 cycles of reuse.     

Dyeing and fastness properties of a reactive disperse dye on PET, nylon, silk and N/P fabrics

Dyeing and color fastness properties of a reactive disperse dye containing an acetoxyethylsulphone group on PET, Nylon, silk and N/P fabrics were examined. The reactive disperse dye exhibited almost the same dyeing properties on PET fabric as a conventional disperse dye except the level of dye uptake. The most appropriate pH and dyeing temperature for the dyeing of Nylon fabric were 7 and 100°C respectively. The build-up on Nylon fabric was good and various color fastnesses were good to excellent due to the formation of the covalent bond. Application of the reactive disperse dye on silk fabric at pH 9 and 80°C yielded optimum color strength. The rate of dyeing on Nylon fabric was faster than that on PET fabric when both fabrics were dyed simultaneously in a dye bath, accordingly color strength of the dyed Nylon was higher. The reactive disperse dye can be applied for one-step and one-bath dyeing of N/P mixture fabric with good color fastness.     

Sonicator dyeing of natural polymers with <Emphasis Type="Italic">Symplocos spicata</Emphasis> by metal chelation

Symplocos spicata (local name: Dom sheng) belonging to Family Symplococeae produces yellowish brown natural dye which has been used for dyeing textiles since ancient times by the Monpas tribe of Arunachal Pradesh. Symplocos spicata (Dom Sheng) was found in the Lumla area of Tawang district. Leaves of the plant are used by the Monpas and Tibetans for extraction of dye. Innovative sonicator dyeing with S. spicata showed that pretreatment with 2–4% metal mordant of the weight of the fabric is optimum showing very good fastness properties for dyed natural polymers such as cotton, wool, and silk. CIELab and K/S of the dyed fabrics were also evaluated. The superiority of sonicator dyeing over conventional dyeing has been established through this study.     

Dyeing of cotton and silk yarn with the extracted dye from the fruit hulls of mangosteen,<Emphasis Type="Italic">Garcinia mangostana</Emphasis> linn

The extracted dye from the dried fruit hulls of mangosteen was used as a natural dye for the dyeing of cotton and silk yarn. The optimal conditions for dye extraction were to extract the dried fruit hulls of mangosteen at 80°C for 1 hour with a 15 % w/v citric acid solution in a 1:4 ratio of mangosteen powder to solvent. Cotton dyeing with the extracted dye from the dried fruit hulls of mangosteen was carried out at 60°C for 60 minutes with a material to liquor ratio of 1:25. The effect on dyeing of mordant type with different mordanting methods was studied. The results showed that the dyeing of cotton using the post-mordanting method with ferrous sulfate and calcium hydroxide not only provided better depth of shade but also provided better wash fastness and light fastness than with other mordants (alum; zinc tetrafluoroborate) or without a mordant. Good fastness properties were also obtained using a post-mordanted silk with calcium hydroxide.     

Influence of insecticidal plant materials used during storage on sensory attributes and instrumental hardness of dry edible beans (Phaseolus vulgaris L.)

Three plant products with known insecticidal properties, a dry extract of flowers ofChrysanthemum cinerariaefolium (Trevir.) Vis. produced in Rwanda, an ethanol extract of seeds of neem,Azadirachta indica A. Juss., and crushed leaves ofTetradenia riparia Hochst Codd., a traditional Rwandan medicine, were mixed with beans,Phaseolus vulgaris L., for storage protection. These plant-protected beans were compared with off the shelf beans that were being sold to consumers by the Rwandan National Agricultural Products Marketing Organization (OPROVIA). A trained sensory panel determined that beans treated with neem andC. cinerariaefolium were as acceptable after 8 months storage as those being sold throughout Rwanda by the marketing organization. Beans marketed by this organization were all treated with the standard insecticide application in Rwanda, 0.01% weight/weight pirimiphos methyl in a powder formulation. Instrumental hardness (% hard-to-cook/mean gram force) after 20 months of storage was acceptable for beans stored with neem or withC. cinerariaefolium or with the conventional government application of pirimiphos methyl. Use of either neem orC. cinerariaefolium for storage protection should not affect consumer acceptance of dry beans.     

Preparation of nano disperse dyes from nanoemulsions and their dyeing properties on ultramicrofiber polyester

Six nano disperse dyes were prepared using corresponding O/W nanoemulsions which were obtained with sodium laurylsulphate and caprylic triglyceride. The average particle size of the dyes prepared were in the range of 110–130 nm. Exhaust dyeing using nano dyes resulted in low exhaustion yields of 17–26 % on regular polyester fiber and 28–38 % on ultramicrofiber polyester. The observed low exhaustion yields of nano disperse dye can be explained by the solubilization of dye particles into surfactant micelles as well as the high stability of the nanoemulsions, these might reduce the capacity of dye uptake onto the fibers. However, higher K/S values of dyeings with nano dyes on ultramicrofiber sites compared to those on regular polyester sites suggested their potential to be more efficient dyes for finer denier microfiber polyesters.     

Eco-friendly dyeing of poly(trimethylene terephthalate) with temporarily solubilized azo disperse dyes based on pyridone derivatives

Dispersant-free PTT dyeing of temporarily solubilized azo disperse dyes based on pyridone moiety which contain β-sulfatoethylsulfonyl group was investigated. The dyes were successfully applied to PTT without the use of dispersants. The color yields of the dyes on PTT fabric were dependent on dyeing pH as well as dyeing temperature. The optimum results were obtained at pH 5–6 and 110 °C. The dyes showed alkali-clearing property and exhibited good to excellent fastness on the PTT fabric. The COD levels of the dyeing effluent from the temporarily solubilized disperse dyes were much smaller than those from commercial disperse dye.     

Influence of processing temperature on the water vapour transport properties of wheat gluten based agromaterials

The influence of processing conditions (thermoforming temperature) on water vapour transport properties (permeability, sorption and diffusion) of wheat gluten-based films was studied in relation to structural properties (cross-linking degree of the wheat gluten matrix). Increasing temperature from 80 °C to 120 °C led to a significant decrease in material swelling in high moisture environment and a WVP reduction mainly due to a decrease in diffusivity but without important effect on the moisture sorption isotherms. This was attributed to a higher cross-linking degree of protein network for film thermoformed at 120 °C, with a limited mobility and less possibilities of rearrangement in high moisture conditions.     

Effect of enzymatic treatment and reactive dyeing on the low stress mechanical properties of linen fabric

The present study was concerned mainly with the assessment of the modification of low stress mechanical properties of linen fabric that were induced by enzymatic treatment. In addition, the effect of dyeing with reactive dye on the enzyme treated linen fabric on the low stress mechanical properties were also investigated. Kawabata Evaluation System for Fabric (KES-F) instrument was used for assessing the low stress mechanical properties, i.e. tensile, shearing, bending, compression, and surface properties. Experimental results showed that the enzymatic treatment could alter those properties to different extent depending much on the concentration of enzyme used.     

Effects of drought and the presence of the 1BL/1RS translocation on grain vitreosity, hardness and protein content in winter wheat

Grain texture is an important component of end-use quality in wheat. The effects of water availability on the components of texture; vitreosity, determined using a Light Transflectance meter (LTm), grain hardness measured using the single-kernel characterisation system (SKCS), and protein content, were studied in field experiments of winter wheat in the UK in 2001/2002 and 2002/2003. Experiments were grown on a drought prone soil and employed a mapping population of 46 doubled haploid (DH) lines and their parents, Beaver (+1BL/1RS, soft wheat) and Soissons (1B, hard wheat). The results showed that drought increased hardness in both seasons, but the effect was never sufficient to move a line from the soft class into the hard class. Puroindoline (PIN)-a:b peak height ratio explained ca. 78% of the variation in hardness, and drought also appeared to increase the amounts of PINs in the grain. Minor quantitative trait loci (QTLs) were found for hardness on chromosomes 2A, 2D, 3A and 6D, also associated with QTLs for PINs. Vitreosity also increased in response to drought in both seasons. Variation in vitreosity explained 7–11% of the overall variation in texture within a hardness class, with hardness increasing on average by 2.2 SKCS units for each 10% increase in the proportion of vitreous grains. The relationship between vitreosity and protein content was poor, despite the fact that protein content also increased in response to drought. Minor QTLs associated with both protein content and vitreosity were found on chromosomes 1B, 4D and 5D. A minor QTL for vitreosity was also found on chromosome 2D. However, there appeared to be no direct relationship between alleles at the Ha locus, the gene which controls the difference between hard and soft wheats, and vitreosity. A positive relationship between the presence of the 1BL/1RS translocation and the proportion of vitreous grains was identified, suggesting that vitreosity was strongly linked to changes in protein quality.     

Isolation, identification and dyeing studies of betanin on modified acrylic fabrics

Mature red fruits of Opuntia ficus-indica contain two soluble pigment, betanin and indicaxanthin. The optimal conditions for dye extraction were to mix 50 g of juice from cactus pears with 100 mL of acidified water as solvent for dye extraction. Two main dyes were purified from the pigment extract by chromatography and identified by UV-vis, HPLC and LC-MS techniques as indicaxanthin (15 mg per 100 g) and betanin (280 mg per 100 g). The effect of dye bath pH, salt concentration, dyeing time and temperature was studied. The optimal conditions for dyeing modified acrylic fabrics with betanin dye were carried out at 50 °C for 45 min at pH 5. Un-mordanted samples have good properties of water and washing fastness. Mordant CoSO₄ was found to give good light fastness (rating 5).     

The effects of electrical discharge on the mechanical properties of <Emphasis Type="Italic">Bombyx mori</Emphasis> silk fibroin

Bombyx Mori is a representative of natural fibers which is known for its mechanical stability. In this study, electrical discharge of the fibers exposed to different voltages for certain periods was examined and mechanical lifetime was measured and also the structure parameters U _o and γ were calculated. We observed that crosslinks might be formed at the silk fibers exposed to high voltages and as a result, fibers become more resistant to mechanical effects.     

Mineral nutrition and water use patterns of a maize/cowpea intercrop on a highly acidic soil of the tropic semiarid

Due to global warming, water is expected to become scarce especially in semiarid regions. Therefore, there is a need to increase the efficiency in water use by crops under rainfed agriculture. The effect of nutrient availability on the growth, production, root development, water relations and water use efficiency (WUE) by the intercrop maize/cowpea was investigated in 2 contrasting years (dry and wet) in the semiarid region of Brazil. The crops were grown on a strongly acidic, sandy soil with three treatments: (i) application of NPK fertilizers plus lime (NPK + lime), (ii) application of NPK fertilizers (NPK) and (ii) control (Contr.) in low and high input regimes. The soil water balance was calculated with the crop model EPICSEAR. Application of fertilizers and lime increased biomass production and grain yield of the intercrop up to 400% and 550%, respectively, and maize suffered more from the effects of low nutrient availability and soil acidity than cowpea. The root development of both crops was strongly improved by the application of NPK and lime and cowpea developed a deeper root system which enabled this crop to keep a higher transpiration rate in the dry year. As a consequence of the shallow root system, maize was prone to water stresses caused by the dry spells and its harvest index was reduced when dry spells occurred during flowering and grain filling.     

模拟酸雨对花生种子萌芽及幼苗生长的影响

以人工模拟酸雨试验研究不同酸度酸雨对花生种子萌发和幼苗生长的影响，试验结果表明，pH值4．5以下的酸雨可显著地降低花生种子的发芽率，使胚根长度变短，活力指数下降，高酸度的模拟酸雨胁迫使花生幼苗叶总数显著减少，叶片出现明显的受害症状，pH值2．5的模拟酸雨胁迫使叶绿素含量明显下降，过氧化氢酶活性显著增强，酸雨还对土壤具有酸化作用。     

氮和磷对不同基因型小麦水分状况的影响

为了阐明不同水分条件下氮、磷对不同基因型小麦的水分生理指标的作用及其变化趋势，试验逸用6个不同基因型的小麦进化材料，研究了拔节期各基因型小麦的叶片保水力、叶水势、叶片膜透性与气孔导度。结果表明，当土壤水分充足时，施肥会提高叶片保水力、叶水势，降低叶片膜透性，增加二倍体小走的气孔导度，而降低六倍体小走的气孔导度。在水分胁迫下，施肥会提高叶片保水力，降低叶水势、叶片膜透性和气孔导度；而且随小麦染色体倍性从2n→4n→6n的进化方向，小麦叶片保水力、叶水势、叶片膜透性均先降低，然后又升高。