Susceptibility of Waxy Starch Granules to Mechanical Damage

Starch samples isolated from wheat flour that represented four possible waxy states (0, 1, 2, and 3‐gene waxy) were subjected to crushing loads under both dry and wet conditions. Calibrated loads of 0.5–20 kg were applied to the starch samples and the percentage of damaged granules was visually determined. Under dry crushing conditions, starches containing amylose (0, 1, and 2‐gene waxy) had between 1% (5‐kg load) to 3% (15‐ and 20‐kg load) damaged granules, whereas waxy starch (3‐ gene waxy; <1% amylose) began rupturing at 0.5‐kg load (3.5% damaged granules) and had 13% damaged granules when ≥10‐kg load was applied. Under wet crushing conditions, normal and partial waxy starch (0, 1, and 2‐gene waxy) showed little difference in percentage of damaged granules when compared to the results of dry crushing. Waxy starch (3‐gene waxy), however, showed substantially increased numbers of damaged granules: 12% damaged granules at 0.5‐kg load, rising to 55% damaged granules at 15‐kg load. The results indicate that waxy starch granules are less resistant to mechanical damage than normal starch granules. Furthermore, blends of normal and waxy wheats or wheat flours intended to have a particular amylose‐amylopectin ratio will be a complex system with unique processing and formulation considerations and opportunities.     

Resistance to α‐Amylase Digestion in Four Native High‐Amylose Maize Starches

Native and processed high‐amylose maize starch (HAMS) is an important source of resistant starch (RS). The objectives of this work were to use an in vitro procedure to estimate the RS content of native granules from a series of ae‐containing HAMS genotypes, and to examine the nature of the α‐amylase resistant starch (ARS). By the method of Englyst et al (1992), RS for ae V, ae VII, ae su2, and ae du were estimated to be 66.0, 69.5, 69.5, and 40.6%, respectively. By transmission electron microscopy, most of the residual granules from ae V, ae VII, and ae su2 showed little evidence of digestion. Partially digested granules had a radial digestion pattern in the interior and an enzyme‐resistant layer near the surface. Size and chain‐length profile of constituents of ARS were similar to those of the native HAMS (unlike type 3 RS), consistent with complete hydrolysis in susceptible granule regions. Between crossed polarizers, many iodine‐stained native and residual HAMS granules had blue centers and pink exteriors, which may be due to a difference in orientation of the amylose‐iodine complexes in the exterior. Four granule color types were observed for ae du, differing in enzyme resistance. The high‐enzyme resistance of native HAMS granules may result from altered granule organization, which appears to vary among and within granules from ae‐containing genotypes.     

A Study of Maize Endosperm Hardness in Relation to Amylose Content and Susceptibility to Damage

The relative amounts of amylose and amylopectin in maize starch were determined in samples representing hard and soft endosperm. Although differences were small, amylose content differed significantly (P < 0.001 and P < 0.05) between the two types of endosperm, with hard endosperm containing a higher percentage of amylose. Scanning electron microscopy was used to determine that the surface appearance of starch granules from hard and soft endosperm differed. Starch granules from soft endosperm had randomly distributed pores on their surfaces, which had a rough appearance. Few pores were observed on granules from hard endosperm. A fairly common occurrence with starch granules from soft endosperm was the development of wrinkles or fissures upon prolonged exposure to the beam of the electron microscope. Thus, a correlation existed between endosperm hardness, amylose content, and susceptibility to wrinkling and fissures. The granules of the soft endosperm of maize, presumably less mature than the granules of the hard endosperm, have a lower amylose content (20.5 ± 1.9% vs. 23.0 ± 1.0%), exhibit more surface pores, and are more susceptible to wrinkling in an electron beam, compared with granules of the hard endosperm. Results suggested that the composition and internal architecture of the starch granule differ depending on the hardness of the endosperm from which it was obtained.     

Separation and Characterization of A- and B-Type Starch Granules in Wheat Endosperm

Mature wheat (Triticum aestivum L.) endosperm contains two types of starch granules: large A-type and small B-type. Two methods, microsieving or centrifugal sedimentation through aqueous solutions of sucrose, maltose, or Percoll were used to separate A- and B-type starch granules. Microsieving could not completely separate the two types of starch granules, while centrifuging through maltose and sucrose solutions gave a homogenous population for B-type starch granules only. Centrifuging through two Percoll solutions (70 and 100%, v/v) produced purified populations of both the A- and B-type starch granules. Analysis of starch granule size distribution in the purified A- and B-type granule populations and in the whole-starch granule population obtained directly from wheat endosperm confirmed that the purified A- and B-type starch granule populations represented their counterparts in mature wheat endosperm. Centrifugations through two Percoll solutions were used to purify A- and B-type starch granule populations from six wheat cultivars. The amylose concentrations and gelatinization properties of these populations were analyzed. All of the A-type starch granules contained higher amylose concentrations and had higher gelatinization enthalpies than did B-type starch granules. Although A- and B-type starch granules started to gelatinize at a similar temperature, B-type starch granules had higher gelatinization peak and completion temperatures than did A-type starch granules     

Measurement of Wheat Starch Granule Size Distribution Using Image Analysis and Laser Diffraction Technology

Starch was isolated from flour of four wheats representing hard red winter (Karl), hard red spring (Gunner), durum (Belfield 3), and spelt (WK 86035‐8) wheat classes. Digital image analysis (IA) coupled with light microscopy was used to determine starch size distributions where the volume of granules was calculated as spherical particles or oblate spheroids. Starch granules were classified into three size ranges: A‐type granules (> 15 μm), B‐type granules (5–15 μm), and C‐type granules (<5 μm). An error was noted in using digital image analysis because the perimeter of some granules touch the edge (PTE) of the field being analyzed. To correct for this error, the PTE granules were manually replaced into the field by measuring their diameters and entering them into the database. The results showed differences in the starch size distributions between the classes of wheat evaluated, as well as the method of analysis. Four laser diffraction sizing (LDS) instruments were used to measure granule distributions of the four classes of wheat. LDS compared with IA resulted in a ≈40% underestimation of the A‐type granule diameter and a ≈50% underestimation of the B‐type granule diameter. A correction factor (adjustment) was developed from IA data to correct LDS analysis. LDS data correlations before adjustments to IA data were R² = 0.02^ns to 0.55***. After adjustment, these correlations improved to R² = 0.81*** to 0.93*** depending on the class of wheat starch evaluated.     

Diversity of Paenibacillus durus strains isolated from soil and different plant rhizospheres evaluated by ARDRA and gyrB-RFLP analysis

Strains belonging to Paenibacillus durus isolated from the rhizosphere of various grasses and from bulk soil were previously divided into five phenotypic groups (A1–A5) based on the fermentation pattern of six carbohydrates (A1: sorbitol (+), A2: dulcitol and tagatose (+), A3: starch and glycogen (+), A4: starch, glycogen and d-arabitol (+) and A5: negative for these carbohydrates). This study aimed to assess whether plant types select for specific P. durus phenotypic groups. For that purpose, polymerase chain reaction-restriction fragment length polymorphism analysis of part of genes encoding 16S rRNA (ARDRA) and DNA gyrase subunit B (gyrB-RFLP) were used to produce genetic fingerprints. ARDRA and gyrB-RFLP data were clustered together to generate a dendrogram and two main clusters were observed. Cluster I showed a predominance of strains isolated from wheat, maize and sugarcane rhizospheres. Strains isolated from maize were distributed among the five patterns of carbohydrate metabolism, while strains isolated from sugarcane showed to be predominantly able to metabolize starch and glycogen. Neither sorbitol- nor arabitol-metabolizing strains were found in cluster II, which consisted of strains isolated from soil and from all plant species used. Our results suggest that the plants influenced the diversity of P. durus in their rhizospheres.     

Size Distribution and Properties of Wheat Starch Granules in Relation to Crumb Grain Score of Pup‐Loaf Bread

Twelve hard winter wheat flours with protein contents of 11.8–13.6% (14% mb) were selected to investigate starch properties associated with the crumb grain score of experimentally baked pup‐loaf bread. The 12 flours were classified in four groups depending on the crumb grain scores, which ranged from 1 (questionable‐unsatisfactory) to 4 (satisfactory). Flours in groups 1, 2, 3, and 4 produced breads with pup‐loaf volumes of 910–1,035, 1,000–1,005, 950–1,025, and 955–1,010 cm³, respectively. Starches were isolated by a dough handwashing method and purified by washing to give 75–79% combined yield (dry flour basis) of prime (62–71%) and tailing (7–16%) starches. The prime starch was fractionated further into large A‐granules and small B‐granules by repeated sedimentation in aqueous slurry. All starches were assayed for weight percentage of B‐granules, swelling power (92.5°C), amylose content, and granular size distribution by quantitative digital image analysis. A positive linear correlation was found between the crumb grain scores and the A‐granule sizes (r = 0.65, P < 0.05), and a polynomial relationship (R² = 0.45, P < 0.05) occurred between the score and the weight percentage of B‐granule starch. The best crumb grain score was obtained when a flour had a weight percentage of B‐granules of 19.8–22.5%, shown by varietal effects.     

Role of Starch Granule Characteristics (volume fraction,rigidity, and fractal dimension) on Rheology of Starch Dispersions With and Without Amylose

The link between rheological behavior and morphological‐structural characteristics of gelatinized starch granules has been studied in two starch dispersions (SDs): a cross‐linked waxy maize (CLWM), and tapioca starch, a tuber starch with 19.3 % amylose. Based on the power law relationship between the elastic modulus and volume fraction of the granules predicted by scaling theory, fractal dimension values were obtained for CLWM starch D = 2.81, and tapioca starch D = 2.79, suggesting that both starch granules have highly convoluted surfaces. However, the preexponential coefficient (G′_⊘=1) for CLWM SDs was an order of magnitude greater than that for tapioca SDs, in the same range of volume fractions. The G′_⊘=1 was mainly dependent on the granule rigidity, and the amylose content in the continuous phase played only a minor role in the rheological behavior.     

Release of Bound Lipids in Cereal Starches Upon Hydrolysis by Glucoamylase

The raw starch granules from corn, rice, and wheat were hydrolyzed by practically pure glucoamylase (Rhizopus niveus). The bound lipids remaining in the residual starches were investigated, of which the major components of the lipids, free fatty acids (FFA) in corn starch, FFA and phospholipids (PL) in rice starch, and PL in wheat starch were determined. In each case, the bound FFA and PL were decreased to some extent during the initial stage of hydrolysis. During the later stages, the FFA continued to gradually decrease, while the level of PL stabilized. It was interesting that some of the bound lipids were released from the granules upon glucoamylase hydrolysis, differing from the model amylose-lipid complexes. Furthermore, the structures of the residual starches were investigated. The blue value and λ_max of the starches were increased by partial hydrolysis of the starch granules using practically pure glucoamylase. Two gel-permeation chromatography analyses revealed that the relative amount of amylose fraction was increased by glucoamylase hydrolysis, and also that the increments were reduced by the defatting of bound lipids. The results suggest that the increase in amylose fraction is attributable to the existence of bound lipids in the granules.     

Associations of Starch Gel Hardness,Granule Size,Waxy Allelic Expression,Thermal Pasting,Milling Quality,and Kernel Texture of 12 Soft Wheat Cultivars

Starches were isolated from 12 soft wheat (Triticum aestivum L.) cultivars and were characterized for waxy (Wx) allelic expression, thermal pasting characteristics, and starch granule size. Gels were produced from the thermally degraded starches and were evaluated using large deformation rheological measurements. Data were compared with cultivar kernel texture, milling characteristics, starch chemical analyses, and flour pasting characteristics. Larger flour yields were produced from cultivars that had larger starch granules. Flour yield also was correlated with lower amylose content and greater starch content. Harder starch gels were correlated with higher levels of amylose content and softer kernel texture. The cultivar Fillmore, which had a partial waxy mutation at the B locus, produced the highest peak pasting viscosity and the lowest gel hardness. Softer textured wheats had greater lipid‐complexed amylose and starch phosphorus contents and had less total starch content. Among these wheats of the soft market class, softer textured wheats had larger starch granules and harder textured wheats had smaller starch granules. In part, this may explain why soft wheats vary in texture. The smaller granules have larger surface area available for noncovalent bonding with the endosperm protein matrix and they also may pack more efficiently, producing harder endosperm.     

Enzymatic and Acidic Hydrolysis of Cationized Waxy Maize Starch Granules

A series of wet‐cationized starch granules from waxy maize with different degrees of substitution (DS) were solubilized with either 2.2M HCl (lintnerization) or with the α‐amylase of Bacillus amyloliquefaciens. The maximum rate of the enzymatic hydrolysis occurred in starches with intermediate DS. It appeared that the cationic substituents interfered with the binding to the active site of the enzyme at high levels of substitution. The DS remained fairly constant in the granular residues after the enzymatic attack. The rate of the acidic hydrolysis increased with increasing DS but the final level of solubilization slightly decreased. The DS of the residual starch material decreased to 40% of the original level, showing that a large part of the cationic groups was found within the amorphous parts of the granules. A dry‐cationized sample with a high DS was also treated with the acid and lost a major part of its substituents at low levels of lintnerization. Probably most of the substituents were associated with the surface and channels of these granules. The cationized starches possessed branches that were resistant to isoamylase attack and the samples also contained β‐amylolysis resistant dextrins. The proportion of resistant dextrins in the granular residues decreased after lintnerization, but remained constant after the enzymatic hydrolysis.     

The effect of elemental sulfur,gypsum and ammonium thiosulfate as sulfur sources on yield of rapeseed

Abstract

A growth chamber experiment was conducted to compare ammonium thiosulfate, gypsum and elemental sulfur in the form of Agrisul as sources of sulfur for rapeseed (Brassica napus var. Regent). Rapeseed supplied with ammonium thiosulfate or gypsum produced significantly higher yields than treatments supplied with elemental sulfur. Powdering and mixing of elemental sulfur, as opposed to banding granules, significantly increased dry matter yield of rapeseed. While not always significant, there was a trend towards higher dry matter yields where gypsum granules were mixed as opposed to banded and where ammonium thiosulfate was placed in a band as opposed to being mixed throughout the soil.     

Physical and Molecular Characterization of Millet Starches

This study investigated the physical and molecular starch characteristics of four Canadian‐grown millet species: pearl, foxtail, proso, and finger millet. The millet starch granules ranged from about 2.5 to 24 μm in size and were mainly polygonal with a few spherical ones. Their amylose contents ranged from 28.6 to 33.9%, with finger and pearl millets having much more of long amylose chains than short amylose chains compared with foxtail and proso millets. Starches also differed in the molecular structure of their branched amylose, with finger and pearl millets having longer glucan chains between branch points. The enthalpy of gelatinization of starch granules ranged from 11.8 to 13.2 J/g, and the enthalpy of melting of the retrograded starches ranged from 2.2 to 5.9 J/g. The onset temperature of gelatinization (T_o) of the starches ranged from 62.8 to 70.6°C. Addition of iodine vapor to the granular starches showed significant (P < 0.05) differences in the ratio of the absorbance to scattering coefficient (K/S) values, indicating differences in the rigidity of the glucan chains present in the granules. Starches with short amylose chains exhibited higher K/S values. Iodine vapor addition resulted in altered X‐ray diffractogram peak intensities. The study suggested differences in the structure and granular architecture of the millet starches.     

Morphological Changes of Granules of Different Starches by Surface Gelatinization with Calcium Chloride

Native starch granules of 11 selected cultivars (potato, waxy potato, sweet potato, normal maize, high‐amylose maize, waxy maize, wheat, normal barley, high‐amylose barley, waxy barley, and rice) were treated with a calcium chloride solution (4M) for surface gelatinization. The surface‐gelatinized starch granules were investigated using light microscopy and scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). In general, those starches with larger granule sizes required longer treatment time to complete the gelatinization. The salt solution treatment of starch was monitored by light microscopy and stopped when the outer layer of the granule was gelatinized. The surface gelatinized starch granules were studied using scanning electron microscopy. On the basis of the gelatinization pattern from calcium chloride treatments, the starches could be divided into three groups: 1) starches with evenly gelatinized granule surface, such as normal potato, waxy potato, sweet potato, maize, and high‐amylose maize; 2) starches with salt gelatinization concentrated on specific sites of the granule (i.e., equatorial groove), such as wheat, barley, and high‐amylose barley; and 3) starches that, after surface gelatinization, can no longer be separated to individual granules for SEM studies, such as waxy barley, waxy maize, and normal rice. The morphology of the surface gelatinized starch resembled that of enzyme‐hydrolyzed starch granules.     

Structural Characteristics of Steam-Flaked Sorghum

Sorghum undergoes structural changes during tempering, steam cooking, and flaking at various tempering moisture levels. Physical properties of flakes, digestibility, birefringence, scanning electron microscopy (SEM), and environmental SEM (ESEM) were used to evaluate the quality of steam-flaked sorghum from grain containing 11–23% water. As moisture levels increased, the flakes became stronger (57–69% whole flakes) and less dusty (9–4% fines). The diameter of the flakes varied among moisture levels, but preflake and final flake moisture contents increased as the temper level increased. Starch birefringence remained unchanged after tempering, and decreased only slightly after steam cooking; gelatinization occurred primarily during the flaking process. The steaming process prepared the grain for flaking by heating and softening the kernels. Tempering allowed extra water to penetrate inside the kernel endosperm. More starch granules had the opportunity to reach the glass transition temperature (T _g) during flaking. Based on subjective evaluation, birefringence, and SEM, poor quality flakes were opaque, chalky in appearance, and prone to high levels of breakage. The starch granules were more intact and less tightly packed into the flake. Good quality flakes were translucent, thin, and strong, with little chalkiness, and low levels of dust and fines. The dehydrated gelatinized starch continuous phase surrounding the granules reduced the amount of air spaces within the flake, increasing the translucency. ESEM inspection revealed that starch was more extensively gelatinized in the tempered samples. The starch granules were much larger in diameter, and the relative level of gelatinization, evident by the presence of starch granules with collapsed centers, was much higher.     

Starch Granule Size Distribution from Seven Wheat Cultivars Under Different Water Regimes

Seven wheat cultivars with different starch contents were used as materials to investigate the distribution of grain starch granule size under irrigated and rainfed conditions. In mature grains, the diameter of starch granules was 0.37–52.6 μm, and the percent volume distribution showed a two‐peak curve with the mean particle diameter of 5 (B‐type) and 25 μm (A‐type) at each peak. The volume percentages of A‐ and B‐types were 52.7–65.5% and 34.5–47.3%, respectively. A two‐peak curve is also shown in percent surface area distribution of starch granules, but only one peak in percent number. Both irrigated and rainfed conditions had a significant effect on the starch granule size distribution of the seven cultivars. As compared with irrigated treatment, rainfed treatment affected the distribution of starch granules in grains of all cultivars through increasing the volume percentage and surface area percentage of 2–9.8 and <9.8 μm starch granules and decreasing those of >9.8 and >18.8 μm starch granules. The soil water deficit also decreased the contents of amylose and starch in grains and increased protein content, indicating that different water regimes had an evident effect on grain quality. According to correlation coefficients (r), the contents of amylose, starch, and protein in grains was significantly correlated with the volume percentage of starch granules with different diameter ranges.     

Physical Changes of Mesona Blumes Gum/Starch Mixed Gel with Sugars

Mesona Blumes gum (MBG) is extracted from Mesona Blumes, which is an annual herb distributed throughout Southeast Asia and South China that has been used for medicinal functions in folk culture. More recently, it has been the focus of research for its potential food ingredient applications, such as meat binders. To evaluate the physical properties of these MBG/starch mixed gels with sugars, the viscographic viscosity, gel strength, elastic modulus, cold water solubility, water holding capacity, electronic conductivity, and pH were determined. Glucose had little influence on the physical properties of MBG/starch mixed gels, while sucrose could affect MBG/starch mixed gels to a large degree. It was concluded that various sugars played different roles in the formation of MBG/starch mixed gel. Amylographic viscosity, gel strength, and elastic modulus analysis, indicate that glucose could enhance the swelling of starch granules at concentrations of 0–75 mmol/L but at <25 mmol/L sucrose could facilitate the swelling of starch granules and beyond that it would inhibit the swelling of starch granules. SEM micrographs suggest that the MBG/starch system with glucose had more orderly and densely fibrous structures than the MBG/starch system with sucrose.     

Resistant Starch Content Is Related to Granule Size in Barley

Physical properties of resistant starch (RS) were examined in a range of barley genotypes to determine the contribution of starch and seed physical characteristics to the RS component. Thirty‐three barley genotypes were studied, which varied significantly in their RS, amylose, and starch contents and grain yield. From 33 genotypes, 13 exhibiting high RS were selected for detailed physicochemical analysis of starch. In high‐RS varieties, granule size and number were unimodal, compared with normal starches from a reference genotype, which showed a bimodal distribution. Principal component analysis (PCA) showed that a higher content of granules <15 µm was positively correlated with RS and amylose content, whereas the proportion of granules 15–45 µm was negatively correlated with the RS and amylose contents. Physical fractionation of starches by centrifugation into different population sizes demonstrated that size alone is not an accurate indicator of the population of A‐type and B‐type granules within a given genotype. PCA also showed that large 15–45 µm granules were positively correlated with seed thickness and that thousand grain weight was positively correlated with seed width. High‐RS and high‐amylose genotypes showed variation in overall yield and starch content, with some genotypes showing yield comparable to the reference genotype. Analysis of amylopectin chain length distribution showed that high amylose or RS content was not associated with a higher proportion of amylopectin long chains when compared with either waxy or reference (normal) barley genotypes. This study highlights useful markers for screening barley genotypes with favorable starch characteristics.     

Effects of Transglutaminase on Rheology,Microstructure, and Baking Properties of Frozen Dough

The improving effects of transglutaminase (TGase) were investigated on the frozen dough system and its breadmaking quality. Rheological properties and microstructure of fresh and frozen doughs were measured using a Rapid Visco‐Analyser (RVA), dynamic rheometer, and scanning electron microscopy (SEM). The frozen doughs with three storage periods (1, 3, and 5 weeks at –18°C) were studied at three levels (0.5, 1.0, and 1.5%) of TGase. As the amount of TGase increased, hot pasting peak viscosity and final viscosity from the RVA decreased, but breakdown value increased. The TGase content showed a positive correlation with both storage modulus G′ (elastic modulus) and the loss modulus G″ (viscous modulus): G′ was higher than G″ at any given frequency. The SEM micrographs showed that TGase strengthened the gluten network of fresh, unfrozen dough. After five weeks of frozen storage at –18°C, the gluten structure in the control dough appeared less continuous, more disrupted, and separated from the starch granules, while the dough containing 0.5% TGase showed less fractured gluten network. Addition of TGase increased specific volume of bread significantly (P < 0.05) with softer bread texture. Even after the five weeks of frozen storage, bread volume from dough with 1.5% TGase was similar to that of the fresh control bread (P < 0.05). The improving effects of TGase on frozen dough were likely the result of the ability of TGase to polymerize proteins to stabilize the gluten structure embedded by starch granules in frozen doughs.     

Factors Governing Pasting Properties of Waxy Wheat Flours

Waxy wheat (Triticum aestivum L.) contains endosperm starch lacking in amylose. To realize the full potential of waxy wheat, the pasting properties of hard waxy wheat flours as well as factors governing the pasting properties were investigated and compared with normal and partial waxy wheat flours. Starches isolated from six hard waxy wheat flours had similar pasting properties, yet their corresponding flours had very different pasting properties. The differences in pasting properties were narrowed after endogenous α‐amylase activity in waxy wheat flours was inhibited by silver nitrate. Upon treatment with protease, the extent of protein digestibility influenced the viscosity profile in waxy wheat flours. Waxy wheat starch granules swelled extensively when heated in water and exhibited a high peak viscosity, but they fragmented at high temperatures, resulting in more rapid breakdown in viscosity. The extensively swelled and fragmented waxy wheat starch granules were more susceptible to α‐amylase degradation than normal wheat starch. A combination of endogenous α‐amylase activity and protein matrix contributed to a large variation in pasting properties of waxy wheat flours.