Effect of feed rate and drill speed on temperatures in equine cortical bone.

OBJECTIVE: To examine the amount of heat generated in equine cortical bone by a 6.2-mm drill, using low- and high-speed and controlled feed rate drilling. SAMPLE POPULATION: 10 metacarpal bones harvested from five 2-year-old draft-type horses. PROCEDURE: Drilling on metacarpal bones was done using a machine shop mill with which the feed rate and drill speed could be precisely controlled. Bones were drilled, using 6 combinations of feed rate (1, 2, and 3 mm advance/s) and drill speed (317 and 1,242 revolutions/min [rpm], with maximal temperatures recorded by thermocouples placed 1, 1.5, and 2 mm from the drill. Maximal temperatures were evaluated for the effect of feed rate, drill speed, cortical thickness, and distance from the drill, using linear regression analysis. RESULTS: Increasing feed rate from 1 to 2 and from 2 to 3 mm/s significantly decreased mean maximal temperature. Increasing drill speed from 317 to 1242 rpm significantly increased mean maximal temperature. Increasing cortical thickness significantly increased mean maximal temperature, and increasing the distance from the drill hole significantly decreased mean maximal temperatures. CONCLUSIONS: On the basis of our results, we recommend using low drill speeds while applying sufficient axial force to advance the drill as rapidly as possible through the bone. CLINICAL RELEVANCE: Results of using this in vitro model suggest that temperatures at the drill-bone interface may be sufficiently high to result in significant thermal necrosis when drilling equine cortical bone.     

Comparison of Three Drilling Techniques for Carpometacarpal Joint Arthrodesis in Horses

Objective: To evaluate 3 drilling techniques for arthrodesis of the equine carpometacarpal (CMC) joint. Study Design: Experimental study. Sample Population: Cadaveric equine forelimbs (n=15). Methods: Limbs were divided into 3 groups (5 limbs each) to evaluate 3 drilling techniques: (1) use of a 4.5 mm drill bit inserted into the joint through 4 entry points and moved in a fanning motion; (2) a 5.5 mm drill bit inserted through 2 entry points to create 3 nonfanned drill tracts (3 drill technique); and (3) a 4.5 mm drill bit used in a 3 drill technique. The CMC joint was disarticulated after drilling, and cartilage and subchondral bone damage evaluated visually and by gross and microradiographic examination using planimetry. Results: Technique 1 produced significantly more damage of the proximal surface, but significantly less to the subchondral bone of the distal surface. Technique 1 produced the most damage to both the articular cartilage and subchondral bone of the total CMC joint than either of the 3 drill tract techniques; however, the difference between techniques 1 and 2 was not significant. Damage from technique 3 was significantly less than that with techniques 1 or 2. Conclusions: Techniques 1 and 2 produced the most cartilage and subchondral bone damage with technique 2 changes more equally distributed between proximal and distal joint surfaces. Clinical Relevance: Technique 1 (fanning) and 2 (5.5 mm 3 drill tracts) may be preferable to achieve arthrodesis of the CMC joint. Morbidity and efficacy of these arthrodesis techniques need to be evaluated in vivo.     

Effects of clustered drill holes on the breaking strength of the equine third metacarpal bone

The breaking strength (stress at failure) of equine third metacarpal bones, with and without clustered drill holes, was determined in vitro. Paired ossa metacarpalia II-IV of 39 horses (n = 39) between 2 and 7 years old were tested in palmarodorsal 3-point bending. Four treatments were compared. Clustered 2.7- or 3.5-mm drill holes, in a 4- or 7-hole pattern, were made in the dorsal cortex of the distal diaphysis of the left third metacarpal bone. Undrilled right third metacarpi were used as controls. Bones with clustered drill holes failed by an oblique fracture through 1 or more drill holes, whereas undrilled bones failed with a middiaphyseal transverse fracture. Clustered drill holes acted as a stress concentrator and significantly (P less than 0.05) decreased the stress required for failure. However, differences in breaking strength between treatment groups were not significant (P greater than 0.05).     

Effect of subchondral drilling on repair of partial-thickness cartilage defects of third carpal bones in horses

Arthrotomies of middle carpal joints were done on 13 horses, and a 1-cm partial thickness, round defect was made on the radial facet of both third carpal bones. In one joint, 1-mm diameter 1-cm deep holes were drilled within the defect, and one joint was used as a control. horses were assigned to 2 groups--group 1 (n = 6 horses), 5 drill holes; group 2 (n = 7 horses), 11 drill holes. At 1 and 3 weeks after surgery, differences between joints in synovial fluid total protein values, WBC counts, or results of mucin precipitate tests were not significant (P = 0.005). Physically and radiographically, horses were the same during the 12 initial weeks they were housed in stalls and the 9 weeks they were kept in paddocks. Twenty-one weeks after surgery, horses were euthanatized. Joints with drill holes had a significantly greater area (P less than 0.05) of healthy fibrocartilage new tissue: group 1-33 to 68% new tissue, compared with 0 to 23% new tissue in controls; and group 2-22 to 64% new tissue, compared with 0 to 37% new tissue in controls. Differences between healing of defects with drill holes in groups 1 and 2 were not significant. Thickness of new tissue over drill holes was 33 to 61% of thickness of cartilage adjacent to the defect, and thickness of tissue between drill holes was 11 to 43% (group 1) and 8 to 79% (group 2) of the thickness of cartilage adjacent to the defect.(ABSTRACT TRUNCATED AT 250 WORDS)     

Disturbance to Surface Lithic Components of Archaeological Sites by Drill Seeding

Federally funded range improvement treatments in the United States require that land managers consider the treatment’s impacts to archaeological sites. Pending archaeological clearance can result in the postponement or exclusion of effective seeding practices, which in turn can result in poor seed establishment, increased weeds, recurrent fire, accelerated soil erosion, and damage to cultural sites. Less intensive requirements would help relieve time restrictions, but less-conspicuous sites might be missed. We quantified the displacement and damage that lithic artifacts would incur if missed in an inventory and subsequently subjected to drill seeding treatments. We subjected chert, quartzite, and obsidian materials to impact by a rangeland drill and a no-till drill on sandy and silty soils. Soil texture was the most important factor in perpendicular lithic movement. In the silty soil, lithics were displaced perpendicular to the direction of the drill nearly twice as far as in the sandy soil (7.8 cm ± 0.9 SE vs. 4.1 cm ± 0.6 SE, P < 0.01). No experimental factor showed a difference in absolute displacement (mean = 15 cm). Damage to lithics was infrequent (25%) and minor with no experimental factor showing statistical significance. Approximately 30% of lithics were buried by treatments. In the sandy soil, the rangeland drill buried lithics 6.5 mm ± 1.6 SE deep, on average, which was twice as deep as the no-till drill in the sandy soil (3.0 mm ± 0.9 SE) and four times as deep as both drills in the silty soil (1.5 mm ± 0.5 SE; P = 0.03). Minimal effects of drill seeding on lithics suggest that drill seeding could proceed with less-intensive archaeological surveys.     

Sacroiliac Luxation in the Cat: Defining a Safe Corridor in the Dorsoventral Plane for Screw Insertion in Lag Fashion

Objective— To define a safe corridor in the dorsoventral plane within the feline sacral body for placement of screws inserted in lag fashion for repair of sacroiliac luxation.
Study Design— Anatomic study.
Sample Population— Frozen cadaveric feline sacra.
Methods— Feline sacra (n=20) were used to perform a radiographic study to define a safe corridor to a depth of 66% of the sacral body width. Two drill start points (A and B) were evaluated. Dorsal exit from the safe corridor was considered unacceptable.
Results— Forty safe corridors were measured. The mean articular surface was 100±6.4° from horizontal. Mean maximum, optimum, and minimum safe corridor drill angles from drill point A were 107±6.8°, 97±6.9°, and 87±7.2°, respectively, from the articular surface. Mean maximum, optimum, and minimum angles from drill point B were 109±7.2°, 99±7.1°, and 89.5±7.2°, respectively. Point B increased the risk of ventral exit from the sacral body.
Conclusions— Point A and a drill angle of 90±4° for drilling of the feline sacral body is recommended. This margin for error risks ventral exit from the body in 23/40 (58%) of the sacra in this study. Reduction of the margin for error to ±2° would reduce the risk of ventral exit to 14/40 (35%) of the sacra in this study.
Clinical Relevance— Drilling at 90° to the feline sacral articular surface is recommended. Findings from this study present a strong case for use of angled drill guides.     

Risk factors for fibular fracture after TPLO

Objective: To determine (1) risk factors for fibular fracture after tibial plateau leveling osteotomy (TPLO) and (2) if a single postoperative radiographic measurement or measurement ratio of the proximal tibial fragment can be used as a predictor for fibular fracture. Study Design: Multivariate retrospective clinical study. Animals: Dogs (n=326) with cranial cruciate ligament rupture that had TPLO (n=355). Methods: Medical records (January 2004–November 2007) and radiographs of dogs that had TPLO were reviewed. TPLO plate type, distance between tibial plateau and proximal screw, proximodistal tibial plateau fragment length, tibial plateau width, the presence of a fibular drill hole filled with a screw or not, and fibular fractures were recorded. Results: The odds of having a fibular fracture were 10 times greater in dogs with a fibular drill hole than in dogs without a drill hole. The odds of having a fibular fracture were 1.46 times greater for every 4.5 kg increase in body weight. Tibial plateau angle (TPA) at the time of reevaluation was larger than the postoperative TPA and TPA increase was larger in dogs with fibular drill holes than without (P<.01) and in dogs with fibular fractures than without (P<.01). Conclusion: An unfilled fibular drill hole and increased body weight are risk factors for fibular fracture.     

Cheatgrass Invasion in Salt Desert Shrublands: Benefits of Postfire Reclamation

In 1998, fires burned more than 11 330 ha of rangeland on Dugway Proving Ground in Utah's west desert. Postfire revegetation was implemented in 2 affected salt desert shrub communities (greasewood; Sarcobatus vermiculatus Hook. and black sagebrush/shadscale; Artemisia nova A. Nels; Atriplex confertifolia Torr. & Frem.) to deter cheatgrass (Bromus tectorum L.) encroachment. We monitored cheatgrass densities for 3 years after the fire in burned drill seeded, burned not-seeded, and unburned plots to assess the rate of invasion and determine the impact on cheatgrass of drill seeding perennial species. Cheatgrass invaded quickly in both shrub sites following the fires. In the greasewood site, drill seeded species germinated but did not establish. This was likely due to a combination of soil salinity and extremely dry weather conditions during the second year of the study. Drill seeded species in the black sagebrush site germinated and established well, resulting in the establishment of 16.5 perennial grasses · m^-2 and 1 356 shrubs · ha^-1. Cheatgrass densities were consistently lower in drill seeded versus not-seeded plots, although these were not always statistically different when Bonferroni comparisons were considered. The initial decrease in cheatgrass densities in drill seeded plots may have resulted from soil disturbance coupled with extremely low precipitation rather than competitive effects. Nevertheless, as seeded species mature and increase their competitive ability, we predict long-term suppression of cheatgrass in the absence of further disturbance.     

Stabilization of Bilateral Sacroiliac Fracture-Luxations in Small Animals with a Single Transsacral Screw

Bilateral sacroiliac fracture-luxations in four dogs and four cats weighing 3.5 kg to 30.9 kg were reduced and stabilized with a single 3.5 mm, 4.5 mm, or 6.5 mm transsacral screw. Alignment of the drill bit was visual in six cases and assisted by the use of an aiming device in two cases. Seven animals were reevaluated at months 3 to 6. No significant screw loosening or loss of reduction had occurred. Although no intraoperative complications were encountered with visual drill bit alignment, use of an aiming device for transsacral drilling is strongly recommended.     

Canine sacroiliac luxation: anatomic study of dorsoventral articular surface angulation and safe corridor for placement of screws used for lag fixation

OBJECTIVE: To define a safe corridor in the dorsoventral plane to facilitate placement of screws inserted in lag fashion within the sacral body for fixation of sacroiliac fracture-luxation injuries in dogs. STUDY DESIGN: Anatomic study. SAMPLE POPULATION: Cadaveric canine sacra. METHODS: Canine sacra (n=45) were used for a radiographic study to define a safe corridor in the dorsoventral plane for placement of screws inserted in lag fashion for fixation of sacroiliac luxation in the dog. The defined safe corridor allowed drilling to a depth of 65% of the sacral width to ensure screw purchase of > or =60%. Effects of positioning and measurement techniques were evaluated. RESULTS: Eighty-seven safe corridors were measured. The mean articular surface was 100+/-4.52 degrees from horizontal. Mean maximum, optimum, and minimum safe corridor drill angles were 111+/- 4.57 degrees, 100+/-4.70 degrees, and 89+/-5.17 degrees, respectively, from the articular surface. Predicted surgeon error of +/-4 degrees was used to define the safe corridor for use clinically. CONCLUSIONS: In 91% of sacra, a drill angle of 100+/-4 degrees would remain ventral to the vertebral canal. Twelve sacra (14%) were at risk of penetration of the pelvic canal. A drill angle of 97+/-4 degrees avoids penetration of the vertebral canal in all sacra measured but risks ventral exit from the body in 30% of sacra studied. CLINICAL RELEVANCE: A drill angle of 97 degrees from the articular surface is recommended for insertion of screws for lag fixation of canine sacroiliac luxation.     

不同土壤不同种植方式普那菊苣的产量分析

在砂土、粘土、壤土3种不同的土壤上以穴播、条播、撒播和育苗移栽4种种植方式种植黔引普那菊苣Cichorium intybus cv.Puna,测定其鲜草产量和再生速度。结果表明：黔引普那菊苣在各种不同质地土壤上采用各种种植方式均有较高的产量。在同质地土壤上,鲜草产量以条播为最高,穴播次之,育苗移栽产量最低。同一播种方式以在壤土上的产量为最高,砂土次之,粘土最低。再生速度在不同处理之间差异均不显著。黔引普那菊苣适宜在各种土壤上种植,但以在土壤肥沃的壤土上种植产量较高,条播、穴播为推广的种植方式。     

Effect of compound of gelatin hydrogel microsphere incorporated with platelet-rich-plasma and alginate on sole defect in cattle

Platelet-rich plasma (PRP) was administered to cattle with hoof defects (10-mm drill hole) to promote sole defect healing. Two types of gels were prepared. One was a mixed gel [compound of gelatin microspheres (GM) incorporated with PRP and alginate] and was used for the test group, while the other was an alginate gel used for the control group. Each hole was filled with one of these gels. The drill hole depth, pressure pain, and hardness of the regenerated tissue were measured for 3 weeks after treatment. These measurements improved significantly in the test group than in the control group. The results suggest that a compound of GM incorporated with PRP and alginate had a hoof-regenerating effect in cattle.     

Canine sacroiliac luxation: anatomic study of the craniocaudal articular surface angulation of the sacrum to define a safe corridor in the dorsal plane for placement of screws used for fixation in lag fashion

Objective: To define a safe corridor in the dorsal plane relative to the articular surface for placement of a single screw in lag fashion to achieve stabilization of sacroiliac luxation in the dog. Study Design: Cadaveric study. Methods: Dorsoventral radiographs of denuded canine sacra (n=49) were taken to determine the safe corridor in the craniocaudal plane, and the maximum, optimum and minimum angles were calculated that would allow a screw inserted in lag fashion to engage at least 60% of the width of the sacral body without cranial or caudal penetration through the bone. Results: The mean safe corridor in the dorsal plane is ～24° wide. Mean craniocaudal minimum, optimum and maximum drill angles from the drill start point were 88°, 100°, and 111° from the articular surface, respectively. No single angle will completely avoid risk of screw penetration beyond the safe corridor cranially and caudally. Conclusions: There is sufficient anatomic variation between different canine sacra that a single angle cannot be recommended for screw placement in the dorsal plane. Clinical Relevance: A standard angle cannot be recommended for screw placement in lag fashion within the canine sacrum in the dorsal plane. Because of the narrow width of the safe corridor, preoperative measurements on radiographs are recommended and a range of angled drill guides may be useful to decrease surgeon margin of error.     

Acid-base equilibrium values in the blood of dogs during training and work stress

Separate components of acid-base balance in blood (ABR)-pH, pCO2, BE, SB, BB-were studied during the long-term drill of service dogs of two age categories. These service dogs were included in two different work strain groups (patrol dogs and searching dogs). The results of long-term drill demonstrated, in particular, significant changes in dynamics of pH and pCO2. The pH values were permanently raised as compared with reduced pCO2 values during the whole period of 130-days exercise and as compared with the initial values. Other components of acid-base balance in blood do not show such variations (patrol and searching dogs) and these components justify that the adaptation of organism to the given strain gained suitable stabilisation. For studying the psychical and physical strain in service dogs it is recommended to include pH and pCO2 in the tests.     

Comparison of two grafting methods in 4.0-mm drill defects in the third metacarpal bone of horses.

In 6 horses, bilateral metacarpal vertical series of three 4.0-mm unicortical drill holes were made. At random, one of each series of 3 holes was filled using a sternal 4.0-mm cancellous bone cylinder or a slurry of cancellous bone injected into the hole or left as an empty control. All horses had lateral metacarpal xeroradiographs at monthly intervals. Three horses (6 metacarpi) were examined post mortem after 4 months and 3 others after 6 months. Immediate through 4-month post-operative xeroradiographs demonstrated increased density in the holes with cancellous cylinders and no difference could be seen between the untreated controls and holes injected with slurry. From 5 months, no radiographic difference could be seen between the treatment groups. No consistent histological difference between treatment groups could be detected. In conclusion, no justification for clinical grafting of 4.0-mm unicortical dorsal metacarpal drill holes could be found.     

Galvanic corrosion due to stainless steel implants of differing composition in a dog

The occurrence of galvanic corrosion between a broken stainless steel drill bit and an adjacent stainless steel screw is described. These apparently similar metals are shown by metallurgical analysis to be significantly different and to be capable of inducing electrolysis.     

Fatal venous air embolism in a cat undergoing dental extractions

A five‐year‐old domestic shorthair cat underwent general anaesthesia and tooth extractions. Immediately after use of a high‐speed, air‐driven, water‐cooled dental drill, the cat suffered cardiac arrest and attempted resuscitation was unsuccessful. Post‐mortem radiographs showed air in the vena cava, right atrium, right auricle and right ventricle, hepatic and renal veins. These findings were confirmed at post‐mortem examination. The cause of death was massive air embolism. There are reports of fatal venous air embolism in the human literature from the use of high‐speed, air‐driven, water‐cooled dental drills. In this case, we believe that the air jet from the cooling system provided an enormous pressure gradient allowing air entry through an alveolar bone fracture or the inflamed gingival tissues. This is the first report of fatal venous air embolism associated with the use of a high‐speed dental drill in the veterinary literature.     

Holding power of cortical screws after power tapping and hand tapping.

Paired equine third metacarpal bones were drilled and tapped for 4.5 mm and 5.5 mm cortical screws. Tapping was done by hand or with an air-driven reversible orthopedic drill. Screws were inserted and subjected to extraction forces to failure of the osseous threads or the screws. There was no difference in holding power of either screw size between hand-tapped and power-tapped holes.     

Investigation about the clinical use of brushite- and hydroxylapatite-cement in sheep

For future clinical use as synthetic bone replacement, an injectable brushite-(chronOS-Inject) and hydroxylapatite-(Biobon) cement were compared in a drill hole model in 10 sheep over time at 2, 4, 6, 8, 16 and 24 weeks. Results were compared regarding their practical use, biocompatibiliy, resorption mechanism and subsequent new bone formation. The cements were filled into drill holes (psi 8 x 13mm) of the proximal and distal humerus, and femur and the samples evaluated macroscopically, radiologically and microscopically including histomorphometrical quantification of percentages of new bone, fibrous tissue and remnants of cements. The cement area decreased continuously from 2 to 24 weeks with chronOS-Inject, as well as the area of granules. Inversely, the subsequent new bone formation increased from 2-24 weeks accordingly. With Biobon the cement area decreased slower between 2 and 24 weeks, and the new bone formation was less. Both cements were well integrated into the bone in long bones. chronOS-Inject demonstrated good biocompatibility and was almost completely replaced through bone within 24 weeks. Biobon was resorbed considerably slower and initially a slight inflammatory reaction including bone resorption was observed within the adjacent host bone.     

Tension band wiring of canine and feline supracondylar epiphyseal femoral fractures (author's transl)

The present investigation describes the treatment of 27 cases of canine and feline supracondylar epiphyseal--metaphyseal femoral fractures with tension band wire. The wire was passed through transversal parallell drill holes, one in each fragment. The wires intercrossed dorsally. Stable fixation followed tightening of the wires. 20 out of 25 primarily successful cases were re-examined. 19 were completely well. One case showed a slight transient lameness following hard exercise.