The feasibility of remotely sensed data to estimate urban tree dimensions and biomass

Accurately measuring the biophysical dimensions of urban trees, such as crown diameter, stem diameter, height, and biomass, is essential for quantifying their collective benefits as an urban forest. However, the cost of directly measuring thousands or millions of individual trees through field surveys can be prohibitive. Supplementing field surveys with remotely sensed data can reduce costs if measurements derived from remotely sensed data are accurate. This study identifies and measures the errors incurred in estimating key tree dimensions from two types of remotely sensed data: high-resolution aerial imagery and LiDAR (Light Detection and Ranging). Using Sacramento, CA, as the study site, we obtained field-measured dimensions of 20 predominant species of street trees, including 30–60 randomly selected trees of each species. For each of the 802 trees crown diameter was estimated from the aerial photo and compared with the field-measured crown diameter. Three curve-fitting equations were tested using field measurements to derive diameter at breast height (DBH) (r² = 0.883, RMSE = 10.32 cm) from the crown diameter. The accuracy of tree height extracted from the LiDAR-based surface model was compared with the field-measured height (RMSE = 1.64 m). We found that the DBH and tree height extracted from the remotely sensed data were lower than their respective field-measured values without adjustment. The magnitude of differences in these measures tended to be larger for smaller-stature trees than for larger stature species. Using DBH and tree height calculated from remotely sensed data, aboveground biomass (r² = 0.881, RMSE = 799.2 kg) was calculated for individual tree and compared with results from field-measured DBH and height. We present guidelines for identifying potential errors in each step of data processing. These findings inform the development of procedures for monitoring tree growth with remote sensing and for calculating single tree level carbon storage using DBH from crown diameter and tree height in the urban forest.     

Mapping of urban roadside trees – A case study in the tree register update process in Helsinki City

This case study describes a method for utilizing leaf-off airborne laser scanning (ALS) data for mapping characteristics of urban trees. ALS data were utilized to detect and update all street trees in the tree inventory of the City of Helsinki, Finland. The inventory consists of roughly 20,000 street trees with mean diameter at breast height (DBH) of 24 cm and mean height of 10.6 m. The large number of trees makes the manual updating process very laborious. The automatic mapping procedure presented in this paper detected 88.8% of all trees in the inventory. Tree height was predicted with root mean square error (RMSE) of 1.27 meters and tree DBH with RMSE of 6.9 cm. The presented method provides a practical and cost–effective tool for the mapping of urban tree characteristics. The cost–efficiency was further enhanced because the used ALS data were originally collected for other urban planning purposes.     

Stemflow chemistry in relation to tree size: A preliminary investigation of eleven urban park trees in British Columbia,Canada

Given increased atmospheric loads in cities, quantification of stemflow chemistry is necessary for a holistic understanding of elemental cycling in urban ecosystems. Accordingly, the stemflow volume and associated solute fluxes (K⁺, Ca²⁺, Na⁺, Mg²⁺) were measured for eleven deciduous trees in a manicured park setting in Kamloops, British Columbia, Canada. Over nine rainfall events from late June to early September 2013, larger trees [diameter at breast height (DBH) > 30 cm] were found to generally produce higher event stemflow volumes but lower funneling ratios than the smaller trees (DBH < 30 cm). The median flux-based enrichment ratio, which compares the solute input of stemflow to that of rainfall on a per unit trunk basal area, also tended to be greater for smaller trees than larger ones. Under all-tree and single-leader tree conditions, significant negative non-linear relationships between tree DBH and mean flux-based enrichment ratios were found for Ca²⁺, Na⁺, and Mg²⁺, but not for K⁺. These preliminary results indicate that urban trees can considerably enrich rainfall that is partitioned into stemflow, and that ion concentrations and enrichment ratios exhibit notably high interspecific variability. In this study, tree size and presence of single versus multiple leaders explained some of this heterogeneity; however, further study into those physical tree characteristics that affect stemflow volume and stemflow chemistry must be carried out if the impact and challenges of urban greening, nutrient cycling, and stormwater management initiatives are to be more fully understood.     

The overlooked carbon loss due to decayed wood in urban trees

Decayed wood is a common issue in urban trees that deteriorates tree vitality over time, yet its effect on biomass yield therefore stored carbon has been overlooked. We mapped the occurrence and calculated the extent of decayed wood in standing Ulmus procera, Platanus × acerifolia and Corymbia maculata trees. The main stem of 43 trees was measured every metre from the ground to the top by two skilled arborists. All trees were micro-drilled in two to four axes at three points along the stem (0.3 m, 1.3 m, 2.3 m), and at the tree’s live crown. A total of 300 drilling profiles were assessed for decay. Simple linear regression analysis tested the correlation of decayed wood (cm²) against a vitality index and stem DBH. Decay was more frequent and extensive in U. procera, than P. acerifolia and least in C. maculata. Decay was found to be distributed in three different ways in the three different genera. For U. procera, decay did appear to be distributed as a column from the base to the live crown; whereas, decay was distributed as a cone-shape in P. acerifolia and was less likely to be located beyond 2.3 m. In C. maculata decay was distributed as pockets of variable shape and size. The vitality index showed a weak but not significant correlation with the proportion of decayed wood for P. acerifolia and C. maculata but not for U. procera. However, in U. procera, a strong and significant relationship was found between DBH and stem volume loss (R² = 0.8006, P = 0.0046, n = 15). The actual volume loss ranged from 0.17 to 0.75 m³, equivalent to 5%–25% of the stem volume. The carbon loss due to decayed wood for all species ranged between 69–110 kg per tree. Based on model’s calculation, the stem volume of U. procera trees with DBH ≥ 40 cm needs to be discounted by a factor of 13% due to decayed wood regardless of the vitality index. Decayed wood reduces significantly the tree’s standing volume and needs to be considered to better assess the carbon storage potential of urban forests.     

Non-destructive method for above-ground biomass estimation of Fraxinus uhdei (Wenz.) Lingelsh in an urban forest

One of the limiting factors to estimate accurately the biomass stocks of urban forests is the availability of allometric models developed from urban trees measurements. In addition, the traditional methods (destructive) to develop biomass equations are rarely applied in cities. The aim of this study was to develop a non-destructive method based on fractal analysis for trees of Fraxinus uhdei present in the green areas of Chapultepec Park in Mexico City. Diameter at breast height (DBH), total height and the height of the whorls of 46 randomly-selected trees were measured. In each tree, three different-order branches were collected to measure their total length and that of their links, the diameter before and after each branching point, the insertion angle, the number of branches, twigs and leaves, and fresh and dry weight. The felling of seven individuals at the site was taken advantage of to fit a taper function for the trunk and determine its biomass. Acceptable estimates with good accuracy were obtained for F. uhdei trees with a DBH of less than 23 cm. It is feasible to develop biomass models from measuring the branches and the trunk of young F. uhdei trees through the implementation of structural indices based on fractal geometry and without the need to fell healthy trees.     

Allometric equations for estimating the aboveground volume of five common urban street tree species in Daegu,Korea

Quantifying urban tree biomass and carbon (C) storage by using allometric equations is required for various studies such as assessing the inventory, modelling, and measuring ecosystem services of urban trees. However, the lack of urban-specific allometric equations leads to uncertainty when estimating urban tree biomass and C storage. Therefore, we followed a nondestructive approach and developed allometric equations specifically for Acer buergerianum Miq., Ginkgo biloba L., Platanus orientalis L., Prunus yedoensis Matsum., and Zelkova serrata (Thunb.) Makino in Daegu, Korea. Diameter at breast height (DBH)-based and DBH-and-height-based allometric equations were highly accurate at estimating the aboveground volume (R² > 0.92), while the allometric equations for P. orientalis and Z. serrata developed for traditional forests overestimated volume by 68% and 427%, respectively. The addition of a height variable into the DBH-based allometric equations did not increase the reliability of the allometric equations at a local level. The mean aboveground C storage of urban street trees was 24.9 Mg C/ha except for P. orientalis with a mean of 69.7 Mg C/ha, and the total aboveground C storage of urban street trees in Daegu was 10.6 Gg C. Alternatively, a generalized allometric equation which compiled species-specific equations can be applied for large-scale estimation. The generalized equations developed in this study and those found in the literature may suggest a constant value (～2.3–2.4) for the scaling exponent in the generalized equations. Allometric equations developed from natural or artificial stands may overestimate the volume of urban street trees; therefore, estimating urban tree biomass and C storage requires urban-specific allometric equations.     

Assessing the performance of urban forest carbon sequestration models using direct measurements of tree growth

Across cities worldwide, people are recognizing the value of greenspace in ameliorating the health and well-being of those living there, and are investing significant resources to improve their greenspace. Although models have been developed to allow the quantification of ecosystem services provided by urban trees, refinement and calibration of these models with more accurate site- and species-specific data can increase confidence in their outcomes. We used data from two street tree surveys in Cambridge, MA, to estimate annual tree mortality for 592 trees and diameter growth rates for 498 trees. Overall tree turnover between 2012 and 2015 was relatively low (annualized 3.6% y⁻¹), and mortality rate varied by species. Tree growth rates also varied by species and size. We used stem diameter (DBH) and species identity to estimate CO₂ sequestration rates for each of 463 trees using three different model variations: (1) i-Tree Streets, (2) Urban Tree Database (UTD) species-specific biomass allometries and growth rates, and (3) empirically measured growth rates combined with UTD biomass allometries (Empirical + UTD). For most species, the rate of CO₂ sequestration varied significantly with the model used. CO₂ sequestration estimates calculated using i-Tree Streets were often higher than estimates calculated with the UTD equations. CO₂ sequestration estimates were often the lowest when calculated using empirical tree growth estimates and the UTD equations (Empirical + UTD). The differences among CO₂ sequestration estimates were highest for large trees. When scaled up to the entire city, CO₂ sequestration estimates for the Empirical + UTD model were 49.2% and 56.5% of the i-Tree Streets and UTD estimates, respectively. We suggest future derivations of ecosystem service provision models allow localities to input their own species-specific growth values. By adding capacity to easy-to-use tools, such as i-Tree Streets, we can increase confidence in the model output.     

Can pruning help maintain vitality of ash trees affected by ash dieback in urban landscapes?

Hymenoscyphus fraxineus causes a destructive invasive tree disease known as ash dieback threatening the survival of common ash not only in the forests, but also in urban and landscape settings. Pruning is a potential management practice that could help maintain tree vitality and aesthetics in parks, gardens, alleys and recreation areas, as well as maintaining veteran trees having high heritage or cultural value, or trees with high genetic importance (e.g. located in clonal seed orchards). In this study we investigated the maximum distance proximal to the lesion margin at which H. fraxineus can be detected on individual branches infected by the fungus in order to provide recommendations for pruning. Pruning of branches was carried out on 38 trees in southern Sweden. Tissue samples including bark and wood were collected from the margin of the lesion and at 5 cm intervals proximal to the lesion. Molecular analysis revealed presence of H. fraxineus in 91.3% of the investigated lesions. The proportion of lesions at which H. fraxineus could be detected declined with increasing distance from the lesion margin, with a significant reduction in the number of positive samples at 10 cm proximal to the margin. At 30 cm from the lesion edge the pathogen was never detected. Our results suggest that routine pruning may help maintain the vitality of younger trees. Pruning branches at least 35 cm from visible, active lesions in the bark should exclude the fungus and therefore reduce the probability of stem infection by H. fraxineus, however this cultural control tactic may only be economically feasible for high value amenity trees.     

Defect-disorder and risk assessment of heritage trees in urban Hong Kong

Heritage trees in a city, echoing factors conducive to outstanding performance, deserve special care and conservation. To understand their structural and health conditions in urban Hong Kong, 30 defect-disorder (DD) symptoms (physical and physiological) subsumed under four tree-position groups (soil-root, trunk, branching, and crown-foliage) and tree hazard rating were evaluated. The surveyed 352 trees included 70 species; 14 species with 233 trees were native. More trees had medium height (10–15 m), medium DBH (1–1.5 m) and large crown (>15 m). In ten habitats, public park and garden (PPG) accommodated the most trees, and roadside traffic island (RTI) and public housing estate (PH) had the least. Tree dimensions and tree habitats were significantly associated. The associations between the 2831 DD and tree-position groups, tree habitats and tree hazard rating were analyzed. Fourteen trees from Ficus microcarpa, Ficus virens and Gleditsia fera had high hazard rating, 179 trees from 22 species moderate rating, and 159 trees from 55 species low rating. RTI, roadside tree strip (RTS), roadside tree pit (RTP), roadside planter (RP) and stone wall (SW) had more moderate hazard rating, and PPG, roadside slope (RS) and government, institutional and community land (GIC) more low rating. Redundancy analysis showed that DD were positively correlated with RTS, RTP, RP and SW, but negatively correlated with PPG, RS and GIC (p < 0.05). The DD significantly increased tree hazard rating and failure potential. Future management implications for heritage-tree conservation and enhancement focusing squarely on critical tree defect-disorder in urban Hong Kong were explored, with application to other compact cities.     

Relationships between bole and crown size for young urban trees in the northeastern USA

Knowledge of allometric equations can enable urban forest managers to meet desired economic, social, and ecological goals. However, there remains limited regional data on young tree growth within the urban landscape. The objective of this study is to address this research gap and examine interactions between age, bole size and crown dimensions of young urban trees in New Haven, CT, USA to identify allometric relationships and generate predictive growth equations useful for the region. This study examines the 10 most common species from a census of 1474 community planted trees (ages 4–16). Regressions were applied to relate diameter at breast height (dbh), age (years since transplanting), tree height, crown diameter and crown volume. Across all ten species each allometric relationship was statistically (p < 0.001) significant at an α-level of 0.05. Consistently, shade trees demonstrated stronger relationships than ornamental trees. Crown diameter and dbh displayed the strongest fit with eight of the ten species having an R² > 0.70. Crown volume exhibited a good fit for each of the shade tree species (R² > 0.85), while the coefficients of determination for the ornamentals varied (0.38 < R² < 0.73). In the model predicting height from dbh, ornamentals displayed the lowest R² (0.33 < R² < 0.55) while shade trees represented a much better fit (R² > 0.66). Allometric relationships can be used to develop spacing guidelines for commonly planted urban trees. These correlations will better equip forest managers to predict the growth of urban trees, thereby improving the management and maintenance of New England's urban forests.     

Enhancing plant diversity and mitigating BVOC emissions of urban green spaces through the introduction of ornamental tree species

Promoting the plant diversity of urban green spaces is crucial to increase ecosystem services in urban areas. While introducing ornamental plants can enhance the biodiversity of green spaces it risks environmental impacts such as increasing emissions of biogenic volatile organic compounds (BVOCs) that are harmful to air quality and human health. The present study, taking Qingdao City as a case study, evaluated the plant diversity and BVOC emissions of urban green spaces and tried to find out a solution to increase biodiversity while reducing BVOC emissions. Results showed that: (1) the species diversity and phylogenetic diversity of trees in urban green spaces were 22% and 16% lower than rural forest of this region; (2) urban areas had higher BVOC emission intensity (2.6 g C m⁻² yr⁻¹) than their rural surroundings (2.1 g C m⁻² yr⁻¹); (3) introducing the selected 11 tree species will increase 15% and 11% of species diversity and phylogenetic diversity, respectively; and (4) the BVOC emissions from green spaces will more than triple by 2050, but a moderate introduction of the selected low-emitting trees species could reduce 34% of these emissions. The scheme of introducing low-emitting ornamental species leads to a win–win situation and also has implications for the sustainable green space management of other cities.     

Current and potential carbon stocks of trees in urban parking lots in towns of the Eastern Cape,South Africa

Greening of shopping centre parking lots is a potentially important strategy that can contribute to urban carbon mitigation efforts, improve aesthetics and the shopping experience of consumers, whilst adding to urban biodiversity. Twenty-eight shopping centre parking lots in six Eastern Cape urban centres, South Africa, were sampled to determine tree species composition, density and annual carbon sequestration potential. The best case parking lot found during the study was used as a benchmark to display the difference between current tree density and above-ground carbon stocks relative to the potential optimum. The highest tree density was 66 trees ha^?1, whereas the average density across all sampled parking lots was less than half that (27.2 ± 22.6 trees ha^?1). The average annual carbon sequestration potential per parking lot was 1390 ± 2503 kg ha^?1. Planting density was positively related to annual sequestration rates, whilst parking lot age and the mean annual rainfall of the town had no influence. Mean tree species richness per parking lot was 2.3 ± 1.8 species, with a positive relationship to parking lot size, but not to mean annual rainfall of the site. The majority of trees (62.5%) in parking lots were alien species, although newer parking lots had significantly greater proportions of indigenous species. There was no difference in mean annual carbon sequestration rate per tree between indigenous and alien trees species. Low tree densities and small parking lot areas constrained the potential for earning carbon credits from trees in parking lots. Nonetheless, planners and designers need to be more aware of the potential contribution of trees towards urban sustainability.     

The influence of increasing tree cover on mean radiant temperature across a mixed development suburb in Adelaide,Australia

The implementation of trees in urban environments can mitigate outdoor thermal stress. Growing global urban population and the risk of heatwaves, compounded by development driven urban warmth (the urban heat island), means more people are at risk of heat stress in our cities. Effective planning of urban environments must minimise heat-health risks through a variety of active and passive design measures at an affordable cost. Using the Solar and Longwave Environmental Irradiance Geometry (SOLWEIG) model and working within the bounds of current urban design, this study aimed to quantify changes in mean radiant temperature (T_mrt) from increased tree cover at five different 200 × 200 m urban forms (including compact mid-rise development, residential and open grassy areas) within a suburb of Adelaide, Australia during summer. Following a successful validation of SOLWEIG, street trees were strategically distributed throughout each of the five urban forms and the model run over five warm sunny days (13–17 February 2011). Results showed spatially averaged daytime (7:30–20:00) T_mrt reduced by between 1.7 °C and 5.1 °C at each site, while under peak heating conditions (16 February, 14:00) T_mrt reduced by between 2.0 °C and 7.1 °C. The largest reduction in T_mrt under peak warming conditions was at the residential site, despite having the fewest number of trees added. Directly below clusters of trees, T_mrt could be reduced by between 14.1 °C and 18.7 °C. SOLWEIG also highlighted that more built-up sites showed higher T_mrt under peak warming conditions due to increased radiation loading from 3D urban surfaces, but over the course of the day, open sites were exposed to greater and more uniform T_mrt. This study clearly demonstrates the capacity of street trees to mitigate outdoor thermal stress and provides guidance for urban planners on strategic street tree implementation.     

Density,diversity and richness of woody plants in urban green spaces: A case study in Chennai metropolitan city

A tree diversity inventory was carried out in urban green spaces (UGSs) of Chennai metropolitan city, India. This inventory aims to study the diversity, density and richness of trees in UGSs of Chennai. A total of one hundred 10 m × 10 m (total 1 ha) plots were laid to reveal tree diversity and richness of UGSs. Trees with ≥10 cm girths at breast height (gbh) were inventoried. We recorded 45 species in 42 genera and 21 families. Caesalpiniaceae and Fabaceae each with 6 species dominated the study area followed by Arecaceae (3). Density and stand basal area of the present study were 500 stems ha^?1 and 64.16 m², respectively. Most of the inventoried trees were native (31 species) and deciduous (28 species). Fabaceae and Caesalpiniaceae dominated the present study area in terms of stand basal area and density. The Shannon diversity index and evenness of study area were 2.79 and 0.73, respectively. The most important species and families based on species important value index (IVI) and family important value index were Albizia saman, Polyalthia longifolia and Azadirachta indica; Fabaceae, Caesalpiniaceae and Annonaceae respectively. We find Chennai's urban forest is relatively superior to many urban forests of the world in terms of stand basal area and species richness. Results emphasize the importance of enhancement of urban green spaces in Chennai metropolitan city.     

Estimation of broad-leaved canopy growth in the urban forested area using multi-temporal airborne LiDAR datasets

Inter-annual canopy growth is one of the key indicators for assessing forest conditions, but the measurements require laborious field surveys. Up-to-date LiDAR remote sensing provides sufficient three-dimensional morphological information of the ground to monitor canopy heights on a broad scale. Thus, we attempted to use multi-temporal airborne LiDAR datasets in the estimation of vertical canopy growth, across various types of broad-leaved trees in a large urban park.The growth of broad-leaved canopies in the EXPO '70 urban forest in Osaka, Japan was assessed with 19 plots at the stand level and 39 selected trees at the individual-tree level. Airborne LiDAR campaigns repeatedly observed the park in the summers of 2004, 2008, and 2010. We acquired canopy height models (CHMs) for each year from the height values of the uppermost laser returns at every 0.5 m grid. The annual canopy growth was calculated by the differences in CHMs and validated with the annual changes in field-measured basal areas and tree heights.LiDAR estimations revealed that the average annual canopy growth from 2004 to 2010 was 0.26 ± 0.11 m m⁻² yr⁻¹ at the plot level and 0.26 ± 0.10 m m⁻² yr⁻¹ at the individual-tree level. This result showed that growing trends were consistent at different scales through 2004 to 2010 despite uncertainty in estimating short-term growth for small crown areas at the individual-tree level. This LiDAR-estimated canopy growth shows a moderate relation to field-measured increase of basal areas and average heights. The estimation uncertainties seem to result from the complex canopy structure and irregular crown shape of broad-leaved trees. Challenges still remain on how to incorporate the growth of understory trees, growth in the lateral direction, and gap dynamics inside the canopy, particularly in applying multi-temporal LiDAR datasets to the large-scale growth assessment.     

Fine-scale characterization of bird habitat using airborne LiDAR in an urban park in Japan

Birds are ecosystem service providers and excellent urban ecosystem indicators because they are sensitive to habitat structure. Light detection and ranging (LiDAR) technology is a promising tool in bird habitat characterization because it can directly acquire fine-scale 3-D information over large areas; however, most of past avian ecological studies using LiDAR were conducted in North America and Europe, and there have been no studies in Asia. The robustness of LiDAR data across different habitat types remain problematic. In this study, we set 13 plots having different canopy area percentages in a large-scale urban park in Japan, and examined the usefulness of airborne LiDAR data in modeling richness and diversity of forest bird species and the abundance of Paridae species that play an important role in the urban food web. Bird surveys were conducted eight times at each plot during the birds’ breeding season, and the results were estimated using generalized linear models. In consequence, all of the response variables were explained by one or a few LiDAR variables, and the 1 × 1 × 1-m voxel-based variables were especially robust estimators. When targeting only densely-forested plots having more than 60% canopy area, the LiDAR data efficiency declined in estimation of the richness and diversity of whole forest bird species, whereas a laser penetration rate was efficient for estimating the Paridae species abundance. These results implied that the LiDAR data are useful in habitat characterization of forest birds, and even when targeting only dense forests, some LiDAR variables are effective for habitat estimation of birds preferring specific forest structures. In the future, application of LiDAR across a variety of ecosystems will greatly serve to develop adaptive conservation and management planning for urban forests.     

Effects of roads on fruit crop and removal rate from rowanberry trees (Sorbus aucuparia) by birds in urban areas of Finland

Roads destroy natural habitats. To reduce erosion, support wildlife and decorate surroundings, ornamental trees are planted near the roadside. However, it is inadequately understood how roads influence fruit production of trees and birds that consume their fruits, within urban landscapes. During the autumn and winter of 2012–2013, we studied the extent to which birds used the fruit from rowanberry trees (Sorbus aucuparia), in two cities along a 700 km latitudinal gradient in Finland. In matched pair design (total of 35 pairs), we compared roadside trees (approximately 8 m from main roads) with trees grown away from roads (control trees; approximately >80 m from the roads). During the autumn, each rowanberry tree pair was photographed, and frugivorous birds were surveyed twice per month until all of the rowanberry fruit-crop was consumed. There was no difference in fruit crop size between roadside trees and control trees. A total of eight frugivorous bird species and 960 individuals were observed foraging in roadside trees. The three most abundant species were Bohemian waxwing (Bombycilla garrulus, 56.4%), Pine Grosbeak (Pinicola enucleator, 28.9%) and Fieldfare (Turdus pilaris, 10.5%). Total abundance and species richness of frugivorous birds were lower around roadside trees than control trees during most of the study period. Fruits were consumed later from roadside trees than from control trees, probably due to human-caused disturbance. Therefore, roadside rowanberry trees extended the period when frugivorous birds stayed in urban habitats. Later consumption of fruits in northern areas than in southern areas was related to earlier peak abundance of frugivorous birds in south than in north. Our results indicated that rowanberry is a suitable ornamental tree for urban and roadside landscaping and may additionally benefit birds and other frugivorous wildlife.     

Private residential urban forest structure and carbon storage in a moderate-sized urban area in the Midwest,United States

In conjunction with urbanization and its importance as a major driver of land-use change, increased efforts have been placed on understanding urban forests and the provisioning of ecosystem services. However, very little research has been conducted on private property and little is known about the structure and function of privately owned urban forests. This research examines the structure of and carbon storage services provided by private residential urban forests in a moderate-sized Midwestern city. The primary research questions are as follows: What is the structure of private urban forests, and how does it vary across parcels? How much carbon is stored in tree and soil pools of private urban forests, and how does carbon vary across parcels? Ecological inventories were conducted on 100 residential parcels within 14 Neighborhood and Homeowners Associations of varying size and development age. Tree species richness, diversity, density, and diameter distribution were determined on a per parcel basis and for the entire tree population sampled. Further, tree and soil carbon storage were determined for each parcel. Results of this research demonstrated large variability in per-parcel tree metrics. Twelve of the parcels sampled had two or fewer trees, while eleven had greater than 50 trees. Further, tree carbon storage ranged from no carbon to 11.22 kg C m^?2. Alternatively, soil carbon storage was less variable and averaged 4.7 kg C m^?2, approximately 1.9 times higher than the average carbon stored in trees (2.5 kg C m^?2). Management efforts aimed at maintaining or enhancing carbon storage and other ecosystem services should focus on both soil protection and maximizing services in living biomass. Our results demonstrate that sustaining tree-produced ecosystem services requires maintenance of large old trees and species diversity, not only in terms of relative abundance, but also relative dominance, and in combination, species–specific size distributions.     

Adapting and applying evidence gathering techniques for planning and investment in street trees: A case study from Brisbane,Australia

Trees along footpath zones (or verges) grow on the “front-line” of urban forest ecosystems, increasingly recognised as essential to the quality of human life in cities. Growing so close to where residents live, work and travel, these street trees require careful planning and active management in order to balance their benefits against risks, liabilities, impacts and costs. Securing support and investment for urban trees is tough and robust business cases begin with accurate information about the resource. Few studies have accounted for spatial heterogeneity within a single land-use type in analyses of structure and composition of street tree populations. Remotely sensed footpath tree canopy cover data was used as a basis for stratification of random sampling across residential suburbs in the study area of Brisbane, Australia. Analysis of field survey data collected in 2010 from 80 representative sample sites in 52 suburbs revealed street tree population (432,445 ± 26,293) and stocking level (78%) estimates with low (6.08%) sampling error. Results also suggest that this population was transitioning to low risk, small-medium sized species with unproven longevity that could limit the capacity of the Brisbane’s Neighbourhood Shadeways planting program to expand from 35% footpath tree canopy cover in 2010, to a target of a 50% by 2031. This study advances the use of contemporary techniques for sampling extensive, unevenly distributed urban tree populations and the value of accurate resource knowledge to inform evidence-based planning and investment for urban forests.     

Effect of urbanization and climate change in the rooting zone on the growth and physiology of Pyrus calleryana

It is well known that trees can reduce the urban heat island and adapt our cities to climate change through evapotranspiration. However, the effects of urbanization and anticipated climate change in the soil–root rhizosphere have not been widely investigated. The current study studied the growth and physiology of the urban tree Pyrus calleryana grown in a factorial experiment with or without urbanization and simulated climate change between April 2010 and December 2012 in the Botanical Grounds of the University of Manchester, UK. The study indicated that urbanization and simulated climate change had small but contrasting effects on tree growth and morphology. Urbanization increased tree growth by 20–30%, but did not affect leaf area index (LAI) and showed reduced peak water loss and hence evapotranspirational cooling. Although soil moisture content in the upper 20 cm was higher in the urbanized plots, urbanization showed reduced sap flux density, reduced chlorophyll a:b and delayed recovery of chlorophyll fluorescence (Fv:Fm) throughout the experimental period. In contrast, simulated climate change had no effect on growth but increased LAI by 10%. Despite being more water stressed, trees grown in simulated climate change plots lost more water both according to porometry and sap flow measurements. Simulated climate change increased peak energy and water loss by around 13%, with trees having an average sap flux density of around 170 g cm^?2 d^?1, 40% higher than trees grown in control plots. Our study suggested that transpirational cooling benefit might be enhanced with a longer growth season and higher soil temperature in places such as Manchester, UK in future, but potentially at the expense of photosynthesis and carbon gain.