The influence of increasing tree cover on mean radiant temperature across a mixed development suburb in Adelaide,Australia

The implementation of trees in urban environments can mitigate outdoor thermal stress. Growing global urban population and the risk of heatwaves, compounded by development driven urban warmth (the urban heat island), means more people are at risk of heat stress in our cities. Effective planning of urban environments must minimise heat-health risks through a variety of active and passive design measures at an affordable cost. Using the Solar and Longwave Environmental Irradiance Geometry (SOLWEIG) model and working within the bounds of current urban design, this study aimed to quantify changes in mean radiant temperature (T_mrt) from increased tree cover at five different 200 × 200 m urban forms (including compact mid-rise development, residential and open grassy areas) within a suburb of Adelaide, Australia during summer. Following a successful validation of SOLWEIG, street trees were strategically distributed throughout each of the five urban forms and the model run over five warm sunny days (13–17 February 2011). Results showed spatially averaged daytime (7:30–20:00) T_mrt reduced by between 1.7 °C and 5.1 °C at each site, while under peak heating conditions (16 February, 14:00) T_mrt reduced by between 2.0 °C and 7.1 °C. The largest reduction in T_mrt under peak warming conditions was at the residential site, despite having the fewest number of trees added. Directly below clusters of trees, T_mrt could be reduced by between 14.1 °C and 18.7 °C. SOLWEIG also highlighted that more built-up sites showed higher T_mrt under peak warming conditions due to increased radiation loading from 3D urban surfaces, but over the course of the day, open sites were exposed to greater and more uniform T_mrt. This study clearly demonstrates the capacity of street trees to mitigate outdoor thermal stress and provides guidance for urban planners on strategic street tree implementation.     

The feasibility of remotely sensed data to estimate urban tree dimensions and biomass

Accurately measuring the biophysical dimensions of urban trees, such as crown diameter, stem diameter, height, and biomass, is essential for quantifying their collective benefits as an urban forest. However, the cost of directly measuring thousands or millions of individual trees through field surveys can be prohibitive. Supplementing field surveys with remotely sensed data can reduce costs if measurements derived from remotely sensed data are accurate. This study identifies and measures the errors incurred in estimating key tree dimensions from two types of remotely sensed data: high-resolution aerial imagery and LiDAR (Light Detection and Ranging). Using Sacramento, CA, as the study site, we obtained field-measured dimensions of 20 predominant species of street trees, including 30–60 randomly selected trees of each species. For each of the 802 trees crown diameter was estimated from the aerial photo and compared with the field-measured crown diameter. Three curve-fitting equations were tested using field measurements to derive diameter at breast height (DBH) (r² = 0.883, RMSE = 10.32 cm) from the crown diameter. The accuracy of tree height extracted from the LiDAR-based surface model was compared with the field-measured height (RMSE = 1.64 m). We found that the DBH and tree height extracted from the remotely sensed data were lower than their respective field-measured values without adjustment. The magnitude of differences in these measures tended to be larger for smaller-stature trees than for larger stature species. Using DBH and tree height calculated from remotely sensed data, aboveground biomass (r² = 0.881, RMSE = 799.2 kg) was calculated for individual tree and compared with results from field-measured DBH and height. We present guidelines for identifying potential errors in each step of data processing. These findings inform the development of procedures for monitoring tree growth with remote sensing and for calculating single tree level carbon storage using DBH from crown diameter and tree height in the urban forest.     

Influence of tree crown characteristics on the local PM10 distribution inside an urban street canyon in Antwerp (Belgium): A model and experimental approach

Apart from influencing the amount of leaf-deposited particles, tree crown morphology will influence the local distribution of atmospheric particles. Nevertheless, tree crowns are often represented very rudimentary in three-dimensional air quality models. Therefore, the influence of tree crown representation on the local ambient PM₁₀ concentration and resulting leaf-deposited PM₁₀ mass was evaluated, using the three-dimensional computational fluid dynamics (CFD) model ENVI-met^® and ground-based LiDAR imaging. The modelled leaf-deposited PM₁₀ mass was compared to gravimetric results within three different particle size fractions (0.2–3, 3–10 and >10 μm), obtained at 20 locations within the tree crown. Modelling of the LiDAR-derived tree crown resulted in altered atmospheric PM₁₀ concentrations in the vicinity of the tree crown. Although this model study was limited to a single tree and model configuration, our results demonstrate that improving tree crown characteristics (shape, dimensions and LAD) affects the resulting local PM₁₀ distribution in ENVI-met. An accurate tree crown representation seems, therefore, of great importance when aiming at modelling the local PM distribution.     

The effect of tree shade and grass on surface and globe temperatures in an urban area

The process of urbanisation alters the thermal balance of an area resulting in an urban heat island effect where cities can be several degrees centigrade warmer than the surrounding rural landscape. This increased heat can make cities uncomfortable places and, during heat waves, can pose serious health risks. This study looked at the role that trees and grass can play in reducing regional and local temperatures in urban areas during the summer within the urban landscape of Manchester, UK. In June and July 2009 and 2010, we monitored the surface temperatures of small plots composed of concrete and grass in the presence or absence of tree shading, and measured globe temperatures above each of the surfaces. The same measures were also recorded at mid-day on larger expanses of asphalt and grass in an urban park. Both surface and shade greatly affected surface temperatures. Grass reduced maximum surface temperatures by up to 24 °C, similar to model predictions, while tree shade reduced them by up to 19 °C. In contrast, surface composition had little effect upon globe temperatures, whereas shading reduced them by up to 5–7 °C. These results show that both grass and trees can effectively cool surfaces and so can provide regional cooling, helping reduce the urban heat island in hot weather. In contrast grass has little effect upon local air or globe temperatures, so should have little effect on human comfort, whereas tree shade can provide effective local cooling.     

Multiparametric model of urban park cooling island

This paper presents a study of mitigation of the heat island effect in the built environment with urban (city) parks. The park cooling island (PCI) effect, considering park grass cover and trees’ density and age, is determined for selected extreme summer days at various wind speeds under the optimum soil water conditions in the root zone based on an all-day quasi-stationary thermal response. PCI was determined numerically by coupling a CFD model of an urban park and quasi-steady state, two-zone thermal response boundary condition models of each park element. The boundary models are evaluated in form of multi-parameter approximation polynomials taking into account the sensible and latent heat transfer and the geometrical, optical and thermal properties of park elements. Three-dimensional CFD modelling was used for the determination of temperature, humidity and air velocity fields in an urban park with a size of 140 m × 140 m. Based on the comparison of the measured and numerically determined air temperatures in the tree crowns, we proved that the method of linking the models is adequate for temperature and flow condition modelling in the city park environment.The results are presented in the form of local PCI as the difference between local air temperature in the pedestrian zone and the reference air temperature preceding the park. The study proved that it is possible to normalise the cooling effect using the specific dimensionless coefficient of leaf area (LAI_sp), which includes an approximation of the density of trees planted in the park and their size or age. It was found out that the cooling effect of the park is up to ?4.8 °C at LAI_sp, equal to 3.16, which corresponds to a planting density of 45 trees per hectare, with an age of 50 years. It was also found that with the length of the park cooling effect change decreases. The optimal length of the park with a LAI_sp 3 is 130 m.     

Relationships between bole and crown size for young urban trees in the northeastern USA

Knowledge of allometric equations can enable urban forest managers to meet desired economic, social, and ecological goals. However, there remains limited regional data on young tree growth within the urban landscape. The objective of this study is to address this research gap and examine interactions between age, bole size and crown dimensions of young urban trees in New Haven, CT, USA to identify allometric relationships and generate predictive growth equations useful for the region. This study examines the 10 most common species from a census of 1474 community planted trees (ages 4–16). Regressions were applied to relate diameter at breast height (dbh), age (years since transplanting), tree height, crown diameter and crown volume. Across all ten species each allometric relationship was statistically (p < 0.001) significant at an α-level of 0.05. Consistently, shade trees demonstrated stronger relationships than ornamental trees. Crown diameter and dbh displayed the strongest fit with eight of the ten species having an R² > 0.70. Crown volume exhibited a good fit for each of the shade tree species (R² > 0.85), while the coefficients of determination for the ornamentals varied (0.38 < R² < 0.73). In the model predicting height from dbh, ornamentals displayed the lowest R² (0.33 < R² < 0.55) while shade trees represented a much better fit (R² > 0.66). Allometric relationships can be used to develop spacing guidelines for commonly planted urban trees. These correlations will better equip forest managers to predict the growth of urban trees, thereby improving the management and maintenance of New England's urban forests.     

The impact of greenspace size on the extent of local nocturnal air temperature cooling in London

Urban greenspaces can provide a significant cooling service, which extends beyond the greenspace boundaries. Consequently, greenspaces are recognised for their ability to locally reduce the urban heat island, a phenomenon that has negative implications for the thermal comfort and health of urban citizens. However, the amount of cooling provided by a greenspace and the distance over which that cooling extends depend on factors such as greenspace size and characteristics. Based on data collected in and around eight London greenspaces, with areas ranging from 0.2 to 12.1 ha, this work models the distance and magnitude of cooling provided by each greenspace and defines the relationships between cooling extent and the size of greenspace or the areas of tree canopy and grass. Such data, illustrating the value of expanding the area of urban greenspaces and explaining how cooling relates to greenspace size/coverage characteristics, will be of use to urban planners and climatologists concerned with finding solutions to the urban heat island. Modelling was statistically valid on calm warm nights (with mean air temperatures ≥10 °C and wind speed ≤3 m s⁻¹). On those nights, cooling distance increased linearly with increasing area of greenspace, tree canopy and grass, but the relationship between those factors and the amount of cooling was non-linear. Cooling distance was most strongly related with tree canopy whereas the amount of cooling was most strongly linked to the grass coverage. Our results suggest that a comprehensive cooling service on calm warm nights within cities with similar climate/characteristics to London may come from greenspaces with 3–5 ha, situated 100–150 m apart.     

Defect-disorder and risk assessment of heritage trees in urban Hong Kong

Heritage trees in a city, echoing factors conducive to outstanding performance, deserve special care and conservation. To understand their structural and health conditions in urban Hong Kong, 30 defect-disorder (DD) symptoms (physical and physiological) subsumed under four tree-position groups (soil-root, trunk, branching, and crown-foliage) and tree hazard rating were evaluated. The surveyed 352 trees included 70 species; 14 species with 233 trees were native. More trees had medium height (10–15 m), medium DBH (1–1.5 m) and large crown (>15 m). In ten habitats, public park and garden (PPG) accommodated the most trees, and roadside traffic island (RTI) and public housing estate (PH) had the least. Tree dimensions and tree habitats were significantly associated. The associations between the 2831 DD and tree-position groups, tree habitats and tree hazard rating were analyzed. Fourteen trees from Ficus microcarpa, Ficus virens and Gleditsia fera had high hazard rating, 179 trees from 22 species moderate rating, and 159 trees from 55 species low rating. RTI, roadside tree strip (RTS), roadside tree pit (RTP), roadside planter (RP) and stone wall (SW) had more moderate hazard rating, and PPG, roadside slope (RS) and government, institutional and community land (GIC) more low rating. Redundancy analysis showed that DD were positively correlated with RTS, RTP, RP and SW, but negatively correlated with PPG, RS and GIC (p < 0.05). The DD significantly increased tree hazard rating and failure potential. Future management implications for heritage-tree conservation and enhancement focusing squarely on critical tree defect-disorder in urban Hong Kong were explored, with application to other compact cities.     

Influence of temperature and bark injuries on the development of Phytophthora cactorum and P. Citrophthora on peach trees

The effect of temperature and bark injuries on the occurrence of crown rot of peach trees caused by P. cactorum and P. citrophthora were examined in field and laboratory. Lesions developed at 35 °C (the complete range of temperatures tested) but maximum development occurred at 20–25 °C. Greatest growth of these fungi on cornmeal agar (CMA) also occurred between 15 and 30 °C. Both pathogens could infect injured trees up to 20 days after wounding, but could not infect uninjured plants or plants wounded 40 and 30 days before inoculation, respectively. This study showed that temperature is a critical factor for the development of Phytophthora crown rot of peach trees. In addition, crown rot developed from recent wounds inoculated with agar plugs of Phytophthora.     

The overlooked carbon loss due to decayed wood in urban trees

Decayed wood is a common issue in urban trees that deteriorates tree vitality over time, yet its effect on biomass yield therefore stored carbon has been overlooked. We mapped the occurrence and calculated the extent of decayed wood in standing Ulmus procera, Platanus × acerifolia and Corymbia maculata trees. The main stem of 43 trees was measured every metre from the ground to the top by two skilled arborists. All trees were micro-drilled in two to four axes at three points along the stem (0.3 m, 1.3 m, 2.3 m), and at the tree’s live crown. A total of 300 drilling profiles were assessed for decay. Simple linear regression analysis tested the correlation of decayed wood (cm²) against a vitality index and stem DBH. Decay was more frequent and extensive in U. procera, than P. acerifolia and least in C. maculata. Decay was found to be distributed in three different ways in the three different genera. For U. procera, decay did appear to be distributed as a column from the base to the live crown; whereas, decay was distributed as a cone-shape in P. acerifolia and was less likely to be located beyond 2.3 m. In C. maculata decay was distributed as pockets of variable shape and size. The vitality index showed a weak but not significant correlation with the proportion of decayed wood for P. acerifolia and C. maculata but not for U. procera. However, in U. procera, a strong and significant relationship was found between DBH and stem volume loss (R² = 0.8006, P = 0.0046, n = 15). The actual volume loss ranged from 0.17 to 0.75 m³, equivalent to 5%–25% of the stem volume. The carbon loss due to decayed wood for all species ranged between 69–110 kg per tree. Based on model’s calculation, the stem volume of U. procera trees with DBH ≥ 40 cm needs to be discounted by a factor of 13% due to decayed wood regardless of the vitality index. Decayed wood reduces significantly the tree’s standing volume and needs to be considered to better assess the carbon storage potential of urban forests.     

Crown reaction and acclimation to cyclical V-trimming of city trees: An analysis using terrestrial laser scanning

Trimming is an important practice for reducing potential contact between trees and power lines. V-trimming occurs when a tree is located directly under the electrical wires and results in the formation of a bilateral crown, but not much is known about a tree’s reaction and acclimation to such a repeated stress in an urban context.Using Terrestrial Laser Scanning (TLS), we present a study that focuses on documenting (i) short term effect of V-trimming on the tree structure, through the quantification and analysis of the dispersion of trimming induced branch loss and subsequent growth reaction, and, (ii) long term acclimation (i.e. changes in biomass location) of tree structure to repeated unidirectional trimming. A voxelisation method was used to derive space exploration metrics from TLS data based on explored volume quantification and voxels dispersion within the tree crown.Our results show that V-trimming induces a significant decrease in explored crown space volume (12.8% on average) but that this loss is regained by trimmed trees within only 1 year following trimming thanks to a rapid regrowth rate. This was supported by an analysis of radial growth that showed that the growth of trimmed trees was greater than non-trimmed trees although this tendency was not statistically significant. In our study this regrowth was achieved without suckering; instead the regrowth mainly occurred within the crown periphery. We also observed that trimming had a significant influence on the way trees explore space with their crowns. While non-trimmed trees explored space preferentially toward a South direction, trimmed trees explored space in directions perpendicular to the wires (East and West). We also observed that crown biomass was located more in the extreme crown periphery in trimmed trees compared to non-trimmed trees.     

Street trees in Bangalore: Density,diversity, composition and distribution

Once renowned as India’s “garden city”, the fast growing southern Indian city of Bangalore is rapidly losing tree cover in public spaces including on roads. This study aims to study the distribution of street trees in Bangalore, to assess differences in tree density, size and species composition across roads of different widths, and to investigate changes in planting practices over time. A spatially stratified approach was used for sampling with 152 transects of 200 m length distributed across wide roads (with a width of 24 m or greater), medium sized roads (12–24 m) and narrow roads (less than 12 m). We find the density of street trees in Bangalore to be lower than many other Asian cities. Species diversity is high, with the most dominant species accounting for less than 10% of the overall population. Narrow roads, usually in congested residential neighborhoods, have fewer trees, smaller sized tree species, and a lower species diversity compared to wide roads. Since wide roads are being felled of trees across the city for road widening, this implies that Bangalore’s street tree population is being selectively denuded of its largest trees. Older trees have a more diverse distribution with several large sized species, while young trees come from a less diverse species set, largely dominated by small statured species with narrow canopies, which have a lower capacity to absorb atmospheric pollutants, mitigate urban heat island effects, stabilize soil, prevent ground water runoff, and sequester carbon. This has serious implications for the city’s environmental and ecological health. These results highlight the need to protect large street trees on wide roads from tree felling, and to select an appropriate and diverse mix of large and small sized tree species for new planting.     

Estimation of broad-leaved canopy growth in the urban forested area using multi-temporal airborne LiDAR datasets

Inter-annual canopy growth is one of the key indicators for assessing forest conditions, but the measurements require laborious field surveys. Up-to-date LiDAR remote sensing provides sufficient three-dimensional morphological information of the ground to monitor canopy heights on a broad scale. Thus, we attempted to use multi-temporal airborne LiDAR datasets in the estimation of vertical canopy growth, across various types of broad-leaved trees in a large urban park.The growth of broad-leaved canopies in the EXPO '70 urban forest in Osaka, Japan was assessed with 19 plots at the stand level and 39 selected trees at the individual-tree level. Airborne LiDAR campaigns repeatedly observed the park in the summers of 2004, 2008, and 2010. We acquired canopy height models (CHMs) for each year from the height values of the uppermost laser returns at every 0.5 m grid. The annual canopy growth was calculated by the differences in CHMs and validated with the annual changes in field-measured basal areas and tree heights.LiDAR estimations revealed that the average annual canopy growth from 2004 to 2010 was 0.26 ± 0.11 m m⁻² yr⁻¹ at the plot level and 0.26 ± 0.10 m m⁻² yr⁻¹ at the individual-tree level. This result showed that growing trends were consistent at different scales through 2004 to 2010 despite uncertainty in estimating short-term growth for small crown areas at the individual-tree level. This LiDAR-estimated canopy growth shows a moderate relation to field-measured increase of basal areas and average heights. The estimation uncertainties seem to result from the complex canopy structure and irregular crown shape of broad-leaved trees. Challenges still remain on how to incorporate the growth of understory trees, growth in the lateral direction, and gap dynamics inside the canopy, particularly in applying multi-temporal LiDAR datasets to the large-scale growth assessment.     

Estimating the stormwater attenuation benefits derived from planting four monoculture species of deciduous trees on vacant and underutilized urban land parcels

This paper presents research that was undertaken to determine whether planting deciduous trees, using intensive tree planting schemes, on vacant and underutilized urban land provides significant hydrologic benefits. This work contributes to an ongoing discussion on how to use vacant and underutilized land productively, and may be important to land use decision-makers, whose policies support the use of green infrastructure for stormwater management. Tree growth parameters for four monoculture planting schemes were modeled (all trees had a 50.8 mm caliper at planting) and included (i) 450 Ginkgo biloba, (ii) 92 Platanus × acerifolia, (iii) 120 Acer saccharinum, and (iv) 434 Liquidambar styraciflua, on a 1.6-acre parcel. i-Tree Hydro (formerly UFORE-Hydro) was used to derive a simplified Microsoft Excel-based water balance model to quantify the canopy interception potential and evaporation, based on 7 years (2002–2008) of historical hourly rainfall and mean temperature data in Hamilton, Ontario, Canada. This study revealed that three of the species responded similarly, while one species (L. styraciflua) performed significantly better with respect to total canopy storage potential and evaporation, capturing and evaporating 2.9 m³/tree over the 7 years analyzed, or 1280 m³ for the total tree stand of 434 trees. The analyses presented herein demonstrate that the tree canopy layer was able to intercept and evaporate approximately 6.5%–11% of the total rainfall that falls onto the crown across the 7 years studied, for the G. biloba, P. × acerifolia and A. saccharinum tree stands and 17%–27% for the L. styraciflua tree stand. This study revealed that the rate at which a species grows, the leaf area index of the species as it matures, and the total number of trees to be planted need to be determined to truly understand the behavior and potential benefits of different planting schemes; had the mature leaf area been used as the sole indicator of the stormwater attenuating potential for each species, the A. saccharinum would have been the selected species. Also, had attenuation and evaporation per unit of tree been the only measurement reported, the P. × acerifolia stand would have been deemed the best performing tree, attenuating and evaporating 8.1 m³/tree. While the actual values presented herein may be uncertain because of a lack of locally-derived tree growth models, the approach described warrants further investigation.     

Long-term impact of road salt (NaCl) on soil and urban trees in Edmonton,Canada

The application of de-icing salts for winter road maintenance is recognized as a major contributor to the decline of urban trees. We conducted a long-term monitoring program across several locations in the City of Edmonton (Alberta, Canada) to evaluate the impact of roadway salt application on tree species widely planted in boulevards and right-of-ways: Ulmus americana, Fraxinus pennsylvanica, Pinus contorta, and Picea glauca. Soil and leaf samples were collected from a total of 16 sites over six years. There were four sites selected for each tree species: three mid- to high- traffic roadside sites that received regular winter maintenance and one non-serviced site (control). Sampling was performed three times per year from late spring to late summer. Airborne salinity was assessed in four locations at different distances from the road. In 50% of the roadside sites, soil electrical conductivity (EC) values exceeded 2 dS m⁻¹. Soil pH in all of the roadside sites was also significantly higher than in the control sites, with values ranging from 7.6 to 8.5. In all four species, trees growing in sites with high soil EC had increased leaf Na concentrations and reduced leaf chlorophyll concentrations. Among the airborne monitoring sites, Na deposition in high traffic locations was over four-fold higher than those measured in the control location. Furthermore, Na levels remained relatively high at 20–50 m from the main road. Our data suggest that while soil salinity is among the main stressors affecting roadside trees in Edmonton, salt spray deposition may also have a significant impact on trees located close to high vehicle traffic areas and dense road networks. Our study highlights the importance of collecting data over several years and from multiple locations to account for the spatial and temporal heterogeneity of the urban environments in order to better evaluate the impact of road salt application on urban trees.     

Current and potential carbon stocks of trees in urban parking lots in towns of the Eastern Cape,South Africa

Greening of shopping centre parking lots is a potentially important strategy that can contribute to urban carbon mitigation efforts, improve aesthetics and the shopping experience of consumers, whilst adding to urban biodiversity. Twenty-eight shopping centre parking lots in six Eastern Cape urban centres, South Africa, were sampled to determine tree species composition, density and annual carbon sequestration potential. The best case parking lot found during the study was used as a benchmark to display the difference between current tree density and above-ground carbon stocks relative to the potential optimum. The highest tree density was 66 trees ha^?1, whereas the average density across all sampled parking lots was less than half that (27.2 ± 22.6 trees ha^?1). The average annual carbon sequestration potential per parking lot was 1390 ± 2503 kg ha^?1. Planting density was positively related to annual sequestration rates, whilst parking lot age and the mean annual rainfall of the town had no influence. Mean tree species richness per parking lot was 2.3 ± 1.8 species, with a positive relationship to parking lot size, but not to mean annual rainfall of the site. The majority of trees (62.5%) in parking lots were alien species, although newer parking lots had significantly greater proportions of indigenous species. There was no difference in mean annual carbon sequestration rate per tree between indigenous and alien trees species. Low tree densities and small parking lot areas constrained the potential for earning carbon credits from trees in parking lots. Nonetheless, planners and designers need to be more aware of the potential contribution of trees towards urban sustainability.     

Comparison of non-destructive LAI determination methods and optimization of sampling schemes in an open Populus euphratica ecosystem

Populus euphratica (P. euphratica) grows in the water-limited Tarim River Basin in spatially heterogeneous open ecosystems; thus, efforts to quantify the leaf area index (LAI) with optical instruments developed for homogeneous closed canopies have a high probability of failure. In this study, we explored methods for designing an acceptable sampling scheme to quantify the tree LAI for open P. euphratica canopies in arid areas. Field data were collected from three 30 m × 30 m plots and one 100 m × 100 m plot. We compared three indirect methods, i.e. i) allometry, ii) LAI-2000 canopy analyser, iii) Tracing Radiation and Architecture of Canopies (TRAC), and a new semi-direct method combining leaf density and crown volume (SDDV) method for quantifying the isolated tree and canopy LAI of a P. euphratica forest. We also analysed the effects of random and grid sampling designs on the accuracy of the LAI estimates obtained with the LAI-2000. The results showed that the allometric method is applicable to isolated trees with regular shapes; however, because the LAI of P. euphratica was calculated from an allometric equation based on the basal area (at 1.3 m), the allometric equation is prone to failure if the basal area is beyond a specific range. Because there are no significant differences in the plot size between the allometric and the SDDV method predictions, the proposed SDDV method can be used as an alternative for field measurements. The combination of LAI-2000 and TRAC is found to be more reliable than TRAC only, and the field view of the LAI-2000 sensor and the clumping index are important factors for sparse vegetation LAI retrieval. The results from sampling optimization showed that for the LAI-2000 instrument, the best sampling method is grid sampling, and the sampling interval should not be less than 20 m. For random sampling scheme, the number of sampling points in a 100 m × 100 m plot should be greater than 86 with a coefficients of variation of 15% and an allowable error (AE) of 0.15 m² m⁻², respectively.     

Private residential urban forest structure and carbon storage in a moderate-sized urban area in the Midwest,United States

In conjunction with urbanization and its importance as a major driver of land-use change, increased efforts have been placed on understanding urban forests and the provisioning of ecosystem services. However, very little research has been conducted on private property and little is known about the structure and function of privately owned urban forests. This research examines the structure of and carbon storage services provided by private residential urban forests in a moderate-sized Midwestern city. The primary research questions are as follows: What is the structure of private urban forests, and how does it vary across parcels? How much carbon is stored in tree and soil pools of private urban forests, and how does carbon vary across parcels? Ecological inventories were conducted on 100 residential parcels within 14 Neighborhood and Homeowners Associations of varying size and development age. Tree species richness, diversity, density, and diameter distribution were determined on a per parcel basis and for the entire tree population sampled. Further, tree and soil carbon storage were determined for each parcel. Results of this research demonstrated large variability in per-parcel tree metrics. Twelve of the parcels sampled had two or fewer trees, while eleven had greater than 50 trees. Further, tree carbon storage ranged from no carbon to 11.22 kg C m^?2. Alternatively, soil carbon storage was less variable and averaged 4.7 kg C m^?2, approximately 1.9 times higher than the average carbon stored in trees (2.5 kg C m^?2). Management efforts aimed at maintaining or enhancing carbon storage and other ecosystem services should focus on both soil protection and maximizing services in living biomass. Our results demonstrate that sustaining tree-produced ecosystem services requires maintenance of large old trees and species diversity, not only in terms of relative abundance, but also relative dominance, and in combination, species–specific size distributions.     

Effects of roads on fruit crop and removal rate from rowanberry trees (Sorbus aucuparia) by birds in urban areas of Finland

Roads destroy natural habitats. To reduce erosion, support wildlife and decorate surroundings, ornamental trees are planted near the roadside. However, it is inadequately understood how roads influence fruit production of trees and birds that consume their fruits, within urban landscapes. During the autumn and winter of 2012–2013, we studied the extent to which birds used the fruit from rowanberry trees (Sorbus aucuparia), in two cities along a 700 km latitudinal gradient in Finland. In matched pair design (total of 35 pairs), we compared roadside trees (approximately 8 m from main roads) with trees grown away from roads (control trees; approximately >80 m from the roads). During the autumn, each rowanberry tree pair was photographed, and frugivorous birds were surveyed twice per month until all of the rowanberry fruit-crop was consumed. There was no difference in fruit crop size between roadside trees and control trees. A total of eight frugivorous bird species and 960 individuals were observed foraging in roadside trees. The three most abundant species were Bohemian waxwing (Bombycilla garrulus, 56.4%), Pine Grosbeak (Pinicola enucleator, 28.9%) and Fieldfare (Turdus pilaris, 10.5%). Total abundance and species richness of frugivorous birds were lower around roadside trees than control trees during most of the study period. Fruits were consumed later from roadside trees than from control trees, probably due to human-caused disturbance. Therefore, roadside rowanberry trees extended the period when frugivorous birds stayed in urban habitats. Later consumption of fruits in northern areas than in southern areas was related to earlier peak abundance of frugivorous birds in south than in north. Our results indicated that rowanberry is a suitable ornamental tree for urban and roadside landscaping and may additionally benefit birds and other frugivorous wildlife.     

Effect of urbanization and climate change in the rooting zone on the growth and physiology of Pyrus calleryana

It is well known that trees can reduce the urban heat island and adapt our cities to climate change through evapotranspiration. However, the effects of urbanization and anticipated climate change in the soil–root rhizosphere have not been widely investigated. The current study studied the growth and physiology of the urban tree Pyrus calleryana grown in a factorial experiment with or without urbanization and simulated climate change between April 2010 and December 2012 in the Botanical Grounds of the University of Manchester, UK. The study indicated that urbanization and simulated climate change had small but contrasting effects on tree growth and morphology. Urbanization increased tree growth by 20–30%, but did not affect leaf area index (LAI) and showed reduced peak water loss and hence evapotranspirational cooling. Although soil moisture content in the upper 20 cm was higher in the urbanized plots, urbanization showed reduced sap flux density, reduced chlorophyll a:b and delayed recovery of chlorophyll fluorescence (Fv:Fm) throughout the experimental period. In contrast, simulated climate change had no effect on growth but increased LAI by 10%. Despite being more water stressed, trees grown in simulated climate change plots lost more water both according to porometry and sap flow measurements. Simulated climate change increased peak energy and water loss by around 13%, with trees having an average sap flux density of around 170 g cm^?2 d^?1, 40% higher than trees grown in control plots. Our study suggested that transpirational cooling benefit might be enhanced with a longer growth season and higher soil temperature in places such as Manchester, UK in future, but potentially at the expense of photosynthesis and carbon gain.