共查询到20条相似文献,搜索用时 125 毫秒
1.
松材线虫病是松树的毁灭性病害。福建省已处在松材线虫病的包围之中,该病害传入福建省只是时间的迟早问题。为了延缓该病的传入或一旦传入能及时采取有效的控制办法,笔者分析了该病害的发生规律特点,针对性地提出了病害的预防控制措施和马尾松人工林的经营策略。 相似文献
2.
油橄榄肿瘤病是一种由肿瘤细菌侵入伤口引起的病害,主要为害枝干,影响植株生长和座果,严重时枝条枯萎(除为害油橄榄外也为害白腊、连翘、桂花、桉树等树种)。该病是随油橄榄的引进而传入我国的,目前,在桂林、柳州、独山、重庆、昆明、武汉等种植点均有发生。为迅速消灭该病在我国的发生和蔓延,我们曾在桂林等种植点开展了两年的观察和试验研究工作。现将观察结果和防治意见介绍如下: 一、病害症状肿瘤是该病的主要症状,多发生在主干 相似文献
3.
从松材线虫病的分类地位、发生的寄主条件、媒介昆虫、环境条件等方面分析了该病在金沙县的潜在危险性,并提出了防止该病传播和防治的措施,以期提供参考。 相似文献
4.
<正>洋梨干枯病又称黑病。近年来,该病在滦县响堂地区发生严重。经过观察试验,现已摸清该病在当地的发生规律、发病条件及防治方法。 相似文献
5.
福建省松材线虫病预防措施及可持续控制对策 总被引:4,自引:4,他引:0
松材线虫病是松树的特大毁灭性病害,其病原是松材线虫,传播途径主要是靠松墨天牛携带。福建省已处在松材线虫病的包围之中,松材线虫病传入福建省只是时间的迟早问题。为了延缓该病的传入或一旦传入,能及时采取有效的控制办法,作者提出了预防性措施和可持续控制的对策,主要包括加强检疫措施,加强监测和监控,采取超前的预防控制措施。 相似文献
6.
中国科协组织并邀请专家专题考察松材线虫病的防治 总被引:8,自引:0,他引:8
松材线虫病是近20年来传入我国的一种毁灭性松树病害,它由天牛和人为传播。通常感染后两个月左右即可造成松树枯死,3~5年即可摧毁成片的松林。该病在日本、韩国、美国、加拿大、墨西哥等国都早有发生。日本是受松材线虫病危害最严重的国家,几乎造成了赤松林和黑松... 相似文献
7.
猪蓝耳病又称猪的繁殖与呼吸综合征(PRRS),是一种由动脉炎病毒科中的猪繁殖与呼吸综合征病毒引起的,该病由国外传入我国,已严重影响我国养猪业的发展.该病以繁殖障碍、呼吸困难、耳朵蓝紫、并发其他传染病为主要特征.目前尚无特效治疗药物,因此,做好本病的诊断及预防十分必要. 相似文献
8.
松材线虫病在云南发生的可能性及预防对策 总被引:2,自引:0,他引:2
松材线虫病是松树的毁灭性病害,其病原是松材线虫,松褐天牛是主要传播媒介.在对寄主植物,传播媒介和环境条件进行分折后,认为云南具有该病发生的可能性,并提出了加强检疫、监测和采取超前性预防控制等措施,以杜绝该病在云南的发生. 相似文献
9.
10.
11.
日本松材线虫病防治技术及我省防治对策 总被引:4,自引:2,他引:4
通过对日本国松材线虫病的实地考察 ,介绍该国松材线虫病的发生、除治情况和防治技术研究进展 ,并提出观感与目前我省的防灾对策 相似文献
12.
13.
14.
15.
16.
为提高从松树病死木上取样分离松材线虫的检出率,及时、准确诊断疫木和疫点,根据病害的外部症状,把松材线虫病发病过程分为四个阶段,对各阶段的松材线虫分布、松褐天牛发生情况、含水率的变化、木材蓝变情况等特征进行研究。结果表明:病死木上松材线虫的分布由多到少为:发病前期上部>中部>下部,后期上部<中部<下部,松材线虫的数量与松褐天牛老熟幼虫的数量呈正相关,最佳的取样阶段为第Ⅱ和第Ⅲ阶段靠上部稍段取样,第Ⅳ阶段偏下部取样。 相似文献
17.
Effect of wood species,digester conditions,and defibrator disc distance on wettability of fiberboard
Wettability of medium density fiberboard (MDF) surface affects paint or adhesive application and is, thus, of importance in the course of furniture manufacturing. This study investigated the effects of wood species, digester conditions and defibrator disc distance on the wettability properties. It was found that the wettability of the MDF significantly decreased with increasing the defibrator disc distance and increased with the increment in the severity of the digestion conditions. The highest wettability was found for samples made of beech wood having an average contact angle value of 74.5°, followed by poplar wood (76.5°), birch wood (79.7°), the mixture (1:1) of scots pine and beech wood (82.9°), and scots pine wood (86.4°), respectively. 相似文献
18.
《Scandinavian Journal of Forest Research》2012,27(4):330-350
To study and model the variation of wood properties, sample trees were selected from 42 Norway spruce and 20 Scots pine stands covering a wide variation in climatic and site conditions, stand maturation and tree sizes. Plot and tree measurements were followed by sampling wood from different heights in each sample tree and laboratory measurements of wood properties. Mixed linear and non-linear prediction models were developed using diameters, number of annual rings and climatic indices as explanatory variables. The variation in spruce properties explained by these variables was: basic density 50%, latewood content 52%, juvenile wood diameter 85%, heartwood diameter 94% and bark thickness 76%. The corresponding values for pine were 59, 54, 79, 92 and 85%. Random among-tree variance was an important contributor to the remaining variation for density and latewood. In general, only a minor part of the random variation was related to variance between stands. Predictions derived from the models for density and juvenile wood in both species, and heartwood in pine showed good agreement when validated with data sets from two other studies. The resulting models may be used for predicting wood properties in forest planning and in bucking computers in harvesters, provided that the essential information is available. 相似文献
19.
20.
为考察杨木和辐射松树脂浸渍材的机械加工性能,参照LY/T 2054—2012《锯材机械加工性能评价方法》,分别对杨木和辐射松的素材与树脂浸渍材及其经过真空热处理的树脂浸渍材的刨削、铣削、钻削、开榫和车削5种机械加工性能进行测试评价。结果表明:1)本试验范围内,在综合评分满分40分情况下,杨木素材、树脂浸渍材和真空热处理树脂浸渍材的总评分分别为20分、30分和25分;辐射松素材、树脂浸渍材和真空热处理树脂浸渍材的总评分分别为24分、33分和29分;树脂浸渍材机械加工综合性能最佳,热处理树脂浸渍材次之;2)杨木和辐射松的树脂浸渍材及其真空热处理树脂浸渍材的刨削、铣削性能均为优秀,车削性能均为良好;杨木和辐射松的树脂浸渍材及辐射松真空热处理树脂材开榫性能良好;钻削性能仅辐射松树脂浸渍材达到优秀;3)辐射松素材与改性处理材的机械加工性能均优于杨木,综合比较,辐射松树脂浸渍材具有较佳的机械加工性能。 相似文献