应力波评价活立木材质的研究与进展

论述了应力波在活立木中传播的理论依据以及在检测活立木力学性质方面的研究进展,以一套典型的检测装置为例说明实际的检测方法,并对冲击应力波评价活立木力学性质的发展趋势进行了预测.     

基于应力波的活立木力学特性无损检测研究进展

活立木力学特性无损检测是科学评价森林质量的基础,为合理制定采伐作业时间、原木分级和木材高效利用提供有效依据.介绍应力波无损检测的基本原理以及基于应力波的活立木力学特性无损检测的研究进展,分析影响应力波在活立木中传播的因素,在此基础上阐述木材力学特性变化的原理以及基于应力波技术的木材力学特性季节动态变化检测的现状和意义,提出应力波检测活立木性质存在的问题,针对其存在的问题提出几点建议.     

樟子松活立木与原木及其板材应力波传播速度的相关性研究

对樟子松活立木、原木及其板材的应力波传播速度进行检测,得出活立木与原木的应力波传播速度非常接近;樟子松原木段与其板材的应力波传播速度具有较大的相关性,相关系数为R2=0.6,因此可以通过活立木的应力波传播速度来预测原木制成板材后的应力波传播速度。     

应力波用于木材和活立木无损检测的研究进展

在简单介绍应力波无损检测技术的基本原理、特点以及目前应力波主要的检测设备同时,对国内外应力波无损检测技术在木材和活立木领域的研究进展做了叙述,分析了现阶段应力波无损检测技术存在的问题,并对应力波无损检测技术进一步发展做了展望。     

人工林活立木材质应力波无损检测研究进展

应力波无损检测是检测和评估人工林活立木材质的主要手段之一。对该项技术的国内外研究进展情况进行了总结分析,指出这些研究主要集中在三个方面,即应力波传播机理研究、力学性能检测和预测研究,以及木材内部缺陷检测研究。     

东北林区典型树种内部心腐材积的量化检测

为分析活立木心腐材积损失变化规律及材积与胸径的关系,利用Arbotom应力波测试仪对带岭凉水国家自然保护区内红松(Pinus koraiensis)、旱柳(Salix matsudana)、山杨(Populus davidiana)、水曲柳(Fraxinus mand-schurica Rupr.)等4种活立木不同高度处144个断面的腐朽状况进行检测,获取每个断面的树干直径和应力波断层图像。根据应力波断层成像,筛选出存在心腐的断面共78个,利用Envi 5.0最大似然法对心腐断面进行分类并计算断面腐朽面积,据此模拟出活立木内部腐朽的立体模型,然后通过分区段求材积法估算其腐朽材积。在此基础上,对活立木心腐材积变化规律及材积与胸径的关系进行统计分析。结果表明:活立木心腐面积随高度的增加呈递减趋势;活立木心腐材积与胸径之间存在显著的正相关性(R=0.618,P=0.0000.01),胸径越大,活立木心腐材积比例也增大。     

木质材料无损检测的应用与研究进展

木质材料无损检测主要包括缺陷无损检测和力学性能无损检测两个方面,其无损检测基本方法主要有应力波法、机械应力变形法、振动法、微钻阻力法、射线法、雷达波法等。笔者先从检测原理入手对目前常见的木质材料内部缺陷和力学性能无损检测方法作了归纳,同时对木材和人造板内部缺陷和力学性能无损检测的应用和研究现状进行了归纳分析。木材和活立木无损检测技术发展较快,锯材和单板应力分等技术已有较为完善的检测设备,在发达国家已被广泛应用;古建筑木构件和活立木内部缺陷无损检测实际应用也较多,但在检测精度和效率提高方面仍有广阔的发展空间。人造板无损检测的研究近年来主要集中在力学性能检测方面,实际应用较少。对已经有较好应用的无损检测技术,下一步科研的目标应是进一步提高检测精度和效率;对尚处在科研探索阶段的无损检测技术,下一步仍应从基础理论完善和技术实现角度坚持工作。     

基于应力波和阻抗仪技术的旱柳内部腐朽定量检测

利用应力波和阻抗仪两种仪器对旱柳行道树内部腐朽情况进行检测,应力波法每个断面采用10~12个传感器,阻抗仪法每个断面测试2~4个方向。结果表明：由应力波断层扫描得到的二维图像和由阻抗仪得到的阻力曲线均能较准确地反映活立木内部腐朽的位置、程度等状况,两者对应关系较好;阻抗仪每个测试方向的平均阻力与相应方向应力波传播速度之间呈现一定相关性,相关系数 r ﹥0.5;每个测试断面上的整体平均阻力与应力波平均传播速度之间有显著的相关性,相关系数 r ＝0.817。这为联合两种仪器的检测结果制定一个表征立木腐朽程度的量化指标奠定了基础。     

电阻断层成像、应力波及阻抗仪3种无损检测方法对活立木腐朽程度的定量检测

【目的】应用电阻断层成像法、应力波断层成像法和阻抗仪法对活立木树干腐朽程度进行检测和定量表征,判断3种方法的可靠性,为野外立木健康情况检测提供基础数据和理论依据。【方法】在黑龙江省哈尔滨市东北林业大学试验林场内,选取水曲柳和北京杨各25株(15株腐朽,10株健康)共50株100个截面,采用PICUS Tree Tronic型树木电阻断层成像仪、Arbotom应力波断层成像系统和Resistograph针式阻抗仪检测及木芯质量损失率估测4种方法对断面腐朽程度进行检测和定量表征。以木芯质量损失率计算的样木腐朽程度(E_s)为真值,利用最小二乘法分别建立电阻测定的腐朽程度(E_d)、应力波测定的腐朽程度(E_y)及阻抗仪测定的腐朽程度(E_z)与真值(E_s)之间的线性关系。【结果】电阻断层成像、应力波和阻抗仪3种无损检测方法能在不同腐朽程度上表征活立木木材质量损失率;从整体上来看,电阻检测和应力波检测结果与腐朽程度真值的拟合程度低于阻抗仪检测结果与腐朽程度真值的拟合程度;从不同腐朽阶段来看,在E_s30%时,E_d和E_s的相关系数最高(R=0.823,P0.01);在30%≤E_s50%时,E_y和E_s的相关系数最高(R=0.658,P0.01);在E_s≥50%时,E_z和E_s的相关系数最高(R=0.914,P0.01)。【结论】电阻断层成像法对木材早期腐朽的检测比较敏感,而应力波断层成像法则相对在木材腐朽稍严重时更准确,阻抗仪法在腐朽各个阶段的检测结果都较为准确,且在腐朽严重时最准确,但会对木材造成微损伤。3种无损检测方法均能有效检测活立木腐朽,并有各自的特点,在实际腐朽检测中应根据实际检测需要来选择。     

弹性波层析成像技术检测活立木腐朽

介绍弹性波层析成像技术应用于活立木内部缺陷检测的研究现状,阐述弹性波的产生、传播途径和成像原理,总结该技术在应用中出现的问题.并使用弹性波层析成像技术对美国林务局纳西比特营地脂松活立木进行检测.结果表明:弹性波层析成像技术能够模拟出不规则树干形状并以二维图像方式直观地显示立木腐朽部位、程度、大小及形状等情况.基于此方法发展的设备,具有检测方便、有效、实用性强等特点.     

Browsing Damage on Pine (Pinus sylvestris and P. contorta) by a migrating moose (Alces alces) Population in Winter: Relation to Habitat Composition and Road Barriers

In Scandinavia, moose (Alces alces L.) sometimes cause severe browsing damage to economically-important pine. Moose-vehicle accidents have spurred construction of fences along roads, and these may interfere with moose migration between summer and winter ranges, or the road alone may be a barrier. If this happens and moose build up along roads, landowners may suffer economically. Therefore, this study investigated whether roads, fences or other factors influence the use of young pine stands by moose. Eighty stands along roads in northern Sweden were evaluated in which individually-browsed branches were counted on 9972 pines. Moose browsing was not significantly related to birch (Betula pendula Roth, B. pubescens Ehrh.) density, nor did it differ between pines (Pinus contorta Douglas or P. sylvestris L.). However, increased pine density, site productivity and proximity to a highway were associated with increased browsing. Further large-scale studies are needed to understand moose habitat selection and the effects of roads.     

Effects of Root Freezing on the Physiology and Growth of Picea glauca,Picea mariana and Pinus banksiana Seedlings Under Different Soil Moisture Regimes

The root systems of 2-yr-old Picea glauca, Picea mariana and Pinus banksiana seedlings were submitted to various frost temperatures during an artificial frost to induce different levels of root damage. Frost-damaged and control seedlings were placed in a greenhouse under high and low soil moisture regimes. Seedling growth and physiology were evaluated periodically. Seedling survival was reduced when root damage reached levels of 60-80%. Root systems of all three species showed partial to total recovery by the end of the experiment. In general, root freezing damage caused reductions in seedling growth, with these reductions becoming less significant over time. Root damage had little to no effect on black spruce and jack pine seedling physiology, while white spruce CO 2 uptake decreased with increasing root damage. Shoot nitrogen content of all three species decreased slightly with increasing root damage.     

Stand Structure in Pine,Spruce and Deciduous Forests: A Comparison Between Finnish and Russian Karelia

This study investigated the stand structure in pine, spruce and deciduous forests in the border district of Finland and Russia. A total of 46 mature forest stands was selected as pairs, the members of each pair being as similar as possible with respect to their forest site type, age, moisture and topography. The stands were then compared between the two countries by means of basal areas and number of stems. The proportions of dominating tree species were 2-12% lower, and correspondingly the proportions of secondary tree species higher, in Russian forests. The density of the forest stock was also higher in each forest type in Russia. The forests in the two countries differed most radically in terms of the abundance of dead trees. The amount was two to four times higher in Russian deciduous and spruce forests, and in pine forests the difference was 10-fold. The stand structures indicated that Russian coniferous stands, in particular, were more heterogeneous than intensively managed pine and spruce stands in Finland.     

Growth and Terminal Bud Formation in Picea abies Seedlings Grown with Alternating Diurnal Temperature and Different Light Qualities

The root collar diameter and the height:diameter ratio are of particular importance in container-grown seedlings where a high density in the containers may produce spindly seedlings. Temperature regimes and light quality are known to affect plant growth. The aim of this study was to identify responses in Picea abies (L.) Karst. seedlings grown with light providing different red:far-red ratios and under temperature regimes with alternating day (DT) and night temperature (NT) from negative (DT < NT) to positive (DT > NT) difference (DIF) between DT and NT. Experiments were conducted in controlled environment chambers and in a daylight phytotron. Only limited thermoperiodic responses appeared in P . abies seedlings with respect to seedling height and dry weight accumulation. The formation of terminal buds, however, was clearly delayed in seedlings grown at negative DIF. The results indicate a requirement for day extension light that is high in far-red, to prevent terminal bud formation under natural short-day conditions. An extended study should be conducted to clarify the minimum level of light intensity and the optimal light quality needed to prevent terminal bud formation under natural short-day conditions.     

CAD与建筑设计的关系

本文分析了CAD在设计中引起的正面和负面影响,并进行了系统的阐述,从而使设计者在应用中能够保持客观的态度。     

Natural Regeneration in Clear-cuts: Effects of Scarification,Slash Removal and Clear-cut Age

The effects of soil scarification (mounding), slash removal and clear-cut age on the natural regeneration in clear-cuts was evaluated using data from four sites in southern Sweden. The treatments were carried out during a good seed and establishment year for birch ( Betula pubescens Ehrh. and B. pendula Roth). Scarification had the strongest positive effect on the density of naturally regenerated seedlings, especially in birch, but also in pine ( Pinus sylvestris L.) and spruce [ Picea abies (L.) Karst]. Slash removal had a positive effect on birch density. No statistically significant effect of clear-cut age was found. In addition, no statistically significant interactions between clear-cut age and scarification or slash removal were found. The ingrowth of field vegetation was the fastest in areas that were not scarified, less rapid in areas scarified on old clear-cuts, and the slowest after scarification in fresh clear-cuts. In conclusion, it may be possible to control the density of birch during a good establishment year for birch. If birch is desired, the best combination of treatments is to remove the slash and scarify; otherwise, these treatments should be avoided.     

Risk Perception Among Non-industrial Private Forest Owners

Based on an enquiry, risk perception among non-industrial private forest owners is described in relation to climate change and forestry hazards. Of the respondents, 11% took action to remedy the effects of climate change. Out of a given set, hazards were ranked according to each respondent's experience of recent substantial financial loss to the estate and in relation to his or her willingness to make investments aimed at risk reduction. For each hazard, the respondent assessed the risk in four classes ranging from very high to negligible risk. Six hazards were considered most problematic in all three aspects: browsing damage, falling timber prices, damage by wind, spruce bark beetle, root rot and pine weevil. A majority of the respondents claimed to take action to reduce the risk associated with at least one hazard, while 35% did not know whether they did. Excluding climate change, the need for decision support was the largest in relation to damage by wind owing to a combination of perceived high risk and a high level of ignorance in relation to whether risk-reducing measures were taken.     

Interactions in decomposition and N mineralization between tropical legume residue components

In situ produced plant residues contain a mixture of different plant components of varying quality. To assess synergistic or antagonistic interactions occurring during the decomposition and mineralization of such mixtures, individual plant parts (stems, leaves, leaf litter and roots) or the mixture of stems, leaves and leaf litter of the agroforestry species pigeonpea (Cajanus cajan) or of crop residues of peanut (Arachis hypogaea) or of the weed hairy indigo (Indigofera hirsuta) were incubated in pots for 19 weeks. Periodically, remaining plant residues were sieved out (>2 mm), weighed and N content as well as soil mineral N determined. Above- and below-ground residues of peanut decomposed fastest and showed the largest N release in agreement with their high N concentration and low-acid detergent fibre (ADF) : N ratio. Hairy indigo was hypothesized to be of lower quality than pigeonpea because of its high-polyphenol content. However, it decomposed faster than pigeonpea, largely because of the higher N and lower lignin concentration of its components. Ranking of individual plant components for N mineralization resulted in the following pattern, leaves > leaf litter > roots > stems. In mixtures of the different plant components a similar species order in decomposition was obtained, e.g. peanut > hairy indigo > pigeonpea. The amount of N released from the mixture was dominated by stem material that comprised 46–61% of the mixture. The interactions in mixtures were relatively small for peanut (generally high-quality components) as well as for pigeonpea (low proportion of high-quality components, i.e. N rich leaf material). However, a positive interaction occurred during later stages of N mineralization in the mixture of hairy indigo as it had a significant proportion of N rich components and absence of highly reactive polyphenols. Thus, for plants with low to intermediate chemical quality attributes, manipulating plant composition (e.g. by varying harvest age, affecting stem and leaf proportions) will be important to obtain significant interactions during decomposition when its components are mixed.     

Pasture production and tree growth in a young pine plantation fertilized with inorganic fertilizers and milk sewage in northwestern Spain

The use of organic waste materials such as milk sewage as an organic fertilizer could have the dual advantages of organic-waste disposal and reduced dependence on inorganic fertilizers. The effects of fertilization with (1) conventional mineral fertilization, (2) milk sewage sludge at 40 kg N ha⁻¹ target rate and (3) no fertilization on pasture production and tree growth were examined in an experiment consisting of two pasture mixtures under a one-year-old Pinus radiata plantation with a density of 2500 trees ha⁻¹. The two pasture mixtures were: (1) Dactylis glomerata L. var. saborto (25 kg ha⁻¹) + Trifolium repens L. group Ladino (4 kg ha⁻¹) + Trifolium pratense L. var. Marino (1 kg ha⁻¹); (2) Lolium perenne L. var. Tove (25 kg ha⁻¹) + Trifolium repens L. group Ladino (4 kg ha⁻¹) + Trifolium pratense L. var. Marino (1 kg ha⁻¹). The experiment began in the spring of 1995 using a randomized block design with three replicates in Castro Riberas de Lea (Lugo, Galicia, north-western Spain). Plot size was 12 × 8 m², with a 1 m buffer strip between plots. Two-year data showed that fertilization with either material had a positive effect on pasture production, with no significant difference between the two fertilization treatments. Tree growth in the milk sewage sludge plot was significantly higher than in the control plots. Inorganic fertilization increased pasture production, but affected tree growth negatively. The results show that milk sewage sludge could be used as a fertilizer in silvo-pastoral systems. This revised version was published online in June 2006 with corrections to the Cover Date.