Synthesis and characterization of nanocrystalline CoWO4@silk fibers with antibacterial activity under ultrasound irradiation

The present investigation reports the novel synthesis of CoWO₄ nanoparticles@silk fiber under ultrasound irradiation. The effect of temperature, power of ultrasound irradiation and sequential dipping steps in growth of the CoWO₄ particles were studied. Results show a decrease in the particles size as the temperature and power of irradiation decreased. The fibers containing CoWO₄ nanoparticles were tested for their antibacterial efficacy against E. coli and S. aureus and were found to possess significant antibacterial activity. The results show the CoWO₄ nanoparticles@silk with strongest fluorescence characteristics can be obtained in this method. The physicochemical properties of the nanoparticles were determined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and fluorescence spectroscopy.     

Simultaneous synthesis of nano ZnO and surface modification of polyester fabric

In this study, synthesis of zinc oxide nanoparticles was carried out along with the hydrolysis of polyester fabric using sodium hydroxide to increase the surface activity and enhance the nanoparticles adsorption. The polyester fabrics were treated with zinc acetate and sodium hydroxide at different bath conditions, ultrasound and stirrer, resulting in formation of ZnO nanospheres and ZnO nanorods. The presence of zinc oxide with different shapes on the surface of the polyester fabrics was confirmed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Also, the X-ray diffraction patterns established the composition of wurtzite structure of zinc oxide. The self-cleaning property of treated polyester fabrics was evaluated through discoloring dye stain under sunlight irradiation. The antibacterial activities of the samples against two common pathogenic bacteria including Escherichia coli and Staphylococcus aureus were also assessed. The results indicated that the photocatalytic and antibacterial activities of the ultrasound treated polyester fabrics were superior compared to the stirrer treated samples.     

Antibacterial Coating of Glass Fiber Filters with Silver Nanoparticles (AgNPs) and Glycidyltrimethylammonium Chloride (GTAC)

Silver nanoparticles (AgNPs) were attached to glass fiber filters to improve their antibacterial properties using glycidyltrimethylammonium chloride (GTAC), a type of quaternary ammonium salt. The glass fiber filters treated with GTAC were placed into the Ag colloid and heat-treated at 43 °C for 90 min to attach AgNPs to the glass fiber filters. The glass fiber filters with the attached AgNPs were then analyzed by scanning electron microscopy and atomic force microscopy (AFM). The surface morphology of the glass fiber filters treated with GTAC and AgNPs was observed. The Ag atomic % of the glass fiber filters was analyzed according to the GTAC concentration, Ag colloid concentration, and AgNPs treatment temperature. The surface roughness of the glass fiber filters with the attached AgNPs was measured by AFM. The antibacterial tests of the GTAC and AgNP-treated glass fiber filters highlighted the sufficient antibacterial effects against E. coli, S. aureus, and P. aeruginosa. In particular, the antibacterial properties of glass fiber filters against S. aureus and P. aeruginosa were improved when the glass fiber filters were treated with both GTAC and AgNPs.     

Facile Fabrication of Durable Antibacterial Cotton Fabric Realized by Thioglycolic Acid and Silver Nanoparticles

In this study, durable antibacterial cotton fabrics were prepared by a simple two-step impregnation method. Firstly, thioglycolic acid (TGA) was grafted onto cotton fabric via esterification with the hydroxyl groups of cellulose, then silver nanoparticles (Ag NPs) were immobilized on the cotton fabric surface via coordination bonds with the TGA thiol groups. As a result, the mean size of Ag NPs coating on the cotton fabric is around 74 nm, and these functionalized cotton fabrics show superior antibacterial properties and excellent laundering durability. After withstand 50 laundering cycles, the obtained cotton fabrics still showed outstanding bacterial reduction rates (BR) against both S. aureus and E. coli, and the rates are all higher than 97 %. Therefore, this method to prepare antibacterial cotton fabric shows great potential applications in socks, cosmetic, and medical textiles.     

The study of coloration and antibacterial efficiency of corona activated dyed polyamide and polyester fabrics loaded with Ag nanoparticles

The aim of this study was to examine the influence of dyeing on antibacterial efficiency of corona activated polyamide and polyester fabrics loaded with colloidal Ag nanoparticles as well as the influence of the presence of Ag nanoparticles on the color change of dyed fabrics. C.I. Acid Green 25 and C.I. Disperse Blue 3 were used for dyeing of polyamide fabrics and C.I. disperse violet 8 for polyester fabrics. The color change of polyamide fabrics depends on the dye type, which was generally lower compared to polyester fabrics. Antibacterial efficiency of Ag loaded fabrics was tested against Gram-positive bacterium Staphylococcus aureus and Gram-negative bacterium Escherichia coli. Corona activated polyester and polyamide fabrics showed excellent antibacterial efficiency independently of order of dyeing and Ag loading. The morphology of fibers loaded with Ag nanoparticles was assessed by SEM and atomic absorption spectroscopy for elemental analysis.     

Preparation of electrospun LA-PA/PET/Ag form-stable phase change composite fibers with improved thermal energy storage and retrieval rates via electrospinning and followed by UV irradiation photoreduction method

In this paper, novel electrospun LA-PA/PET/Ag phase change composite fibers with different amount of Ag nanoparticles were prepared via the technique of electrospinning followed by UV irradiation method. The morphological structure, thermal energy storage properties, thermal energy storage and release rates of prepared LA-PA/PET/AgNO₃ and LA-PA/PET/Ag composite fibers were investigated by scanning electron microscope (SEM), high-resolution transmission electron microscope (HR-TEM), differential scanning calorimeter (DSC), and the measurement of melting and freezing times, respectively. The SEM images revealed that electrospun LA-PA/PET/AgNO₃ and LA-PA/PET/Ag composite fibers possessed the smooth morphologies with cylindrical shape. The corresponding average fiber diameters gradually decreased with increasing content of the AgNO₃ in the solutions, and slightly smaller than those of the LA-PA/PET composite fibers with oblate morphology and wrinkled surfaces. Yellow-brown coloration of electrospun LA-PA/PET/Ag phase change composite fibers were observed after UV irradiation treatment, which demonstrated that Ag ions were successfully reduced to Ag nanoparticles. The TEM images revealed that these reduced Ag nanoparticles were homogenously dispersed within the composite fibers. The results from DSC measurements indicated that the phase change temperatures and enthalpies of electrospun LA-PA/PET/Ag phase change composite fibers with different Ag content have not be influenced by the UVirradiation treatment. The thermal energy storage and release rates of electrospun LA-PA/PET/Ag phase change composite fibers were also improved due to the combination of reduced Ag nanoparticles. These UV-irradiated electrospun phase change composite fibers with excellent thermal energy storage properties can be acted as a novel form-stable PCMs for the applications related to storage and retrieval of thermal energy.     

Investigation on the Biodegradability and Antibacterial Properties of Nanohybrid Suture Based on Silver Incorporated PGA-PLGA Nanofibers

Polyglycolic acid-poly lactic glycolic acid (PGA-PLGA) electrospun nanofibers containing silver nanoparticles have been produced and twisted into the nanofibrous yarn. The morphology of nanofibers and produced yarns, as well as the mechanical properties of the yarns, were investigated. Furthermore, in vitro antibacterial properties and in vitro degradation behavior of yarns containing various silver nanoparticles were studied. SEM images confirmed that the addition of the silver nanoparticles into the polymer solution increases the fiber diameters. The result of the mechanical test of the yarns alone and used in two different forms of the knots was measured and results showed that the strength of the yarns without the knot was significantly more than that of others. The biodegradability test showed that the mechanical properties and the weight of the yarns were quickly reduced after subjecting to in vitro condition. The result of the antibacterial test indicated that the nanofiber yarns containing %3 silver nanoparticles were the most appropriate sample with a considerably antibacterial activity against both gram-positive bacterium Staphylococcus aureus and gram-negative bacterium Escherichia Coli with inhibition zones of 8.1 and 9.5 mm, respectively; which demonstrated that silver nanoparticles retained their effectiveness after the electrospinning process. Therefore the nanofibrous yarns containing silver nanoparticles could be successfully produced by the electrospinning process with the proper antibacterial property as a candidate for the surgical sutures.     

Effect of UV irradiation on cellulase degradation of cellulose acetate containing TiO<Subscript>2</Subscript>

Cellulose acetate (CA) films containing anatase type titanium dioxide (TiO₂) nanoparticles were prepared by solution casting. The film surface was modified by UV irradiation using a grid type UV irradiator. The UV irradiation caused slight increase in photodegradation of the CA films with TiO₂ compared to the CA film alone. However, CA films irrespective of TiO₂ content did not show a significant enzymatic degradation by a cellulase fromAspergillus niger without UV irradiation. Upon UV irradiation, the biodegradability remarkably improved even in the CA film without TiO₂. The irradiation of CA films decreased both the water contact angle and the degree of substitution (DS) implying the decrease in acetyl groups of the CA film surface due to the photo-scission of the acetyl group and photooxidation, resulting in more facile biodegradation of the surface film layer. The substantial enhancement in biodegradation of the UV irradiated CA film containing TiO₂ was attributed to the increased hydrophilicity, lowered DS and zeta potential due to the photoscission and the photooxidation effect of UV light. Also the increased surface area of the CA film due to the photocatalysis of TiO₂ particles may encourage the facile biodegradation.     

Antibacterial effect of carbon nanofibers containing Ag nanoparticles

Silver nanoparticles imbedded in polyacrylonitrile (PAN) nanofibers and converted into carbon nanofibers by calcination was obtained in a simple three-step process. The first step involves conversion of silver ions to metallic silver nanoparticles, through reduction of silver nitrate with dilute solution of PAN. The second step involves electrospinning of viscous PAN solution containing silver nanoparticles, thus obtaining PAN nanofibers containing silver nanoparticles. The third step was converting PAN/Ag composites into carbon nanofibers containing silver nanoparticles. Scanning electron microscopy (SEM) revealed that the diameter of the nanofibers ranged between 200 and 800 nm. Transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) showed silver nanoparticles dispersed on the surface of the carbon nanofibers. The obtained fiber was fully characterized by measuring and comparing the FTIR spectra and thermogravimetric analysis (TGA) diagrams of PAN nanofiber with and without imbedded silver nanoparticles, in order to show the effect of silver nanoparticles on the electrospun fiber properties. The obtained carbon/Ag composites were tested as gram-class-independent antibacterial agent. The electrosorption of different salt solutions with the fabricated carbon/Ag composite film electrodes was studied.     

In vitro assesment of antimicrobial activity and characteristics of polyamide 6/silver nanocomposite fibers

In this study, the preparation method and characteristics of silver (Ag) nanoparticle (NP) loaded polyamide 6 (PA6) nanocomposite and its antimicrobial activity against Klebsiella pneumonia and Staphylococcus aureus were investigated. The melt intercalation method was used to prepare a series of PA 6 nanocomposite fibers containing, 0; 1; 3; 5 % (wt.) Ag. PA6/Ag nanocomposite fibers exhibit increased antimicrobial efficiency with the increase of nanoparticle contents. On the other hand, thermal characterization tests show that the increased concentration of Ag nanoparticles reduces the mechanical properties due to their partial agglomeration leading to flaw generation. The crystallinity of the fibers was found to decrease about 10 % with increase of Ag to 5 %. This was attributed to faster cooling rate experienced in the presence of high thermal conductivity Ag particles.     

Synthesis of silver nanoparticles with sericin and functional finishing to cotton fabrics

This research presents a novel strategy to fabricate multi-functional cotton textiles. In this study, silver nanoparticles-sericin (Ag NPS-sericin) hybrid colloid has been prepared using sericin as reducing agent and dispersing agent. Cotton fabrics was oxidized selectively with sodium periodate (NaIO₄) to generate oxidized cotton fabrics, and which has then been finished using Ag NPS-sericin hybrid colloid prepared to obtain multi-functional cotton textiles. The finished cotton fabric not only possessed excellent antibacterial activity, but also it was modified functionally by sericin protein, which endowed antibacterial cotton fabrics relatively smooth surface and good wear ability. Fourier transform infrared spectrogram confirmed that sericin protein was grafted onto cellulose fibers. Ag NPs were characterized by UV-Vis spectroscopy, transmission electron microscope (TEM) and X-ray powder diffraction (XRD). The results of SEM, X-ray photoelectron spectroscopy (XPS) and EDS confirmed that silver nanoparticles and sericin been loaded successfully on the surface of cotton fabrics. The antibacterial experiments showed bacterial reduction rates of S.aureus and E.coli were able to reach above 99 %. After washing 20 times, it showed still good antibacterial activity at over 95 % against S.aureus and E.coli.     

Size-controlled nanoparticles of poly(acrylonitrile-<Emphasis Type="Italic">co</Emphasis>-methyl methacrylate) for moisture-absorbing heat release applications

Hydrophilic and water-insoluble poly(acrylonitrile-co-methyl methacrylate) [P(AN-co-MMA)] nanoparticles were prepared to investigate their moisture-absorbing heat release effect. The nanoparticle size was controlled by varying the composition of AN and MMA. First, P(AN-co-MMA) nanoparticles were synthesized by emulsion polymerization, followed by cross-linking with hydrazine for water insolubility. Secondly, the hydrazine-cross-linked P(AN-co-MMA) nanoparticles were hydrolyzed in an aqueous NaOH solution to form hydrophilic groups. The hydrolyzed and cross-linked P(AN-co-MMA) [hc-P(AN-co-MMA)] nanoparticles had a more uniform and smaller particle size with increasing MMA content compared to the PAN nanoparticles, this is due to decreasing polar nitrile groups in the P(AN-co-MMA) with MMA content. A nanoparticle size less than 45 nm was obtained for P(AN-co-MMA) with a 20 mol% MMA content. The hc-P(AN-co-MMA) nanoparticles showed a temperature rise maximum of up to 12.9 °C in the moisture-absorbing heat release test. In addition, when the nanoparticles with 20 mol % MMA content were coated on cotton fabrics, the temperature of the fabrics increased by up to 7.8 °C at 90 % relative humidity. This demonstrates that the nanoparticles can be applied as a potential moisture-absorbing heat release material.     

Functional electrospun cellulosic nanofiber mats for antibacterial bandages

Functionalization of cellulosic nanofibers was established to develop antibacterial bandages. The functionalization was conducted through preparation of carboxymethyl cellulose (CMC) containing different metal nanoparticles (MNPs) such as copper nanoparticles (CuNPs), iron nanoparticles (FeNPs) and zinc nanoparticles (ZnNPs). Fourier Transform Infrared spectroscopy was used to characterize CMC containing MNPs and scanning electron microscopy coupled with high energy dispersive X-ray (SEM-EDX) to study the surface morphology of CMC with and without MNPs. Furthermore, back scattering electron detector was used to show the position of metal nanoparticles on the microcrystalline CMC. In addition, UV-visible spectroscopy was used to confirm MNPs formation. Nanofiber mats of CMC containing MNPs were synthesized using electrospinning technique. Surface morphology of electrospun CMC containing MNPs was characterized using SEM. The obtained data revealed that elctrospun CMC nanofibers containing MNPs were smooth and uniformly distributed without bead formation. The average fiber diameters were in the range of 150 to 200 nm and the presence of MNPs in the nanofiber did not affect the size of the electrospun nanofiber diameter. Transmission electron microscopy (TEM) images displayed that MNPs were existed inside and over the surface of the electrospun nanofibers without any agglomeration. The average particle diameters of MNPs were 29-39 nm for ZnNPs, 23-27 nm for CuNPs and 22-26 nm for FeNPs. Moreover, Water uptake of electrospun nanofiber mats and the release of MNPs from nanofibers were evaluated. Nevertheless, electrospun CMC nanofibers containing MNPs had an excellent antibacterial activity against Gram-negative bacteria Escherichia coli and Gram-positive bacteria Staphylococcus aureus.     

Antimicrobial gelatin nanofibers containing silver nanoparticles

Gelatin is one of the most promising biomaterials due to its excellent biocompatibility and biodegradability. In order to improve the antimicrobial activity of gelatin, gelatin nanofibers containing silver nanoparticles were prepared by electrospinning gelatin/AgNO₃/formic acid system, followed by UV irradiation. They were characterized by UV-visible spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction analysis. It was observed that the silver nanoparticles, which presented quasi-sphere shaped and 9–20 nm average diameters, were generated on the surface of the gelatin nanofibers. The size of the silver particles can be adjusted by changing the content of AgNO₃. With increasing the amount of AgNO₃, the average diameters of fibers decreased. The gelatin-Ag nanocomposites were found effective against Staphylococcus aureus and Pseudomonas aeruginosa. From these results, it is expected that the electrospun antimicrobial gelatin nanofiber mat can be used as an excellent wound dressing.     

A study of hybrid organic/inorganic hydrogel films based on in situ-generated TiO2 nanoparticles and methacrylated gelatin

Methacrylated gelatin films with in situ-generated TiO₂ nanoparticles containing varying weight percentages of gelatin (0 %, 0.5 %, 1 %, 2 % and 4 %) were successfully prepared as novel biomaterials. ¹H-NMR spectroscopy confirmed their methacrylation with a 79 % degree of substitution. TiO₂ nanoparticles were uniformly distributed in the films with the average particle size increasing from 85 to 130 nm in proportion to an increase in TiO₂ concentration from 0.5 to 4 wt%. The water absorption of various gelatin methacrylamide/TiO₂ films was in the range of 471–758 %, which was enough to prevent wound beds from exudates accumulation. And in vitro degradation test in PBS showed that the three-dimensional structure of all samples basically remained unchanged although more than or nearly half the mass of specimens decreased after 4 weeks’ degradation, and the pH levels of all sample solutions were maintained in an adequate range of 6.5–7.4 for cell and tissue growth during the whole process. The antibacterial activities of the films against E. coli and S. aureus were measured via a shake flask test and demonstrated good performance after the importation of TiO₂ nanoparticles. Cytotoxicity testing revealed that all films had no cytotoxicity and showed favorable adherence in the presence of L929 cells. The results suggest that hybrid hydrogel films hold potential for antibacterial wound dressing and tissue engineering scaffold applications.     

<Emphasis Type="Italic">In situ</Emphasis> deposition of silver nanoparticles on the cotton fabrics

A novel method was developed to prepare the antibacterial cotton fabrics through in situ deposition of silver nanoparticles on the cotton fabrics by the reduction of Ag⁺ without any reductant and dispersant. The data showed that by immersing the cotton fabrics in 160 mM AgNO₃ solution at 90 °C, the amount of silver nanoparticles was increased from 0.6890 to 1.3561 mg per gram of fabrics with the increase of reaction time from 10 to 50 min. The obtained cotton fabrics showed excellent antibacterial activity and laundering durability, in which the bacterial reduction was still 98.5 and 94.3 % to Escherichia coli and Staphylococcus aureus, respectively, even after the fabrics were washed for 20 cycles. Thus, this facile in stitu reduction method without any other reducers or stabilizers may bring a promising and green strategy to produce functional cotton fabrics.     

Electrospun grape seed polyphenols/gelatin composite fibers contained silver nanoparticles as biomaterials

GSP/gelatin composite nanofiber membranes containing silver nanoparticles were successfully fabricated as a novel biomaterial by electrospinning. The silver nanoparticles (AgNPs) were synthesized with the grape seed polyphenols (GSP) as reducing agent in aqueous solution of gelatin, and then the GSP/gelatin/AgNPs mixed solution was electrospun into nanofibers at 55 °C. The scanning electron microscopy (SEM) confirmed that the composite fibers were uniform and the average fiber diameter ranged between 150 nm and 230 nm with an increase in applied potentials from 14 kV to 22 kV. And the transmission electron microscopy (TEM) showed that silver nanoparticles distributed individually in the fibers with the average particle size of about 11 nm. Furthermore, the ultraviolet visible spectrophotometer (UV-vis spectroscopy) test demonstrated that all of Ag⁺ converted to Ag⁰ when the concentration of gelatin was 24 wt% and the mass ratio of GSP to AgNO₃ was about 5:2. The antibacterial activities of the fiber membranes against E.coli and S.aureus were measured via a shake flank test and demonstrated good performance after the importation of silver nanopaticles. Cytotoxicity testing also revealed that fiber membranes contained silver nanoparticles had no cyto-toxic. All the results indicated that the GSP was effective for the formation and stabilization of silver nanoparticles in composite nanofibers mats which had the potential for applications in antimicrobial tissue engineering and wound dressing.     

Functional Antibacterial Finishing of Woolen Fabrics Using Ultrasound Technology

The growing concern for the personal health and hygiene has created the necessity of acquiring wool fabric antibacterial activity. Silicon dioxide nanoparticles (SiO₂ NPs) have appropriate features to enhance the functional properties of wool fabrics, especially with polymer application. In this study efficient coating using polyethylene glycol (PEG₂₀₀₀) and SiO₂ NPs were used for imparting antibacterial properties to treated fabrics. All the treatments were carried out using both conventional and ultrasound techniques. The physical and chemical properties were evaluated using FTIR, XRD, and SEM. The result indicated that treated wool fabrics by PEG/SiO₂ NPs improved the dyeability and antibacterial of the fabrics and also enhanced its mechanical properties. Furthermore, it is believed that the ultrasound radiation causes homogeneous distribution of cross-links and polymerization throughout the wool surface. This offers considerable advantages compared to conventional treatment.     

Investigation of mechanical properties of developed antimicrobial PPsuture/Ag nanocomposite

In order to prevent surgical complications due to microbial infections, we have developed polypropylene suture grafted with silver nanoparticles (PPsuture/Ag nanocomposite) by a simple immersion procedure. Physical and mechanical properties of developed suture are investigated. Suture surface characteristics are examined by scanning electron microscopy (SEM) imaging and atomic force microscopy (AFM). Silver content on suture surface was determined by Inductively coupled plasma atomic emission spectroscopy (ICP-AES). The mechanical properties of developed antibacterial PP suture/Ag were studied. We note that proposed silver coating method has not affected mechanical performances of suture. Antimicrobial performances of PP suture/Ag nanocomposites against S. aureus and E. coli colonies were also investigated.     

Antibacterial cotton fabric with enhanced durability prepared using L-cysteine and silver nanoparticles

L-cysteine (Cys) and silver nanoparticles (Ag NPs) were successfully linked onto the cotton fabric surfaces. The Cys molecules were covalently linked to the cotton fibers via esterification with the cellulose hydroxyl groups, and the Ag NPs tightly adhered to the fiber surface via coordination bonds with the Cys thiol groups. As a result, the Ag NPs coating on the cotton fabric showed an excellent antibacterial function with an outstanding laundering durability. The bacterial reduction rates (BR) efficiency reached 100 % for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). After 50 consecutive laundering cycles, the bacterial reduction rates (BR) against E. coli and S. aureus were maintained over 97 %. It has potential applications in a wide variety of fields such as sportswear, socks, and medical textile.