Cellulose content as a selection trait in breeding for kraft pulp yield in Eucalyptus urophylla

? The aim of this study was to investigate the effectiveness of using cellulose content, measured by the diglyme-HCl method, as a selection trait in breeding programs for kraft pulp yield in Eucalyptus urophylla.

? A total of 275 trees from sixty-two families were sampled from a thinned progeny trial of E. urophylla in northern Vietnam to evaluate cellulose content from breast-height increment cores. Among those, twenty unrelated trees were felled to evaluate cellulose content and pulp yield from breast-height disk samples.

? The regression of pulp yield of disk samples on cellulose content was strong either from disks (R ² = 0.83) or increment cores (R ² = 0.69). There was no significant difference in cellulose content between the provenances. The narrow-sense within-provenance heritability of cellulose content was 0.50 and the coefficient of additive genetic variation was 3.9%. Genetic correlations between cellulose content and growth (0.28–0.45) or wood basic density (?0.02) were not significantly different from zero.

? Breast-height increment core cellulose content measured by diglyme-HCl method is under strong genetic control and can be used to rank trees for pulp yield in E. urophylla plantations. Selection for increased cellulose content would have only minor effects on growth and wood basic density.

     

Effects of genetic entry and competition by neighbouring trees on growth and wood properties of cloned Norway spruce (Picea abies)

? The aim of this work was to study both the effects of genetic entry and competition by neighbouring trees on growth, yield, wood density traits and fibre properties of 20 Norway spruce clones grown in an experimental trial located in southern Finland. The material included 10 Finnish clones, 2 Russian clones and 8 provenance-hybrids clones, the latter ones representing crosses between Finnish and foreign parent trees.

? We found that, compared to growth and yield, wood density traits and fibre properties showed, on average, lower phenotypic variations. Moreover, significant differences could be observed among the clones regardless of the trait (p < 0.05). Conversely, on average, no clear differences could be found between Finnish, Russian and provenance-hybrids clones in most of the studied traits.

? The marked differences among the clones, and lack of clear differences among the provenances suggested that any ranking, regarding different traits, should be based on individual clones. The phenotypic correlations between different traits ranged from moderate to strong suggesting that selection based on one trait would affect other traits. Regardless of clone, the growth of trees (e.g. breast height diameter) decreased and the wood density increased with increasing competition by neighbouring trees, which was expressed by competition index.

     

Correlations and clines in tree growth and wood density of <Emphasis Type="Italic">Balanites aegyptiaca</Emphasis> (L.) Delile provenances in Niger

Balanites aegyptiaca (L.) Delile provides wood and other essential products for farming and pastoralist communities in the West African Sahel. In this region, mean annual rainfall decreases in general from south to north and from west to east, so one might expect clinal variation in fitness-related traits in relation to the rainfall gradients. This paper presents results from a provenance/progeny test of 11 provenances sampled in Niger and established at one relatively dry site in Niger. The objectives were to evaluate phenotypic correlations (Pearson r) between tree growth (height, stem diameter) and basic density of the wood, and clines in growth and density at 13 years. Tree growth and wood density were positively correlated, and the correlations differed among provenances. Mean tree height and stem diameter of provenances increased, in general, from the more humid to the drier parts of the sample region. Results suggest that selection of faster-growing trees could lead to an increase in wood volume and density in the subsequent generation, especially in certain provenances; that provenances from drier areas are better adapted to drought; and that tree improvement and conservation programs should collect seeds from populations in the drier areas for planting and conservation.     

Variation in the decay resistance of larch to fungi

? Decay resistance of larch (Larix sp.) to fungi was evaluated on heartwood samples belonging to 3 species (L. decidua, L. kaempferi and their hybrid), 3 races of European larch (polonica, sudetica and alpine), 13 wood lots (populations) and 313 trees.

? Larch wood appeared, on average, as moderately durable although a high variability was observed. At the sample level as well as at the mean individual tree level, durability ranged from class 1 to 5 according to EN 350-1 standard. At the population level, larch wood varied from ‘durable’ to ‘slightly durable’. Genetics played a major role in decay resistance at the species, provenance and tree levels. Environmental factors such as the position of heartwood samples and the age of trees were also identified as a source of variability.

? The most durable wood was not necessarily from old native alpine stands of European larch: some young larches from faster growing lowland origins also produced durable wood.

? Genetic improvement of larch wood durability appeared therefore likely by the selection of the best populations for decay resistance as well as from the selection of individuals.

     

High resolution temporal variation in wood properties in irrigated and nonirrigated Eucalyptus globulus

? Environmental determinants of wood properties variation were examined in Eucalyptus globulus, a globally important hardwood plantation species, in southern Tasmania, Australia.

? Radial variation in wood properties, measured with the SilviScan system, were re-scaled from distance to time abscissa using stem radial growth data measured with dendrometers. With this re-scaled data it was possible to evaluate how water availability and temperature affected wood density, microfibril angle (MFA) and fibre and vessel transverse dimensions in irrigated and non-irrigated trees.

? Wood density, fibre radial diameter and MFA were sensitive to water availability. Wood density increased and fibre radial diameter decreased in response to reduced water availability. When high water availability was maintained, wood density was negatively correlated with temperature. Together, temperature and soil matric potential explained about 60% of temporal variation in wood density variation. In contrast MFA was not related to temperature but decreased with increasing water stress. Slower growing trees also had lower MFA than faster growing trees. Slower growing trees had a larger number of vessels per unit area of wood than faster growing trees within this even aged stand. However, vessel radius to the 4th power was significantly higher in faster growing trees than in slower growing trees.

? Overall, E. globulus wood properties were sensitive to temporal changes in environmental conditions (particularly water availability) and associated growth rates. The data provided support for the hypothesis that growth rates are hydraulically mediated.

     

Physical properties of wood in thinned Scots pines (Pinus sylvestris L.) from plantations in northern Spain

? The physical properties of wood and the associated variations within and between trees were evaluated by analysing 770 small specimens of clear wood from 11 Pinus sylvestris L. trees thinned from 3 plantations.

? Within-tree variations in basic density or volumetric shrinkage increased with cambial age and decreased with increasing ring width. The effect of the height in the stem on wood properties was considered indirect and height was not included as an explanatory variable in the mixed models proposed to estimate basic density and volumetric shrinkage.

? The models had random components for the intercept parameter and explained 52.5% of the total variance in basic density and 56% of the total variance in volumetric shrinkage. Linear shrinkage in the direction of the grain was extremely variable.

? Between-tree variation and between-plot variation in the physical properties of wood were high, considering that all trees sampled were growing in similar sites and stands. It would then be desirable to predict physical properties of wood on living trees in order to use the quality of wood as a criterion for timber tree selection in thinnings.

     

Coastal and interior Douglas-fir provenances differ in growth performance and response to drought episodes at adult age

Context

Since the 2003 drought and heat wave, Douglas-fir dieback has been reported in France in trees older than 30 years. Consequently, it is questioned whether selected Douglas-fir provenances are suited to the frequent and severe drought events which are forecast due to climate change.

Aims

Our objective was to contribute to the screening of variability in productivity and growth response to soil-water deficit of mature trees from provenances not currently used for plantation in France.

Methods

We sampled 22 provenances, including coastal and interior Douglas-fir, covering a wide part of its natural distribution, from Oregon to California for coastal provenances and from British Columbia to New Mexico for interior provenances. These provenances were planted at the mid 1970s in two provenance trials located in the south-west area of France. Variability of productivity, of wood density, and of radial growth in response to drought episodes among provenances was quantified and related to soil-water deficit computed by daily water balance calculations.

Results

Whatever the provenance, annual radial growth is highly dependent on local soil-water deficit (Felines R ² = 0.57, Le Treps R² = 0.49). Radial growth and wood properties exhibit large differences between provenances at 30 years old. Variability between provenances for all wood characteristics studied is mainly structured geographically. Coastal provenances perform best for productivity at 30 years old (619 cm²?±?59), and exhibit a small growth reduction in 2004, the second successive year of drought (?10.7 %?±?3.8). Surprisingly, the southern interior provenances from the driest environments in the natural range show a large growth reduction in 2004 (?30.5 %?±?5.2).

Conclusions

The provenances tested exhibited significant differences in growth performance and growth reduction induced by the soil-water deficit. The approach coupling retrospective analysis of radial growth on mature trees and water balance modelling is relevant for evaluating provenance adaptation to more frequent or severe drought episodes.     

Coastal Douglas-fir provenance variation: patterns and predictions for British Columbia seed transfer

? We evaluated performance variability in two series of provenance trials of Pseudotsuga menziesii var. menziesii. EP 480 included 16 reciprocal provenances planted from British Columbia to Oregon, measured up to age 45. EP 599.03 featured five common provenances, plus the local source, planted at 23 British Columbia sites, measured up to age 33.

? Although residual variance was high, site accounted for 31 to 60% of the volume variance, while provenance accounted for 1–6%. Interactions were also significant across ages and trials. Genotype-environment interaction was evident in EP 599.03, but not EP 480, which may reflect differences in experimental design.

? The worst provenances always ranked low across sites and over time. No geographic or climatic (annual, seasonal, monthly) variables consistently explained patterns of volume across sites or ages, singly or in combination for either trial, similar to findings from other studies of coastal Douglas-fir. Provenances from Washington to central Oregon often performed as well as the local provenance or better at British Columbia trial sites. Populations from higher elevations, poor sites and submaritime provenances were less vigorous.

? Results support maintaining elevational and ecotypic transfer limits, emphasizing site-specific decision making, and permitting wider latitudinal transfer on similar quality sites.

     

Growth and survival of Prosopis africana provenances tested in Niger and related to rainfall gradients in the West African Sahel

Prosopis africana (Guill., Perrott. and Rich.) Taub. is important for farming and pastoralist communities in the West African Sahel. It provides a range of essential products (wood, fuel, food, fodder and medicines) and services (soil fertility improvement), and is one of many native tree species maintained in the traditional agroforesty system, known as the parkland. However, this and other valuable species are disappearing in many parts of the region due to over-exploitation and, perhaps, due to increasingly drier conditions in the region. A provenance/progeny test (275 families from 28 provenances in Burkina Faso and Niger) was established at one location in Niger to investigate geographic variation in the species. Mean annual rainfall decreases from south to north and from west to east in the seed collection area. Given these gradients, one would expect clinal variation in growth and survival of P. africana and other tree species that occur naturally in the region. Tree growth (height, number of primary branches, stem diameter at 20 cm and 1.3 m) and survival were analyzed at 11 years. Variation due to provenances was significant for growth variables and almost significant for survival. Variation due to families within provenances was not significant for any variable. Provenance means for growth and survival increased from the more humid to the drier parts of the sample region. The clines in growth and survival with regional rainfall patterns suggest that tree improvement and conservation programs should collect seeds from populations in the drier zones for planting and conservation in the West African Sahel. This may be particularly important when one considers the trend in global warming.     

Diminished vessel diameter as a possible factor in the decline of European ash (Fraxinus excelsior L.)

? The aim of this work was to examine the anatomy and functioning of secondary xylem in stems in relation to the decline of European ash (Fraxinus excelsior L.).

? We tested the hypothesis that declining trees show changes in the structure of wood, which result in impaired water transport.

? Anatomical analyses were carried out on wood samples (comprising all annual rings formed during the 30 years life of the analysed trees) collected at breast height from the main stem of healthy, weakened and dead ash trees. The width of annual wood increments, the diameter and density of earlywood vessels were measured and the theoretical hydraulic conductivity index through the secondary xylem calculated by application of Hagen-Poisseuille’s formula.

? Anatomical characteristics changed both with the age of trees and in response to unfavorable factors. The largest vessels were observed in healthy trees, which implied that they had the highest hydraulic conductivity index, whereas trees considered to be in decline produce smaller vessels and hence had reduced conductivity.

     

Variation in the natural termite resistance of teak (Tectona grandis Linn. fil.) wood as a function of tree age

? Tree age is one of the most important factors to affect the natural durability of wood.

? The purpose of this study was to determine the natural termite resistance of heartwood and sapwood of teak (Tectona grandis Linn. fil.) for trees aged 8, 30 and 51 years. Reticulitermes speratus Kolbe was employed as a test termite using a no-choice feeding method.

? The heartwood and sapwood of all of the trees tested exhibited antitermitic activity. Based on the mean mass loss due to termite activity, the sapwood and heartwood regions of 8-year-old trees are the most susceptible to termites while the heartwood regions of the 30-year-old trees showed termite resistance similar to the termite resistance of 51-year-old trees.

? The mass loss is moderately correlated with n-hexane extractive content, total extractive content, brightness and redness of the wood.

     

Effects of site on fibre, kraft pulp and handsheet properties of Eucalyptus globulus

? Eight-year old trees from two Eucalyptus globulus Labill. clones planted across three different sites in Tasmania, Australia, were sampled for wood and kraft pulp/handsheet properties.

? Site had a significant effect on all measured properties. Compared with the poor site (Parkham) the wood from the good site (West Ridgley) had on average 11 % lower wood density. The poor site had also greater microfibril angles, shorter fibres at lower pulp yields.

? The handsheets produced with pulp from the poor site resulted in comparatively higher bulkiness, lower burst, lower tear and tensile indices, lower zero span tensile strength, but higher opacity, higher light scattering and higher surface roughness. Significant height effects were found with all wood properties, and also with tear index, zero span tensile strength and opacity.

? Discriminant analysis showed that for 76 out of 100 handsheets the raw material source, i.e. growth site, could be predicted correctly using a set of handsheet properties with tear index and bulk index being most prominent.

? This is unique evidence that site conditions are strongly reflected in handsheet properties produced from Eucalyptus pulp.

     

Genetic parameters for early wood and latewood densities and development with increasing age in Scots pine

? Each annual ring in pines consists of earlywood and latewood with considerable difference in density and width. To get a better determination of the genetic regulation of total wood density in Scots pine (Pinus sylvestris L.), density and width of those ring sections were measured in annual ring numbers 12 to 21 of Scots pines in a full-sib progeny test. Tree height and stem diameter were also measured.

? Heritabilities for the annual ring sections increased with age for earlywood density from 0.08 to approximately 0.25; latewood density showed similar reductions. Heritability over all 10 annual rings was 0.25 for earlywood density, 0.22 for latewood density, 0.29 for height and 0.10 for stem diameter. Genetic correlations between earlywood and latewood density and growth traits were negative, while they were strongly positive between densities of adjacent annual rings (0.70–1.0).

? Despite the higher heritability of earlywood density, the strong positive genetic correlation between those traits indicates little benefit from focusing solely on earlywood density when selecting for wood density. Analysing earlywood and latewood separately does not benefit from including the width of the corresponding ring section as a covariate. Juvenile wood may possibly turn into mature wood 15–20 y from the pith.

     

Non-destructive monitoring of early stages of white rot by Trametes versicolor in Fraxinus excelsior

? Non-destructive detection of fungal decay in living trees is relevant for forest management of valuable species, hazard tree assessment, and research in forest pathology. A variety of tomographic methods, based on stress wave timing, radioactive radiation, or electrical resistivity have been used to detect decay in standing trees non-destructively. But apart from mobile gamma ray computed tomography (Habermehl and Ridder, 1993) which is virtually unavailable, the detection of incipient stages of decay is still not possible.

? Wood moisture and electrolyte content influence the electric resistivity of wood. Both are changed by fungal decay. Therefore electric resistivity tomography (ERT) should detect decay in its early stages. Then it could be used to monitor the spatial and temporal progress of degradation.

? We infected four Fraxinus excelsior trees with Trametes versicolor using wooden dowels and measured two-dimensional electric resistivity tomograms 3, 10, 13 and 21 months after infection. Immediately after the last electric resistivity measurement trees were felled for further analyses of stem cross-sections. Wood moisture content and raw density had significantly increased in infected areas, but dry density had not significantly changed after 21 months. Areas of very low electric resistivity around the infected wounds correlated very well with infected wood in the stem cross-sections. Increasing areas of low electric resistivity around the infected wounds during consecutive measurements indicate increasing areas of infected wood.

? We conclude that the growth of white rot by Trametes versicolor can be monitored with electric resistivity tomography (ERT) beginning from incipient stages, even before wood density decreases. ERT could therefore be a powerful research tool for decay dynamics as well as a method for diagnosing wood decay in forestry and arboriculture.

     

Genetic parameters for grain angle in 28-year-old Norway spruce progeny trials and their parent seed orchard

? Sawn wood which acquires twist during drying is a substantial problem for the sawmill industry and is to a large extent caused by spiralled grain in the tree.

? In this study, the feasibility of using spiral grain angles as a selection trait in Norway spruce (Picea abies (L.) Karst) tree breeding and the extent of grain angle and its breeding values were investigated. Grain angles under bark and diameter were measured at breast height in three 28-year-old Norway spruce progeny trials and in their parent seed orchard.

? The mean grain angle value was 1.76° in the progeny trials and 1.84° in the seed orchard. Estimated genetic standard deviations for grain angle were almost 1°. Progeny trial heritabilities (H ² > 0.3) were larger than the seed orchard heritability (H ² = 0.24). Genotype by environment interaction among the progeny trials was negligible for grain angle. Progeny trial grain angles exhibited genetic correlation with seed orchard grain angles in the range 0.66 to 0.84.

? Thus, mature wood grain angles are also under considerable genetic control, raising the opportunity to reduce the occurence of left-grained trees, which are prone to producing twisted wood.

     

Effects of the lateral growth rate on wood quality of Gmelina arborea from 3.5-, 7- and 12-year-old plantations

? Awareness of the shortage of fossil resources leads to an increasing demand for woody biomass. We investigated the feasibility of using fast-growing Gmelina arborea wood for material production. Gmelina arborea wood samples were collected from trees of varying cambium ages in Indonesia, from 3.5-, 7- and 12-year-old plantations.

? The lateral growth rate and the cambium age did not significantly affect the longitudinal released strain of the growth stress, xylem density, or microfibril angle at the outermost surface of the secondary xylem at any sampling site. However, fiber length in the 3.5-year-old plantation tended to be shorter in smaller diameter trees, whereas in larger diameter trees it was almost the same as that in trees from the 7- and 12-year-old plantations. This suggests that smaller diameter trees in the 3.5-year-old plantation had not yet produced mature wood.

? Xylem qualities had already reached values appropriate for harvesting, except in the smaller diameter trees from the 3.5-year-old plantation. This indicates that the larger diameter trees had already matured, regardless of their cambium age. These results suggest that the next step is to develop silvicultural treatments to increase the lateral growth rate during the early growing stage, in order to produce as much mature wood as possible, as quickly as possible.

     

Diversity of deciduousness and phenological traits of key Indian dry tropical forest trees

? In seasonally dry tropical forests deciduousness (leaflessness) is an important strategy of trees to survive in water stress period during summer. Deciduousness is a reflection of interacted effect of seasonal drought, tree characteristics and soil moisture conditions.

? The present study aims to document the diversity in leaf pheno-phases in terms of duration of deciduousness (which is reciprocal to growing season length), wood density, leaf mass per area (LMA) and leaf strategy index in 24 important tree species growing in the Vindhyan dry tropical forest in India.

? On the basis of phenological observations, the tree species were categorized into two main groups: leaf exchanging species exhibiting overlapping periods of leaf fall and leaf flush, and deciduous species whose timings of leaf flush and leaf fall differ resulting in a time lag (deciduousness) between the completion of leaf fall and initiation of leaf flush. Presence of wide range of deciduousness duration (from ca. a week to 7 months) among dry tropical trees indicates large variations in their growing season length. In the tree species studied, as the duration of deciduousness increased, leaf flushing period decreased significantly but leaf fall period showed little variation.

? Differing deciduousness in tree species exhibited substantial differences in their leafing (vegetative growth) pattern, as reflected by ratio of durations of leaf flush to leaf fall (leaf strategy index). Across different species, duration of deciduousness was significantly positively correlated with leaf strategy index, and significantly negatively correlated with both wood density and LMA.

? Wide variations in deciduousness, leaf strategy index, wood density and LMA in the 24 species investigated indicate considerable functional diversity in tree species growing in Vindhyan dry tropical region. Variation in seasonal duration of deciduousness among species is reflections of differences in tree functional traits like stem wood density, leaf strategy index and LMA.

     

Ranking larch genotypes with the Rigidimeter: relationships between modulus of elasticity of standing trees and of sawn timber

? Direct assessment of modulus of elasticity (MOE) on standing trees is attractive for breeders to evaluate genotypes prior to selection: this can be done using the Rigidimeter, a bending-based measurement device.

? In this study, we tested its reliability to properly rank genotypes by relating trunk MOE with MOEs estimated with a vibrating analysis system (Bing) on different types of conditioned wood specimens from the same trees (boards and standardised 2×2×30 cm-clear-wood specimens). One hundred and ten trees from different genotypes of hybrid larch (Larix × eurolepis) were tested.

? Mean trunk MOE was 7 300 MPa with a similar value obtained for sawn boards. Clear-wood specimens MOE increased from pith to bark from less than 6 000 MPa to nearly 9 000 MPa. Moderate correlations (r = 0.48–0.61) were found at the individual tree level between trunk MOE and MOE of wood samples.

? Single specimen MOE was shown to be strongly related to a linear combination of trunk MOE and sample position.

? At the genotype mean level, trunk MOE was highly correlated with wood samples MOE (r = 0.80–0.91). Ranking of genotypes based on trunk MOE was mostly consistent with that based on standardised specimens.

? It was concluded that besides other operational advantages which are discussed, the Rigidimeter is a valuable tool for breeders to routinely evaluate and rank genotypes for stiffness prior to further selection.

     

Colour and decay resistance and its relationships in Eperua grandiflora

? Eperua grandiflora, which is widely distributed in the French Guiana forest region, shows high variability in decay resistance. Further information concerning this wood quality parameter is necessary, but standard testing methods are complex and time-consuming. We assessed the use of colorimetry to determine durability in heartwood samples from a range of trees.

? Eperua grandiflora colour parameters were measured using a CIELAB system, revealing that the tree effect was greater than the radial position and height effects.

? The wood samples were exposed to Coriolus versicolor and Antrodia sp. according to two European standards (En 350-1 and XP CEN TS 15083-1). Eperua grandiflora is more susceptible to brown rot. These two standards did not give the same durability classes. The high variation in natural durability was due to the tree effect.

? These two properties were found to be correlated and the assessment also distinguished the extreme durability classes but they are not sufficient to classify the class of durability of this species.

     

High vs. low yielding oleoresin Pinus halepensis Mill. trees GC terpenoids profiling as diagnostic tool

? A discriminant study based on samples taken from high and low yielding oleoresin trees of two Greek populations, Chalkidiki and Euboia, was carried out. Oleoresin of Pinus halepensis Mill. was characterised by GC/MS analysis.

? The objectives of this study were: (i) to identify in detail the composition of the oleoresin of P. halepensis and in particular of high yielding trees (plus trees) (ii) to investigate a potential relationship between the oleoresin compounds and the oleoresin yield and (iii) to investigate any correlations among the compounds.

? About forty monoterpenes, sesquiterpenes and diterpenes were identified as main compounds representing 97.40% of the analyzed oleoresin. α-Pinene, methyl abietate, abietic acid, palustric acid, isopimaric acid and neoabietic acid were the major compounds. Efficient discrimination was achieved between the two populations and between the two groups of trees (high and low yielding). In both cases, the differentiation was due to the quantitative variability of certain compounds. High positive correlations were found among certain compounds.

? The results suggest that the oleoresin profile is a useful tool for the discrimination of trees according to their provenance or their oleoresin yield.