Private residential urban forest structure and carbon storage in a moderate-sized urban area in the Midwest,United States

In conjunction with urbanization and its importance as a major driver of land-use change, increased efforts have been placed on understanding urban forests and the provisioning of ecosystem services. However, very little research has been conducted on private property and little is known about the structure and function of privately owned urban forests. This research examines the structure of and carbon storage services provided by private residential urban forests in a moderate-sized Midwestern city. The primary research questions are as follows: What is the structure of private urban forests, and how does it vary across parcels? How much carbon is stored in tree and soil pools of private urban forests, and how does carbon vary across parcels? Ecological inventories were conducted on 100 residential parcels within 14 Neighborhood and Homeowners Associations of varying size and development age. Tree species richness, diversity, density, and diameter distribution were determined on a per parcel basis and for the entire tree population sampled. Further, tree and soil carbon storage were determined for each parcel. Results of this research demonstrated large variability in per-parcel tree metrics. Twelve of the parcels sampled had two or fewer trees, while eleven had greater than 50 trees. Further, tree carbon storage ranged from no carbon to 11.22 kg C m^?2. Alternatively, soil carbon storage was less variable and averaged 4.7 kg C m^?2, approximately 1.9 times higher than the average carbon stored in trees (2.5 kg C m^?2). Management efforts aimed at maintaining or enhancing carbon storage and other ecosystem services should focus on both soil protection and maximizing services in living biomass. Our results demonstrate that sustaining tree-produced ecosystem services requires maintenance of large old trees and species diversity, not only in terms of relative abundance, but also relative dominance, and in combination, species–specific size distributions.     

Density,diversity and richness of woody plants in urban green spaces: A case study in Chennai metropolitan city

A tree diversity inventory was carried out in urban green spaces (UGSs) of Chennai metropolitan city, India. This inventory aims to study the diversity, density and richness of trees in UGSs of Chennai. A total of one hundred 10 m × 10 m (total 1 ha) plots were laid to reveal tree diversity and richness of UGSs. Trees with ≥10 cm girths at breast height (gbh) were inventoried. We recorded 45 species in 42 genera and 21 families. Caesalpiniaceae and Fabaceae each with 6 species dominated the study area followed by Arecaceae (3). Density and stand basal area of the present study were 500 stems ha^?1 and 64.16 m², respectively. Most of the inventoried trees were native (31 species) and deciduous (28 species). Fabaceae and Caesalpiniaceae dominated the present study area in terms of stand basal area and density. The Shannon diversity index and evenness of study area were 2.79 and 0.73, respectively. The most important species and families based on species important value index (IVI) and family important value index were Albizia saman, Polyalthia longifolia and Azadirachta indica; Fabaceae, Caesalpiniaceae and Annonaceae respectively. We find Chennai's urban forest is relatively superior to many urban forests of the world in terms of stand basal area and species richness. Results emphasize the importance of enhancement of urban green spaces in Chennai metropolitan city.     

Assessing the performance of urban forest carbon sequestration models using direct measurements of tree growth

Across cities worldwide, people are recognizing the value of greenspace in ameliorating the health and well-being of those living there, and are investing significant resources to improve their greenspace. Although models have been developed to allow the quantification of ecosystem services provided by urban trees, refinement and calibration of these models with more accurate site- and species-specific data can increase confidence in their outcomes. We used data from two street tree surveys in Cambridge, MA, to estimate annual tree mortality for 592 trees and diameter growth rates for 498 trees. Overall tree turnover between 2012 and 2015 was relatively low (annualized 3.6% y⁻¹), and mortality rate varied by species. Tree growth rates also varied by species and size. We used stem diameter (DBH) and species identity to estimate CO₂ sequestration rates for each of 463 trees using three different model variations: (1) i-Tree Streets, (2) Urban Tree Database (UTD) species-specific biomass allometries and growth rates, and (3) empirically measured growth rates combined with UTD biomass allometries (Empirical + UTD). For most species, the rate of CO₂ sequestration varied significantly with the model used. CO₂ sequestration estimates calculated using i-Tree Streets were often higher than estimates calculated with the UTD equations. CO₂ sequestration estimates were often the lowest when calculated using empirical tree growth estimates and the UTD equations (Empirical + UTD). The differences among CO₂ sequestration estimates were highest for large trees. When scaled up to the entire city, CO₂ sequestration estimates for the Empirical + UTD model were 49.2% and 56.5% of the i-Tree Streets and UTD estimates, respectively. We suggest future derivations of ecosystem service provision models allow localities to input their own species-specific growth values. By adding capacity to easy-to-use tools, such as i-Tree Streets, we can increase confidence in the model output.     

The feasibility of remotely sensed data to estimate urban tree dimensions and biomass

Accurately measuring the biophysical dimensions of urban trees, such as crown diameter, stem diameter, height, and biomass, is essential for quantifying their collective benefits as an urban forest. However, the cost of directly measuring thousands or millions of individual trees through field surveys can be prohibitive. Supplementing field surveys with remotely sensed data can reduce costs if measurements derived from remotely sensed data are accurate. This study identifies and measures the errors incurred in estimating key tree dimensions from two types of remotely sensed data: high-resolution aerial imagery and LiDAR (Light Detection and Ranging). Using Sacramento, CA, as the study site, we obtained field-measured dimensions of 20 predominant species of street trees, including 30–60 randomly selected trees of each species. For each of the 802 trees crown diameter was estimated from the aerial photo and compared with the field-measured crown diameter. Three curve-fitting equations were tested using field measurements to derive diameter at breast height (DBH) (r² = 0.883, RMSE = 10.32 cm) from the crown diameter. The accuracy of tree height extracted from the LiDAR-based surface model was compared with the field-measured height (RMSE = 1.64 m). We found that the DBH and tree height extracted from the remotely sensed data were lower than their respective field-measured values without adjustment. The magnitude of differences in these measures tended to be larger for smaller-stature trees than for larger stature species. Using DBH and tree height calculated from remotely sensed data, aboveground biomass (r² = 0.881, RMSE = 799.2 kg) was calculated for individual tree and compared with results from field-measured DBH and height. We present guidelines for identifying potential errors in each step of data processing. These findings inform the development of procedures for monitoring tree growth with remote sensing and for calculating single tree level carbon storage using DBH from crown diameter and tree height in the urban forest.     

Relationships between bole and crown size for young urban trees in the northeastern USA

Knowledge of allometric equations can enable urban forest managers to meet desired economic, social, and ecological goals. However, there remains limited regional data on young tree growth within the urban landscape. The objective of this study is to address this research gap and examine interactions between age, bole size and crown dimensions of young urban trees in New Haven, CT, USA to identify allometric relationships and generate predictive growth equations useful for the region. This study examines the 10 most common species from a census of 1474 community planted trees (ages 4–16). Regressions were applied to relate diameter at breast height (dbh), age (years since transplanting), tree height, crown diameter and crown volume. Across all ten species each allometric relationship was statistically (p < 0.001) significant at an α-level of 0.05. Consistently, shade trees demonstrated stronger relationships than ornamental trees. Crown diameter and dbh displayed the strongest fit with eight of the ten species having an R² > 0.70. Crown volume exhibited a good fit for each of the shade tree species (R² > 0.85), while the coefficients of determination for the ornamentals varied (0.38 < R² < 0.73). In the model predicting height from dbh, ornamentals displayed the lowest R² (0.33 < R² < 0.55) while shade trees represented a much better fit (R² > 0.66). Allometric relationships can be used to develop spacing guidelines for commonly planted urban trees. These correlations will better equip forest managers to predict the growth of urban trees, thereby improving the management and maintenance of New England's urban forests.     

Carbon sequestration of four urban parks in Rome

Urban parks form the largest proportion of public green spaces contributing to both physical and mental well-being of people living in urban areas. CO₂ sequestration capability of the vegetation developing in parks of four historical residences (Villa Pamphjli, Villa Ada Savoia, Villa Borghese and Villa Torlonia) in Rome and its economic value were analyzed. Villa Pamphjli and Villa Ada Savoia having a larger vegetation extension (165.04 ha and 134.33 ha, respectively), also had a larger total yearly CO₂ sequestration per hectare (CS) (780 MgCO₂ ha⁻¹ year⁻¹ and 998 MgCO₂ ha⁻¹ year⁻¹, respectively) than Villa Borghese (664 MgCO₂ ha⁻¹ year⁻¹) and Villa Torlonia (755 MgCO₂ ha⁻¹ year⁻¹), which had a lower vegetation extension (56.72 ha and 9.70 ha, respectively). CS was significantly correlated with leaf area index (LAI). The calculated CS for the four parks (3197 MgCO₂ ha⁻¹ year⁻¹), corresponding to 3.6% of the total greenhouse gas emissions of Rome for 2010, resulted in an annual economic value of $ 23537 /ha.     

Street trees in Bangalore: Density,diversity, composition and distribution

Once renowned as India’s “garden city”, the fast growing southern Indian city of Bangalore is rapidly losing tree cover in public spaces including on roads. This study aims to study the distribution of street trees in Bangalore, to assess differences in tree density, size and species composition across roads of different widths, and to investigate changes in planting practices over time. A spatially stratified approach was used for sampling with 152 transects of 200 m length distributed across wide roads (with a width of 24 m or greater), medium sized roads (12–24 m) and narrow roads (less than 12 m). We find the density of street trees in Bangalore to be lower than many other Asian cities. Species diversity is high, with the most dominant species accounting for less than 10% of the overall population. Narrow roads, usually in congested residential neighborhoods, have fewer trees, smaller sized tree species, and a lower species diversity compared to wide roads. Since wide roads are being felled of trees across the city for road widening, this implies that Bangalore’s street tree population is being selectively denuded of its largest trees. Older trees have a more diverse distribution with several large sized species, while young trees come from a less diverse species set, largely dominated by small statured species with narrow canopies, which have a lower capacity to absorb atmospheric pollutants, mitigate urban heat island effects, stabilize soil, prevent ground water runoff, and sequester carbon. This has serious implications for the city’s environmental and ecological health. These results highlight the need to protect large street trees on wide roads from tree felling, and to select an appropriate and diverse mix of large and small sized tree species for new planting.     

The overlooked carbon loss due to decayed wood in urban trees

Decayed wood is a common issue in urban trees that deteriorates tree vitality over time, yet its effect on biomass yield therefore stored carbon has been overlooked. We mapped the occurrence and calculated the extent of decayed wood in standing Ulmus procera, Platanus × acerifolia and Corymbia maculata trees. The main stem of 43 trees was measured every metre from the ground to the top by two skilled arborists. All trees were micro-drilled in two to four axes at three points along the stem (0.3 m, 1.3 m, 2.3 m), and at the tree’s live crown. A total of 300 drilling profiles were assessed for decay. Simple linear regression analysis tested the correlation of decayed wood (cm²) against a vitality index and stem DBH. Decay was more frequent and extensive in U. procera, than P. acerifolia and least in C. maculata. Decay was found to be distributed in three different ways in the three different genera. For U. procera, decay did appear to be distributed as a column from the base to the live crown; whereas, decay was distributed as a cone-shape in P. acerifolia and was less likely to be located beyond 2.3 m. In C. maculata decay was distributed as pockets of variable shape and size. The vitality index showed a weak but not significant correlation with the proportion of decayed wood for P. acerifolia and C. maculata but not for U. procera. However, in U. procera, a strong and significant relationship was found between DBH and stem volume loss (R² = 0.8006, P = 0.0046, n = 15). The actual volume loss ranged from 0.17 to 0.75 m³, equivalent to 5%–25% of the stem volume. The carbon loss due to decayed wood for all species ranged between 69–110 kg per tree. Based on model’s calculation, the stem volume of U. procera trees with DBH ≥ 40 cm needs to be discounted by a factor of 13% due to decayed wood regardless of the vitality index. Decayed wood reduces significantly the tree’s standing volume and needs to be considered to better assess the carbon storage potential of urban forests.     

High carbon losses from established growing sites delay the carbon sequestration benefits of street tree plantings – A case study in Helsinki,Finland

We assessed the net carbon (C) sequestration dynamics of street tree plantings based on 10 years of measurements at two case study sites each with different tree species in Helsinki, Finland. We assessed C loss from tree soils and tree C accumulation, tested the applicability of pre-existing growth and biomass equations against observations, and estimated the time point for the beginning of net C sequestration for the studied street tree plantings. The tree woody biomass C accumulation in the first 10 years after planting was 18–32 kg per tree. At the same time the C loss from the growth media was at least 170 kg per growth media volume (25 m³) per tree. If this soil C loss was accounted for, the net C sequestration would begin, at best, approximately 30 years after planting. Biomass equations developed for traditional forests predicted more stem biomass and less leaf and branch biomass than measured for the species examined, but total aboveground biomass was generally well predicted.     

Comparing the carbon sequestration capacity of temperate deciduous forests between urban and rural landscapes in central Japan

Urbanisation is increasing tremendously in some parts of the world. Consequently, many rural forests may become depleted, although many opportunities exist for urban forests to increase. However, few studies have quantified the carbon (C) sequestration capacities of urban and rural forests in specific climatic zones. The present study compared carbon sequestration in two temperate deciduous forests located in Nagoya and Toyota, central Japan. The Nagoya University forest represented an urban forest, and a site in Toyota represented a rural forest. The urban forest at Nagoya University had comparatively smaller areas of green space and larger areas of buildings and roads. Land uses for building and road, which are typical of urban areas, result in smaller diurnal temperature ranges but higher air temperature, vapour pressure deficit, and atmospheric carbon dioxide (CO₂) concentration. The urban forest in this study exhibited higher gross ecosystem exchange (GEE), especially in the active growing season from May to September, suggesting the possible effect of CO₂ fertilisation. However, higher air temperatures caused comparatively smaller net ecosystem exchange (NEE) because of higher ecosystem respiration (RE). Although both forests functioned as CO₂ sinks at annual time scales, the rural Toyota forest site (5.43 t C ha^–1 yr^–1) had 36% higher net ecosystem production (NEP=–NEE; the negative sign indicates uptake by the forest ecosystem from the atmosphere) than that at the urban forest. The higher normalised respiration (i.e., RE/GPP ratio; GPP=–GEE where GPP represents gross primary production) at the Nagoya University forest might be attributable to factors associated with the degree of urbanisation. Thus, in temperate forests, factors associated with urbanisation may reduce the atmospheric carbon sink function by accelerating respiration. This is an issue of global interest, as many countries are experiencing rapid urbanisation.     

Estimation of broad-leaved canopy growth in the urban forested area using multi-temporal airborne LiDAR datasets

Inter-annual canopy growth is one of the key indicators for assessing forest conditions, but the measurements require laborious field surveys. Up-to-date LiDAR remote sensing provides sufficient three-dimensional morphological information of the ground to monitor canopy heights on a broad scale. Thus, we attempted to use multi-temporal airborne LiDAR datasets in the estimation of vertical canopy growth, across various types of broad-leaved trees in a large urban park.The growth of broad-leaved canopies in the EXPO '70 urban forest in Osaka, Japan was assessed with 19 plots at the stand level and 39 selected trees at the individual-tree level. Airborne LiDAR campaigns repeatedly observed the park in the summers of 2004, 2008, and 2010. We acquired canopy height models (CHMs) for each year from the height values of the uppermost laser returns at every 0.5 m grid. The annual canopy growth was calculated by the differences in CHMs and validated with the annual changes in field-measured basal areas and tree heights.LiDAR estimations revealed that the average annual canopy growth from 2004 to 2010 was 0.26 ± 0.11 m m⁻² yr⁻¹ at the plot level and 0.26 ± 0.10 m m⁻² yr⁻¹ at the individual-tree level. This result showed that growing trends were consistent at different scales through 2004 to 2010 despite uncertainty in estimating short-term growth for small crown areas at the individual-tree level. This LiDAR-estimated canopy growth shows a moderate relation to field-measured increase of basal areas and average heights. The estimation uncertainties seem to result from the complex canopy structure and irregular crown shape of broad-leaved trees. Challenges still remain on how to incorporate the growth of understory trees, growth in the lateral direction, and gap dynamics inside the canopy, particularly in applying multi-temporal LiDAR datasets to the large-scale growth assessment.     

Enhancing plant diversity and mitigating BVOC emissions of urban green spaces through the introduction of ornamental tree species

Promoting the plant diversity of urban green spaces is crucial to increase ecosystem services in urban areas. While introducing ornamental plants can enhance the biodiversity of green spaces it risks environmental impacts such as increasing emissions of biogenic volatile organic compounds (BVOCs) that are harmful to air quality and human health. The present study, taking Qingdao City as a case study, evaluated the plant diversity and BVOC emissions of urban green spaces and tried to find out a solution to increase biodiversity while reducing BVOC emissions. Results showed that: (1) the species diversity and phylogenetic diversity of trees in urban green spaces were 22% and 16% lower than rural forest of this region; (2) urban areas had higher BVOC emission intensity (2.6 g C m⁻² yr⁻¹) than their rural surroundings (2.1 g C m⁻² yr⁻¹); (3) introducing the selected 11 tree species will increase 15% and 11% of species diversity and phylogenetic diversity, respectively; and (4) the BVOC emissions from green spaces will more than triple by 2050, but a moderate introduction of the selected low-emitting trees species could reduce 34% of these emissions. The scheme of introducing low-emitting ornamental species leads to a win–win situation and also has implications for the sustainable green space management of other cities.     

Defect-disorder and risk assessment of heritage trees in urban Hong Kong

Heritage trees in a city, echoing factors conducive to outstanding performance, deserve special care and conservation. To understand their structural and health conditions in urban Hong Kong, 30 defect-disorder (DD) symptoms (physical and physiological) subsumed under four tree-position groups (soil-root, trunk, branching, and crown-foliage) and tree hazard rating were evaluated. The surveyed 352 trees included 70 species; 14 species with 233 trees were native. More trees had medium height (10–15 m), medium DBH (1–1.5 m) and large crown (>15 m). In ten habitats, public park and garden (PPG) accommodated the most trees, and roadside traffic island (RTI) and public housing estate (PH) had the least. Tree dimensions and tree habitats were significantly associated. The associations between the 2831 DD and tree-position groups, tree habitats and tree hazard rating were analyzed. Fourteen trees from Ficus microcarpa, Ficus virens and Gleditsia fera had high hazard rating, 179 trees from 22 species moderate rating, and 159 trees from 55 species low rating. RTI, roadside tree strip (RTS), roadside tree pit (RTP), roadside planter (RP) and stone wall (SW) had more moderate hazard rating, and PPG, roadside slope (RS) and government, institutional and community land (GIC) more low rating. Redundancy analysis showed that DD were positively correlated with RTS, RTP, RP and SW, but negatively correlated with PPG, RS and GIC (p < 0.05). The DD significantly increased tree hazard rating and failure potential. Future management implications for heritage-tree conservation and enhancement focusing squarely on critical tree defect-disorder in urban Hong Kong were explored, with application to other compact cities.     

Incidence and intensity of tree infestation by the mistletoe Erianthemum dregei (Eckl. & Zeyh.) V. Tieghem in Durban,South Africa

Relatively few studies have investigated mistletoe infestation of tree species in urban settings, and even fewer considered infestation of alien tree species. Here, mistletoe infestation incidence and intensity were studied in Durban, South Africa. The relationship of infestation to tree CBH and height was examined in detail for the mistletoe species Erianthemum dregei. Although E. dregei is known to have a wide range of host taxa, we report E. dregei infestation on 27 new host species for the first time. E. dregei occurred on 30 host species with a preference for the alien host tree Melia azedarach in our study area. The relationship between infestation and CBH indicated that the trees (irrespective of species) of ≥200 cm were more susceptible to the mistletoe attack. The implications of this pattern, as well as those of high host diversity and especially of infestation of alien trees are discussed in a conservation perspective.     

Stemflow chemistry in relation to tree size: A preliminary investigation of eleven urban park trees in British Columbia,Canada

Given increased atmospheric loads in cities, quantification of stemflow chemistry is necessary for a holistic understanding of elemental cycling in urban ecosystems. Accordingly, the stemflow volume and associated solute fluxes (K⁺, Ca²⁺, Na⁺, Mg²⁺) were measured for eleven deciduous trees in a manicured park setting in Kamloops, British Columbia, Canada. Over nine rainfall events from late June to early September 2013, larger trees [diameter at breast height (DBH) > 30 cm] were found to generally produce higher event stemflow volumes but lower funneling ratios than the smaller trees (DBH < 30 cm). The median flux-based enrichment ratio, which compares the solute input of stemflow to that of rainfall on a per unit trunk basal area, also tended to be greater for smaller trees than larger ones. Under all-tree and single-leader tree conditions, significant negative non-linear relationships between tree DBH and mean flux-based enrichment ratios were found for Ca²⁺, Na⁺, and Mg²⁺, but not for K⁺. These preliminary results indicate that urban trees can considerably enrich rainfall that is partitioned into stemflow, and that ion concentrations and enrichment ratios exhibit notably high interspecific variability. In this study, tree size and presence of single versus multiple leaders explained some of this heterogeneity; however, further study into those physical tree characteristics that affect stemflow volume and stemflow chemistry must be carried out if the impact and challenges of urban greening, nutrient cycling, and stormwater management initiatives are to be more fully understood.     

Influence of changing trees locations on thermal comfort on street parking lot and footways

Locations of trees in street parking lots (SPL) impact outdoor thermal comfort and should be considered during the urban planning process. In this paper we developed a procedure for changing trees locations in order to improve outdoor thermal comfort on SPL and associated footways. Furthermore, a sensitivity test on the effect of different tree crown shapes on outdoor thermal comfort was carried out. We applied theprocedure on real-world SPL design in the City of Novi Sad (Serbia). A temporal analysis is performed for the heat wave period using Universal Thermal Climate Index (UTCI) calculations in the Ladybug software.The results showed improvement of outdoor thermal comfort on 77 % of all body locations in proposed SPL design with predetermined number of trees. The largest outdoor thermal comfort improvement was noticed in the afternoon hours with up to 3.3 °C UTCI decrease on single body location. By adding trees to the SPL, heat stress was reduced on 84 % of all body locations with maximal UTCI decrease of 3.7 °C on single body location. Furthermore, heat stress reduction by cylinder-shaped tree crowns showed to be more pronounced compared to the sphere-shaped and the cone-shaped tree crowns. Proposed procedure showed that the locations of trees as well as tree crown shapes are very important for the improvement of outdoor thermal comfort and creation of environmentally conscious SPL design.     

Estimating the stormwater attenuation benefits derived from planting four monoculture species of deciduous trees on vacant and underutilized urban land parcels

This paper presents research that was undertaken to determine whether planting deciduous trees, using intensive tree planting schemes, on vacant and underutilized urban land provides significant hydrologic benefits. This work contributes to an ongoing discussion on how to use vacant and underutilized land productively, and may be important to land use decision-makers, whose policies support the use of green infrastructure for stormwater management. Tree growth parameters for four monoculture planting schemes were modeled (all trees had a 50.8 mm caliper at planting) and included (i) 450 Ginkgo biloba, (ii) 92 Platanus × acerifolia, (iii) 120 Acer saccharinum, and (iv) 434 Liquidambar styraciflua, on a 1.6-acre parcel. i-Tree Hydro (formerly UFORE-Hydro) was used to derive a simplified Microsoft Excel-based water balance model to quantify the canopy interception potential and evaporation, based on 7 years (2002–2008) of historical hourly rainfall and mean temperature data in Hamilton, Ontario, Canada. This study revealed that three of the species responded similarly, while one species (L. styraciflua) performed significantly better with respect to total canopy storage potential and evaporation, capturing and evaporating 2.9 m³/tree over the 7 years analyzed, or 1280 m³ for the total tree stand of 434 trees. The analyses presented herein demonstrate that the tree canopy layer was able to intercept and evaporate approximately 6.5%–11% of the total rainfall that falls onto the crown across the 7 years studied, for the G. biloba, P. × acerifolia and A. saccharinum tree stands and 17%–27% for the L. styraciflua tree stand. This study revealed that the rate at which a species grows, the leaf area index of the species as it matures, and the total number of trees to be planted need to be determined to truly understand the behavior and potential benefits of different planting schemes; had the mature leaf area been used as the sole indicator of the stormwater attenuating potential for each species, the A. saccharinum would have been the selected species. Also, had attenuation and evaporation per unit of tree been the only measurement reported, the P. × acerifolia stand would have been deemed the best performing tree, attenuating and evaporating 8.1 m³/tree. While the actual values presented herein may be uncertain because of a lack of locally-derived tree growth models, the approach described warrants further investigation.     

Effect of urbanization and climate change in the rooting zone on the growth and physiology of Pyrus calleryana

It is well known that trees can reduce the urban heat island and adapt our cities to climate change through evapotranspiration. However, the effects of urbanization and anticipated climate change in the soil–root rhizosphere have not been widely investigated. The current study studied the growth and physiology of the urban tree Pyrus calleryana grown in a factorial experiment with or without urbanization and simulated climate change between April 2010 and December 2012 in the Botanical Grounds of the University of Manchester, UK. The study indicated that urbanization and simulated climate change had small but contrasting effects on tree growth and morphology. Urbanization increased tree growth by 20–30%, but did not affect leaf area index (LAI) and showed reduced peak water loss and hence evapotranspirational cooling. Although soil moisture content in the upper 20 cm was higher in the urbanized plots, urbanization showed reduced sap flux density, reduced chlorophyll a:b and delayed recovery of chlorophyll fluorescence (Fv:Fm) throughout the experimental period. In contrast, simulated climate change had no effect on growth but increased LAI by 10%. Despite being more water stressed, trees grown in simulated climate change plots lost more water both according to porometry and sap flow measurements. Simulated climate change increased peak energy and water loss by around 13%, with trees having an average sap flux density of around 170 g cm^?2 d^?1, 40% higher than trees grown in control plots. Our study suggested that transpirational cooling benefit might be enhanced with a longer growth season and higher soil temperature in places such as Manchester, UK in future, but potentially at the expense of photosynthesis and carbon gain.     

Carbon storage and sequestration by urban forests in Shenyang,China

Urban forests can play an important role in mitigating the impacts of climate change by reducing atmospheric carbon dioxide (CO₂). Quantification of carbon (C) storage and sequestration by urban forests is critical for the assessment of the actual and potential role of urban forests in reducing atmospheric CO₂. This paper provides a case study of the quantification of C storage and sequestration by urban forests in Shenyang, a heavily industrialized city in northeastern China. The C storage and sequestration were estimated by biomass equations, using field survey data and urban forests data derived from high-resolution QuickBird images. The benefits of C storage and sequestration were estimated by monetary values, as well as the role of urban forests on offsetting C emissions from fossil fuel combustion. The results showed that the urban forests in areas within the third-ring road of Shenyang stored 337,000 t C (RMB92.02 million, or $ 13.88 million), with a C sequestration rate of 29,000 t/yr (RMB7.88 million, or $ 1.19 million). The C stored by urban forests equaled to 3.02% of the annual C emissions from fossil fuel combustion, and C sequestration could offset 0.26% of the annual C emissions in Shenyang. In addition, our results indicated that the C storage and sequestration rate varied among urban forest types with different species composition and age structure. These results can be used to help assess the actual and potential role of urban forests in reducing atmospheric CO₂ in Shenyang. In addition, they provide insights for decision-makers and the public to better understand the role of urban forests, and make better management plans for urban forests.     

Intensive recreational activities in suburban forests: A method to quantify the reduction in timber value

Central European forests are generally multifunctional; the same forest areas are used for timber production and recreation. In frequently visited areas damage to trees can be observed. We developed a method to estimate the actual reduction in timber value due to recreation-induced damage. The method was tested in two suburban (oak–hornbeam and beech) forests sustainably maintained by a selective management system and with free access in northwestern Switzerland. Considering the total forest areas, 9.4% of oak trees and 23.0% of beech trees were damaged by recreational activities. The resulting reduction in timber value averaged 19 and 53 € ha^?1 a^?1 in the two forests. The annual reduction in timber value due to recreation-induced damage can account for up to 16% of the total proceeds. The monetary benefits of forest recreation in these areas, however, by far exceed the damage to trees.