Genetic analysis for resistance to bean fly (Ophiomyia phaseoli) and seed yield among common bean genotypes in a semi-arid environment

Bean fly (Ophiomyia spp.) is a major field pest limiting common bean production in eastern Africa. The genetic enhancement of beans for resistance to insect pests is essential for minimizing yield losses arising from crop damage. The objectives of this study were to (1) assess combining ability for bean fly resistance and seed yield accumulation in common bean and (2) estimate genetic parameters associated with resistance for formulating further breeding strategy. Four parents with known reaction to bean fly were crossed with four locally adapted genotypes in an 8 × 8 half diallel mating design. Parents and F₂ progenies were grown in an alpha-lattice design replicated twice in an open-field and subjected to natural populations of bean fly for two cropping seasons under semi-arid conditions. Similarly, two resistant and two susceptible parents were selected and crossed to produce populations for generation means and variances components analysis. Results revealed that both general combining ability (GCA) and specific combining ability (SCA) mean squares were significant (p ≤ 0.05) for all four traits studied except SCA for stem damage during one cropping season. Among the parents, GBK 047858 was the best general combiner for all the traits studied across seasons except for stem damage during long rains (LR) 2009. Besides, genotypes GBK 047821 and Kat × 69 (a locally adapted variety) were generally good general combiners for resistance traits as well as seed yield. General predictability ratio (GPR) values ranging from 0.63 to 0.90 were obtained for plant mortality, stem damage, pupae in stem and seed yield across cropping seasons. These results established the predominance of additive gene effects (fixable variation) over the non-additive effects in controlling the traits. Low to moderate narrow sense heritability values ranging from 0.22 to 0.45 were obtained for pupae in stem. Such heritability estimates indicate that although additive gene components were critical in the inheritance of resistance for the trait, non-additive gene action were also important in addition to the environmental effects.     

Multiple-disease resistance in Vicia faba: Multi-environment field testing for identification of combined resistance to rust and chocolate spot

The aim of this work was to identify Vicia faba germplasm resistant both to rust and chocolate spot. A collection of 43 accessions of V. faba previously identified as chocolate-spot resistant was evaluated for rust and chocolate spot resistance in Egypt and in Spain. The genotype and genotype × environment (GGE) biplot analyses allowed the selection of 11 accessions resistant to both diseases in those locations. These 11 accessions were evaluated for rust in an additional field trial in Spain, all performing better than the susceptible check. The joint analysis of the 11 accessions in the four field trials where they had been evaluated revealed no significant effects either for genotype, environment or the genotype × environment interaction. They are hence promising sources of resistance, both for their low severities and their stable responses across the studied environments. This collection was also tested under controlled conditions against the Egyptian and the Spanish isolates of rust present in the field trials further underlining the stable performance of these genotypes. Finally, the effect of previous infection with chocolate spot on rust resistance was assessed under controlled conditions and no influence of it was found.     

Identification and multi-environment validation of resistance to Botrytis fabae in Vicia faba

The aim of this work was to find new sources of resistance to chocolate spot disease, and to validate their stability across different environments. In order to do so, a collection of 307 accessions of Vicia faba was screened for resistance to Botrytis fabae under field conditions; stability of resistance of the 40 most-resistant accessions was tested in a multi-location experiment in Austria, Chile, Egypt, France and Spain over two field seasons. Although complete resistance was not found, nine accessions showed interesting levels of incomplete resistance (ranging from 10 to 20% of average severity across environments, maximum average severity being 47.9%). Genotype × environment interaction accounted for 22% of the sum of squares of the multi-environment evaluation, revealing instability of the phenotypic expression across environments. This usually hampers the efficiency of selection and reduces the adaptability of the plant material. Three accessions stand out for their consistent resistance, both in terms of reduced disease severity and high stability, which make them good candidates for breeding programs. As for environments, those with the highest total severity mean were the most discriminant between accessions. In contrast, those with lower severity means were the most representative of the whole range of environments. It can be concluded that validation of resistance to chocolate spot in different environments is an essential step when screening for material of interest and should be taken into account for further works.     

Adaptation strategy,germplasm type and adaptive traits for field pea improvement in Italy based on variety responses across climatically contrasting environments

A pea breeding strategy is required to cope with the large climatic variation featuring south-European environments. Thirty-seven recent cultivars bred by 21 European or Australian institutions were grown in two climatically contrasting Italian sites (Lodi, subcontinental; Foggia, Mediterranean), two cropping years per site and two sowing times per year, to define various elements of this strategy. The study assessed: (i) the impact of genotype × environment (GE) interaction due to spatial and temporal factors on the consistency of top-yielding cultivars; (ii) the similarity between environments for GE effects and its implications on adaptation strategies; (iii) the extent of genotypic and GE interaction effects, and the relationship with adaptive responses, for various morphophysiological traits; (iv) the adaptation pattern and the combination of adaptive traits featuring three germplasm types, i.e. European spring and winter types, and germplasm selected in Mediterranean environments; (v) the predicted efficiency of direct and indirect selection procedures for grain yield. The geoclimatic area had a major impact on crop yield (5.15 t/ha in Lodi vs. 2.52 t/ha in Foggia) but tended to affect GE interaction less than time or year of autumn sowing, suggesting to breed for wide adaptation. Top-yielding cultivars as modeled by additive main effects and multiplicative interaction were environment-specific. On average, spring and winter materials outyielded the Mediterranean germplasm but the spring type, characterized by wide entry variation, included most widely- and specifically-adapted top-yielding cultivars. Cold-tolerant spring-type germplasm is preferable to breed for wide adaptation as it may combine high yield potential with adaptation to winter cold and terminal drought and heat stress. Lodging susceptibility, harvest index, onset and duration of flowering, and canopy height at maturity assessed in individual environments showed moderate to fairly high broad-sense heritability on a plot basis (h² > 0.20) and tended to correlation with yield over test environments (r ≥ 0.20). An indirect selection index including harvest index and canopy height exhibited about 20% greater predicted efficiency than direct selection for yield when using one selection environment and could be preferred for early selection stages. Direct yield selection in late selection stages should ideally be performed across 2 years in two environments that contrast for geoclimatic area and time of autumn sowing.     

Response of common wheat varieties to organic and conventional production systems across Italian locations,and implications for selection

Specific breeding for organic systems may help reduce their yield gap relative to conventional systems by exploiting genotype × system (GS) interaction. Likewise, specific breeding for distinct subregions within a region could capitalize on genotype × location (GL) interaction. Grain yield and test weight of common wheat varieties were evaluated under organic and conventional systems in ten locations spanning from northern to southern Italy, with the objectives of: (i) comparing production systems; (ii) investigating the extent of GS and GL interactions and their relationship with genotypic and environmental characteristics; and (iii) preliminarily comparing, in terms of predicted selection gains, different strategies to cope with GS and GL effects. These effects were investigated in the 2-year Data set 1 including seven genotypes. GS effects were also assessed in the annual Data sets 2 and 3 including 13 and 11 genotypes, respectively. The yield reduction of organic systems relative to conventional ones averaged 28% in Data set 1, 29% in Data set 2 and 14% in Data set 3. Organic systems also tended to a modest test weight reduction. Genetic correlations between systems ranged from high to very high (0.88 ≤ r_g ≤ 0.98) for yield and test weight, owing to nil or limited GS interaction. Broad-sense heritability tended to be higher in conventional systems than organic ones for yield in two data sets (mainly due to lower experimental error) while being similar in the two systems in the other cases. Predicted selection gains suggested nil (yield) or very modest (test weight) advantage of direct selection in organic systems relative to indirect selection in conventional systems, when targeting organic systems. The scope for selection only in conventional systems was reinforced when comparing predicted gains for selection scenarios which target both systems in relation to their foreseeable marketing importance. GL effects for yield and test weight were significant and were modeled by additive main effects and multiplicative interaction analysis. Site classification based on GL effects for yield revealed a larger subregion A including northern and central Italy and a smaller subregion B comprising southern Italy, accordingly with previous, independent studies. Yield selection only in subregion A (with indirect selection gain for subregion B) implied slightly higher predicted gain for A (+4%) and much lower gain for B (−24%) relative to independent, direct selection in each subregion. Selection for specific geoclimatic subregions may have greater importance than selection for specific production systems.     

Influence of the soil physical environment on rice (Oryza sativa L.) response to drought stress and its implications for drought research

Plant performance under drought stress is not solely defined by an inadequate water supply but by an interaction among many factors, including climatic, edaphic, and biological factors. An important interacting factor affecting root growth, and therefore the ability of a plant to access and take up water, is the soil physical environment. Soil penetration resistance can restrict, or even halt, root system growth. For rice, a soil penetration resistance of 1.4 MPa is sufficient to inhibit root system expansion. This review describes the effects of the soil physical environment on root growth and its interaction with drought stress. A large variation in soil penetration resistance exists among rainfed rice-growing areas of South and Southeast Asia and within experimental stations used for managed-drought field phenotyping. This variability may influence genotypic performance across experimental sites/countries and the response of crop genotypes to drought stress. A case study is presented in which differences in the soil physical environment may partially elucidate differences in experimental results between two field studies conducted at different locations. These results highlight the need for increased knowledge of environmental interactions to allow the outputs of genomics to increase drought tolerance at the field level.     

Lucerne shoot and root traits associated with adaptation to favourable or drought-stress environments and to contrasting soil types

Cultivar × location interaction for lucerne forage yield across northern Italy is large, repeatable and associated with summer drought-stress level and soil type. The objectives of this study were: (i) to investigate the genotypic factors associated with cultivar adaptive responses to drought-stress and soil factors; (ii) to identify adaptive traits exploitable for selection of widely adapted or specifically adapted material. Aerial dry matter (DM) over 12 harvests and shoot traits of 13 landraces and four varieties were evaluated in four artificial environments created by the factorial combination of drought-stress level (almost nil or high) and soil type (sandy-loam or silty-clay) (Exp. 1). Aerial and root DM over four or five harvests were evaluated in metal containers 55 cm × 12 cm × 75 cm deep for the factorial combinations of three varieties by two drought-stress levels by two soil types (Exp. 2), or six landraces by two drought-stress levels (Exp. 3). Cultivar × environment interaction was detected for forage yield, plant mortality after the second summer, leaflet size and stem weight. The environments of Exp. 1 reproduced well the variety adaptive responses across agricultural environments. The relationship of cultivar forage yield with shoot traits was environment-specific, i.e.: (i) strictly negative with plant mortality, in no-stress environments (where mortality and plant competition were severe); (ii) positive with stem number per plant and autumn-winter growth, in stress environments; (iii) positive with stem dry weight, in ‘stress/sandy-loam soil’; and (iv) positive with leaflet size, in ‘no-stress/sandy-loam soil’. Cultivars specifically adapted to no-stress or sandy-loam conditions showed consistently greater root DM across three soil layers than material with opposite adaptive response. Entry yields tended to inverse genetic correlation between two environments which represented contrasting geographical subregions and were characterized by different combinations of traits associated with higher yield, i.e.: (i) higher root biomass, lower plant mortality and larger leaflets, for ‘no-stress/sandy-loam soil’; and (ii) more stems per plant and greater autumn-winter growth, for ‘stress/silty-clay soil’. The difficulty of yield-based selection for wide adaptation may hardly be overcome by selection based on adaptive traits. Adaptive trait-based selection for specific adaptation may be envisaged especially for ‘stress/silty-clay soil’ conditions, for which the relevant traits are inexpensive to record, not correlated, and not subject to cultivar × environment interaction.     

Optimization of formic/acetic acid delignification of Miscanthus × giganteus for enzymatic hydrolysis using response surface methodology

A Box-Behnken experimental design and response surface methodology were employed to optimize the pretreatment parameters of a formic/acetic acid delignification treatment of Miscanthus × giganteus for enzymatic hydrolysis. The effects of three independent variables, namely cooking time (1, 2 and 3 h), formic acid/acetic acid/water ratio (20/60/20, 30/50/20 and 40/40/20) and temperature (80, 90 and 107 °C) on pulp yield, residual Klason lignin content, concentration of degradation products (furfural and hydroxymethylfurfural) in the black liquor, and enzymatic digestibility of the pulps were investigated. The major parameter influencing was the temperature for pulp yield, delignification degree, furfural production and enzymatic digestibility. According to the response surface analysis the optimum conditions predicted for a maximum enzymatic digestibility of the glucan (75.3%) would be obtained using a cooking time of 3 h, at 107 °C and with a formic acid/acetic acid/water ratio of 40/40/20%. Glucan digestibility was highly dependent on the delignification degree.     

Differential response of pea (Pisum sativum) to Orobanche crenata, Orobanche foetida and Phelipanche aegyptiaca

Several broomrape species including Orobanche crenata, Orobanche foetida and Phelipanche aegyptiaca are reported to infect various grain and forage legumes in the Mediterranean and West Asia. Pea (Pisum sativum) is severely damaged by O. crenata, but there are no reports on O. foetida or P. aegyptiaca infection. We report here that pea can induce high germination of seeds of O. crenata, O. foetida and P. aegyptiaca but only O. crenata success infecting pea roots and developing further. Some differences in levels of infection by O. crenata were observed among pea accessions what can be exploited in pea resistance breeding programmes. On the contrary, all pea accessions studied were highly resistant to infection by both O. foetida and P. aegyptiaca, preventing any tubercle attachment and development. This makes pea a promising candidate as trap crop for O. foetida and P. aegyptiaca seed bank demise in infested soils.     

Adaptation of landrace and variety germplasm and selection strategies for lucerne in the Mediterranean basin

Lucerne (Medicago sativa L.) can enhance the economic and environmental sustainability of crop-livestock systems in the western Mediterranean basin, but requires improved adaptation to stressful environments because of a predicted shortage of irrigation water and climate change. This study reports on three-year dry matter yields of five landraces from Morocco, Italy and Tunisia and seven varieties from France, Italy, Australia and USA assessed across 10 agricultural environments of Algeria, Tunisia, Morocco and Italy of which four were rainfed, one was continuously irrigated (oasis management), and five were irrigated but adopted a nine-week suspension of irrigation during summer. Our objectives were targeting cultivars to specific environments, and assisting regional breeding programmes in defining adaptation strategies, genetic resources and opportunities for international co-operation. The crop persisted well in all environments, but environment mean yield was strictly associated (P < 0.01) with annual and spring-summer (April–September) water available. Rainfed cropping implied 42% lower yield with 61% less spring-summer water available relative to irrigation with withheld summer water across three sites hosting both managements. All of these sites showed genotype × management interaction (at least P < 0.10). Cross-over genotype × environment (GE) interaction between top-yielding cultivars occurred across the 10 environments. Total number of harvests (range: 9–23), soil salinity as measured by electrical conductivity (range: 0.20–6.0 dS m⁻¹), and average spring-summer water available (range: 102–932 mm) were selected as significant (P < 0.05) environmental covariates in a factorial regression model explaining 53% of GE interaction variation. This model was exploited for targeting cultivars as a function of site-specific levels of these factors. Its indications agreed largely with those of an additive main effects and multiplicative interaction model with two GE interaction principal components. An Italian landrace exhibited specific adaptation to severely drought-prone environments, whereas landraces from north Africa were not adapted to such environments. One Moroccan landrace was specifically adapted to high number of harvests (partly reflecting frequent mowing). One variety selected for salt tolerance, and one Moroccan landrace, were specifically adapted to salt-stress environments. Environment classification as a function of GE interaction effects indicated three groups which may be object of specific breeding: (i) rainfed or irrigated environments featuring limited spring-summer water available (<350 mm), nil or low soil salinity, and moderate to low number of harvests; (ii) salt-stress environments; and (iii) environments characterized by high number of harvests.     

Genotype × environment interaction for zinc and iron concentration of wheat grain in eastern Gangetic plains of India

Zinc and iron are important micronutrients for human health for which widespread deficiency occurs in many regions of the world including South Asia. Breeding efforts for enriching wheat grains with more zinc and iron are in progress in India, Pakistan and CIMMYT (International Maize and Wheat Improvement Centre). Further knowledge on genotype × environment interaction of these nutrients in the grain is expected to contribute to better understand the magnitude of this interaction and the potential identification of more stable genotypes for this trait. Elite lines from CIMMYT were evaluated in a multilocation trial in the eastern Gangetic plains (EGP) of India to determine genotype × environment (GE) interactions for agronomic and nutrient traits. Agronomic (yield and days to heading) data were available for 14 environments, while zinc and iron concentration of grains for 10 environments. Soil and meteorological data of each of the locations were also used. GE was significant for all the four traits. Locations showed contrasting response to grain iron and zinc. Compared to iron, zinc showed greater variation across locations. Maximum temperature was the major determinant for the four traits. Zinc content in 30–60 cm soil depth was also a significant determinant for grain zinc as well as iron concentration. The results suggest that the GE was substantial for grain iron and zinc and established varieties of eastern Gangetic plains India are not inferior to the CIMMYT germplasm tested. Hence, greater efforts taking care of GE interactions are needed to breed iron and zinc rich wheat lines.     

Pre- and post-inoculation activity of a protectant and a systemic fungicide for control of anthracnose fruit rot of strawberry under different wetness durations

A protectant fungicide (Captan, a.i. captan) and a systemic fungicide (Switch, a.i. fludioxonil + cyprodinil) were evaluated as pre- and post-inoculation applications for control of anthracnose fruit rot (AFR), caused by Colletotrichum acutatum, under a short (6 or 8 h) or long (18 or 24 h) wetting period. Evaluations were conducted for two seasons in Maryland and for two seasons in Florida. Both Captan and Switch were very effective for control of AFR when applied prior to inoculation, but control was more effective under the shorter wetting period. Switch was as effective when applied 4, 8, or 24 h post-inoculation as when applied before inoculation, but control was better under the short wetting period. Captan was effective when applied 4 or 8 h after inoculation under the short wetting period, but was ineffective at 24 h post-inoculation. Post-inoculation sprays of Captan were ineffective at any time under the long wetting period. The post-infection activity of Switch allows greater flexibility for managing AFR when fungicide applications are scheduled based on weather-based decision-support systems.     

Optimal numbers of environments to assess slopes of joint regression for grain yield,grain protein yield and grain protein concentration under nitrogen constraint in winter wheat

Plant breeders are interested in rationally reducing the number of testing environments for breeding new genotypes adapted to diverse conditions. One way to characterize the adaptation of a genotype is to use the joint regression model. Our objectives were to estimate the stability for grain yield (GY), grain protein yield (GPY) and grain protein content (GPC) of a set of wheat genotypes grown under varying nitrogen conditions and then to determine optimal numbers of environments for assessing the slopes of joint regression.     

Mild peroxyformic acid fractionation of Miscanthus × giganteus bark. Behaviour and structural characterization of lignin

Miscanthus × giganteus bark was subjected to mild fractionation with peroxyformic acid by a two stage process. A factorial experimental design was used to study and quantify the effect of the variables (formic acid concentration (80-90%), hydrogen peroxide concentration (0.2-0.4%), temperature of the first stage (60-80 °C), and treatment time of the second stage (60-120 min)) on the main parameters of fractionation: pulp yield, remaining lignin and total polysaccharides in pulp. The dependence of lignin precipitation rate on hydrogen peroxide concentration in liquor was also studied. Hydrogen peroxide concentrations inferior to 0.5% seems to be suitable to recover high percentages of lignin. The isolated lignin was analysed by 2D-HSQC, ¹³C- and ³¹P NMR spectroscopy, FTIR spectroscopy, size-exclusion chromatography and chemical analysis. The most important chemical modifications taken place in the lignin during the fractionation were identified: β-O-4′ cleavage and hydrolysis of LC-bond structures. The C9-formula was also determined: C₉H_6.81O_2.90(OCH₃)_0.68(COOH)_0.07(OH^Ph)_0.38(OH^Al)_0.33.     

Yield stability of faba bean lines under diverse broomrape prone production environments

Faba bean (Vicia faba L.) is one of the important pulse crops grown in many parts of the world. Its production and productivity are affected by different biotic and abiotic stresses. Broomrape (Orobanche and Phelipanche spp.) causes yield losses of 7- 80% in major faba bean growing countries mainly in the Mediterranean Basin and Nile Valley countries. Host plant resistance is found to be the most effective and economic method of broomrape control. Efforts made at the International Center for Agriculture Research in the Dry Areas over many years to develop advanced breeding lines with acceptable resistance and tolerance levels to broomrape have resulted in the identification of several useful breeding lines. These lines were shared with National Agricultural Research Systems (Egypt, Sudan, Tunisia and Portugal) as part of the Faba Bean Orobanche International Nursery, in order to test their stability across three seasons (2005, 2006 and 2007). The results showed that Orobanche plant number, dry weight, Orobanche index, flowering date, maturing date and grain yield were significantly different among lines and locations. AMMI analysis showed that some lines derived from hybrid bulk populations “HBP/DS0/2000” and “HBP/ES0/2000” showed acceptable levels of yield stability in the presence of Orobanche infections across all environments compared with susceptible check. In highly infested soils, the tolerant and resistant lines gave acceptable levels of yield compared with the susceptible check. However, the yield potential of resistant and tolerant lines in non-infested soils was lower than the highly susceptible check.     

Evaluation of early to medium maturing open pollinated maize varieties in SADC region using GGE biplot based on the SREG model

Analysis of multi-environment trials (METs) of genotypes (G) and genotype × environment (GE) interactions for yield performance across environments, and selection of the best genotypes is an important routine in maize breeding programs. Analysis and interpretation of METs data have been limited to analysis of variance and mean comparison among genotypes. This type of analysis has not been effective in exploiting GE interactions encountered in METs data sets. The objectives of this study were to exploit METs data sets from maize regional trails using G plus GE interaction (GGE) biplot based on the site regression (SREG) model. The GGE biplots displays graphically the relationship among test environments, genotypes and GE interactions. Grain yield data of 35 early to medium maturing open pollinated maize varieties (OPVs) from five seasons (1999–2003) across 59 locations in Southern African Development Community (SADC) were analyzed. The GGE biplots based on the SREG model indicated that yield performance of maize OPVs were under major environments and of GE interactions. The construction of GGE biplots based on SREG model analysis showed the ideal test environments that discriminate well performing maize OPVs from poor ones, the performance of each OPV in specific year, the discrimativiness versus representativeness view of the GGE biplot of the test locations across the years, the relation among OPVs relative to grain yield, the stability of OPVs across environments and which OPVs is best for what.     

Compatibility of entomopathogenic nematodes (Nematoda: Rhabditida) with registered insecticides for Spodoptera frugiperda (Smith, 1797) (Lepidoptera: Noctuidae) under laboratory conditions

The fall armyworm, Spodoptera frugiperda (Smith, 1797) (Lepidoptera: Noctuidae) is considered the main key pest of corn crops in Brazil. Entomopathogenic nematodes (EPNs) may be used to control this pest, applied together with other different entomopathogen agents or phytosanity products in the spraying mixture. Thus, the objective of work was to evaluate the compatibility of EPNs with different insecticides used of S. frugiperda control in laboratory conditions. Three species of EPNs (Heterorhabditis indica, Steinernema carpocapsae and Steinernema glaseri) and 18 insecticides registered to control of S. frugiperda in corn crops were tested. Compatibility of the insecticides with EPNs was evaluated by observing mortality and infectivity of infecting juveniles (IJs) 48 h after immersion in solution of the insecticide formulations. Among all insecticides tested, Lorsban™ (chlorpyrifos), Decis™ (deltamethrin), Match™ (lufenuron), Deltaphos™ (deltramethrin + triazophos), Dimilin™ (diflubenzuron), Stallion™ (gamacyhalothrin), Karate Zeon™ (lambdacyhalothrin) Tracer™ (spinosad), Vexter™ (chlorpyrifos), Galgotrin™ (cypermethrin), Certero™ (triflumuron), and Talcord™ (permethrin) were compatible (class 1) with the three nematode species tested under laboratory conditions.     

Evaluation of common bean lines for their reaction to tomato yellow leaf curl virus-Ir2

Tomato yellow leaf curl virus (TYLCV) can cause an economically relevant disease in the major tomato growing regions, and no resistance has been identified in commercial and wild tomato cultivars in Iran. In the present study, 34 common bean lines were screened for their reaction to TYLCV-Ir2 under greenhouse conditions. The experiment was conducted in a randomized complete block design with three replications. Bean plants were inoculated at the first trifoliate stage with viruliferous whiteflies (Bemisia tabaci biotype B) and were then sprayed with an insecticide and maintained in whitefly-proof greenhouse. The inoculated plants were monitored for the development of symptoms and the presence of viral DNA by polymerase chain reaction (PCR) four weeks after inoculation. Results revealed that out of the 34 lines, five were resistant. These lines exhibited either no symptoms or very mild symptoms and no viral DNA was detected in them by PCR. Two lines, which showed no typical disease symptoms but contained viral DNA, were identified as tolerant to TYLCV-Ir2. The vector feeding preference for common bean lines was assessed. Results indicated a significant difference in adult whitefly numbers among bean lines but there was no relationship between the number of whiteflies and disease symptom severity. The resistance to TYLCY-Ir2 expressed in common bean lines may be useful as source of resistance for the development of resistant commercial common bean cultivars.     

Comparative susceptibility of Ostrinia furnacalis, Ostrinia nubilalis and Diatraea saccharalis (Lepidoptera: Crambidae) to Bacillus thuringiensis Cry1 toxins

Transgenic corn hybrids that express toxins from Bacillus thuringiensis (Bt) are highly effective against the European corn borer, Ostrinia nubilalis (Hübner), and the closely related Asian corn borer, Ostrinia furnacalis (Guenée). Since the registration of Bt corn hybrids in the U.S. in 1996, there has been a great deal of information generated on O. nubilalis. However, relatively little information exists for O. furnacalis. To help determine whether the information generated for O. nubilalis can be leveraged for decisions regarding the use of transgenic Bt corn against O. furnacalis, experiments were designed to determine whether the pattern of sensitivity to various Bt Cry1 toxins is similar between the two species. Test insects included laboratory-reared O. furnacalis originating from Malaysia, a Bt-susceptible laboratory colony of O. nubilalis maintained at the University of Nebraska-Lincoln (UNL) and an out-group consisting of the sugarcane borer, Diatraea saccharalis (F.), from Louisiana which represents a different genus from the same family. O. furnacalis and O. nubilalis exhibited a similar pattern of susceptibility to all the Cry1 toxins and were highly susceptible to the range of Bt toxins tested including Cry1Aa, Cry1Ab, Cry1Ac and Cry1F. Both of the Ostrinia species were more tolerant to Cry1Ba compared with D. saccharalis, although sensitivity of O. furnacalis was intermediate and did not differ significantly from that of O. nubilalis and D. saccharalis. D. saccharalis was also susceptible to the range of toxins tested but unlike the two Ostrinia species, was more tolerant to Cry1F and more susceptible to Cry1Ba. These results indicate that both of the Ostrinia corn borer species are similar in sensitivity to the Cry1Aa, Cry1Ab, Cry1Ac, Cry1Ba and Cry1F toxins, thus suggesting shared toxin receptors and mechanisms of toxicity for the two species.     

Characterization of Solanum chomatophilum resistance to 2 aphid potato pests, Macrosiphum euphorbiae (Thomas) and Myzus persicae (Sulzer)

The aphids Macrosiphum euphorbiae (Thomas) and Myzus persicae (Sulzer) (Hemiptera: Aphididae) are responsible for yield reduction in potato (Solanum tuberosum) production by direct phloem feeding and by spreading viruses. Breeding resistant traits from Solanum chomatophilum into the potato germplasm provides alternative means to control aphid infestations. Integrated pest management strategy, using plant resistance, benefits from the characterization of the resistance and of its impact on aphid biology. Our objective was to characterize the resistance of S. chomatophilum by assessing the effects of accessions, plant parts on aphid performance, and by assessing the impact of the resistance factors on different aphid developmental stages and on alate morph production. Detailed aphid performance was obtained by measuring fecundity, survival, percentage of nymphs that reached adult moult, and population growth using whole plant and clip cage experimental designs. Accession and plant physiological age, but not aphid developmental stage, influenced all life-history parameters, except for alate morph production which was not induced on the resistant accessions. Plant part influence was independent of plant species and accession. Both experimental designs resulted in congruent resistance levels at the accession level for each of the two aphid species, supporting the use of any of them in S. chomatophilum resistance screening. PI243340 was resistant to both aphid species, while PI365324 and PI310990 were also resistant to M. euphorbiae and M. persicae, respectively.