Pollution assessment and spatial variation of soil heavy metals in Lixia River Region of Eastern China

Purpose

The effect of soil heavy metals on crops and human health is an important research topic in some fields (Agriculture, Ecology et al.). In this paper, the objective is to understand the pollution status and spatial variability of soil heavy metals in this study area. These results can help decision-makers apportion possible soil heavy metal sources and formulate pollution control policies, effective soil remediation, and management strategies.

Materials and methods

A total of 212 topsoil samples (0–20 cm) were collected and analyzed for eight heavy metals (Cd, Hg, As, Cu, Pb, Cr, Zn, and Ni) from agricultural areas of Yingbao County in Lixia River Region of Eastern China, by using four indices (pollution index (PI), Nemerow pollution index (PI_N), index of geo-accumulation (I _geo), E _i /risk index (RI)) and cluster analysis to assess pollution level and ecological risk level of soil heavy metals and combining with geostatistics to analyze the concentration change of heavy metals in soils. GS+ software was used to analyze the spatial variation of soil heavy metals, and the semi-variogram model is the main tool to calculate the spatial variability and provide the input parameters for the spatial interpolation of kriging. Arcgis software was used to draw the spatial distribution of soil heavy metals.

Results and discussion

The result indicated that the eight heavy metals in soils of this area had moderate variations, with CVs ranging from 23.51 to 64.37 %. Single pollution index and Nemerow pollution index showed that about 2.7 and 1.36 % of soil sampling sites were moderately polluted by Cd and Zn, respectively. The pollution level of soil heavy metals decreased in the order of Cd?>?Zn?>?Pb?>?As?>?Cu?>?Cr?>?Ni?>?Hg. The I _geo values of heavy metals in this area decreased in the order of Zn?>?Cd?>?As?>?Pb?>?Cu?>?Cr?>?Hg?>?Ni. According to the E _i index, except Cd that was in the moderate ecological risk status, other heavy metals in soils were in the light ecological risk status, and the level of potential ecological risk (RI) of soil sampling sites of the whole area was light.

Conclusions

The results of four indices and the analysis of spatial variation indicated that the contents of Cd and Zn were contributed mainly by anthropogenic activities and located in the south-east of this study area. However, the contents of Hg, As, Cu, Pb, Cr, and Ni in soils were primarily influenced by soil parent materials.

     

Potentially toxic elements in the riparian soils of the Sava River

Purpose

Riparian zone contamination is a growing problem for several European catchments due to high anthropogenic pressures. This study investigates As, Cd, Cr, Cu, Ni, Pb, and Zn concentrations in the Sava River riparian zone, characterized by wide agricultural areas, various geological substrates, and different types of industrial pollution. The accumulation and mobility of these elements were studied because they are listed as priority substances in the Water Framework Directive and environmental objectives for surface waters.

Materials and methods

Sampling was performed during the sampling campaign of the EU 7th FW-funded GLOBAQUA project in September 2015 during a low-water event. Soil samples were collected along the Sava River at 12 selected sampling sites, from a depth of 0–30 cm, at a distance of 10–15 m from the river bank. The extent of pollution was estimated by determining total and readily soluble element concentrations in the soils. Potential ecological risk and the source of the selected elements in the soils was determined using the enrichment factor (EF), potential ecological risk index (RI), and statistical methods such as the principal component analysis (PCA) and multiple linear regression analysis (MLRA).

Results and discussion

This study showed that concentrations of the selected elements increase along the Sava. In terms of origin, PCA and MLRA indicated that Cr and Ni in soils are predominantly lithogenic, while As, Cd, Pb, and Zn are both lithogenic and anthropogenic (ore deposits, industry, and agriculture). PCA singled out Cu since its origin in soil is most probably from specific point-source pollution. EF was generally minor to moderate for most of the examined elements, apart from Cu, for which the EF was significant at one sampling site. Overall ecological risk (RI) fell within the low-risk category for most sites, apart from Belgrade sampling site (BEO), where high total Cd content affected individual and overall ecological risk indicators, indicating Cd could represent a considerable ecological risk for the downstream riparian zone.

Conclusions

At downstream sites, there was a noticeable increase in PTE content, with Cd, Cr, Ni, and Zn exceeding the proposed threshold values for European soils, indicating rising contamination in riparian soils. In terms of the ecological risk, only Cd could pose a potential ecological threat for the downstream riparian zone.

     

Remediation of heavy metal(loid)s contaminated sediments—in situ iron treatment and subsequent magnetic extraction

Purpose

Surface sediments contaminated with high levels of multiple heavy metal(loid) species are very common environmental problems. Especially, the labile and bioaccessible fractions of heavy metal(loid)s in the sediments are posing serious risks to the biota and the overlaying water quality. This study aimed at developing a potential method to manage the activity of the labile fractions of heavy metal(loid)s in surface sediments.

Materials and methods

This study assessed the feasibility of adding iron powder, a low-cost industrial by-product, to sediments containing high levels of Pb, As, and Cd to adsorb labile fractions of heavy metal(loid)s onto the sorbent surfaces and to retrieve the heavy metal(loid) laden powders by applying external magnetic field. In addition, the redistribution of Pb, Cd, and As in different sediment fractions, the dissolved fraction and the sorbent-adsorbed fraction, was also investigated and characterized.

Results and discussion

The results indicate that the bioactive labile fractions (exchangeable and carbonate-bound fractions) of heavy metal(loid)s are prone to concentrating onto iron powders and can be selectively removed from the sediments by magnetic retrieval. In addition, iron addition induces conversion of labile fractions of heavy metal(loid)s into more stabilized fractions.

Conclusions

Overall, the process can effectively minimize the activity of labile fractions of heavy metal(loid)s in surface sediments.

     

Potential use of cotton for remediating heavy metal-polluted soils in southern China

Purpose

Southern China is an important agricultural production base, as well as an important mineral resource area. There is a big challenge of heavy metal pollution in the soils of this area. Base on the characterizations of cotton and our present results, we discussed the potentiality to remediate the heavy metal-polluted soils through planting cotton in southern China.

Materials and methods

This paper summarises recent research to provide a better understanding of the status and the causes of heavy metal pollution in southern China, compare the applicability of different remediation methods in this area, evaluate tolerance and accumulation of cotton to heavy metals, and discuss the socioeconomic benefits of cotton planting for remediation of heavy metal-polluted soils.

Results and discussion

Human activity could be causing heavy metal pollution in southern China, as lead pollution is the most prevalent and cadmium pollution is the most severe in this area. Physical and chemical methods are used to remediate the heavy metal-polluted soils in southern China, by which treated polluted soils could not satisfactorily address the problems of economic feasibility, “secondary damage” and “secondary pollution”. The use of plants can green the environment to a certain extent, so the phytoremediation method is widely accepted. Cotton does not reach the standard of hyperaccumulation plants but has a relatively large biomass and shows more excellent tolerance ability and enrichment ability to heavy metals. Especially, the Cd concentration is lower in cotton fibre than in other cotton organs.

Conclusions

Cotton may be a potential crop to ameliorate the heavy metal pollution of farmland in southern China. In addition, cotton remediation combining with multiple repair measures of heavy metal pollution would obtain better repair effect and ecological benefits, and agronomic management practices could also effectively enhance cotton-remedied heavy metal-polluted soils.

     

Spatial distribution and source apportionment of the heavy metals in the agricultural soil in a regional scale

Purpose

Understanding the spatial distribution and sources of soil heavy metals (HMs) in a large city helps prevent and control soil pollution. This study aimed to investigate the spatial patterns of soil HMs and identify their main sources in a regional scale.

Materials and methods

A total of 110 topsoil samples were collected from Tai’an City, China. Cd, Cr, Cu, Hg, Ni, Pb, and Zn concentrations in each soil sample were determined. Geostatistics, geographic information system (GIS), and positive matrix factorization (PMF) were used to explore the spatial distribution of seven soil HMs and to reveal the main sources of soil HMs in Tai’an City, respectively.

Results and discussion

Soil Cd, Cr, Pb, and Zn generally showed slight pollution levels in the study area. However, soil Hg and Cu contents reached moderate to heavy pollution levels in some areas. Soil Hg content increased from north to south across the city, and the highest Hg concentration was detected in Ningyang County. Soil Cd, Cu, and Zn distributions exhibited a similar pattern, and their contents increased from west to east; the highest Cd, Cu, and Zn concentrations were found in Xintai County. The highest soil Ni concentration was obtained in the northeast of Feicheng and Xintai counties. PMF analysis revealed the following four potential sources of agricultural soil HMs in Tai’an City: industrial and mining activities, agricultural activities, residential living activities, and business activities. Soil Hg mainly originated from residential living activities, which accounted for 75.3% of the total source. The main sources of soil Ni were residential living activities, agricultural activities, and industrial and mining activities, which account for 38.2, 27.50, and 25.1% of the total source, respectively. Soil Cu was mainly produced by agricultural activities (36.6%), followed by residential living activities (29.8%) and industrial and mining activities (25.8%).

Conclusions

PMF combined with GIS could be effectively applied to determine the main sources of HMs in agricultural soils in a regional scale.

     

Bioaccumulation of heavy metals in the lotus root of rural ponds in the middle reaches of the Yangtze River

Purpose

The subject of this study is the sediment and wild lotus plants in unmanaged ponds, near Yichang City, contaminated by heavy metals. The objective is to determine the extent and frequency of heavy metal accumulation by lotus root in the ponds of rural areas and its significance to food safety and human health.

Materials and methods

The study area is located in the middle reaches of Yangtze River. The 11 sampling sites selected (Z1–Z11) were unmanaged ponds, and the lotus root samples were from wild plants. The lotus root and soil samples were processed using wet digestion, according to the national standard method; we tested concentration of heavy metal (Pb, Cd, Cr, As, Cu, and Zn). Both a single-factor index and an integrated pollution index were used to assess the heavy metal pollution of soil and wild lotus root. Correlation was used to examine the relationship of lotus root concentration to sediment concentration for each heavy metal.

Results and discussion

Cadmium (Cd) and arsenic (As) in both soil and pond sediment exceeded standards. The maximum single pollution index (SPI) for Cd and As was 1.16 and 1.15, respectively. The maximum integrated pollution index (IPI) for heavy metals was 2.17 for soil and 2.10 for sediment (moderate pollution). The heavy metal content in some samples of lotus root exceeded the national food standard and pose a health risk. The significant correlations of heavy metal concentrations (Pb, Cd, and As) in pond sediment with those in the surrounding soil show that the ponds act as sinks for agricultural nonpoint source pollution (NPS). The heavy metal concentrations in the peel of the edible tuber were 1.3～9.0 times higher than those in the inner flesh.

Conclusions

While Cd, Pb, and As concentrations in the sediment did not violate soil standards, concentrations in the lotus root did violate food standards. This species could be proposed as a suitable heavy metal bioindicator for the early stages of pollution from agricultural NPS.

     

Influence of organic and inorganic passivators on Cd and Pb stabilization and microbial biomass in a contaminated paddy soil

Purpose

Soil contamination with heavy metals, such as Cd and Pb, has caused severe health and environmental risks all over the world. Possible eco-friendly solutions for Cd and Pb immobilization were required to reduce its mobility through various cost-effective amendments.

Materials and methods

A laboratory incubation study was conducted to assess the efficiency of biochar (BC), zeolite (ZE), and rock phosphate (RP) as passivators for the stabilization of Cd and Pb in paddy soil as well as soil microbial biomass. Various extraction techniques were carried out: a sequential extraction procedure, the European Community Bureau of Reference (BCR), toxicity characteristic leaching procedure (TCLP) test, and single extraction with CaCl₂. The impact of passivators on soil pH, dissolved organic carbon (DOC), and microbial biomass (carbon, nitrogen, and phosphorus) was examined in the metal contaminated soil.

Results and discussion

The results showed that the exchangeable portion of Cd in soil was significantly reduced by 34.8, 21.6, and 18.8% with ZE, RP, and BC at a 3% application rate, respectively. A similar tendency of reduction in Pb soluble portion was observed by ZE (9.6%), RP (20%), and BC (21.4%) at a 3% application rate. Moreover, the TCLP leachate of Cd and Pb was apparently reduced by 17 and 30.3% with BC at a 3% application dose, respectively, when compared to the control. Soil pH, nutrients, and microbial biomass C, N, and P were significantly increased with the addition of BC, RP, and ZE passivators.

Conclusions

The results showed that the incorporation of BC, ZE, and RP significantly reduced the Cd and Pb mobility in paddy soil as well as enhanced soil nutrients and microbial biomass. Overall, among all the amendments, rice straw derived-BC performed better for Cd and Pb immobilization in paddy soil.

     

Heavy metal and PCB spatial distribution pattern in sediments within an urban catchment—contribution of historical pollution sources

Purpose

This work analyzes polychlorinated biphenyl (PCB) and heavy metal contamination in fluvial sediments and soils in an urban catchment, according to the geo-accumulation index and to soil and sediment quality guidelines. The catchment is located in Coimbra, Portugal, being affected by frequent flooding, and its main stream is a tributary to one of the major rivers in Portugal (Mondego). Given the presence of industrial activities over time, some inputs of pollutants are expected, but so far, the legacy of historic pollution in this catchment has not yet been investigated.

Materials and methods

Twenty-five samples were collected from nine sampling sites at the depths of 0–20, 20–40 and 40–60 cm (to provide a historic perspective) along longitudinal profiles (streamlines) and in soils downstream of pollution sources. These samples were analyzed for six heavy metals (Cu, Cr, Pb, Cd, Zn, Ni), organic carbon, pH and ten PCBs (IUPAC numbers 28, 30, 52, 101, 138, 153, 166, 180, 204, 209).

Results and discussion

Total PCB concentrations ranged 0.47–5.3 ng g^?1 dry weight (dw), and levels increase from the bottom to the top layers, suggesting an increased input over the last 100 years. PCB congener distribution shows the dominance of hexachlorobiphenyls, especially PCB138, suggesting the existence of local sources. PCB levels did not exceed sediment quality levels, placing sediments/soil under class 1 (not contaminated) or class 2 (trace contamination) with respect to PCB. All six metals exceeded the lowest effect level for sediment quality criteria, and three (Cd, Pb and Zn) largely exceeded the clean levels for dredged materials, placing sediments in class 5 (heavily contaminated). Sampling site S1 presented the highest concentrations of Zn, Pb and Cd, and historic vehicle traffic was identified as the most likely source, given the vertical and horizontal profiles.

Conclusions

High levels of Pb, Cd and Zn were found in fluvial sediments at some locations of the Loreto catchment, likely from historic traffic sources. This urban area is frequently affected by flooding events and is currently being subject to urban redevelopment. During these events/actions, historic pollutants in the sediments might surface and be redistributed, impacting the downstream ecosystem of the major Mondego River or increasing the risk of exposure of the urban population.

     

Evaluation of palygorskite for remediation of Cd-polluted soil with different water conditions

Purpose

The study aimed at comparing the effects of different water managements on soil Cd immobilization using palygorskite, which was significant for the selection of reasonable water condition.

Materials and methods

Field experiment was taken to discuss the in situ remediation effects of palygorskite on Cd-polluted paddy soils, under different water managements, using a series of variables, including pH and extractable Cd in soils, plant Cd, enzyme activity, and microorganism number in soils.

Results and discussion

In control group, the pH in continuous flooding was the highest under three water conditions, and compared to conventional irrigation, continuous flooding reduced brown rice Cd by 37.9%, and brown rice Cd in wetting irrigation increased by 31.0%. In palygorskite treated soils, at concentrations of 5, 10, and 15 g kg^?1, brown rice Cd reduced by 16.7, 44.4, and 55.6%; 13.8, 34.5, and 44.8%; and 13.1, 36.8, and 47.3% under continuous flooding, conventional irrigation, and wetting irrigation (p < 0.05), respectively. The enzyme activity and microbial number increased after applying palygorskite to paddy soils.

Conclusions

Continuous flooding was a good candidate as water management for soil Cd stabilization using palygorskite. Rise in soil enzyme activity and microbial number proved that ecological function regained after palygorskite application.

     

Assessment of cytotoxicity and AhR-mediated toxicity of sediments from water level fluctuation zone in the Three Gorges Reservoir,China

Purpose

The Three Gorges Dam project is one of the biggest projects in the world. The water level fluctuation zone (WLFZ) was created with impoundment. The purpose of the current study is to investigate the ecotoxicological potential of the sediment extracts from the WLFZ and propose future WLFZ monitoring for early detection of environmental changes brought about by pollution.

Materials and methods

The investigation was performed by using cell-based in vitro bioassays to determine acute cytotoxicity (neutral red retention assay) and mechanism-specific aryl hydrocarbon receptor (AhR)-mediated activity (7-ethoxyresorufin-O-deethylase (EROD) induction assay) of sediment extracts with rainbow trout (Oncorhynchus mykiss) liver cells (RTL-W1).

Results and discussion

Results showed that the cytotoxicity and AhR-mediated toxicity potential of the sediment extracts from the WLFZ in the Three Gorges Reservoir (TGR) were moderate of level compared with the ecotoxicity of sediments from other river systems. However, according to a sediment classification system in Germany, sediments from some individual sites in the WLFZ showed strong toxicity. Compared to the results from the Yangtze River in our previous study, more attention should be paid to the aryl hydrocarbon receptor inducers in the WLFZ in TGR.

Conclusions

The in vitro bioassays used in this study may serve as a valuable tool to predict the potential ecological hazards of the organic pollutants in the WLFZ to the aquatic organisms in some extent.

     

Simultaneous immobilization of lead,cadmium, and arsenic in combined contaminated soil with iron hydroxyl phosphate

Purpose

Combined contamination of lead (Pb), cadmium (Cd), and arsenic (As) in soils especially wastewater-irrigated soil causes environmental concern. The aim of this study is to develop a soil amendment for simultaneous immobilization of Pb, Cd, and As in combinative contaminated soil.

Materials and methods

A soil amendment of iron hydroxyl phosphate (FeHP) was prepared and characterized, and its potential application in simultaneous immobilization of Pb, Cd, and As in combined contaminated soil from wastewater-irrigated area was evaluated. The effects of FeHP dosage, reaction time, and soil moisture on Pb, Cd, and As immobilization in the soil were examined.

Results and discussion

The immobilization efficiencies of Pb, Cd, and As generally increased with the increasing of FeHP dosage. With FeHP dosage of 10 %, the immobilization percentages of NaHCO₃-extractable As and DTPA-extractable Pb and Cd reached 69, 59, and 44 %, respectively. The equilibrium time required for immobilization of these contaminants was in the following order: NaHCO₃-extractable As (0.25 days) < DTPA-extractable Cd(3 days) < DTPA-extractable Pb (7 days). However, the immobilization efficiencies of Pb, Cd, and As have not changed much under soil moisture varied from 20 to 100 %. According to the results of the sequential extraction, the percentages of Pb, Cd, and As in residual fractions increased after the application of FeHP amendment, while their percentages in exchangeable fractions decreased, illustrating that FeHP can effectively decrease the mobilities and bioavailabilities of Pb, Cd, and As in the soil. Moreover, the application of FeHP will not have soil acidification and soil structure problem based on the soil pH measurements and soil morphology.

Conclusions

FeHP can immobilize Pb, Cd, and As in the combinative contaminated soil from wastewater irrigation area simultaneously and effectively. Thus, it can be used as a potential soil amendment for the remediation of Pb, Cd, and As-combined contaminated soil.

     

A novel heavy metal chelating agent sixthio guanidine acid for in situ remediation of soils contaminated with multielements: its synthesis,solidification, biodegradability,and leachability

Purpose

The main objectives of the study were to (1) develop a one-step facile procedure for synthesizing a new chemical amendment agent with three chelating groups for solidifying multiple heavy metals, called sixthio guanidine acid (SGA), using guanidine hydrochloride and carbon disulfide as raw reactants and (2) assess its biodegradability, solidification effectiveness, and leachability in remedying soils contaminated with multiple heavy metals of various concentrations compared with other traditional amendment agents.

Materials and methods

Polluted soil samples were collected near a metalliferous mining site of Qixiashan in the southeast of Nanjing, China. Their concentrations were determined at 22.15–320 mg kg^?1 for As, 3.30–29.31 mg kg^?1 for Cd, 115.66–158.65 mg kg^?1 for Ni, 165.04–1677.06 mg kg^?1 for Pb, and 355.6–2426.91 mg kg^?1 for Zn. Biodegradability of SGA was assessed in accordance with GB/T 21831-2008 and OECD-301D. Total concentration of heavy metals was determined according to ISO11466:1995. A modified three-step sequential Community Bureau of Reference (BCR) extraction procedure was used to examine speciation of heavy metals in the soil sample, and concentrations of heavy metals were measured by using inductively coupling plasma optical emission spectrometry (ICP-OES). Leachate extraction tests were carried out before and after the soil sample was solidified with different amendments in accordance with HJ/T 557-2009.

Results and discussion

It is found that the optimal conditions for SGA synthesis are a molar ratio of 4:1, a reaction temperature of 40 °C, and a reaction time of 2 h. Under such conditions, SGA yield is achieved as high as 91.5 %. The bioavailability and mobility of As, Cd, Ni, Pb, and Zn in highly contaminated soils can be reduced via using SGA. Our results indicate that SGA is nonbiodegradative and much more effective than other traditional chemical amendment agents in that it is highly effective in comprehensively solidifying As, Cd, Ni, and Pb.

Conclusions

SGA has the potential for comprehensive in situ remediation of soils contaminated with several heavy metal elements of various concentration levels, and such findings may be used as a guide to design new chemical amendment agents for rehabilitating soils contaminated with heavy metals.

     

Source identification and apportionment of soil cadmium in cropland of Eastern China: a combined approach of models and geographic information system

Purpose

Cadmium (Cd) is regarded as one of the most toxic heavy metals in the environment and can undermine the ecosystem function and human health at trace level due to its high toxicity. In order to reduce the anthropogenic Cd input into agricultural soil, it is of utmost importance to pinpoint the sources of Cd in soils and apportion their respective contributions.

Materials and methods

One hundred twenty-seven topsoil samples and 21 subsoil samples were collected from croplands of Meishan Basin, Changxing County, Zhejiang Province, Eastern China, and analyzed for concentrations of Cd and other heavy metals. Finite mixture distribution model (FMDM) was employed to fit the data to obtain the local soil Cd threshold value, a critical indicator to assess soil heavy metal contamination. Then, principal component analysis (PCA) and geographic information system (GIS) were used to identify the potential sources of Cd. Finally, positive matrix factorization (PMF) was applied to apportion the source contributions.

Results and discussion

Among the 127 topsoil samples, 71 were subject to Cd contamination with a mean concentration of 0.66 mg kg^?1 while the others were considered as background with a lower mean concentration of 0.145 mg kg^?1, close to the local background concentration of 0.142 mg kg^?1. Further, three components were extracted by PCA and interpreted as natural background, lead-acid battery manufacturing plants, and construction material associated activities, respectively. Additionally, most of the topsoil samples around the lead-acid battery manufacturing plants, construction material plants, and limestone/marble quarries were classified as Cd contaminated. However, PMF failed to get a successful portioning.

Conclusions

Lead-acid battery manufacturing plants and construction material associated activities were the main anthropogenic sources of soil Cd contamination. With the help of FMDM, it is possible to distinguish the contaminated soil and estimate the contribution of anthropogenic sources to soil Cd. The apportionment by PMF was not successful in this paper due to the high skewness or outliers of Cd concentration in sampling sites and violation of the assumption that all samples have the same sources.

     

Geochemical monitoring of organic and inorganic pollutants in the sediment of the Eastern Posavina (Serbia)

Purpose

The aim of this study was to obtain a complete picture of the geochemical character of the sediment in the eastern Posavina region, Serbia, an area which has thus far not been systematically investigated. Geological mapping and impact assessment were thus carried out for this area.

Materials and methods

Sediments were sampled (from 0 to 0.5 m depth) in four locations in eastern Posavina between 2002 and 2014. Eight heavy metals (Ni, Zn, Cd, Cr, Cu, Pb, As and Hg) and a wide variety of organic parameters (16 EPA polycyclic aromatic hydrocarbons (PAHs), mineral oils, selected pesticides and polychlorinated biphenyls (PCBs)) were monitored. Metals were analysed by flame and graphite atomic absorption spectrometry, and gas chromatography with mass detection was used for the PAH analyses. The origins of the monitored substances were classified using geoaccumulation index (I _geo), ecological risk index (RI) and principal component analysis (PCA/FA).

Results and discussion

The sediments all contained higher heavy metals concentrations than the upper continental crust (UCC), suggesting dynamic natural and anthropogenic processes in this unique region. Significant variations (RSD values from 13 to 190) were observed for Cd (0.001–80.00 mg kg^?1), Hg (0.01–5.40 mg kg^?1), mineral oil (2.00–1851 mg kg^?1) and the sum of 16 EPA PAHs (0.003–5.57 mg kg^?1). The I _geo index classified the pollution risk due to Cr as strong, Cd, Zn and Hg as moderate to strong and Ni as moderate. Based on PCA/FA analysis, the parameters were grouped somewhat differently, with anthropogenic activity found to be responsible for much of the Hg, Cd and Cr pollution present in the sediments.

Conclusions

The analysis revealed eight heavy metals (Ni, Zn, Cd, Cr, Cu, Pb, As and Hg), the sum of 16 EPA PAHs and mineral oil as parameters of great interest for this unique region. These parameters must be the focus of future monitoring programs, in support of appropriate remediation techniques and/or dredging activities, which are required in order to comply with the new Serbian regulations and the relevant EU recommendations.

     

Heavy metal content and toxicity of mine and quarry soils

Purpose

Soils formed in metallic mines and serpentinite quarries, among other unfavourable features, have high levels of heavy metals. They can release into the environment causing surface and subsurface water contamination, uptake by plants, their accumulation in the food chain and adverse effects on living organisms. In this work, we studied the magnitude of the soils’ toxic effects not only on spontaneous plants but also on two species with phytoremediation potential.

Materials and methods

Several soils from two different exploitations were selected: a lead and zinc mine and a serpentinite quarry. Soils were characterized, and the pseudo-total and extractable contents of Co, Cr and Ni in soils from a serpentinite quarry were determined. The Cd, Pb and Zn pseudo-total and extractable contents were determined in soils developed in the Pb/Zn abandoned mine. Using a biotest, the chronic toxicity of the soil samples on higher plants was determined. Festuca ovina L., Cytisus scoparius (L.) Link., Sinapis alba L. and Brassica juncea L. were selected, the first two because they are spontaneous plants in the study areas and the last two because they have heavy metal phytoremediation potential.

Results and discussion

Pseudo-total contents of Co, Cr and Ni in the serpentinite quarry soils and of Zn, Pb and Cd in the Zn/Pb mine soils exceed generic reference levels. CaCl₂ is the reactant that extracts the highest proportion of Co, Cr and Ni in the quarry soils and EDTA the largest proportion of Pb Zn and Cd content in the mine soils. The germination index values based on seed germination and root elongation bioassays revealed increasing plant sensitivity to the mine soils in the following order: B. juncea?<?S. alba?<?F. ovina?<?C. scoparius. The wide range of GI values indicates that the response of test plants to soil heavy metals depended on their concentrations and soil characteristics, especially pH and organic matter content.

Conclusions

The pollution index indicates severe Cd, Pb and Zn contamination in the mine soils, as well as high Cr and Ni and moderate Co contamination in the serpentinite quarry soils. The performed biotests were suitable for identifying toxic soils and showed that the studied soils are toxic to the spontaneous plants, more to C. scoparius than to F. ovina. They also indicate that the mine soils are more toxic than the quarry soils for both species.

     

Management of human health risk in the context of kitchen gardens polluted by lead and cadmium near a lead recycling company

Purpose

At the global scale, gardening activities are often performed in urban areas with a historical background of pollution. In this study, a participatory program was developed with citizens concerned by gardening activities near a 50-year-old regulated lead recycling company, with the aim of co-constructing the tools for the assessment and management of potential sanitary risks induced by historic pollution with persistent (eco) toxic metals: lead and cadmium.

Materials and methods

Soils and vegetables (lettuce, leek, celery, carrot, chard, pumpkin, and celeriac) samples were collected from four kitchen gardens neighboring a 50-year-old secondary lead smelter. Both total and in vitro human bioaccessible metal concentrations in the cultivated plants were measured in relation to soil characteristics.

Results and discussion

The results showed that the soils of these gardens were slightly contaminated by metals (Pb, 77 to 236 mg kg^?1; and Cd, 0.5 to 1 mg kg^?1) in comparison with the natural geologic background. However, significant pollution of vegetables can occur especially with lead (Pb up to 9.8 mg kg^?1 in lettuce) and certainly as a result of direct foliar transfer. The washing of plants before consumption is therefore recommended in the context of atmospheric fallout of ultrafine particles enriched with metals.

Conclusions

Metal bioaccessibility measure integrates the influence of metal type, plant type, and soil physico-chemical properties. Based on the results, it is proposed that human bioaccessible fraction of metals may also be currently taken into account as well as total metal quantities and bioaccumulation factors in risk assessment studies performed in gardens. Overall, this study has led to reflections and functional recommendations aimed at reducing human exposure and to finally developing sustainable gardening practices.

     

Sustainability of in situ remediation of Cu- and Cd-contaminated soils with one-time application of amendments in Guixi,China

Purpose

In situ immobilization of heavy metal-contaminated soils with the repeated incorporation of amendments can effectively reduce the bioavailability of soil heavy metals. However, the long-term application of amendments would lead to the destruction of soil structure and accumulation of soil toxic elements, ultimately affecting food security and quality. Thus, the sustainability of the amendments in a heavy metal-contaminated soil was evaluated from 2010 to 2012.

Materials and methods

Batch field experiments were conducted in the soils, which were amended with apatite (22.3 t ha^?1), lime (4.45 t ha^?1), and charcoal (66.8 t ha^?1), respectively. The amendments were applied only one time in 2009, and ryegrass was sown each year. Ryegrass and setaria glauca (a kind of weed) were harvested each year. Concentrations of copper (Cu) and cadmium (Cd) were determined by batch experiments. Five fractions of Cu and Cd were evaluated by a sequential extraction procedure.

Results and discussion

Ryegrass grew well in the amended soils in the first year, but it failed to grow in all the soils in the third year. However, setaria glauca could grow with higher biomass in all the amended soils. The treatment of apatite combined with plants was more effective than lime and charcoal treatments in removing Cu and Cd from the contaminated soils by taking biomass into account. Apatite had the best sustainable effect on alleviating soil acidification. The Cu and Cd concentrations of CaCl₂-extractable and exchangeable fractions decreased with the application of amendments. Moreover, apatite and lime could effectively maintain the bioavailability of Cu and Cd low.

Conclusions

Apatite had a better sustainable effect on the remediation of heavy metal-contaminated soils than lime and charcoal. Although all the amendment treated soils did not reduce soil total concentrations of Cu and Cd, they could effectively reduce the environmental risk of the contaminated soils. The findings could be effectively used for in situ remediation of heavy metal-contaminated soils.

     

Land contamination by toxic elements in abandoned mine areas in Italy

Purpose

The present paper concerns the distribution and mobility of heavy metals (Cu, Pb, Zn and Fe) in the soils of some abandoned mine sites in Italy and their transfer to wild flora.

Materials and methods

Soils and plants were sampled from mixed sulphide mine dumps in different parts of Italy, and the concentrations of heavy metals were determined.

Results and discussion

The phytoremediation ability of Salix species (Salix eleagnos, Salix purpurea and Salix caprea), Taraxacum officinale and P?lantago major for heavy metals and, in particular, zinc was estimated. The results showed that soils affected by mining activities presented total Zn, Cu, Pb and Fe concentrations above the internationally recommended permissible limits. A highly significant correlation occurred between metal concentrations in soils.

Conclusions

The obtained results confirmed the environmental effects of mine waste; exploring wild flora ability to absorb metals, besides metal exploitation, proved a useful tool for planning possible remediation projects.

     

Total petroleum hydrocarbons and heavy metals in road-deposited sediments in Tijuana,Mexico

Purpose

A study was carried out to evaluate the concentration of heavy metals (Pb, Cu, Cr, Cd, and Hg) and total petroleum hydrocarbons (TPH) in road-deposited sediments (RDS) from Tijuana, Mexico, and identify their possible sources.

Materials and methods

Thirty RDS samples were randomly collected during the dry season using a brush and dustpan and classified according to construction material, traffic intensity, and land use. Soil samples were collected from a nonurban area and their concentrations were used as background values. For TPH, the samples were quantified gravimetrically after Soxhlet extraction, whereas heavy metals were extracted by acid digestion and their concentrations were measured by atomic absorption spectrometry.

Results and discussion

The mean TPH concentrations for RDS were 4208 mg kg^?1 and ranged from 1186 to 9982 mg kg^?1. For heavy metals, mean concentrations were 31.8, 50.2, 17.1, 0.1, and 0.1 mg kg^?1 for Pb, Cu, Cr, Cd, and Hg, respectively. The Igeo results showed that RDS from Tijuana are moderately to strongly polluted with Pb and Cu and moderately polluted with Cr. Principal component analysis (PCA) showed that Pb, Cu, and Cr could have their origin in tire wear, brake pads, bearings, and bushings.

Conclusions

The findings of this study revealed that RDS from Tijuana are polluted with TPH and heavy metals and that their principal sources are anthropogenic activities.

     

Mixed chelators of EDTA,GLDA, and citric acid as washing agent effectively remove Cd,Zn, Pb,and Cu from soils

Purpose

Soil washing with chelators is a viable treatment alternative for remediating multi-contaminated soils. The aim of this study was to investigate the removal efficiencies of Cd, Zn, Pb, and Cu in alkaline and acid multi-metal-contaminated soils by washing with the mixed chelators (MC).

Materials and methods

The batch experiments were carried out to evaluate the removal efficiencies of heavy metals in contaminated soils by the MC with different molar ratios of EDTA, GLDA, and citric acid, and evaluated the washing factors, including contact time, pH, MC concentration, and single and multiple washings at the same MC dose, on the removal efficiencies.

Results and discussion

Results showed that the removal efficiencies for Cd, Zn, Pb, and Cu by the MC (the molar ratio of EDTA, GLDA, and citric acid was 1:1:3) were as much as those of the only EDTA washing from both soil at the same application dose of total chelators; moreover, the application dose of EDTA decreased by 80%. For the alkaline-contaminated soil, the removal efficiencies of Cd, Zn, Pb, and Cu decreased with the increasing of the solution pH, which was opposite to acid-contaminated soil. This was attributed to that the metal-ligand complex could be obviously re-adsorbed on the soil surface sites, particularly in low pH values. The removal efficiencies of Cd, Zn, Pb, and Cu depended on MC concentration. A higher MC concentration led to a more effective removal of Cd, Zn, Pb, and Cu in alkaline-contaminated soil; however, their changes were slightly increased in acid-contaminated soil. At the same dose of MC, single washing with higher MC concentration might be favorable to remove heavy metals, moreover, with much less wastewater generation.

Conclusions

The MC (the molar ratio of EDTA, GLDA, and citric acid was 1:1:3) may be a useful, environmentally friendly, and cost-effective chelators to remediate heavily multi-metal-contaminated soil.