Land contamination by toxic elements in abandoned mine areas in Italy

Purpose

The present paper concerns the distribution and mobility of heavy metals (Cu, Pb, Zn and Fe) in the soils of some abandoned mine sites in Italy and their transfer to wild flora.

Materials and methods

Soils and plants were sampled from mixed sulphide mine dumps in different parts of Italy, and the concentrations of heavy metals were determined.

Results and discussion

The phytoremediation ability of Salix species (Salix eleagnos, Salix purpurea and Salix caprea), Taraxacum officinale and P?lantago major for heavy metals and, in particular, zinc was estimated. The results showed that soils affected by mining activities presented total Zn, Cu, Pb and Fe concentrations above the internationally recommended permissible limits. A highly significant correlation occurred between metal concentrations in soils.

Conclusions

The obtained results confirmed the environmental effects of mine waste; exploring wild flora ability to absorb metals, besides metal exploitation, proved a useful tool for planning possible remediation projects.

     

Acute toxicity of zinc and arsenic to the warmwater aquatic oligochaete <Emphasis Type="Italic">Branchiura sowerbyi</Emphasis> as compared to its coldwater counterpart <Emphasis Type="Italic">Tubifex tubifex</Emphasis> (Annelida,Clitellata)

Purpose

This study aimed at evaluating the acute effects of arsenic and zinc to the warmwater aquatic oligochaete Branchiura sowerbyi. Relative sensitivity with the coldwater species Tubifex tubifex was compared. Implications for the use of B. sowerbyi in the risk assessment of sediments in the tropics are discussed.

Materials and methods

Water-only (96 h) and sediment (14 days) toxicity tests were conducted with both species evaluating a concentration series of arsenic and zinc. The tests were conducted considering the environmental conditions in the natural habitat of T. tubifex (predominantly temperate) and B. sowerbyi (predominantly tropical). Both lethal and sublethal endpoints (autotomy of the posterior body parts, abnormal behavior and appearance) were determined in the tests. The lethal (LC₁₀ and LC₅₀) and effect (EC₁₀ and EC₅₀) concentrations were also determined to assess metal sensitivity for both species.

Results and discussion

Both test species were more sensitive to Zn than As in water-only tests, which is in agreement with previous studies evaluating the toxicity of these metals to aquatic oligochaetes. Sublethal effects were generally noted at concentrations lower than those leading to mortality. The warmwater oligochaete B. sowerbyi was more sensitive to both metals tested than the coldwater species T. tubifex.

Conclusions

Study findings support the need for using indigenous tropical species in risk assessments in the tropics. In addition, sublethal effect parameters should be included in toxicity testing with aquatic oligochaetes.

     

Interactive effects of biochar addition and elevated carbon dioxide concentration on soil carbon and nitrogen pools in mine spoil

Purpose

This study aimed to assess the effects of biochar on improving nitrogen (N) pools in mine spoil and examine the effects of elevated CO₂ on soil carbon (C) storage.

Materials and methods

The experiment consisted of three plant species (Austrostipa ramossissima, Dichelachne micrantha, and Lomandra longifolia) planted in the N-poor mine spoil with application of biochar produced at three temperatures (650, 750, and 850 °C) under both ambient (400 μL L^?1) and elevated (700 μL L^?1) CO₂. We assessed mine spoil total C and N concentrations and stable C and N isotope compositions (δ¹³C and δ¹⁵N), as well as hot water extractable organic C (HWEOC) and total N (HWETN) concentrations.

Results and discussion

Soil total N significantly increased following biochar application across all species. Elevated CO₂ induced soil C loss for A. ramossissima and D. micrantha without biochar application and D. micrantha with the application of biochar produced at 750 °C. In contrast, elevated CO₂ exhibited no significant effect on soil total C for A. littoralis, D. micrantha, or L. longifolia under any other biochar treatments.

Conclusions

Biochar application is a promising means to improve N retention and thus, reduce environmentally harmful N fluxes in mine spoil. However, elevated CO₂ exhibited no significant effects on increasing soil total C, which indicated that mine spoil has limited potential to store rising atmospheric CO₂.

     

Impacts of continuous excessive fertilization on soil potential nitrification activity and nitrifying microbial community dynamics in greenhouse system

Purpose

Sampling and analysis of greenhouse soils were conducted in Shouguang, China, to study continuous excessive fertilization effect on nitrifying microbial community dynamics in greenhouse environment.

Materials and methods

Potential nitrification activity (PNA), abundance, and structure of nitrifying microbial communities as well as the correlations with soil properties were investigated.

Results and discussion

Short-term excessive fertilization increased soil nutrient contents and the diversity of nitrifying microbial communities under greenhouse cultivation. However, the abundance and diversity of nitrifying communities decreased greatly due to the increase of soil acidity and salinity after 14 years of high fertilization in greenhouse. There was a significant positive correlation between soil PNA and the abundance of ammonia-oxidizing bacteria (AOB) but not that of ammonia-oxidizing archaea (AOA) in topsoil (0–20 cm) when pH ≥7. Soil PNA and AOB were strongly influenced by soil pH. The groups of Nitrososphaeraceae, Nitrosomonadaceae, and Nitrospiraceae were predominant in the AOA, AOB, and nitrite-oxidizing bacteria (NOB) communities, respectively. Nitrifying community structure was significantly correlated with soil electrical salinity (EC), organic carbon (OC), and nitrate nitrogen (NO₃ ^?–N) content by redundancy analysis (RDA).

Conclusions

Nitrification was predominated by AOB in greenhouse topsoil with high fertilizer loads. Soil salinity, OC, NO₃ ^?–N content, and pH affected by continuous excessive fertilization were the major edaphic factors in shaping nitrifying community structure in greenhouse soils.

     

Predicting soil loss in central and south Italy with a single USLE-MM model

Purpose

The USLE-MM estimates event normalized plot soil loss, A_e,N, by an erosivity term given by the runoff coefficient, Q_R, times the single-storm erosion index, EI₃₀, raised to an exponent b₁?>?1. This modeling scheme is based on an expected power relationship, with an exponent greater than one, between event sediment concentration, C_e, and the EI₃₀/P_e (P_e = rainfall depth) term. In this investigation, carried out at the three experimental sites of Bagnara, Masse, and Sparacia, in Italy; the soundness of the USLE-MM scheme was tested.

Materials and methods

A total of 1192 (A_e,N, Q_REI₃₀) data pairs were used to parameterize the model both locally and considering all sites simultaneously. The performances of the fitted models were established by considering all erosive events and also by distinguishing between events of different severity.

Results and discussion

The b₁ exponent varied widely among the three sites (1.05–1.44) but using a common exponent (1.18) for these sites was possible. The A_e,N prediction accuracy increased in the passage from the smallest erosion events (A_e,N?≤?1 Mg ha^?1, median error =?3.35) to the largest ones (A_e,N?>?10 Mg ha^?1, median error =?1.72). The Q_REI₃₀ term was found to be usable to predict both A_e,N and the expected maximum uncertainty of this prediction. Soil erodibility was found to be mainly controlled by the largest erosion events.

Conclusions

Development of a single USLE-MM model appears possible. Sampling other sites is advisable to develop a single USLE-MM model for a general use.

     

Partitioning characteristics of PAHs between sediment and water in a shallow lake

Goal, Scope and Background

Distribution of hydrophobic organic contaminants in abiotic compartments is essential for describing their transfer and fate in aquatic ecosystems. Taihu Lake is the third largest freshwater lake in China. Water quality of Taihu Lake has deteriorated greatly during the last decades and has threatened the water supply. The aim of the present study was to investigate the partitioning of polycyclic aromatic hydrocarbons (PAHs) among overlying water, suspended particulate matter (SPM), sediments, and pore water in Meiliang Bay, Taihu Lake and to provide useful information for the ecological engineering in this area.

Materials and Methods

Overlying water and surface sediment were sampled from six sites in Meiliang Bay, Taihu Lake, China. Within 72 h of sampling, sediments were centrifuged to obtain the pore water. Overlying water samples were filtered to separate dissolved and SPM samples. After extraction, samples were purified following a clean-up procedure. PAH fraction was obtained by elution with a mixture of hexane: DCM (7:3, V/V) and analyzed by GC/MS.

Results

PAHs concentrations in overlying water varied from 37.5 ng/L to 183.5 ng/L. Concentrations of PAHs in pore water were higher than those in overlying water. The total concentrations of 16 priority PAHs in sediments ranged from 2091.8 ng/g-dw to 4094.4 ng/g-dw. PAHs concentrations on SPM were decreased with suspended solid concentrations (SSC). Total PAHs concentrations on SPM varied in the range of 3369.6 ng/g-dw to 7531.1 ng/g-dw. The partition coefficients between sediment and overlying water (log K _oc) for PAHs with log K _ow<5 were positively correlated with their octanol-water partition coefficients (log K _ow) (n=39, r=0.79, p<0.0001). Partition coefficients between sediment and pore water (log K _oc′) for all PAHs were also significantly correlated with their log K _ow values (n=48, r=0.82, p<0.0001).

Discussion

In general, PAHs derived from combustion sources tend to bind strongly to soot particles in natural sediment. Consequentially, K _oc values observed in the natural environment could be orders of magnitude higher than those predicted by linear correlation relationships under laboratory conditions. In the present study, the ratio of log K _oc values to log K _ow values falls consistently above 1, indicating that the sediment soot carbon in the bay was more attractive for PAHs than n-octanol. The log K _oc′ was also higher than that predicted under laboratory conditions, suggesting that the measured pore water PAH concentrations were lower than those predicted. That is to say, not all the sediment PAHs can be available to partition rapidly into sediment pore waters. A variation in soot content is a possible reason. Furthermore, concentrations of PAHs on SPM were higher than those in sediments. The compositions of PAHs on SPM and in sediments were similar, indicating the importance of re-suspension process of sediments in the partitioning process of the shallow lake.

Conclusions

The results indicated the equilibrium partitioning model could be used to predict PAHs distribution in various phases of a shallow lake in the stagnation period, but re-suspension processes should be considered to modify the relationship between log K _ocs and log K _ows.

Recommendations and Perspectives

Concentration, particle size and composition of resuspended particles could affect the relationship between log K _ocs and log K _ows. Further work should be done under field conditions, especially where a steady thermodynamic equilibrium state could be assumed.

     

Biochar improves sediment microbial fuel cell performance in low conductivity freshwater sediment

Purpose

The low conductivity of sediments for mass and electron transport is the most severe limiting factor in sediment microbial fuel cells (SMFCs), so that sediment ameliorations yielded more remarkable effects than electrode improvements. The objective of this research was to enhance the electricity generation of SMFCs with amendments of biochar to freshwater sediments for conductivity enhancement.

Materials and methods

Laboratory-scale SMFCs were constructed and biochars were produced from coconut shells at different temperatures. Variations in the power output, electrode potential, internal resistance, total organic carbon (TOC) content, and microbial communities were measured.

Results and discussion

Amending with biochar reduced the charge transfer resistances of SMFCs and enriched the Firmicutes (mainly Fusibacter sp.) in the sediment, which improved the SMFC power generation by two- to tenfold and enhanced the TOC removal rate by 1.7- to fourfold relative to those without the amendment.

Conclusions

The results suggested that biochar amendment is a promising strategy to enhance SMFC power production, and the electrical conductivity of biochar should be considered important when interpreting the impact biochar has on the electrical performance of soil or freshwater sediment MFCs.

     

Biomineralization of atrazine and analysis of 16S rRNA and catabolic genes of atrazine degraders in a former pesticide mixing site and a machinery washing area

Purpose

The purpose of this study was to determine the first-order rate constants and half-lives of aerobic and anaerobic biomineralization of atrazine in soil samples from an agricultural farm site that had been previously used for mixing pesticide formulations and washing application equipment. Atrazine catabolic genes and atrazine-degrading bacteria in the soil samples were analyzed by molecular methods.

Materials and methods

Biomineralization of atrazine was measured in soil samples with a [U-ring-¹⁴C]-atrazine biometer technique in soil samples. Enrichment cultures growing with atrazine were derived from soil samples and they were analyzed for bacterial diversity by constructing 16S rDNA clone libraries and sequencing. Bacterial isolates were also obtained and they were screened for atrazine catabolic genes.

Results and discussion

The soils contained active atrazine-metabolizing microbial communities and both aerobic and anaerobic biomineralization of [U-ring-¹⁴C]-atrazine to ¹⁴CO₂ was demonstrated. In contrast to aerobic incubations, anaerobic biometers displayed considerable differences in the kinetics of atrazine mineralization between duplicates. Sequence analysis of 16S rDNA clone libraries constructed from the enrichment cultures revealed a preponderance of Variovorax spp. (51 %) and Schlesneria (16 %). Analysis of 16S rRNA gene sequences from pure cultures (n?=?12) isolated from enrichment cultures yielded almost exclusively Arthrobacter spp. (83 %; 10/12 isolates). PCR screening of pure culture isolates for atrazine catabolic genes detected atzB, atzC, trzD, trzN, and possibly atzA. The presence of a complete metabolic pathway was not demonstrated by the amplification of catabolic genes among these isolates.

Conclusions

The soils contained active atrazine-metabolizing microbial communities. The anaerobic biometer data showed variable response of atrazine biomineralization to external electron acceptor conditions. Partial pathways are inevitable in soil microbial communities, with metabolites linking into other catabolic and assimilative pathways of carbon and nitrogen. There was no evidence for the complete set of functional genes of the known pathways of atrazine biomineralization among the isolates.

     

Response of ammonia oxidizers and denitrifiers to repeated applications of a nitrification inhibitor and a urease inhibitor in two pasture soils

Purpose

The nitrification inhibitor 3,4-dimethylpyrazol-phosphate (DMPP) and the urease inhibitor N-(n-butyl) thiophosphoric triamide (nBTPT) can mitigate N losses through reducing nitrification and ammonia volatilization, respectively. However, the impact of repeated applications of these inhibitors on nitrogen cycling microorganisms is not well documented. This study aimed to investigate the changes in the abundance and community structure of the functional microorganisms involved in nitrification and denitrification in Australian pasture soils after repeated applications of DMPP and nBTPT.

Materials and methods

Soil was collected in autumn and spring, 2014 from two pasture sites where control, urea, urea ammonium nitrate, and urea-coated inhibitors had been repeatedly applied over 2 year. Soil samples were analyzed to determine the potential nitrification rates (PNRs), the abundances of amoA, narG, nirK and bacterial 16S rRNA genes, and the community structure of ammonia oxidizers.

Results and discussion

Two years of urea application resulted in a significantly lower soil pH at Terang and a significant decrease in total bacterial 16S rRNA gene abundance at Glenormiston and led to significantly higher PNRs and abundances of ammonia oxidizers compared to the control. Amendment with either DMPP or nBTPT significantly decreased PNRs and the abundance of amoA and narG genes. However, there was no fertilizer- or inhibitor-induced change in the community structure of ammonia oxidizers.

Conclusions

These results suggest that there were inhibitory effects of DMPP and nBTPT on the functional groups mediating nitrification and denitrification, while no significant impact on the community structure of ammonia oxidizers was observed. The application of nitrification or urease inhibitor appears to be an effective approach targeting specific microbial groups with minimal effects on soil pH and the total bacterial abundance.

     

Temporal and spatial variability of enantiomeric fractions (EFs) of chiral organochlorines in relation to soil properties

Purpose

The scope of this article was to investigate the spatial and temporal variability of enantiomeric fractions (EFs) of persistent organic pollutants (POPs) in soil compared to the uncertainty of the analytical data.

Materials and methods

Soil samples were taken with high spatial resolution at two sites in Czech Republic in 2008 to investigate variability on a small spatial scale. In addition, composite soil samples were taken from ten sites in 2005 and 2008 to investigate temporal variations. All samples were analysed for a suite of soil properties as well as concentrations and EFs of polychlorinated biphenyl (PCB) -95, PCB-132 and PCB-149; α-hexachlorocyclohexane (HCH); o,p′-dichlorodiphenyltrichloroethane (DDT); and o,p′-dichlorodiphenyldichloroethane (DDD).

Results and discussion

Median EFs of PCB-95 and PCB-149, α-HCH, o,p′-DDT and o,p′-DDD did not change significantly on the sites sampled in 2005 and again in 2008, while PCB-132 changed from EF?=?0.38 to EF?=?0.53. The sampling methodology is therefore very important, and composite samples will not be the best option if enantioselective degradation processes are investigated. Non-racemic EFs of POPs in the subsampled sites in 2008 were correlated to soil parameters, such as total organic carbon (TOC), total nitrogen and humic acids. These parameters are site specific and might vary on a small scale. This can explain why certain soil parameters are reported as significantly correlated with non-racemic EFs of chiral POPs in some studies, but not always in other similar studies.

Conclusions

While composite samples may still represent the overall prevailing EF range, they are not ideally suited to study enantiomeric degradation processes, which are taking place at a relative small scale, depending on the heterogeneity of soil parameters such as TOC, total organic nitrogen (TON) and humic acids.

     

The solid-solution distribution of copper added to soils: influencing factors and models

Purpose

A series of empirical and mechanistic geochemical models were developed to describe the solid-solution partitioning of copper (Cu) in typical fresh spiked Chinese soils.

Materials and methods

The influence of soil properties on Cu partitioning was assessed in a wide range of soils using multiple regression analysis. Geochemical models (WHAM VI and Visual MINTEQ) and simulation analyses in combination with experimental data (i.e., the bulk of soil properties and Cu contents) were performed in order to provide additional insight into the mechanisms controlling the Cu partitioning. Calculation of soluble Cu contents based on the two models was then simplified and optimized by adjusting input variables, and the calibrated outputs were used to produce reasonable predictions of soluble metal concentrations.

Results and discussion

The results of the multiple regression analyses presented in this paper show strong correlations between soluble Cu concentrations and soil Cu concentrations and properties, with adjusted coefficients of determination (R_adj²) ranging between 0.84 and 0.91. Soil organic carbon (OC) content was an insignificant factor in most cases, but the active fraction of dissolved organic matter was important in improving model estimates. The best fit of root mean square error (RMSE) varied between 0.42 and 0.77 for the WHAM VI model and between 0.28 and 0.57 for the Visual MINTEQ model across all pH categories.

Conclusions

The models presented in this paper are suitable for investigating and simulating Cu solid-solution partitioning in a wide range of Chinese soils.

     

Estimation of the cover and management factor based on stratified coverage and remote sensing indices: a case study in the Loess Plateau of China

Purpose

We attempt to describe the cover and management (C) factor more comprehensively through the use of a simple and efficient method.

Materials and methods

We measure the coverage of each vegetation layer and C factor for 152 sampled plots in the Ansai watershed. We propose four stratified coverage indices (green coverage (V _G), total coverage (V _T), probability coverage (V _P), weight coverage (V _W)), derive green and yellow vegetation indices from Landsat 8 OLI images to reflect green and residue cover, and construct and validate C factor estimation models from stratified coverage and remote sensing indices, respectively.

Results and discussion

(1) V _T and V _P present C factor estimation advantages for grassland and shrub land. V _W can better illustrate the C factor due to the relatively complete spatial structuring of woodland and orchard land. For cropland, four stratified coverage indices present the same estimation capacities for the C factor. Except for cropland and grassland, the estimation capabilities of V _G are relatively low because the residue layer is ignored. (2) The C factor is more sensitive to yellow vegetation indices, which indicates that senescent fractional cover and litter are important and cannot be ignored. The linear and non-linear models can explain 56.6 and 61.8% of C factor variation, respectively, and the linear model is more accurate than the non-linear model. (3) Compared to traditional indices (projective coverage and single remote sensing indices), stratified coverage indices and a combination of several remote sensing indices can estimate the C factor more effectively.

Conclusions

At the field scale, the C value estimation model can be selected according to the land-use type. At the watershed and regional scales, a linear model is recommended for C factor estimation.

     

Trace elements bioavailability to <Emphasis Type="Italic">Triticum aestivum</Emphasis> and <Emphasis Type="Italic">Dendrobaena veneta</Emphasis> in a multielement-contaminated agricultural soil amended with drinking water treatment residues

Purpose

The in situ stabilization of multielement-contaminated agricultural soils has limited effectiveness when using common single amendments. This study examined the use of drinking water treatment residues (WTR), based on (hydr)oxides of Fe, Al, or Mn, as a cost-effective solution to optimize the immobilization of metals (Cd, Pb, Zn) and As.

Materials and methods

Trace elements (TE) bioavailability was assessed under semi-controlled conditions in a pot study cultivating winter wheat (Triticum aestivum L. cv. Tiger) until maturity. An Fe-based WTR and a Mn-based WTR, applied at rates of 0.5 and 1% (m/m), were related to effects of lime marl (LM) application. Additionally, a bioassay with earthworms (Dendrobaena veneta) was conducted. Both bioassays were compared with measurements of NH₄NO₃-soluble, diffusive gradients in thin film (DGT)-available and soil solution TE concentrations, representing well-established surrogates for mimicking the bioavailable element fractions in soil.

Results and discussion

The application of the Fe-based WTR reduced As accumulation in vegetative wheat tissues (by up to 75%) and earthworms (by up to 41%), which corresponded with the findings from soil chemical analyses and improved plant growth and earthworm body weight. However, As concentrations in cereal grains were not affected, Cd or Pb accumulation by wheat was not mitigated, and Zn uptake was enhanced. By contrast, the Mn-based WTR effected the greatest reduction in Pb uptake, and lowered Cd transfer to wheat grain (by up to 25%). Neither the NH₄NO₃-soluble nor DGT-available concentrations matched with Cd and Zn accumulation in plants or earthworms, indicating interferences due to competition for binding sites according to the biotic ligand model.

Conclusions

The results obtained in this study suggest that a bioassay with key species prior to field application should be mandatory when designing in situ stabilization options. The application of WTR to an agricultural soil strongly affected TE bioavailability to plants and earthworms. Low application rates tended to improve biomass production of biota. Higher application rates involved risks (e.g., P fixation, TE inputs), and none of the amendments tested could immobilize all targeted elements.

     

Archaeal communities in the sediments of different mangrove stands at Dongzhaigang,China

Purpose

Knowledge of archaeal communities is essential for understanding of the mechanism of carbon and nitrogen cycle in the mangrove sediment ecosystem. Presently, little is known about archaeal communities in the Dongzhaigang mangrove sediments. This study aimed to characterize the archaeal communities in sediments of different mangrove stands and to find out the correlations between archaeal communities and the environmental factors of sediments.

Materials and methods

Sediment samples were collected from the Dongzhaigang mangrove forest for analysis of soil properties and archaeal communities, by national standard methods and Illumina Miseq archaeal 16S ribosomal RNA (rRNA) gene sequencing, respectively.

Results and discussion

The archaeal community in the Dongzhaigang mangrove forest was constituted by some phyla from “TACK” and “DPANN” supergroups, and dominated by Euryarchaeota. Among sediments of the four mangroves in Dongzhaigang, principal coordinates analysis (PCoA) scatter plot showed a trend of difference in the archaeal community structure in the Bruguiera gymnoihiza and Kandelia candel stands from that in the Laguncularia racemosa and Sonneratia apetala stands. The abundance of the order Methanosarcinales was the highest in the sediments of K. candel mangroves, whereas the order of Methanobacteriales dominated in B. gymnoihiza sediments. The highest richness and diversity values of Archaea occurred in K. candel sediments, while the lowest in B. gymnoihiza. Pearson correlation showed the significant relationships between sediment properties and some dominant genera, with a positive and significant correlation between sediment properties and genus Methanobacterium, coinciding with the maximum values of sediment properties and abundance of Methanobacterium in the sediment of B. gymnoihiza. Such results indicated that the difference of archaeal community structure among mangrove sediments may be caused by the different sediment characteristics. Methanogenic communities in the Dongzhaigang mangrove forest sediments were, at the order level, constituted by Methanobacteriales, Methanomicrobiales, Methanosarcinales, and Methanomassiliicoccales.

Conclusions

The investigation indicated that the Dongzhaigang mangrove sediment ecosystems support diverse archaeal communities and methanogenic communities, and that there was a general trend of difference in the archaeal community structure in the B. gymnoihiza and K. candel mangrove sediments from that in the L. racemosa and S. apetala sediments. Such difference may be caused by the difference in sediment characteristics.

     

Planktonic algal bloom significantly alters sediment bacterial community structure

Purpose

We determined the relationship of a planktonic algal bloom with spatial and temporal changes in sediment bacterial communities in a eutrophic urban river in the Taihu Basin, China.

Materials and methods

Surface sediments from different locations on the river, including with and without an algal bloom, were collected monthly for 1 year. Sediment bacterial communities were assessed by sequencing 16S rRNA gene amplicons using an Illumina MiSeq.

Results and discussion

There were distinct spatial and temporal changes in sediment bacterial community structure. Significant decrease in the Shannon diversity corresponded with the peak chlorophyll a (Chl a) concentration. Proteobacteria, Chloroflexi, and Bacteroidetes were the dominant phyla throughout the year; however, their relative abundances changed seasonally. At the time of peak Chl a concentrations, Proteobacteria and Bacteroidetes comprised a greater proportion of the bacterial community. Bacterial community structure also varied spatially at the operational taxonomic unit (OTU) level according to canonical correspondence analysis (CCA), especially in locations with an algal bloom compared with those without an algal bloom. There were positive correlations between multiple bacterial genera and Chl a content, suggesting the potential for facilitative relationships between phytoplankton and bacteria. Based on the CCA, water temperature, NH₄ ⁺-N, TN, NO₃ ^?-N, and TP in the sediment and Chl a contents in the water column were significantly correlated with sediment bacterial community structure (P < 0.05).

Conclusions

Planktonic algal blooms may influence sediment bacterial community structure at all taxonomic levels in urban rivers. This work emphasizes the need for more comprehensive studies regarding the impact of planktonic algal blooms on sediment bacterial communities.

     

Effect of surface heterogeneity on phosphorus adsorption onto mineral particles: experiments and modeling

Purpose

Adsorptive interaction at the solid-water interface plays an important role in the fate and behavior of phosphorus (P) in rivers and lakes and the resulting eutrophication. This study aims to investigate the contributions of heterogeneous morphology to P adsorption onto mineral particles.

Materials and methods

The dominant minerals in Yellow River sediment, quartz, k-feldspar, and calcite are investigated with adsorption experiments and microscopic examinations. Taylor expansion is applied to quantitatively characterize the heterogeneous surface morphology.

Results and discussion

The results reveal that locally concave or convex micro-morphology characterized by the second derivative term of the Taylor expansion, F ₂, can be related to adsorption capacity due to its effect on surface-charge density and distribution. The distribution of adsorbed P as a function of F ₂ was determined for selected particles composed of each of the pure minerals and was fit to a Weibull distribution. Each mineral was characterized by F _2a , the weighted average value of F ₂, and Weibull distribution factors, and correlated with sorption isotherms. The developed relationships were used to accurately predict adsorption onto individual particles as well as pure mineral samples.

Conclusions

Mineral particles have complex surface morphology, which affects the interface P adsorption. Micro-morphological characterization of F ₂ and F _2a can be used to predict adsorption onto the pure minerals, and this study provides physical basis for predicting adsorption on sediment particles composed of these minerals.

     

Assessing chemical soil tests for predicting nitrogen mineralization in paddy soils of the Dongting Lake region in China

Purpose

Developing routine methods that accurately predict soil nitrogen (N) mineralization is essential for fertilization recommendation; thus, chemical soil testing has received worldwide attention. However, the optimal chemical soil test for predicting soil N mineralization is region specific. This study aimed to determine suitable chemical soil tests for predicting N mineralization in paddy soils of the Dongting Lake region, China.

Materials and methods

Composite surface samples (0–20 cm) of soils (n?=?30) with diverse inherent properties were collected from representative paddy fields across the region. The benchmark indices for soil N mineralization were the net mineralization rate of soil N in a 112-day anaerobic incubation under waterlogged conditions (NMRN₁₁₂) and N mineralization potential (N _o ) estimated using a modified double exponential model. Laboratory-based measurements of soil labile organic N (SLON) were conducted using chemical fractionation methods including 0.01 M NaHCO₃ extraction, hot 2 M KCl hydrolysis, phosphate-borate (PB) buffer hydrolysis, acidic KMnO₄ oxidation, and alkaline KMnO₄ oxidation. These were compared with the benchmark indices to assess their suitability for use as indicators for N mineralization.

Results and discussion

Acidic KMnO₄-oxidative organic N (acidic KMnO₄-N) and PB buffer-hydrolysable organic N (PB_HYDR-N) correlated strongly with NMRN₁₁₂ and N _o (r?=?0.825–0.884, P?<?0.001, n?=?30). Grouping of soils based on soil texture generally provided no improvement in the relationships of chemical soil tests with NMRN₁₁₂ and N _o . Multiple stepwise regression analysis indicated that combining acidic KMnO₄-N and PB_HYDR-N yielded the best prediction of soil N mineralization, explaining 86.1 and 85.5 % of the variation in NMRN₁₁₂ and N _o , respectively, of the 30 tested paddy soils.

Conclusions

The results of acidic KMnO₄-N and PB_HYDR-N as indicators for soil N mineralization were promising, and the operations of acidic KMnO₄ oxidation and PB buffer hydrolysis procedures are simple and cost-effective. Therefore, a combination of acidic KMnO₄-N and PB_HYDR-N shows promise in predicting N mineralization in paddy soils of the Dongting Lake region. However, further calibration through field studies is required and the chemical characteristics of acidic KMnO₄-N and PB_HYDR-N needs to be further clarified.

     

Differential influence of four invasive plant species on soil physicochemical properties in a pot experiment

Purpose

This study compared the effects of four invasive plants, namely Impatiens glandulifera, Reynoutria japonica, Rudbeckia laciniata, and Solidago gigantea, as well as two native species—Artemisia vulgaris, Phalaris arundinacea, and their mixture on soil physicochemical properties in a pot experiment.

Materials and methods

Plants were planted in pots in two loamy sand soils. The soils were collected from fallows located outside (fallow soil) and within river valley (valley soil) under native plant communities. Aboveground plant biomass, cover, and soil physicochemical properties such as nutrient concentrations, pH, and water holding capacity (WHC) were measured after two growing seasons. Discriminant analysis (DA) was used to identify soil variables responsible for the discrimination between plant treatments. Identified variables were further compared between treatments using one-way ANOVA followed by Tukey’s HSD test.

Results and discussion

Plant biomass, cover, and soil parameters depended on species and soil type. DA effectively separated soils under different plant species. DA on fallow soil data separated R. laciniata from all other treatments, especially I. glandulifera, native species and bare soil, along axis 1 (related mainly to exchangeable K, N-NH₄, total P, N-NO_3, and WHC). Large differences were found between R. laciniata and S. gigantea as indicated by axis 2 (S-SO₄, exchangeable Mg, total P, exchangeable Ca, and total Mg). DA on valley soil data separated R. japonica from all other treatments, particularly S. gigantea, R. laciniata, and native mixture, along axis 1 (N-NO₃, total N, S-SO₄, total P, pH). Along axis 2 (N-NO₃, N-NH₄, Olsen P, exchangeable K, WHC), large differences were observed between I. glandulifera and all other invaders.

Conclusions

Plant influence on soil differed both among invasive species and between invasive and native species. Impatiens glandulifera had a relatively weak effect and its soil was similar to both native and bare soils. Multidirectional effects of different invaders resulted in a considerable divergence in soil characteristics. Invasion-driven changes in the soil environment may trigger feedbacks that stabilize or accelerate invasion and hinder re-colonization by native vegetation, which has implications for the restoration of invaded habitats.

     

Stability of soil organic carbon and potential carbon sequestration at eroding and deposition sites

Purpose

This study aims to explore the dynamics of the factors influencing soil organic carbon (SOC) sequestration and stability at erosion and deposition sites.

Materials and methods

Thermal properties and dissolved aromatic carbon concentration along with Al, Fe concentration and soil specific surface area (SSA) were studied to 1 meter depth at two contrasting sites.

Results and discussion

Fe, Al concentrations and SSA size increased with depth and were negatively correlated with SOC concentration at the erosion site (P?<?0.05), while at the deposition site, these values decreased with increasing depth and were positively correlated with SOC concentration (P?<?0.05). TG mass loss showed that SOC components in the two contrasting sites were similar, but the soils in deposition site contained a larger proportion of labile organic carbon and smaller quantities of stable organic carbon compared to the erosion site. SOC stability increased with soil depth at the erosion site. However, it was slightly variable in the depositional zone. Changes in SUVA₂₅₄ spectroscopy values indicated that aromatic moieties of DOC at the erosion site were more concentrated in the superficial soil layer (0–20 cm), but at the deposition site they changed little with depth and the SUVA₂₅₄ values less than those at the erosion site.

Conclusions

Though large amounts of SOC accumulated in the deposition site, SOC may be vulnerable to severe losses if environmental conditions become more favorable for mineralization in the future due to accretion of more labile carbon. Deep soil layers at the erosion site (>30 cm deep) had a large carbon sink potential.