Preparation and properties of antibacterial Poly(vinyl alcohol) nanofibers by nanoparticles

Poly(vinyl alcohol) (PVA)/Ag-zeolite nanofiber webs were prepared with different concentrations of Ag-zeolite nanoparticles by the electrospinning technique. Scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM), Fourier transform-infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Instron, and antibacterial activities analysis were utilized to characterize the morphology and properties of the PVA/Ag-zeolite nanofiber webs. The study results showed that the polymer concentration, applied voltages and tip-to-collector distances were the main factors influencing the morphology of the electrospun nanofiber webs. The introduction of Ag-zeolite nanoparticles improved the mechanical properties and thermal stability of the PVA nanofiber webs. TEM data demonstrated that the Ag-zeolite nanoparticles were well distributed within the nanofiber. FTIR revealed a possible interaction between the PVA matrix and the Ag-zeolite nanoparticles. These fibers showed an antibacterial efficacy of 99.8 % and over against Staphylococcus aureus and Klebsiella pneumoniae at Ag-zeolite concentrations of 1 % and over, because of the presence of the silver nanoparticles in the zeolite.     

Preparation of Photocrosslinked Fish Elastin Polypeptide/Microfibrillated Cellulose Composite Gels with Elastic Properties for Biomaterial Applications

Photocrosslinked hydrogels reinforced by microfibrillated cellulose (MFC) were prepared from a methacrylate-functionalized fish elastin polypeptide and MFC dispersed in dimethylsulfoxide (DMSO). First, a water-soluble elastin peptide with a molecular weight of ca. 500 g/mol from the fish bulbus arteriosus was polymerized by N,N′-dicyclohexylcarbodiimide (DCC), a condensation reagent, and then modified with 2-isocyanatoethyl methacrylate (MOI) to yield a photocrosslinkable fish elastin polypeptide. The product was dissolved in DMSO and irradiated with UV light in the presence of a radical photoinitiator. We obtained hydrogels successfully by substitution of DMSO with water. The composite gel with MFC was prepared by UV irradiation of the photocrosslinkable elastin polypeptide mixed with dispersed MFC in DMSO, followed by substitution of DMSO with water. The tensile test of the composite gels revealed that the addition of MFC improved the tensile properties, and the shape of the stress–strain curve of the composite gel became more similar to the typical shape of an elastic material with an increase of MFC content. The rheology measurement showed that the elastic modulus of the composite gel increased with an increase of MFC content. The cell proliferation test on the composite gel showed no toxicity.     

Development of nanofibrous membranes with far-infrared radiation and their antimicrobial properties

This study investigated the incorporation of nanoscale germanium (Ge) and silicon dioxide (SiO₂) particles into poly(vinyl alcohol) (PVA) nanofibers with the aim of developing nanostructures with far-infrared radiation effects and antimicrobial properties for biomedical applications. Composite fibers containing Ge and SiO₂ were fabricated at various concentrations of Ge and/or SiO₂ using electrospinning and layered on polypropylene nonwoven. The morphological properties of the nanocomposite fibers were characterized using a field-emission scanning electron microscope and a transmission electron microscope. The far-infrared emissivity and emissive power of the nanocomposite fibers were examined in the wavelength range of 5-20 μm at 37 °C. The antibacterial properties were quantitatively assessed by measuring the bacterial reductions of Staphylococcus aureus, Klebsiella pneumoniae, and Escherichia coli. Multi-component composite fibers electrospun from 11 wt% PVA solutions containing 0.5 wt% Ge and 1 wt% SiO₂ nanoparticles exhibited a far-infrared emissivity of 0.891 and an emissive power of 3.44·102 W m^?2 with a web area density of 5.55 g m^?2. The same system exhibited a 99.9 % bacterial reduction against both Staphylococcus aureus and Escherichia coli, and showed a 34.8 % reduction of Klebsiella pneumoniae. These results demonstrate that PVA nanofibrous membranes containing Ge and SiO₂ have potential in medical and healthcare applications such as wound healing dressings, skin care masks, and medical textile products.     

Preparation of poly(vinyl alcohol)/ZrO2 composite nanofibers via co-axial electrospinning with higher ZrO2 particle content

Poly(vinyl alcohol) (PVA)/zirconium oxide (ZrO₂) composite nanofibers with a skin-core structure were prepared and the effect of ZrO₂ particle content on uniform web formation was investigated. The optimized polymer concentration, tip to collector distance, and applied voltage for electrospinning were 11 wt%, 12 cm, and 20 kV, respectively. Skin-core PVA/ZrO₂ composite nanofibers containing up to 12 wt% ZrO₂ were successfully prepared, but it was difficult to obtain PVA/ZrO₂ composite nanofiber webs via conventional electrospinning. Increasing the amount of ZrO₂ caused the morphology of the PVA/ZrO₂ composite nanofibers to become a non-uniform nanoweb with irregular nanofiber diameters. While it was difficult to obtain a uniform nanofiber web containing a content of ZrO₂ over 6 wt% for conventional electrospinning, a more uniform nanofiber web could be obtained at up to 9 wt% ZrO₂ using a skin-core dual nozzle. More uniform webs could also be obtained when ZrO₂ was in the skin rather than the core.     

Preparation and properties of polarizing films for liquid crystal display prepared using iodine vapor

The properties of polarizing films prepared using iodine vapor and using I₂/KI solution are compared to investigate the possibility of using vapor phase iodine adsorption in preparing polarizing film. The structure of PVA films drawn to different draw ratios and the amount of iodine adsorbed in drawn PVA films using iodine vapor were investigated. Increases in the degree of crystallinity, crystalline orientation index and birefringence with increase in draw ratio of PVA film, were observed by WAXD and polarizing microscope analysis. The amounts of iodine adsorbed by PVA film were 2–4 wt% for 20 min. UV-visible analysis suggests that I₃ ^? and I₅ ^? structures of iodine exist in the polarizing film after drawing in boric acid solution. Single transmittance and degree of polarization of polarizing films prepared using iodine vapor were about 30–50 % and over 99 %, respectively, at total draw ratios of over 3. The possibility of employing vapor phase adsorption of iodine instead of solution adsorption to prepare commercial polarizing film is suggested.     

Effect of aldehydes crosslinkers on properties of bacterial cellulose-poly(vinyl alcohol) (BC/PVA) nanocomposite hydrogels

The effects of the aldehydes crosslinkers on properties of the BC/PVA nanocomposite hydrogels were investigated. BC as the reinforcement and PVA as the matrix materials of the BC/PVA nanocomposite hydrogels, the hydrogels were prepared in coagulating bath of sodium sulfate and cross-linked with kinds of aldehydes. The hydrogels were characterized by Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), Equilibrium swelling ratio (ESR) tests, mechanical properties tests, thermo-gravimetric analysis (TGA) and X-ray diffraction (XRD) analysis. It was found that the dialdehyde (glyoxal, glutaraldehyde) crosslinkers were more efficient than monoaldehyde (formaldehyde, acetaldehyde) crosslinkers. The ESR, mechanical properties of the BC/PVA nanocomposite hydrogels were obviously influenced by aldehydes crosslinkers. However, their thermo stability and crystallinity were scarcely influenced. The nanocomposite hydrogels described in this study provides information for further development and optimization of a variety of nanofiber-polymer matrix composite hydrogels.     

Eco-friendly Production of Metallic Nanoparticles in Polymeric Solutions and Their Processing into Biocompatible Composites

Silver and gold nanoparticles were produced and embedded in poly(vinyl alcohol) (PVA) and chitosan (CTS) solutions by the photoreduction of metallic salt precursors triggered by direct sunlight irradiation, in which the polymers acted as reducing, dispersing and stabilizing agents. Sunlight photoreduction can be standardized using a constant UV index regardless of the season. This strategy was found to be an improvement over other common energy sources used to trigger the reduction of metal ions, including UV light irradiation and high-temperature reduction with mechanical stirring. The resulting PVA/metal nanoparticle and CTS/metal nanoparticle composite solutions were processed into thin films and nanofiber composites. In vitro testing of the cytotoxicity and biocompatibility demonstrates that the film composites are non-toxic and biocompatible with the HT-29 human colon cancer cell line. Promotion of HT-29 cell growth using our hybrid composites was observed, in contrast to other studies in which colloidal NPs were tested. Therefore, a sustainable approach for the onestep preparation of biocompatible polymer/metallic nanoparticle composites is reported.     

Mechanical,Thermal, and Swelling Properties of Cross-linked Hydrogels Based on Oxidized Cellulose Nanowhiskers and Chitosan/poly(vinyl alcohol) Blends

Cross-linked hydrogels of chitosan/poly(vinyl alcohol) (PVA)/oxidized cellulose nanowhiskers (CNWs) were prepared by using oxidized CNWs as a cross-linker. The effects of the oxidation level of CNWs on the swelling behavior, thermal stability, viscoelastic properties and compressive strength of the hydrogels were studied. Chemical cross-links, hydrogen bonds, as well as nanofiller reinforcement between the three materials played a major role in determining the properties of the hydrogels. Swelling test results showed that the incorporation of oxidized CNWs decreased the water absorbability of the hydrogels due to the increase in cross-linking degree. Viscoelastic properties of the hydrogels with oxidized CNWs was increased by 537 % in storage modulus, from 4.65 kPa to 29.6 kPa. Compressive strength of 181.5 kPa at 50 % strain was observed from the cross-linked hydrogels, compared with 21.2 kPa of the non-cross-linked hydrogels. The thermal experiments showed that the chemical cross-linking slightly increase the resistance toward thermal degradation of the hydrogels.     

UV-induced coloration of cotton fabrics by photografting of acrylamido dyes using acrylamide as a comonomer

Formulations of acrylamido dyes containing comonomers can be photografted onto cotton fabric upon UV irradiation at room temperature without neutral salts, which makes it a novel coloration process of excellent environmental friendliness. The photografting of the dyes can be assisted by the copolymerization of the acrylamide comonomer which may reduce the steric hindrance of the bulky dyes. About 90 % of the dyes and 94 % of the acrylamide are photopolymerized in the solution and the degree of polymerization is estimated to be 13.2 according to ¹H-NMR and MALDI-TOF mass analyses. The optimal K/S values of the grafted cotton fabrics showed 13.3 and 12.3 for red and yellow dyes, respectively. The optimal UV-grafting coloration can be achieved when a UV energy of 25 J/cm² was irradiated on the padded fabrics with a formulation of 0.65 mole ratio of acrylamide to the dyes, 7 wt% acetophenone photoinitiator (Irgacure 2959) based on the dye weight under pH 6. Furthermore, the color fastness properties of the grafted fabric were superior to those of conventional reactive dyeing of the dyes due to higher molecular weight of the polymerized dyes.     

Surface modification of cellulose fibers by layer-by-layer self-assembly of lignosulfonates and TiO2 nanoparticles: Effect on photocatalytic abilities and paper properties

Depositing of TiO₂ nanoparticles on cellulose fiber surface has potential technological applications in the field of photocatalysis. With this motivation, multilayers composed of lignosulfonates (LS) and TiO₂ nanoparticles were constructed on cellulose fiber surface via layer-by-layer (LBL) self-assembly technique. X-ray photoelectron spectroscopy (XPS), zeta potential measurement and atomic force microscopy (AFM) were used to characterize the LS/TiO₂ multilayers on cellulose fiber surface. Moreover, the photocatalytic activities of modified cellulose fibers (decomposition of methyl orange and antibacterial test) were investigated. The decomposition efficiency of methyl orange for a (LS/TiO₂)₅ multilayer modified cellulose fibers was 74.7 % under 5 h UV irradiation. Photocatalytic decomposition efficiency of methyl orange by LS/TiO₂ multilayer modified cellulose fibers under the same UV irradiation time increased linearly with the number of bilayers. Antibacterial tests results revealed that the cellulose fibers modified with LS/TiO₂ multilayers exhibited excellent antibacterial activity against E.coil. The degree of E.coil growth inhibition for a (LS/TiO₂)₅ multilayer modified cellulose fiber reached as high as 93 %. In addition, the effect of LS/TiO₂ multilayers on properties of handsheets made from modified cellulose fibers was also considered. The air permeability of the handsheet prepared from fibers modified with TiO₂/LS multilayers had 6.1–24.3 % higher compared with that of handsheet prepared from original fibers. The wetting properties measurement results demonstrated that the water contact angle of handsheet oscillated with the increasing number of layers depended on building block which was in the outermost layer.     

In-situ preparation of multi-walled carbon nanotube (MWNT)/cellulose nanocomposites and their physical properties

The multi-walled carbon nanotube (MWNT)/cellulose nanocomposites were prepared by using monohydrated Nmethylmorpholine-N-oxide (NMMO) as a solvent for dispersing the acid-treated MWNTs (A-MWNTs) as well as for dissolving the cellulose. The A-MWNTs were well dispersed in both monohydrated NMMO and the nanocomposite films. The nanocomposite films were prepared by a film-casting method onto a glass plate. The tensile strain at break, Young’s modulus, and toughness of nanocomposite films increased by ～5, ～2 and ～12 times, respectively at ? (A-MWNT content in the nanocomposite)=0.8 wt%, as compared to those of the pure cellulose film. The thermal degradation temperature of the nanocomposite films also increased from 329 to 339 oC by incorporation of 1 wt% A-MENTs. The electric conductivities of the A-MWNT/cellulose nanocomposites at ? =1 and 10 wt% were 2.09×10^?5 and 3.68×10^?3 S/cm, respectively. The transmittances were 86, 69 and 55 % at 550 nm for 0.4, 0.8 and 1 wt% nanocomposite films, respectively. Thus, these nanocomposites are promising materials in terms of all the properties studied in this paper and can be used for many applications, such as toughened cellulose fibers, transparent electrodes, etc.     

Investigation of a-PVA/s-PVA hydrogels prepared by freezing-thawing method

The hydrogels of atactic poly (vinyl alcohol) (a-PVA) and syndiotactic poly (vinyl alcohol) (s-PVA) with different blend ratios were prepared by freezing-thawing processes. The effect of s-PVA on gelation behavior of the blend was investigated in terms of gelation temperature (T _gel) and hydrogel melting temperature (T _gm). And swelling behavior, crystallization, thermal properties, morphology of the blend hydrogels were also studied. With the increase of s-PVA, T _gel of the blend solution and T _gm of the blend hydrogels increase. Both crystallinity and crystallite dimensions based on the XRD profiles are nearly monotonically increasing functions of s-PVA content. FTIR results indicate the number of hydrogen bonds raises with s-PVA increasing. DSC results demonstrate s-PVA favors improvement of hydrogels thermal stability. According to SEM images of hydrogels, the increase of cross-linking caused by s-PVA in the blend hydrogels results in denser structure, which in turn leads to increased gel fraction (G) and Hardness. 50/50 (a-PVA/s-PVA) blend hydrogel has a denser structure with EWC of 73.6 %, hardness of 22.8 HA and T _m of 236.15 °C. The result indicates blending a-PVA and s-PVA is a useful method to form the hydrogel having good thermal stability and relative high degree of swelling.     

LED-UV grafting of vinylsulfone dyes onto photo-oxidized wool fabrics

Photografting coloration of wool was carried out under UV-LED irradiation at room temperature using aqueous vinylsulfone dye solution containing vinylsulfonic acid as a comonomer. UV-LED irradiation of the 395 nm emission is more energy efficient, less damaging to the dyes, and much safer to human eyes compared with polychromatic mercury UV lamps. However, in case of the UV-LED lamps, the wool needs to be photo-oxidized either by UV/ozone or polychromatic UV irradiation before the dye photografting. The surface treatments increased the sulfur and oxygen contents in the modified wool surfaces. While the optimally photografted wool fabrics under the UV-LED lamp yielded a K/S value of 9.9, the K/S of the grafted wool increased to 25.2 and 13.6 after the UV/Ozone or polychromatic UV preoxidation at UV energies of 10.6 J/cm² and 25 J/cm² respectively. The color fastness properties of the photografted fabrics were far better than with those of the conventionally reactive-dyed fabrics, implying that the high-molecular-weight photografted dyes seemed to be more durable than the low-molecular dyes.     

Preparation and characterization of jute fabrics reinforced urethane based thermoset composites: Effect of UV radiation

Jute fabrics reinforced thermoset composites were prepared with different formulations using urethane acrylate oligomer, methanol, and benzyl peroxide. Jute fabrics were soaked in the prepared formulations and fiber content in the composites was optimized with the extent of mechanical properties. Among all the resulting composites, 55 wt% jute content at oligomer:methanol:benzyl peroxide=75:24.5:0.5 (w/w/w) ratio showed best mechanical properties. The optimized jute fabrics were cured under UV radiation at different intensities and their mechanical properties were measured. Jute fabrics were treated with potassium permanganate (KMnO₄) solution of different concentrations (0.01, 0.02, 0.03, and 0.05 wt%) for different soaking times (1–5 min) before the composite fabrication. Optimized jute fabrics (jute fabrics treated with 0.02 wt% KMnO₄ for 2 min soaking time) were soaked in the optimized formulation and cured under UV radiation at different intensities and measured their mechanical properties. Scanning electron microscopic investigation showed that surface modification improves fiber/matrix adhesion. Water uptake and soil degradation test of the treated and untreated composite samples were also performed.     

Photocatalytic degradation of formaldehyde by silk mask paper loading nanometer titanium dioxide

Silk mask paper with different adsorbability was prepared by changing the beating degree of silk pulp and the basis weight of silk paper, and photocatalytic silk mask paper was prepared by loading nanometer titanium dioxide (nano-TiO₂) on the silk mask paper, then degradation of formaldehyde by silk mask paper loading nano-TiO₂ under daylight lamps and ultraviolet lamps were investigated, respectively. Results showed that silk mask paper could adsorb formaldehyde and had higher adsorption efficiency in the initial stage, and the adsorption/desorption equilibrium could be basically achieved in 60 minutes. The adsorption capacity of silk mask paper made from silk pulp with beating degree of 45 ^oSR was relatively low, and it increased with the increase of beating degree, but there was little change in adsorption when the beating degree of silk pulp exceeded 65 ^oSR. Under daylight lamps, 26.61 %, 31.42 % and 38.21 % of formaldehyde could be degraded in 180 minutes by silk mask paper loading 1 wt%, 3 wt% and 5 wt% nano-TiO₂, respectively. However, under ultraviolet (UV) lamps, 46.23 %, 55.47 % and 66.38 % of formaldehyde could be degraded within the same time, respectively. More formaldehyde could be degraded by photocatalytic silk mask paper under UV lamps than under daylight lamps, and the more the load of nano-TiO₂ on the silk mask paper, the higher the degradation rate of formaldehyde within the same time.     

Preparation of TiO<Subscript>2</Subscript>-coated ZnO Nanoparticles and Their Effect on the UV Absorption of a Poly(vinyl alcohol) Composite Film

Titanium oxide (TiO₂) and zinc oxide (ZnO) composite structured nanoparticles were prepared by combining a sol-gel process and a solvothermal method. Titanium (IV) isoproxide (TTIP), used as a TiO₂ precursor, was dissolved in a colloidal ZnO nanoparticle solution synthesized by the sol-gel method, and TiO₂ was synthesized via solvothermal synthesis onto the ZnO nanoparticles. The effects of reaction conditions such as pH, reaction temperature, and reaction time on the morphology of the composite nanoparticles and the ultraviolet (UV) absorbance of their polymer composite films were investigated. The UV absorption of the poly(vinyl alcohol) (PVA) composite film with TiO₂-coated ZnO nanoparticles was higher than that of the TiO₂, ZnO, and ZnO-coated TiO₂ composite films. The reaction pH was found to have the strongest influence on the UV absorbance of the PVA/(TiO₂/ZnO) composite film. A pH of 7.0, reaction temperature of 250 °C, and reaction time of 24 h were the optimum conditions for UV absorption.     

Electrospun curcumin loaded poly(lactic acid) nanofiber mat on the flexible crosslinked PVA/PEG membrane film: Characterization and <Emphasis Type="Italic">in vitro</Emphasis> release kinetic study

Herein, a biodegradable and biocompatible composite comprising of support membrane based on crosslinked PVA/PEG film and curcumin loaded electrospun poly(lactic acid) (PLA) nanofiber mat is introduced. The membrane film was prepared from PVA/PEG blend followed by crosslinking with an optimum amount of citric acid, 15 wt.%. After then, PLA solutions with different curcumin content, 0-11 wt.%, were electrospinned on the prepared membrane substrate. The prepared film showed high water absorption, water vapor transmission rate and superior mechanical properties with improved elastic modulus, tensile strength and with an elongation of around 320 % with respect to the non-crosslinked one. Also, the scanning electron microscopy was revealed uniformly dispersed pores throughout the membrane film with a nearly narrow in size distribution centered at 36 μm. As well, a nanostructure porous morphology was found for the electrospun fibrous curcumin loaded PLA from the scanning electron microscopy micrographs and the average fiber diameter was decreased with curcumin content. In vitro drug release from the prepared flexible composite into the vertical diffusion cell was recorded by the measuring curcuminoids content using high performance liquid chromatography and drug release kinetic evaluations were revealed that the release pattern of all prepared samples, containing different content of curcumin, well fitted to the Higuchi’s model signifying diffusion-controlled release mechanism. As well, the determined release rate at the second release stages, i.e. steady state flux (J), was varied from 0.31 to 43.53 μg·cm^-2·h^-1 with increasing drug content from 1 to 11 wt.%. Regarding this results, this flexible composite by providing the moist environment along with miraculous healing properties of curcumin, can be potential candidate for transdermal drug delivery.     

pH sensitive and controlled release system based on cellulose nanofibers-poly vinyl alcohol hydrogels for cisplatin delivery

Delivery of chemotherapy drugs, such as cisplatin, with controlled manner is a significant area of research in cancer treatment. The main purpose of this study was to investigate the in-vitro release of cisplatin from pH sensitive and controlled release hydrogels based on cellulose nanofibers (CNFs) and poly(vinyl alcohol) (PVA). Various hydrogels with different amounts of CNFs were prepared. This novel drug delivery system was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses. By in-vitro experiments the influence of CNFs contents and pH of the release media on the release rate of the drug were investigated. According to the results, the hydrogel containing 1 wt% CNFs in the release media with the pH of 7.4, efficiently sustained the drug release and so can cause to the reduction of side effects of drug. By fitting the experimental data with various kinetic models it was concluded that the release mechanism is best fitted by Korsmeyer-Peppas kinetic model suggesting the diffusion controlled release mechanism. The prepared hydrogel system is suitable for delivery of cisplatin in the small intestine with a controlled manner.     

The effect of multi-walled carbon nanotubes on the molecular orientation of poly(vinyl alcohol) in drawn composite films

Poly(vinyl alcohol) (PVA)/multi-walled carbon nanotube (MWNT) composite films were prepared by casting a DMSO solution of PVA and MWNTs, whereby the MWNTs were dispersed by sonication. A significant improvement in the mechanical properties of the PVA drawn films was achieved by the addition of a small amount of MWNTs. The initial modulus and the tensile strength of the PVA drawn film increased by 30% and 45% respectively, with the addition of 1 wt% MWNTs, which are close to those calculated from the rule of mixtures, and were strongly dependent upon the orientation of the PVA matrix. The mechanical properties, however, were not improved with a further increase in the MWNT content. The orientation of MWNTs in the composite was not well developed compared to that of the PVA matrix. This result suggests that the improvement of the molecular orientation of the PVA matrix plays a major role in the increase of the mechanical properties of the drawn PVA/MWNT composite films.     

Functionalization of the aquatic weed water hyacinth <Emphasis Type="Italic">Eichhornia crassipes</Emphasis> by using zinc oxide nanoparticles for removal of organic dyes effluent

In this study, purified Eichhornia crassipes dead biomass, coated biomass with ZnO nanoparticles (NPs) and one coated with both ZnO NPs and polyethylenimine (PEI) were successfully fabricated as a bioadsorbent and biodegradent of organic dyes from the textile dye effluent. These ZnO NPs are capable of enhancing the dispersability and adsorption capacity of PEI and the anionic dyes. The surface analyses of Eichhornia crassipes, Eichhornia crassipes/ZnO NPs and Eichhornia crassipes/ZnO NPs/ PEI were characterized by SEM, specific surface area and micropore volume. The effect of three parameters including Eichhornia crassipes concentration, dye concentration and contact time on the color removal percent and degradation percent were evaluated. The results showed that the bleached Eichhornia crassipes was an efficient adsorbent for cationic dyes. Also, the effectiveness of Eichhornia crassipes/ZnO NPs was employed as photocatalytic agent for the degradation of C.I. Direct Red 23 in the presence and absence of UV irradiation. Moreover, Eichhornia crassipes/ZnO NPs/PEI shows a high adsorption capacity toward the anionic dyes C.I. Acid Red 40 and C.I. Reactive Orange 91. It was found that, Eichhornia crassipes/ZnO NPs was completely degraded C.I. Direct Red 23 by >90 % within 90 min of UV irradiation time, whereas in the absence of UV irradiation it required a substantially longer time (120 min) to achieve a similar degradation percent. In addition, Eichhornia crassipes/ZnO NPs/PEI was most effective and show the maximum adsorption capacity for C.I. Reactive Orange 91 and C.I. Acid Red 40 and its efficiency for the color removal percent was 100 % for C.I. Reactive Orange 91 and 95 % for C.I. Acid Red 40 in less than 60 min processing time.