Eco-friendly dyeing using natural mordant extracted from <Emphasis Type="Italic">Emblica officinalis G</Emphasis>. Fruit on cotton and silk fabrics with antibacterial activity

Emblica officinalis G. dried fruit tannin was extracted and applied as a natural mordant alone and in combination with metal mordant namely copper sulphate for dyeing on cotton and silk fabrics using natural dyes. The color strength, color-coordinates, wash and light fastness were also evaluated for cotton and silk fabrics with and without mordanting. The pre-mordanted cotton and silk fabrics on dyeing gave better color strength, wash and light fastness than those dyeing obtained without mordanting. The total phenolic content of the extract was calculated. Cotton and silk fabrics resulted in good antibacterial activity using the Emblica officinalis G. mordant. When mordant was used along with 0.5 and 1 % copper sulphate mordant and the activity enhanced and was active up to 20 washes.     

A novel eco-friendly colorant and dyeing method for poly(ethylene terephthalate) substrate

Although madder (Rubia tinctorum) has been used as a well-known natural textile dye source for dyeing of natural fibers such as wool, silk and cotton, 100 % polyester dyeing with madder is not common. In this study, polyester samples were dyed with madder at different dyeing temperatures, from 60 °C to 130 °C, in company with 7 chemical and 5 natural mordants. Color properties and rub, light and wash fastness performances were investigated. Different shades of orange, brown, pink and reddish green colors were obtained. Dyeing at 130 °C exhibited the highest color yield, the highest chroma and the lowest lightness values. Overall, chemical mordants exhibited higher color yields than natural mordants. High wash fatness, moderate light and rub fastness levels were observed. The potassium bitartrate and gallnut, a natural mordant, exhibited the best results. The madder dyeing of polyester should be carried out at hot temperature conditions, 130 °C, in order to obtain the highest achievable color yield and chroma with the highest light and wash fastness properties.     

Dyeing of cotton and silk yarn with the extracted dye from the fruit hulls of mangosteen,<Emphasis Type="Italic">Garcinia mangostana</Emphasis> linn

The extracted dye from the dried fruit hulls of mangosteen was used as a natural dye for the dyeing of cotton and silk yarn. The optimal conditions for dye extraction were to extract the dried fruit hulls of mangosteen at 80°C for 1 hour with a 15 % w/v citric acid solution in a 1:4 ratio of mangosteen powder to solvent. Cotton dyeing with the extracted dye from the dried fruit hulls of mangosteen was carried out at 60°C for 60 minutes with a material to liquor ratio of 1:25. The effect on dyeing of mordant type with different mordanting methods was studied. The results showed that the dyeing of cotton using the post-mordanting method with ferrous sulfate and calcium hydroxide not only provided better depth of shade but also provided better wash fastness and light fastness than with other mordants (alum; zinc tetrafluoroborate) or without a mordant. Good fastness properties were also obtained using a post-mordanted silk with calcium hydroxide.     

Dyeing and fastness properties of a reactive disperse dye on PET, nylon, silk and N/P fabrics

Dyeing and color fastness properties of a reactive disperse dye containing an acetoxyethylsulphone group on PET, Nylon, silk and N/P fabrics were examined. The reactive disperse dye exhibited almost the same dyeing properties on PET fabric as a conventional disperse dye except the level of dye uptake. The most appropriate pH and dyeing temperature for the dyeing of Nylon fabric were 7 and 100°C respectively. The build-up on Nylon fabric was good and various color fastnesses were good to excellent due to the formation of the covalent bond. Application of the reactive disperse dye on silk fabric at pH 9 and 80°C yielded optimum color strength. The rate of dyeing on Nylon fabric was faster than that on PET fabric when both fabrics were dyed simultaneously in a dye bath, accordingly color strength of the dyed Nylon was higher. The reactive disperse dye can be applied for one-step and one-bath dyeing of N/P mixture fabric with good color fastness.     

Dyeing characteristics of Nylon,cotton and N/C mixture fabrics with reactive-disperse dyes containing a sulphatoethylsulphone group

The dyeing and color fastness properties of three reactive-disperse dyes containing a sulphatoethylsulphone group on Nylon, cotton and N/C mixture fabrics were examined. Reduction-clearing was more effective in removing the unfixed dyes than soaping since the reactive-disperse dye became hydrophobic during dyeing process. Nylon was dyed well with three reactive-disperse dyes at pH 5∼8 and difference in chemical structure between dyes did not affect the final color strength of the dyed Nylon fiber, but their build-up properties on Nylon were not so good. The color strength of the dyed cotton was not as high as that of Nylon. The color strength of cotton increased by lowering dyeing temperature when the reactive-disperse dyes having hydroxy group were used. Nylon absorbed more dye molecules than cotton in simultaneous dyeing, the color difference between Nylon and cotton could be reduced as the dyeing temperature decreased. N/C mixture fabric was dyed well at 60 °C with the reactive-disperse dyes having hydroxyl group when applied at pH 7 and 60 °C, and their build-up properties were good. It was also found that washing fastness and rubbing fastness of dyed Nylon, cotton and N/C fabrics with the reactive-disperse dyes were excellent, while light fastness was moderate.     

Curcuma Dye with Modified Treatment Using Chitosan for Superior Fastness

Curcuma dye could never gain popularity in natural dyeing as the intrinsic nature of the colorant Curcumin did not have the requisite adhering property towards natural fabrics such as silk and cotton, thereby making it very fugitive. In this paper attempts have been made to activate Curcumin molecule by complexation with chitosan (another natural linear polysaccharide). The binding took place at intrinsic pH (7–8) very effectively without any surfactant or enzyme. Dyeing with this new composite showed excellent wash and light fastnesses as compared to curcuma dye. The novelty of this dyeing process is the remarkable enhancement of wash and light fastnesses levels by 1.0–1.5 for silk and cotton fabric dyeing in just 1 hour at 40–45 °C. It is fast and energy conserving dyeing process. Three subsequent washing of the dyed samples showed very small change in CIE Lab.     

Superfine pigment dyeing of silk fabric by exhaust process

The surface of silk is modified by a cationic reagent, N-(3-chloro-2-hydroxypropyl) trimethylammonium chloride(CHTAC) in order to enable the fibre to be dyed with superfine pigments by an exhaust process. The effects of cationization pretreatment conditions such as the amount of cationic reagent, pH, treatment temperature and time on color yield are discussed in detail. The result shows that the condition suitable for modification treatment is that the concentrationc of cationic reagent is 10 g/l, pH 8, liquor to goods ratio of 100:1 and 60°C for 30 min. The white index decreases with the increase of alkali of cationic treatment. The crock fastness and wash fastness of silk dyed by pigment exhaust dyeing achieve 3–4 and 4 scale, respectively. The treated silk fabrics still retain a soft handle because the bending rigidity B and hysteresis 2HB increase slightly after cationization pretreatment and dyeing procedure. It has been demonstrated that properties of surface modified silk dyed with superfine pigment by exhaust process are acceptable.     

Effect of Silver Particle size on color and Antibacterial properties of silk and cotton Fabrics

In this study silver nanoparticles with different particle sizes and hence colors were synthesized on silk and cotton fabrics through reduction of silver nitrate. Particle sizes of the silver colloids were measured by dynamic light scattering (DLS). The structure and properties of the treated fabrics were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and UV-Vis reflectance spectroscopy. Various characteristics of the treated fabrics including antibacterial activities against a Gram positive (Staphylococcus aureus) and a Gram negative (Escherichia coli) bacteria, color effect, wash and light fastness, water absorption, fabric rigidity, and UV blocking properties were also assessed. The results indicated that the treated fabrics displayed different colors in the presence of silver nanoparticles with different particle sizes and exhibited good and durable fastness properties. Also, the size of the silver particles had a tangible effect on antibacterial activity of treated fabrics and its antibacterial performance was improved by decreasing the size of particles. Moreover, this process imparted significantly UV blocking activity to fabric samples.     

Dyeing properties of nylon,PET, and N/P mixture fabric with reactive-disperse dyes having a sulfatoethylsulfone group

The dyeing and color fastness properties of two reactive-disperse dyes containing a sulfatoethylsulfone group on nylon, PET and N/P mixture fabrics were examined. The rate of dyeing on nylon fabric was greatly dependent upon dye bath pH. The final dye uptakes at all pH, however, were as high as 97 %. Color strength of the dyed nylon fabric linearly increased up to 0.5 %owf and then slowed down over 1 %owf dyeing. Washing and rubbing fastness of the dyed nylon fabric were excellent, but grade of light fastness was moderate. Dyeability of the reactive-disperse dyes on PET fabric was not much affected by pH, and K/S values of PET fabric dyed at pH 5–8 were lower than those of nylon fabric at all pH examined. Buildup and color fastnesses properties on PET fabric showed the same tendency with nylon fabric. The rate of dyeing of the reactive-disperse dyes on nylon fabric was faster than on PET fabric when both fabrics were dyed simultaneously in the same dye pot, resulting in higher color strength of nylon than PET. The reactive-disperse dyes were found to be adequate to the one-bath, one-step dyeing of N/P mixture fabric when applied at pH 5 and 120 °C.     

Application of <Emphasis Type="Italic">Sterculia Foetida</Emphasis> Fruit Shell Waste Biomolecules on Silk for Aesthetic and Wellness Properties

There has been growing interest in the use of bioresource waste for natural dyeing and finishing. This paper discusses dye extraction from the novel source fruit shell waste of Sterculia foetida and its application on mulberry silk fabric to confer aesthetic coloration and wellness properties such as ultra-violet (UV) protection and antibacterial properties. Treated fabrics showed a substantial increase in color depth and adequate wash, light, and rubbing fastness properties for dyed silk fabrics with and without mordanting. Pre-and post-mordanting of silk fabrics were carried out using mordants such as alum, harda (myrobalan), and copper sulfate. UV-visible spectrophotometric analysis of fruit shell extract (FSE) at different pHs and FSE with three different mordants at neutral pH was used to understand the phenomena of dye-fiber interaction. The treated fabrics characterised by ATR-FTIR, SEM-EDS, and XRD analysis indicate the nature of dye fiber interaction justifying the multifunctional properties. The treated fabric also showed very good ultraviolet protection property and antibacterial properties both against S. aureus and E. coli bacteria even after ten washes. The results indicate that Sterculia foetida fruit shell extract offers an excellent potential as coloration, antibacterial, and ultraviolet protective agent for mulberry silk fabric.     

Reversible and washing resistant textile-based optical pH sensors by dyeing fabrics with curcuma

Curcuma powder was used to dye cotton and polyamide 6,6 fabrics in order to produce textile-based optical pH sensors. Both fabrics showed a bright yellow color after dyeing and demonstrated color changes (towards red) when contacted with basic solutions. Color change and sensitivity differ for cotton and for polyamide. Curcuma-dyed cotton shows color changes in particular in the range of pH between 6.5 and 8.5, whilst curcuma-dyed polyamide shows a wider pH range: from 8.5 to 13.0. The stability of pH sensing to washing was evaluated. Three different kinds of washing agents were used in order to simulate the real life conditions of a garment or a cloth. Standard test methods were used when available for washing tests. The pH sensing of the curcuma-dyed fabrics demonstrated an excellent fastness to all kinds of washing. Ionic strength of the solution does not affect the color changes. Moreover, color reversibility of the fabrics was proven, too. Color change and reversibility of the fabrics was assessed by an UV-visible spectrophotometer. Spectral changes were observed at 540 nm for curcuma-dyed cotton, and at 487 and 574 nm for polyamide.     

Natural dye extraction from waste barks of Turkish red pine (Pinus brutia Ten.) timber and eco-friendly natural dyeing of various textile fibers

In this study, a natural dye extraction was carried out to isolate dyestuff extract powder from the waste barks of Turkish red pine (Pinus brutia Ten.) timber which is not a common natural dyestuff source. The natural dyestuff powder obtained was applied to cotton, flax, wool, silk, tencel, polyamide and acrylic fibers accompanied by simultaneous application of alum and natural oak ash mordants. Color properties were investigated including rub-, light- and wash-fastness performance. Differently dyed fiber samples exhibited slightly different shades of beige, brown and brownish-yellow depending on the mordant used and fiber type. Alum mordanted samples exhibited better color properties. The highest (63.4) and the second highest (45.3) f(k) color yield values were observed for alum mordanted silk and wool samples, respectively. Dyed fabrics showed excellent wash fastness, very low staining performance, and moderate light- and rub-fastness.     

Extraction of natural dye from <Emphasis Type="Italic">Coreopsis tinctoria</Emphasis> flower petals for leather dyeing − An eco-friendly approach

This study evaluated the extraction of two colors of dye (yellow and brown) from Coreopsis tinctoria flower petals using ultrasound and the dyeing of leather with the extracted dyes as a source of nontoxic and eco-friendly dye. The results showed an increase in the dye extraction values with increasing time at 100 W ultrasonic power at 80 °C for 1 h. Leather dyeing was optimized with the aid of ultrasound and magnetic stirring. The optimum leather dyeing conditions, with respect to the dye uptake, dye penetration and intensity of the color, were determined to be 12 % dye concentration, 100 W power, 1,000 rpm, and pH 7.0 for 60 min at 80 °C. It was shown that sonication improves dye exhaustion from a 90 % to 60 % rating for 1 h of dyeing time. The dyed leather was assessed by reflectance measurements and compared with visual assessment data. The fastness properties of dyed leather samples showed good fastness against washing, light, and dry and wet rubbing. The strength properties were not significantly altered and the bulk properties, such as softness, were found to be improved by the use of Coreopsis tinctoria yellow and brown dyes using an ultrasonic and magnetic stirring dyeing process.     

Dyeing of synthetic fabrics in water using azoic dyes based on boronic acid derivatives

Development of water-soluble dyes for the dyeing of different textile fabrics is essential for the textile industry due to ecological and economical reasons. In this study, a series of new azoic dyes were prepared by diazotization reaction between the phenyl boronic acid and different aniline derivatives, and their dyeing capacity in aqueous solution was evaluated. The synthesized boronic azo dyes present good water solubility and can dye polyamide (nylon), wool, silk, and cellulose acetate fabrics. The effect of factors such as concentration of dye, dyeing temperature, and pH on the level of color strength (K/S) was studied. The dyeing results showed that higher color strength K/S (about 16) and fastness properties (about 4/5) with boronic acid dyes were achieved at higher temperatures avoiding the use of surface agents, mordants, and other polluting chemical additives.     

Actinomycin X2, an Antimicrobial Depsipeptide from Marine-Derived Streptomyces cyaneofuscatus Applied as a Good Natural Dye for Silk Fabric

Actinomycins as clinical medicine have been extensively studied, while few investigations were conducted to discover the feasibility of actinomycins as antimicrobial natural dye contributing to the medical value of the functional fabrics. This study was focused on the application of actinomycin X2 (Ac.X2), a peptide pigment cultured from marine-derived Streptomyces cyaneofuscatus, in the dyeing and finishing of silk fabric. The dyeing potential of Ac.X2 with silk vs. cotton fabrics was assessed. As a result, the silk fabric exhibited greater uptake and color fastness with Ac.X2. Through Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) analyses, some changes of chemical property for the dyed fabric and Ac.X2 were studied. The silk fabric dyed with Ac.X2 exhibited good UV protection ability. The antibacterial properties of dyed and finished silk were also evaluated, which exhibited over 90% antibacterial activity even after 20 washing cycles. In addition, the brine shrimp assay was conducted to evaluate the general toxicity of the tested fabric, and the results indicated that the dyed silk fabrics had a good biological safety property.     

Natural dyeing of cotton with <Emphasis Type="Italic">Xylocarpus granatum</Emphasis> bark extract: Dyeing,fastness, and ultraviolet protection properties

In this research we investigated the dyeing of cotton fabrics with extracts of Xylocarpus granatum, a mangrove plant with a long history of use in leather tanning and textile dyeing. X. granatum bark was extracted and spray-dried, yielding a tannin-rich, reddish-brown powder. This powder proved a suitable colorant for the natural dyeing of cotton with promising color fastness properties to wet treatments (washing, water, sea water, and perspiration), hot pressing, crocking, and light exposure. However, the dye alone produced only weak levels of coloration and therefore metallic salt mordants were employed to improve the color strength, through the formation of insoluble tannate complexes. The resulting fabric K/S values were dependent on the mordant used and exhibited the following trend: ferric sulfate > sodium dichromate > copper sulfate > potassium aluminum sulfate > no mordant, for fabrics exposed to mordants before and after dyeing. Mordanting resulted in slight variations in shade and color fastness. In most cases, the color fastness properties were preserved, except for color fastness to light and hot pressing, for which lowered ratings were found for some mordants. Stiffness and mechanical performance were not greatly affected by dyeing or mordanting, except for sodium dichromate mordanting which significantly stiffened and weakened the fabric. The ultraviolet protection factor (UPF) of all the dyed samples achieved the maximum (50+) level, highlighting the excellent UV shielding properties of the fabric. Overall, X. granatum bark extract is a promising, effective colorant for the natural dyeing of cotton in terms of appearance, fastness, and physical characteristics.     

Study on the dyeing of wool fabrics with Phytolacca berry natural dyes

Dyeing of wool fabrics with natural dyes from Phytolacca berries has been studied. The effect of dye concentration, dye bath pH, dyeing time and temperature were discussed. The influence of chitosan application on the dyeing properties of wool fabrics was investigated. The SEM photographs of chitosan treated wool fabrics clearly depict the deposition of chitosan on the fibers. The effect of chitosan concentration, dye bath pH, dyeing time and temperature has been studied by orthogonal experiment. It has been proved that the dyed wool samples pretreated by chitosan have higher color fastness, faster dyeing rate, and better antibacterial properties compared with untreated ones.     

UV-grafting coloration of cotton and wool fabrics using bismethacrylated quinizarin dye

A novel bifunctional quinizarin dye possessing two photoactive methacrylate groups was synthesized by the reaction of quinizarin with methacryloyl chloride. The synthesized dye, a low substantive dye under the conventional dyeing process, can be photografted onto cotton and wool fabrics at room temperature without neutral salts, which makes it a novel coloration process of excellent environmental friendliness. The concurrent polymerization and grafting of the synthesized dye onto cotton or wool can be assisted by a photoinitiator and acrylic acid in the case of cotton grafting. Moreover, color yields of the grafted fabrics improved significantly with the photografting of the bifunctional dye. The bifunctional dye can be photopolymerized with the increase in UV energy to 25 J/cm² and the oligomeric dye has a degree of polymerization of 5 or more. Furthermore, the color fastness properties of the grafted fabrics were superior to those of the dyed fabrics via exhaustion.     

Colorimetric studies of benzoquinoline based hot brand monoazo reactive dyes and their dyeing performance on various fibers

A series of hot brand monoazo reactive dyes (9a-l) were obtained by the coupling of diazotized 1Hbenzo[ g]pyrazolo[3,4-b]quinoline-3-ylamine (5) with various cyanurated coupling components (8a-l) in good yield. Synthesized dyes were characterized by various spectroscopic techniques. Their dyeing performances as reactive dyes have been assessed on silk, wool, and cotton fabrics. The percentage dye bath exhaustion and fixation on different fibers were found to be very good. The dyed fabric showed moderate to very good light fastness and good to excellent washing and rubbing fastness properties. Spectral properties and colorimetric data of synthesized dyes have also been studied in detail.     

One-Bath Union Dyeing of Wool/Acrylic Blend Fabric with Cationic Reactive Dyes Based on Azobenzene

Three unreported cationic reactive dyes based on azobenzene were synthesized using a novel synthetic route. Synthesized dyestuffs containing three primary color dyes were characterized by FTIR, H-NMR, LC-MS, Element Analysis and UV-vis spectroscopic techniques. The absorption spectra of dyes were measured in three solvents with different polarities. The dyeing and color fastness properties of three cationic reactive dyes on wool, acrylic and wool/acrylic blend fabrics were determined. The optimum pH for wool and acrylic fabrics were 6 and 5, respectively. Effect of temperature, time on dyeing properties and color fastness properties on wool fabric showed the same tendency with acrylic fabric. The K/S value of wool fabric dyed with three dyes was similar to that of acrylic fabric when both fabrics were dyed simultaneously in the same dyebath using low dye concentration. Wool/acrylic blend fabric dyed with three cationic reactive dyes using onebath one-step method achieved good union dyeing property and excellent color fastness.