Antioxidant phytochemicals and gingerol content in diploid and tetraploid clones of ginger (Zingiber officinale Roscoe)

Fresh rhizomes of 18 diploid and tetraploid genotypes of Indian ginger, including commercial cultivars and experimental genotypes, were assayed for gingerol content and antioxidant activity. The tetraploid ginger type was derived from the respective diploid ginger by shoot tip culture. [6]-Gingerol was identified as the major pungent phenolic compound in all samples (mean 1354.78 ± 470 μg/g), while [8]- (mean 180.94 ± 45 μg/g) and [10]-gingerol (mean 234 ± 79 μg/g) occurred in lower concentrations. The total gingerol content of the tetraploid type was much higher than that of the respective diploid type and especially the [10]-gingerol. Both diploid and tetraploid types of the cv. Meghalaya Local contained the highest level of gingerol. At both ploidy levels, the genotypes showed significant differences in phenols and antioxidant activities. Correlation of total phenolics with different antioxidant assay at both diploid and tetraploid level was linear and strong to moderate. For genotypes at both ploidy levels, antioxidant activity (BCO) was determined especially by [6]-gingerol while [8]- and [10]-gingerol did not affect BCO. These results demonstrated that in the tetraploid types of ginger, the gingerol content and antioxidant activity were higher than in the diploid ones.     

Modeling individual leaf area of ginger (Zingiber officinale Roscoe) using leaf length and width

Leaf area estimation is an important biometrical observation one has to do for comparing plant growth in field and pot experiments. In this study, a leaf area estimation model was developed for ginger (Zingiber officinale Roscoe), using linear measurements of leaf length (L) and maximum width (W). Leaves from five ginger varieties (Varada, Rejatha, Mahima, Maran and Himachal) were used to develop the model in 2006–2007. The actual leaf area (LA) was measured with a leaf area meter (LI-3100, LI-COR, Lincoln, NE, USA) and taken as reference LA. The linear measurements were used to build linear (LA = a + b × L × W) and power models (LA = α × (L × W)^β) for each variety, as the modeling among variety were not different from each other, data for all five varieties have been pooled and compared with earlier models by graphical procedures and statistical criteria such as Mean Square Error (MSE), Root Mean Square Error (RMSE) and Chi-square (χ²). The selected model was validated during 2007–2008. The validation data set was used to produce a validation model for each variety by re-estimating the model parameters to develop the estimation model and the models were compared for consistency. The predicted LA (PLA) was compared with observed LA (OLA) by graphical procedures and lack of agreement was evaluated by calculating the relative bias, estimated by the mean of differences (d) and the standard deviation (SD) of the differences. Normality test was carried out by Spearman's rank correlation coefficient (r_s) and residuals were normally distributed. Finally, the proposed model for leaf area estimation of ginger is LA = −0.0146 + 0.6621 × L × W, R² = 0.997. This model can be reliably used for estimating leaf area of ginger non-destructively. The same equation can be extrapolated to all varieties and land races of ginger as it is vegetatively propagated crop with narrow genetic variability.     

Study of some factors affecting the growth and development of myoga (Zingiber mioga Roscoe)

In order to optimise production of the edible flower buds produced by myoga (Zingiber mioga Roscoe) a greater understanding of the growth and development of the plant and factors influencing flower initiation and development are required. The vegetative growth phase in myoga was characterised by a distinct period of pseudostem development from the planted rhizome piece followed by an extended period of rhizome growth from both the base of pseudostems and the planted rhizome piece. The transition from pseudostem formation to the initiation of rhizome growth occurred at the same time as the dry weight of the planted rhizome piece ceased to decline. Flower bud initiation and development occurred over an extended period, beginning soon after the commencement of new rhizome growth and ending prior to foliage senescence. Flower buds were observed at the terminal meristem of first, second, third and fourth order rhizomes. Increasing temperatures stimulated both increased vegetative growth and flower bud initiation and development. Low flower bud yields recorded under conditions of low temperature were the result of reduced rate of floral initiation and not abortion of flower buds. Increased shading of plants grown under glasshouse conditions resulted in reduced flower bud yield and similarly the response resulted from decreased initiation rather than abortion.     

The effects of temperature on in vitro pollen germination and pollen tube growth of Pistacia spp.

The pollen germination and pollen tube growth among nine Pistacia genotypes was quantified in order to identify differences in the tolerance of pollen to temperature variations. The effect of temperature on in vitro pollen germination and pollen tube growth was investigated in Pistacia vera (Uygur, Atli, Kaska, Sengel, Kavak), P. atlantica, P. khinjuk, P. terebinthus and P. palaestina. When pollen was incubated in a germination medium for 24 h in darkness, distinct differences were observed in pollen germination and pollen tube growth at different temperatures.     

精胺对梨花粉原位萌发及花粉管生长的影响

为进一步研究活体条件下精胺对梨花粉萌发及花粉管生长的影响,以幸水、新雪、长-二十世纪为材料,采用荧光显微镜观测了不同浓度精胺处理的花粉萌发及花粉管生长情况。试验结果表明:较低浓度的精胺能促进花粉萌发,而超过一定浓度时则表现抑制作用,适宜于花粉萌发的精胺浓度是0-0.025mmol/L。精胺对花粉管生长的促进作用因品种而异,0-0.05mmol/L,精胺促进幸水、新雪花粉管生长的作用主要表现在花柱中上部;而到达基部的花粉管仍较少,与对照间差异不显著。在0-0.025mmol/L的适宜浓度下,精胺可促进长-二十世纪花粉管生长并到达花柱基部。不同浓度的精胺对幸水、新雪坐果影响不大;而适宜浓度的精胺可促进长-二十世纪坐果。     

Germination and growth of sponge gourd (Luffa cylindrica) pollen tubes and FTIR analysis of the pollen tube wall

Emergence of multiple pollen tubes from single pollen grains occurred both in vitro and in vivo in sponge gourd (Luffa cylindrica (L.) Roem). The frequency with which pollen grains produced multiple pollen tubes in vivo (7.2%) was lower than that under in vitro conditions (14.9%). In pollen grains germinated in vitro, the total length of the multiple pollen tubes was greater than that of single pollen tubes, but individual tubes among the multiple tubes did not reach the same length as single tubes. Moreover, the growth of the single pollen tubes continued for a longer period in vitro than that of the multiple tubes. Fluorescence microscopy showed that callose was present throughout the pollen tube wall except in the apical part of growing pollen tubes, and nuclei moved into the longest of the multiple tubes. Results of Fourier transform infrared microspectroscopy indicated that abnormal cell wall components (peaks at 800–1000 cm⁻¹) were more frequent in multiple pollen tubes lacking nuclei, and the pectin content (1733 cm⁻¹) in multiple pollen tubes was much lower than that in single pollen tubes. These findings suggested that there were significant differences in pollen tube growth and wall composition between single and multiple pollen tubes, and that multiple pollen tubes had much less opportunity than single pollen tubes to reach the embryo sac and achieve double fertilization.     

Effects of post-harvest foliar boron and calcium applications on subsequent season's pollen germination and pollen tube growth of pear (Pyrus pyrifolia)

The primary objective of this study was to evaluate the effects of foliar boron and calcium application after harvest on the quantity and activity of pollen in the ‘Housui’ and ‘Wonwhang’ pears on a subsequent year. Pollen grains of the ‘Housui’ pear were cultured on germination medium, to which had been added boric acid (0, 25, 75, 100, 200, 300, 400, and 500 mg L⁻¹) and calcium nitrate (0, 10, 25, 50, 100, 150, 200, 250, 300, 400, and 500 mg L⁻¹). Boric acid, which was added to the germination media, exerted a significant stimulatory effect on both pollen germination and pollen tube growth, although pollen tube growth was inhibited at higher concentrations than 300 mg L⁻¹. Calcium nitrate addition stimulated pollen germination, except at concentration of 500 mg L⁻¹. However, pollen tube growth was significantly inhibited with increasing concentrations of calcium nitrate. In the orchard experiment, boron and calcium were sprayed at concentrations of 0, 100, 200, 500 or 1000 mg L⁻¹ onto leaves after harvest, respectively. Boron and calcium content in the tissues as well as pollen production and growth were determined after these treatments. The foliar application of boron mainly resulted in an increase of boron concentration in buds. It also induced an increase in the weight of the anther and pollen in the following year. On the other hand, the foliar application of calcium resulted in an increase of calcium concentration mainly in the leaves, but pollen weight was decreased at high concentration treatment in the following year. The germination rate and tube growth of collected pollen were highest in the trees which had received boron treatment at a concentration of 200 mg L⁻¹. In contrast, the germination rate and tube growth of collected pollen were decreased by calcium application at concentrations of 500 and 1000 mg L⁻¹ without significant increase at lower concentrations. Consequently, the accumulation of boron in the developed buds of pear trees subjected to post-harvest foliar boron application generated positive effects on both the quantity and quality of pollen in the following year.     

不同发育阶段甜樱桃花授粉后花粉萌发和花粉管生长的差异

选用自交不亲和性程度不同的2个甜樱桃品种莫利和拉宾斯为试材,分别在开花前、开花当天和开花后进行莫利自花、拉宾斯自花和莫利×拉宾斯异花授粉,并于授粉后12、24、48、72、96h切取花柱,用FAA固定,荧光染色后压片观察。结果表明,3个组合的花粉萌发率都以开花当天授粉的最佳,拉宾斯自交和莫利×拉宾斯的花粉管生长状况也以开花当天授粉的最佳,但莫利自交的花粉管生长状况却以花前第4天最佳,花后第4天次之,而当天授粉的最差。因此认为,甜樱桃自交不亲和程度与其雌蕊的发育状态密切相关,蕾期授粉和延迟授粉都能够在一定程度上克服甜樱桃的自交不亲和性,但蕾期授粉的作用更加明显。     

Encapsulation for in vitro short-term storage and exchange of ginger (Zingiber officinale Rosc.) germplasm

Synseeds of ginger (Zingiber officinale) were produced using aseptically proliferated 2-week old encapsulating explants (microshoots) upon complexation of 4% sodium alginate prepared in Murashige and Skoog (1962) medium (MS) and 100 mM calcium chloride. Conversion of synseeds into plantlets (conversion) was recorded as 66% and 53% on MS (3% sucrose) and on MS (3% sucrose) + 2.5 mg/l BA media, respectively. However, shoots/synseed were significantly higher on MS (3% sucrose) + 2.5 mg/l BA medium. For short-term storage of germplasm, sucrose-dehydrated synseeds were found better than air-dehydrated or fresh synseeds. Synseeds dehydrated in 0.25 M sucrose liquid medium for 16 h and stored in cryovials (with out medium) at 25 °C for 8 weeks and 12 weeks exhibited 53% and 13% conversion, respectively, on MS (3% sucrose) + 2.5 mg/l BA medium. Plantlets obtained from stored synseeds were hardened, established successfully ex vitro and were morphologically similar to each other as well as their mother plants. This synseed protocol could be useful for short-term storage and exchange of germplasm of ginger between national as well as international laboratories.     

Ameliorative effect of polyamines on the high temperature inhibition of in vitro pollen germination in tomato (Lycopersicon esculentum Mill.)

Effect of polyamines on in vitro pollen germination at high temperatures in tomato (Lycopersicon esculentum Mill.) was investigated. Pollen germination and tube growth were significantly inhibited at 33°C and 35°C compared to those at 25°C. This inhibition was reversed by the addition of spermidine or spermine in the germination medium. Spermidine at 0.5 mM was slightly more effective than spermine at 0.05 mM. Spermidine at 0.05 and 0.5 mM and spermine at 0.05 mM slightly increased pollen germination rates at 25°C. Spermidine at 5 mM and spermine at 0.5 M were inhibitory to pollen germination, regardless of incubation temperatures. Spermidine also promoted germination of pollen grains incubated at 38°C for 1 and 3 h and then at 25°C for the rest of the 20 h incubation period. The effect was higher at 0.5 mM than at 0.05 mM. Treatment of spermidine to intact flowers 1 day before anthesis was also effective in ameliorating the high temperature inhibition of in vitro pollen germination on the polyamine-free medium. Here, the optimum concentration was 5 mM. These results demonstrate that polyamines can counteract the inhibitory effects of high temperature on pollen germination. They also suggest that the endogenous level of polyamines in germinating pollen grains is an important factor for the pollen germinability at high temperature.     

Low temperature storage and in vitro germination of cherimoya (Annona cherimola Mill.) pollen

Due to the protogynous dichogamy of cherimoya and to the absence of proper pollinating vectors, hand-pollination with fresh pollen is a common practice for cherimoya commercial production. In order to optimize the process of hand-pollination, in this work we have studied the conservation of cherimoya pollen at −20, −80 and −196 °C for up to 3 months. In vitro pollen germination of fresh pollen was 57.1% and it was progressively reduced with conservation time at the three temperatures studied reaching a minimum after 3 months of storage of 10.4%, 14.2% and 13.6% at −20, −80 and −196 °C, respectively. Differences in germination among temperatures were only significant during the first 2 weeks of storage. Field pollinations with pollen stored for up to 3 months at the three temperatures show no yield differences compared to pollinations performed with fresh pollen. The results indicate that pollen collected and stored at sub-zero temperatures at the beginning of the cherimoya blooming season can be used along the whole blooming season avoiding the need of collecting fresh pollen daily.     

Influence of pollination methods on fruit development and sugar contents of oriental melon (Cucumis melo L. cv. Sagyejeol-Ggul)

This study was conducted at the Seongju Fruit Vegetable Experiment Station for 2 years, 2002–2003 to investigate the effect of pollination methods on development and sugar content of oriental melon fruits. Oriental melon fruit was pollinated by honeybees (Apis indica) and bumblebees (Bombus ignitus) and fruit setting growth regulators was used as a control treatment. Fruits pollinated by honeybees and bumblebees has lesser length and width of fruit compared to the control. Pollinated by bumblebees increased hardness and soluble solids of fruits by 27% and 4–5% and that of honeybees increased hardness and soluble solids of fruits by 12% and 5–10% compared to the control, respectively. Fermented fruit ratio (%) of oriental melon fruit pollinated by honeybees, bumblebees, and growth regulator was 6.7%, 9.1%, and 28.1%, respectively. Glucose, fructose and sucrose contents of fruits by HPLC (high performance liquid chromatography) were very low throughout the ripening stage, but abruptly increased at harvesting stage. In fructose content of fruits, pollination of bumblebees and honeybees was higher by 9% and by 13% than those of control, respectively. The amount of total sugar content in fully ripen fruits of oriental melon was not different between the treatments (P > 0.05). Total sugar content (%) of fruits pollinated by bumblebees was slowly decreased until 15 days after storage compared to that of other treatment. For the low fermented fruit ratio (%) and slowly reduced total sugar content at storage of fruits, the pollination of bees was more useful than fruit setting growth regulators in early cultivation of oriental melon under plastic houses. The economic analysis according to the pollination method will be needed in the near future.     

Variation in DPPH scavenging activity and major volatile oil components of cassumunar ginger, Zingiber montanum (Koenig), in response to water deficit and light intensity

Cassumunar ginger, Zingiber montanum (Koenig) Link ex Dietr. (Zingiberaceae), is called Phlai in Thailand. The current study investigates the levels of antioxidant activity and major volatile oil components in cassumunar ginger exposed to varying water deficits (0, 30, 60, 90 and 120 days before harvest) and light intensities (100%, 50% and 25% sunlight). A 120-day water deficit resulted in high volatile oil content and increased sabinene content, but DPPH scavenging activity was not affected. The quantity of volatile oil in the cassumunar ginger exposed to a 120-day water deficit was almost twice that of both the control and the sample exposed to a 30-day deficit. The highest terpinen-4-ol content was obtained after a 60-day water deficit, and (E)-1-(3′,4′-dimethoxyphenyl) butadiene content tended to decrease with prolonged water deficiency. The antioxidant activities of cassumunar ginger were 52.98%, 41.75% and 42.93% in plants grown at 100%, 50%, and 25% sunlight, respectively. Light intensity of 50% or 25% increased the biomass of cassumunar ginger but decreased the volatile oil content; antioxidant activity was not significantly affected.     

Effects of cadmium and copper on pollen germination and fruit set in pea (Pisum sativum L.)

In this work, pea (Pisum sativum) plants exposed to increasing cadmium and copper concentrations were tested for heavy metals accumulation in flowers and for ‘in vivo’ pollen germination. Based on the Cd and Cu accumulation amounts in the flowers, an evaluation of the same metals effects on ‘in vitro’ pollen germination was achieved. Moreover, the effects of both metals on fruits number and weight and on seed set and yield at individual plant level were examined. While cadmium concentrations did not affect ‘in vivo’ pollen germination, only higher copper concentrations rendered a significant reduction. This is in contrast with the clear negative effect on pollen germination in vitro and might be explained by the different dynamic and bioavailability of both metals. A clear effect of Cd and Cu was observed on two important yield components ie, fruit weight and seed set. Although results obtained herein cannot give a clear cut relationship between the effect of Ca and Cu on reproductive development and its consequences on yields, they represent emerging results on the potential consequences of metals contamination on reproductive development in plants.     

Root zone temperature,plant growth and yield of broccoli [Brassica oleracea (Plenck) var. italica] as affected by plastic film mulches

Plastic film mulches are often associated with increases in plant growth and yield of vegetable crops. Few studies, however, report on the effect of plastic film mulches on root zone temperature on broccoli. The objectives of this study were to determine the effects of colored plastic mulches on root zone temperature and broccoli plant growth and yield Broccoli (‘Packman’) plants were grown using plastic film mulch and drip irrigation. The treatments consisted of plastic film mulch (black, blue, gray on black, red, silver on black, and white on black mulches) and bare soil. Colored plastic film mulches affected root zone temperature and the accumulation of soil degree-days. Mean daily RZT, maximal daily RZT and degree day accumulation in the soil were highest in dark-colored mulches (blue, black, red, and gray) and lowest in light-colored mulches (silver and white), while minimal daily RZT was highest in silver mulch and lowest in white mulch. Silver mulch showed the smallest diurnal fluctuations in RZT among plastic mulches, with the highest RZT during the night and among the lowest in the afternoon. Colored plastic mulches also affected broccoli plant growth and yield, although the effect of mulches was more dramatic in the spring than in the fall seasons. Broccoli yield was linearly related to both the vegetative top dry weight and root dry weight of mature plants. Broccoli yield was little affected at mean RZT of <21 °C but increased with increasing mean RZTs above 21 °C up to 25 °C. Thus, broccoli plant growth and yield responded more favorably to dark-colored mulches than to light-colored mulches, suggesting that broccoli benefited from increased soil warming. No high RZT stress effects on broccoli plant growth or yield were observed in this study. Thus, this study suggests that plastic film mulches, particularly the dark-colored mulches, may be an option for spring broccoli production in areas with cool conditions early in the spring.     

Phenological,morphological and functional indicators of genetic variability and their implication in the sexual reproductive system of Olea europaea L. (Oleaceae)

The floral biology of ‘Koroneiki’, ‘Kalamata’ and ‘Mastoidis’ was studied for three consecutive years to elucidate the potential physiological and genetic controls of inflorescence architecture and phenology and to identify potential genotype-distinguishing characters that could be employed for morphological cultivar discrimination. The first open flowers were mainly observed at position I for ‘Koroneiki’ (83%) while they were mainly located at position II for ‘Mastoidis’ (40%) and ‘Kalamata’ (63%). The last open flowers were principally located at the apical position for ‘Koroneiki’ (46%) and ‘Kalamata’ (68%) and at position II for ‘Mastoidis’ (75%). Most of the first open flowers were perfect for ‘Koroneiki’ (89%) and ‘Mastoidis’ (97%) while lower percentages were observed in the last open flowers (67% and 80%, respectively). Higher percentages of perfect flowers were observed in ‘Mastoidis’ compared to ‘Koroneiki’ in both cases. The average flowering shoots of ‘Kalamata’ produced significantly more flowers (1523/m) compared to ‘Koroneiki’ (1139/m) and ‘Mastoidis’ (1044/m). The half of the flowers in ‘Mastoidis’ were located at position I while the 38% was located at position II and only the 12% at the apex. By contrast, approximately the 80% of flowers in ‘Koroneiki’ and ‘Kalamata’ panicles was equally distributed at positions I and II, while the 18% and 19%, respectively, was located at the apex. A marked relationship was also observed between flower position in the panicle and flower gender.     

Yield and fruit quality of ‘Nova’ hybrid [Citrus clementina hort. ex Tanaka × (C. reticulata Blanco × C. paradisi Macfad)] and two Clementine varieties (C. clementina hort. ex Tanaka) as affected by self- and cross-pollination

Low yields of ‘Nova’ citrus hybrid are common in single variety plantings (plantings consisting of one variety) due to its sexual self-incompatibility. Self-incompatibility may be overcome by cross-pollination with other compatible varieties. Fruit quality and yield of ‘Nova’ citrus hybrid as well as of the ‘SRA63’ and ‘Marisol’ Clementines, when either they were self-pollinated in single variety plantings or each one of the two Clementine varieties was used as a pollenizer for ‘Nova’ in mixed plantings (plantings consisting of more than one variety), were investigated. The study was carried out for two successive years under the same environmental and cultural conditions using three single variety plantings (‘Nova’ × ‘Nova’, ‘SRA63’ × ‘SRA63’, ‘Marisol’ × ‘Marisol’) and two mixed plantings (‘Nova’ × ‘SRA63’, ‘Nova’ × ‘Marisol’).     

Clonal propagation of mulberry (Morus indica L. cultivar M-5) through in vitro culture of nodal explants

A high frequency of sprouting (80.0%) and shoot differentiation was observed in the primary cultures of nodal explants of Morus indica L. cultivar M-5 on MS medium supplemented with 2,4-D (0.3 mg/l). In vitro proliferated shoots were multiplied rapidly by culture of shoot tips on MS medium with BAP (0.5 and 1.0 mg/l) which produced the greatest multiple shoot formation. Multiplication was also achieved by culture of shoot tips on MS medium with BAP (4.0 mg/l) and GA₃ (0.05 mg/l) which facilitated the elongation of shoots followed by sprouting of axillary buds of in vitro grown shoots. A high frequency of rooting (86.7%) with development of healthy roots was observed from shoots cultured on medium with 2,4-D (1.0 mg/l). Plants with well developed roots were transferred to soil with a survival frequency of 80%.     

Effects of explant type, culture media and growth regulators on callus induction and plant regeneration of Chinese jiaotou (Allium chinense)

To establish an efficient protocol of shoot regeneration from callus, effects of explant type, culture media and plant growth regulators on callus induction and shoot regeneration of Chinese jiaotou (Allium chinense) were evaluated. The results showed that basal plate was the best explant for callus induction (47.5%) when cultured on B5 medium supplemented with 0.1 mg l⁻¹ 6-benzylaminopurine (BA) and 1.0 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D), and B5 was the best medium to induce callus formation with 49.3% of the explants forming callus. The highest callus induction (65.2%) was achieved culturing basal plate on B5 medium supplemented with 0.1 mg l⁻¹ BA and 1.0 mg l⁻¹ 2,4-D after 8 weeks of culture. The best callus proliferation was observed on B5 medium with 1.5 mg l⁻¹ 2,4-D. Shoots regenerated at the highest frequency of 58.8% with 4.5 shoots when calli were cultured on B5 medium with 0.1 mg l⁻¹ BA and 1.0 mg l⁻¹ a-naphthaleneacetic acid (NAA). This protocol provides a basis for future studies on genetic improvement and could be applied to large-scale multiplication systems for commercial nurseries of Allium chinense.     

Predicting canopy and trunk cross-sectional area of silver linden (Tilia tomentosa) in confined planting cutouts

Urbanized land is characterized by the dominance of paved surfaces. Increasing tree canopy in urbanized areas has been identified as an effective way to reduce stormwater runoff, sequester carbon, improve air and water quality, and otherwise mitigate the environmental impacts and increase the livability of cities. However, attaining sufficient tree canopy in urban areas remains an elusive goal. Site design characteristics such as cutout size may limit urban tree growth and complicate efforts to predict future canopy, especially in highly paved systems such as parking lots. We studied 25 silver lindens (Tilia tomentosa Moench) grown for 14 years at one site, in pavement cutouts of various sizes. Regression analysis, even on these limited data, indicated a strong relationship between tree size and canopy projection area and unpaved soil surface area, but not soil depth. Cutout size explained 70% of the variability in tree canopy projection area and 77% of the variability in trunk cross-sectional area. The addition of other variables, such as soil bulk density, did not improve the model. Trees growing in parking lot cutouts <5.3 m² attained only limited size, regardless of the level of soil compaction. In larger cutouts, however, increases in soil bulk density from 1.1 to 1.5 Mg/m³ were associated with a 70% reduction in trunk cross-sectional area. In order to create urban sites with a sustainable tree canopy, site design must provide large areas of uncompacted soil for trees and protect this soil from compaction during use. Urban tree growth models that incorporate cutout characteristics are needed to predict future canopy area with confidence.