A model describing axial flow of liquids through conifer wood

Summary A mathematical model has been derived for the prediction of the resistance to viscous liquid flow generated by tracheid lumina and various parts of the bordered pit structure. The model also takes into account changes in pit geometry occurring as the pit membrane deflects when a pressure differential is applied across it. Methods for checking whether flow is truly viscous are presented.Data calculated for Pinus sylvestris suggest that the permeability of earlywood differs markedly from that of latewood; that in latewood the pit apertures contribute significantly to the total resistance to flow; and that kinetic energy corrections to the Poiseuille viscous flow equation may be of some importance at high flow rates.The authors wish to acknowledge the encouragement of Professors Matthews and Roche.     

The effects of drying on the structure and permeability of the wood of Abies grandis

Summary The effects of air-drying and solvent-drying on the sapwood of Abies grandis have been investigated by a new method for the determination of the size and number of conducting tracheid lumina and pit membrane pores which involves the measurement of gaseous permeability at various mean pressures. Both earlywood and latewood tracheids (83% of the total) were found to be conducting in solvent-dried wood, but in air-dried wood only latewood tracheids (32% of the total) were conducting. In solvent-dried wood there were on average 27,000 pit membrane pores per conducting tracheid compared with only 600 in air-dried wood. In both, the average pit membrane pore radius was about 0.1 m.Liquid permeabilities have been predicted from the calculated radii and numbers. The liquid permeability of solvent-dried wood was 31 times greater than that of air-dried wood in which the lumina were responsible for 13% of the total resistance to flow. The lumina were responsible for 39% of the resistance in solvent-dried wood and it is suggested that in first-formed earlywood the lumina may cause more than half the total resistance.A new method is described for the cleaning of direct carbon replicas of wood. In this the cellulose is removed by cellulase instead of sulphuric acid, and no wax backing is required. This provides much cleaner replicas. Electron micrographs have been obtained of both earlywood and latewood dried by the two methods.The authors wish to thank Mr. A. R. Sayers for preparing the computer programme used in this work, Dr. R. Ph. C. Johnson for his help and advice regarding the electron microscopy and Professors Matthews and Weatherley for their advice and encouragement.     

End correction for gaseous diffusion through short capillaries in wood

Summary It is shown that to calculate the rate of gaseous diffusion through an isolated capillary of radius a an end correction of a/2 must be added to the physical length of the capillary. This correction is applicable to diffusion through pit apertures in conifer wood. Mutual interference between diffusion through closely spaced capillaries reduces the end correction. Two approaches to the calculation of this effect are discussed. The pores in many bordered pit membranes are so closely spaced that the end correction becomes negligible. It is shown theoretically that when the end correction is taken into account the tracheid lumen/cell wall pathway provides the path of least resistance for transverse moisture diffusion through conifer wood.     

Tangential pitting in black spruce tracheids

Tangential pit features were studied in a 55-year old black spruce (Picea mariana (Mill) B.S.P.) tree by means of light and electron microscopy.It was found that tangential pitting is lacking from the greatest part of the growth ring, except for the last four tangential rows of latewood tracheids and the first row of early wood tracheids. The average number of pits per tangential wall of a 3.55-mm-long tracheid is 234, 144, 28, 4 and zero, respectively, in the last 5 tangential rows of latewood tracheids, starting at the growth-ring boundary.On the average, tangential pits measure 5.4 m in diameter, possess oval to elliptical apertures, and are randomly distributed uniformly over the tangential tracheid wall. All tangential intertracheid pits are bordered and in that respect are similar to those in the radial walls. Although most of the pits contain membranes with tori, some at the growth-ring boundary lack tori and exhibit randomly oriented microfibrillar structure.     

Ultrastructure of pits inPinus banksiana lamb

Summary The cross-sectional view of pitting between various cell types inPinus banksiana Lamb. was studied at the ultrastructural level. Cell types inPinus banksiana include longitudinal tracheids, ray tracheids, ray parenchyma cells, buffer cells and epithelial cells. Two common characteristic features of bordered pit-pairs between longitudinal tracheids are an initial pit border and a thickened torus at the center of the pit membrane. The shape and size of the pit border and torus of bordered pit-pairs between two compression wood cells, and between the last-formed latewood longitudinal tracheid and first-formed earlywood longitudinal tracheid were different from those in the earlywood and latewood longitudinal tracheids. The pit border on the ray tracheid side varied in size and shape due to wall dentation. No initial pit border was found on the pit border of the ray tracheid side. The shape of bordered pit-pairs between two ray tracheids varied considerably due to irregularity of the dentate cell wall. The size of bordered pit-pairs in longitudinal tracheids was between 16 m to 20 m, which was twice the diameter of bordered pit-pairs in ray tracheids. Bordered pitpairs at the end wall of two ray tracheids appeared to be the smallest at 5 m, Pit aspiration occurred in the bordered pit-pairs with or without a torus. In the heartwood zone, some half-borders pit-pairs between tracheary and ray parenchyma cells showed an additional secondary wall on the ray parenchyma cell side. Plasmodesmata were found in the half-bordered pit-pairs as well in the simple pit-pairs. Blind pits were observed between a ray tracheid and a longitudinal tracheid. Bordered pit-pairs between two buffer cells were also observed. The possible functions of buffer cells were discussed.Use of transmission electron microscope provided by the Science Instrumentation Lab, Lakehead University and the technical assistance provided by Mr. A. MacKenzie, Director of Science Instrumentation Lab are gratefully appreciated     

A comparison of latewood pits,fibril orientation,and shrinkage of normal and compression wood of giant sequoia

Summary Giant sequoia latewood compression wood (CW) tracheids had pit canals that flared toward the lumen with extended poorly defined inner apertures that paralleled the fibrils in the S2 walls. Boiling and drying of CW and normal wood (NW) blocks induced split extensions at the CW pit aperture grooves but not at the NW pit apertures. These split extensions of the CW pit apertures were present also in longitudinal microsections. The mean fibril angle of 21 to 25 degrees of this well-defined CW was appreciably below the 45 degrees frequently reported. The CW tangential/radial shrinkage ratio of about 1 was distinetly lower than NW (1.6 and 2.1), and appeared to be the result of much lower tangential shrinkage. Both NW and CW specimens when dried quickly in an oven at 100° C had higher shrinkage (long., tang. and rad.) than when air-dried first at lower temperature and higher relative humidity.The SEM photographs were made in the Electronics Research Laboratory which is under the direction of Dr. T. E. Everhart who has a Cambridge Stereoscan Mark II SEM operated under NIH Grant No. G. M. 17523.     

人工兴安落叶松次生木质部的解剖学研究

运用木材解剖图像分析系统和显微照相的方法对人工兴安落叶松次生木质部的解剖结构进行研究,结果表明:落叶松具正常树脂道和受伤树脂道两种类型,前者常见于晚材。落叶松生长轮内的早晚材在干和枝内急变,在根内缓变。早材管胞呈六边形至多边形,胞壁常见单列具缘纹孔,偶见对列具缘纹孔;晚材管胞多呈矩形,胞壁鲜见具缘纹孔,通常为单列具缘纹孔。落叶松木射线同时具有单列木射线和纺锤形木射线两种类型,纺锤形木射线中仅含一枚纵行树脂道。纵行管胞与木射线交叉形成的纹孔场为云杉型。从根到干再到枝,管胞逐渐细化,管胞长度逐渐减小,木射线分布由密到疏。     

Hydraulic and anatomical properties of light bands in Norway spruce compression wood

Compression wood (CW), which is formed on the underside of conifer branches, exhibits a lower specific hydraulic conductivity (k(s)) compared with normal wood. However, the first-formed tracheids of an annual ring on the underside of a conifer branch often share several properties with normal tracheids, e.g., thin cell walls and angular cross sections. These first-formed tracheids appear bright when observed by the naked eye and are therefore called light bands (LB). In this study, hydraulic and related anatomical properties of LBs were characterized and compared with typical CW and opposite wood (OW). Measurements were made on branches of Norway spruce (Picea abies (L.) Karst.). Specific hydraulic conductivity was measured with fine cannulas connected to microlitre syringes. Micro- and ultrastructural analysis were performed on transverse and radial longitudinal sections by light and scanning electron microscopy. Xylem areas containing both typical CW and LBs had a k(s) 51.5% that of OW (7.95 +/- 0.97 m(2) s(-1) MPa(-1) x 10(-4)), whereas k(s) of pure CW was only 26.7% that of OW. The k(s) of LBs (6.38 +/- 0.97 m(2) s(-1) MPa(-1) x 10(-4); 80.3% of OW) was estimated from these k(s) values because the cannulas were too wide to measure the k(s) of LBs directly. Mean lumen area of first-formed tracheids on the underside of branches was 65.7% that of first-formed tracheids in OW and about three times that of CW. Light-band tracheids exhibited a bordered pit frequency of 42.7 +/- 1.3 pits mm(-1), which was three times that in CW and 1.6 times that in OW. Bordered pit apertures in LB tracheids (9.15 +/- 0.60 microm(2)) were 1.7 times wider than those in CW and similar in aperture to those in OW. The high k(s) of LBs was correlated with their wide tracheid lumina, high pit frequency and wide pit apertures. We therefore suggest that LBs have a primarily hydraulic function within the mechanically optimized CW region. This might be important for supplying water to living tissues on the underside of branches, as well as to other distal areas along water transport pathways following the spiral grain of wood.     

Electron microscopic study on the development of the bordered pit in coniferous tracheids

Summary The observations of the inner surface of Japanese red pine (Pinus densiflora Sieb. et Zucc.) earlywood tracheid wall in the various stages of the differentiation allowed the study of the development of the bordered pit. The process of the formation of the bordered pit membrane and the deposition of the cell wall layers in the pit border region were examined in detail by electron microscopy using the replication preparation technique. The microfibrillar structure of the margo and torus, which is characteristic of the bordered pit membrane of this species, was detected in the later stage of primary wall formation. The bordered pit membrane was shown to have the same microfibrillar structure as that of the matured one even at this stage of differentiation, although it was embedded in matrix substances. It appeared that the matrix substances were removed immediately after the warty layer had been formed in the tracheid wall.The initiation of pit border development was observed as the deposition of circularly oriented microfibrils around the vicinity of the pit annulus in the later stage of the primary wall formation. The deposition of the S₁-layer was indicated to contribute to the pit border formation until the diameter of the pit aperture reached its final size, simultaneously with the apposition of the layer of so-called B. T. or initial border thickening. So both the S₁-layer and initial border thickening were assumed to be formed supplementing each other. In the period of the S₁-layer formation, the transversely deposited microfibrils in the tracheid inner surface were detected to generally curve around the pit aperture and some of them extend to the outer surface of the developing pit border beyond the pit aperture. From these observations of replicas of the inner surface of the differentiating tracheid, a concept concerning pit border formation is proposed.The authors are indebted to members in Kyoto University Forest for providing the samples and to Dr. H. Saiki and other members of Wood Structure Laboratory in Department of Wood Science and Technology at Kyoto University for their assistance during this study. They also express their appreciation to Dr. W. A. Cote, Jr. (State University, College of Forestry, N. Y.) and Dr. W. Liese (Universität Hamburg) for their considerate advice.     

Classification of the conductance of moisture through wood cell components

This study aimed to clarify the conductance of moisture through wood cell components. Moisture diffusion coefficients were determined from three models (Stamm, Siau, and Kang et al.) and cell wall, pit, and ray dimensions were experimentally observed in a wood specimen. Fractions of moisture diffusing along each path in each of the models were analyzed. As moisture content decreased, the fraction of water diffusing as bound water through cell walls in tangential and longitudinal directions decreased while water vapor diffusion through lumens and pits became more dominant. Diffusion coefficients predicted by each model were compared with experimental values. Although predicted values differed from experimental values, predicted trends for diffusion rate dependence on moisture content were similar to the experimental results. In particular, the models of Stamm and Kang et al., which consider moisture transport through rays and pits, show a very consistent trend for transverse diffusion, which is always faster radially than tangentially. Input of more accurate dimensions of cell walls and cavities into the models should result in more reliable values, closer to the experimentally determined diffusion coefficients.     

杉木管胞具缘纹孔膜超微构造

轴向管胞是针叶材中的主要细胞,它的体积约占木材体积的90%以上,其主要功能是输导水分及强固树体(申宗圻,1984).     

Diffusion of chemicals into archaeological waterlogged hardwoods obtained from the Thang Long Imperial Citadel site,Vietnam

This study shows a method to easily develop suitable impregnation procedure of chemicals for preserving the archaeological waterlogged wood (WW) using diffusion constant. The steady-state diffusion coefficients of polyethylene glycol 4000 (PEG4000), trehalose, and keratin through eight archaeological waterlogged wood species were obtained from the total amounts of the chemicals diffused through the wood samples. The diffusion coefficients were strongly affected by the anatomical structures of the wood species and degree of wood deterioration. Within the same species of wood, the highest diffusion rates were measured in the longitudinal direction, followed by those in the radial and tangential directions. The longitudinal diffusion coefficients were 1.5- to 8.1-times higher than the radial diffusion coefficients, which were in turn approximately 1.1- to 5.7-times higher than the tangential diffusion coefficients. The diffusion rates were found to be inversely proportional to the molecular weight of the diffusing chemical. The diffusivity of trehalose through the waterlogged woods was found to be higher than those of keratin and PEG4000. This study provides a potential method to easily estimate chemical diffusion coefficients for dip-diffusion treatments.     

木材导热系数的研究

本文运用非平衡态热力学线性理论分析了含水率在纤维饱和点以下木材的传热,结果表明木材中的水蒸汽和束缚水参与了传热,木材导热系数由传导导热系数与因水蒸汽和束缚水扩散产生的两个等效导热系数组成。推广Siau关于木材细胞的导热理论,依据水分吸附和扩散的原理,导出了木材弦向和径向导热系数计算公式,与已发表的36种气干材弦向实验值和23种气干材径向实验值符合较好。分析木材径向传热的方法也适用于木材纵向传热。     

Incorporation of transfer resistance between tracheary elements into hydraulic resistance models for tapered conduits

The model of West, Brown and Enquist (1999) shows that hydraulic resistance in trees can be independent of path length, provided that vascular conduits widen sufficiently from tree top to base. We demonstrate that this result does not depend theoretically on branching architecture or cross-sectional conductive area of the stem. Previous studies have shown that pit membrane resistance, encountered when water moves between either tracheids or vessels, accounts for up to 60% of the total resistance in stem segments. When pit membrane resistance, which is neglected by most whole-tree hydraulic models, was incorporated in hydraulic models in three different ways, the near invariance of hydraulic resistance was preserved. If relative pit resistance was independent of tracheid size or if tracheid dimensions were scaled to minimize wood resistivity, the minimum conduit taper required for path length independence equaled that in the original model of West et al. (1999). Under the most realistic model, in which relative pit resistance increased with tracheid radius, this value was doubled. Such taper is not possible within the typical size range of tracheids over the entire length of moderately tall trees, but it might be possible for vessel-bearing trees. Preliminary results indicated that although tracheid radius in the outer growth ring initially increased basipetally from the top of an 18-m tall Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), it stabilized at mid-trunk. Also, conduit taper was not constant in this species, violating a key assumption of the model of West et al. (1999), on which the invariance of hydraulic resistance depends.     

针叶树木材细胞力学及纵向弹性模量的计算--试件纵向弹性模量的预测

依据针叶树木材管胞和射线细胞的结构模型。使用计算机抽样模拟解剖结构参数。以及使用针叶树木材纵向弹性模量计算公式和方法,计算人工林杉木,马尾松幼龄材和成熟材试件纵向弹性模量,计算结果与常温条件下气干试件测定结果十分符合。在试件晚材率和管胞解剖结构参数改变的条件下。计算预测了人工林杉木,马尾松幼龄材和成熟材纵向弹性模量的变化。结果表明：试件纵向弹性模量随晚材率,管胞长度,管胞壁厚度的增加而增加,而试件纵向弹性模量随管胞直径增加而减小。本文提出的纵向弹性模量计算的预测方法,对于运用现代生物技术控制和改变针叶树木材的材质,材性有实际意义。     

广西融水特色红心杉木优树材质性状变异规律研究

[目的]通过测定和分析广西融水种源红心杉木优树材质性状指标,以了解该地区红心杉木材性状变异规律。[方法]以广西融水种源60株20年生的红心杉木优树为研究材料,测定单株材积、红心率、基本密度、组织比量、管胞性状、微纤丝角等10个材质性状指标,分析各材性性状指标分布和变异规律及性状间的相关关系。[结果]表明:红心率、基本密度、木射线比量、管胞比量、管胞长、管胞宽、管胞长宽比等性状数据分布服从正态分布。融水两个地区红心杉优树轴向薄壁细胞比量的变异系数分别为35.08%和44.97%,变异较大。管胞比量变异系数分别为3.28%和3.56%,变异较小。红心率、木射线比量、管胞长、管胞宽、微纤丝角等性状差异极显著(P0.01),轴向薄壁细胞比量差异显著(P0.05)。10个材质性状间存在12对表型显著相关。[结论]测定的10个性状均是连续性数量性状。早、晚材的管胞长度、管胞宽度和管胞长宽比等性状数据呈从心材至边材逐渐增加的规律。作为重要经济性状的红心率与木射线比量呈极显著正相关(P0.01),单株材积与轴向薄壁细胞比量呈显著正相关(P0.05),而单株材积与基本密度的相关性不显著,这使红心杉木生长量与材性相结合的遗传改良成为可能。     

The effect of openings on combined bound water and water vapor diffusion in wood

This study was undertaken to estimate the effect of openings between cell walls on combined bound water and water vapor diffusion in wood. Using a newly developed model, the radial and tangential moisture diffusion coefficients can be predicted depending on the opening area. The new model explicitly involves a term for water vapor diffusion through the openings, as well as a term for the combined diffusion of bound water and water vapor. A classical model developed by Stamm and Choong had higher longitudinal moisture diffusion coefficients than that in the parallel model at higher moisture content, which is inconsistent with the Wiener bound rule. The new model suggested in this article is useful for analyzing the experimental results and understanding the variability of the diffusion coefficients.     

赛黑桦的构造特征和物理力学性质

赛黑桦(Betula schmidtii),又称辽东桦,散孔材;木质厚重、坚硬,传统上用来制作车轴、木锤、擀面杖、算盘珠等(戚继忠等,2009;Akcehob et al.,2006),主要生长在我国东北东部与朝鲜接壤地区,与该地区相邻的朝鲜南部和俄罗斯南部海滨一带(锡霍特山脉南端)亦有分布,成年立木高约20m,树干直径约70cm,寿命约300～350年(Nechaeva,1972;Red     

Douglas-fir wood quality studies part I: Effects of age and stimulated growth on wood density and anatomy

Douglas-fir trees about 21 years old and growing on a poor site were thinned and fertilized causing accelerated growth. The characteristics of the wood across the 30-year age span were studied for 7 trees from the treated plot. Four trees of nearly uniform ring growth were also studied for some characteristics. Radial and tangential tracheid diameters, tracheid length and percent latewood were correlated quite well with log of age, coefficients ranged from 0.76 to 0.88 on pooled data. All tracheid dimensions when correlated with log of age gave high coefficients on a within-tree basis. The strongest relationship in all age-related factors was between 0 and 12 to 14 years. Specific gravity increased with age in all trees to about 16 to 18 years, then leveled off.Fertilization and thinning caused immediate production of lower density wood with somewhat lower percent latewood, a slight decrease in tracheid diameter tangentially but slightly greater radially, and a small decrease in tracheid length. The effects were mainly in the first 3 to 4 years after treatment, then there was recovery to normal wood density and cell dimensions. Wood from the trees of uniform growth showed no significant change over the same time period in percent latewood, specific gravity, and tracheid length.The research was financed by funds from State of Washington Initiative 171, Institute of Forest Products and the College of Forest Resources, University of Washington, Seattle.     

Research on the effect of microwave pretreatment on moisture diffusion coefficient of wood

Based on the pathway of moisture diffusion in wood below FSP, an improved moisture diffusion model has been proposed. The theoretical solution of the mathematic model shows that the diffusion coefficient for microwave pretreated wood was increased no more than 3% compared with that of wood without being treated even under extreme condition. Experiments indicate that the pit membrane structure can be effectively destroyed during microwave pretreatment, but the moisture diffusion coefficient can not be significantly improved. In practice, the effect of microwave pretreatment on moisture diffusion coefficient can be ignored. The drying rate of wood during the sequent conventional drying can not be significantly improved by microwave pretreatment.