Changes in Retrogradation Properties of Rice Starches with Amylose Content and Molecular Properties

The increases in storage modulus (G′), retrogradation enthalpy change (ΔH) and ΔH‐related Avrami kinetic parameters of gelatinized rice starch dispersions at 25% (w/w) were investigated with respect to storage period, amylose content (AC), and molecular properties. Three high‐AC and five low‐AC rice cultivars were compared for understanding the multiple influences of AC and molecular properties involved. After refining the results of correlation analysis, the G′ of just‐cooled samples changed positively, mainly with AC and additionally with the average chain length of amylose (CL_AM) and the weight ratio of extra‐long plus long chains to short chains of amylopectin (AP) (r_APchain). The developed ΔH on short‐term storage (10 days) elevated with increasing AC and CL_AM and decreasing degree of polymerization of AP (DP_AP), but after long‐term aging for one to three months with increasing r_APchain, especially for the low‐AC cultivars examined. Greater Avrami rate constants for retrogradation could be attributed to the combination of a lower DP_AP and r_APchain or AP chain length and a greater CL_AM. The polynomials using these critical factors to describe the retrogradation parameters were elucidated and could account for 85–99.6% of data deviations.     

Properties of Starches from Several Low‐Amylose Rice Cultivars

The starch properties of five low‐amylose rice cultivars, Yawarakomachi, Soft 158, Hanabusa, Aya, and Snow Pearl, were compared with those of two normal amylose rice cultivars, Nipponbare and Hinohikari. There were no large differences in the distributions of the amylopectin chain length determined by high‐performance anion‐exchange chromatography, and the starch gelatinization properties determined by differential scanning calorimetry, between normal and low‐amylose rice cultivars. Results obtained using rapid viscosity analysis indicated that low‐amylose rice starches had lower peak viscosity, breakdown, and setback values than normal amylose rice starches. Starch granules from low‐amylose rice cultivars had a higher susceptibility to glucoamylase than those from normal amylose rice cultivars. The results of this study showed some differences between normal and low‐amylose rice starches in pasting properties and enzymatic digestibility.     

Molecular Structure and Some Physicochemical Properties of High‐Amylose Barley Starches

The molecular structure and some physicochemical properties of starches from two high‐amylose cultivars of barley, high‐amylose Glacier A (HAG‐A) and N (HAG‐N), were examined and compared with those of a normal cultivar, Normal Glacier (NG). The true amylose contents of HAG‐A, HAG‐N, and NG were 41.0, 33.4, and 23.0%, respectively. Iodine affinities before and after defatting of starch, and thermograms of differential scanning calorimetry, indicated that HAG‐A and HAG‐N starches had a higher proportion of amylose‐lipid complex than did NG starch. The amylopectins from HAG‐A and HAG‐N were similar to NG amylopectin in average chain length (18–19), β‐amylolysis limit (β‐AL 56–57%), number‐average degrees of polymerization (DP_n 6,000–7,500) and chain length distribution. Very long chains (1–2%) were found in amylopectins from all cultivars. HAG‐A amylopectin had a larger amount of phosphorus (214 ppm) than the others. The amyloses from HAG‐A and HAG‐N resembled NG amylose in DP_n (950–1,080) and β‐AL (70–74%). However, HAG‐A and HAG‐N had a larger number of chains per molecule (NC 2.4–2.7) than NG amylose (1.8) and contained the branched amylose with a higher NC (9.5–10.6) than that of NG amylose (5.8), although molar fractions of the branched amylose (15–20%) were similar.     

Physicochemical and Pharmaceutical Properties of Cross‐Linked Carboxymethyl Rice Starch Prepared by a Simultaneous Dual Reaction

Cross‐linked carboxymethyl rice starches (CL‐CMRS) were prepared from reactions between a native Klong Luang 1 (KL1) rice starch and varied concentrations (2.5–15% w/w) of sodium trimetaphosphate (STMP) in simultaneous carboxymethylation and cross‐linking reactions set up using methanol as a solvent. Physicochemical as well as pharmaceutical properties of CL‐CMRS were evaluated in relation to the amount of STMP used and the degree of cross‐linking (DCx). At a low DCx, the viscosity of CMRS solution was enhanced through the formation of cross‐linked polymeric network and chain entanglement. At higher concentrations in the preparation reaction, STMP caused proportional decreases in the water solubility and ≤70‐fold of the solution viscosity, but promoted swelling and water uptake of the modified starches. Rheological behavior of the nonsoluble but swellable CL‐CMRS was similar to that of commercial superdisintegrants sodium starch glycolate (SSG), and cross‐carmellose sodium (CCS). The swelling and water uptake of CL‐CMRS were 5–7 and 6–25 times higher, respectively, than that of the native starch. Disintegration test of tablets containing 1 and 3% w/w of native and modified rice starches showed that M‐KL1‐5 and M‐KL1‐10 could be developed as tablet disintegrants.     

Physicochemical Properties of Sonicated Mung Bean,Potato, and Rice Starches

Mung bean, potato, and rice starch solutions (5%, w/w) were sonicated for up to 5 min after heating, and their physicochemical properties were investigated. Alkaline viscosities, including the apparent and inherent viscosities of starches, decreased. The residues of the swollen starch granules after pasting and centrifugation were also reduced prominently by sonication. Average degree of polymerization did not change with sonication. The starch paste became more transparent, and the hot paste viscosity measured at 70°C decreased remarkably. Results indicate that changes in the physicochemical properties of starch were induced by the disruption of swollen granules rather than the breakage of glucosidic linkages with sonication.     

不同中薯系列马铃薯淀粉组成与理化性质的差异分析

为分析不同品种马铃薯淀粉组成与理化性质的差异,本研究以15个不同品种中薯系列马铃薯为原料提取淀粉,并对其组成和理化性质进行了检测及相关性分析。光学显微镜和扫描电镜结果表明,马铃薯淀粉颗粒的粒径分布范围广,颗粒形貌存在差异,小颗粒多为卵圆形,大颗粒多为椭圆形、拉长形以及不规则形。不同马铃薯淀粉的理化性质存在显著差异,其溶解度、膨润力范围分别为25.92%~28.74%,4.90~6.26 g·g^-1;糊化初始温度(T_o)、峰值温度(T_p)、终止温度(T_c)、糊化焓值(ΔH)范围分别为61.44~65.55℃、64.49~68.69℃、67.87~72.54℃、7.21~13.49 J·g^-1;峰值黏度、衰减值、回生值范围分别为2 499.3~3 220.4、514.0~2 218.4、401.0~884.1 BU。相关性分析结果表明,马铃薯淀粉中磷含量与峰谷黏度呈显著正相关,与溶解度呈显著负相关;平均粒径D[4,3]与短程有序参数1 045/1 022 cm^-1 和1 022/995 cm^-1均呈显著正相关;T_o与峰值黏度呈显著负相关;糊化温度与峰值黏度和崩解值均呈显著负相关,与峰谷黏度、最终黏度和回生值均呈显著正相关。本研究结果可为中薯系列马铃薯淀粉在食品加工中的应用提供科学依据。     

Comparison of Physical Properties of Wheat Starch Gels with Different Amylose Content

The effects of amylose content and other starch properties on concentrated starch gel properties were evaluated using 10 wheat cultivars with different amylose content. Starches were isolated from grains of two waxy and eight nonwaxy wheat lines. The amylose content of waxy wheat lines was 1.4–1.7% and that of nonwaxy lines was 18.5–28.6%. Starch gels were prepared from a concentrated starch suspension (30 and 40%). Gelatinized starch was cooled and stored at 5°C for 1, 8, 16, 24, and 48 hr. The rheological properties of starch gels were studied by measuring dynamic viscoelasticity with parallel plate geometry. The low‐amylose starch showed a significantly lower storage shear modulus (G′) than starches with higher amylose content during storage. Waxy starch gel had a higher frequency dependence of G′ and properties clearly different from nonwaxy starches. In 40% starch gels, the starch with lower amylose showed a faster increase in G′ during 48 hr of storage, and waxy starch showed an extremely steep increase in G′. The amylose content and concentration of starch suspension markedly affected starch gel properties.     

Physicochemical Properties of Rice Starch Modified by Hydrothermal Treatments

Rice starches of long grain and waxy cultivars were annealed (ANN) in excess water at 50°C for 4 hr. They were also modified under heat-moisture treatment (HMT) conditions at 110°C with various moisture contents (20, 30, and 40%) for 8 hr. The modified products were analyzed by rapid-viscosity analysis (RVA), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Generally, these hydrothermal treatments altered the pasting and gelling properties of rice starch, resulting in lower viscosity peak heights, lower setbacks, and greater swelling consistency. The modified starch showed increased gelatinization temperatures and narrower gelatinization temperature ranges on ANN or broader ones on HMT. The effects were more pronounced for HMT than for ANN. Also, the typical A-type XRD pattern for rice starch remained unchanged after ANN or HMT at low moisture contents, and the amorphous content increased after HMT at 40% moisture content.     

A Comparative Study on Pasting and Hydration Properties of Native Rice Starches and Their Mixtures

Four rice starches were isolated from waxy and nonwaxy rice cultivars collected from different places in China. Individual rice starches were examined, along with their corresponding mixtures in different ratios, in terms of pasting and hydration properties. Analysis by micro‐viscoamylography (MVAG) showed that waxy rice starch and its blends had higher peak viscosity (PV), breakdown (BD), and setback (SB) than the remaining starches and mixtures. Apparent amylose content (AC) was 16.95–29.85% in nonwaxy individual rice starches and 13.69–25.07% in rice starch blends. Incorporating waxy rice starch (25%) significantly decreased the AC. AC correlated negatively with swelling power (SP) (r = ‐0.925, P < 0.01). SP exhibited nonlinear relationship (r² = 0.8204) with water solubility (WS) and both increased with temperature. The correlation showed that WS is also an index of starch characteristics and the granules rigidity affected the granule swelling potential. The results show that turbidity of gelatinized starch suspensions stored at 4 ± 0.5°C generally increased during storage up to five days.     

Paste Properties of Modified Starches from Partial Waxy Wheats

Properties of modified starches from partial waxy wheats have not been examined. Protease digestion of cracked kernels of three hard winter wheats varying in amylose content led to 82–85% recovery of starch, whereas kneading of the flour-water doughs gave 75–83% recovery. All starches had a protein content of <0.3% and ash content of <0.01%. Granule size distributions showed that starch from Ike kernels contained 86% A-type granules with a peak size of ≈18μm, and Karl-92 starch contained 77% A-type granules with a peak size of ≈16μm. The A-type granules (82%) from Rio Blanco starch were intermediate in size. The amylose content of Karl-92 starch, determined by concanavalin-A precipitation of amylpectin, was 28%, which was 17% higher than that of Ike starch (23%). The amylose content of Rio Blanco starch was 26%. The lipid content of Karl-92 starch, determined as fatty acid methyl esters, also was 18% higher than that of Ike starch (601 vs. 488 mg/100 g of starch, respectively). Wheat starches were modified with hydroxypropyl (HP) groups to low (1.5–2.5%) and medium (≈4.0%) levels, and the HP starches were cross-linked with phosphoryl chloride at levels of 0.003–0.075%. Pasting curves (amylograms) showed that Ike starch substituted with a low level of HP and optimally cross-linked with 0.025% phosphoryl chloride (starch basis) had a greater paste consistency than low HP cross-linked Karl-92, and Rio Blanco starches. At 4% HP and optimum cross-linking (0.003% phosphoryl chloride), the paste consistencies of the modified starches were nearly the same. The clarity of unmodified Ike starch paste was higher than that of Karl-92 or Rio Blanco starch pastes, and the clarity of all three pastes decreased as cross-linking was increased. Unmodified Ike starch formed a stronger gel than unmodified Karl-92 and Rio Blanco starches, but gel properties largely converged as the starches were modified.     

Physicochemical Properties of Zero Amylose Hull-less Barley Starch

Zero amylose starch isolated from hull-less barley (HB) showed a typical A-type diffraction pattern. The X-ray analysis suggested that granules of zero amylose (SB94794) and 5% amylose (CDC Candle) HB starches had lower crystallinity than did commercial waxy corn starch. Differential scanning calorimetry showed lower transition temperatures and endothermal enthalpies for the HB starches than for the waxy corn starch. The zero amylose HB starch showed a Brabender pasting curve similar to that of waxy corn starch, but with lower pasting and peak temperatures and a higher peak viscosity. Noteworthy characteristics of zero amylose HB starch were its low pasting temperature and high paste clarity and freezethaw stability, which make this starch useful for many food and industrial applications.     

Molecular Structure and Some Physicochemical Properties of Buckwheat Starches

The molecular structure and pasting properties of starches from eight buckwheat cultivars were examined. Rapid viscograms showed that buckwheat starches had similar pasting properties among cultivars. The actual amylose content was 16–18%, which was lower than the apparent amylose content (26–27%), due to the high iodine affinity (IA) of amylopectin (2.21–2.48 g/100 g). Amylopectins resembled each other in average chain‐length (23–24) and chain‐length distributions. The long‐chains fraction (LC) was abundant (12–13% by weight) in all the amylopectins, which was consistent with high IA values. The amyloses were also similar among the cultivars in number‐average DP 1,020–1,380 with 3.1–4.3 chains per molecule. The molar‐based distribution indicated that all the amyloses comprised two molecular species differing in molecular size, although the weight‐based distribution showed a single species. A comparison of molecular structures of buckwheat starches to cereal starches indicated buckwheat amylopectins had a larger amount of LC, and their distributions of amylose and short chains of amylopectin on molar basis were similar to those of wheat and barley starches.     

Initial Heating Temperature and Native Lipid Affects Ordering of Amylose During Cooling of High-Amylose Starches

Formation of ordered structures from disordered amylose is practically important. The thermal behavior of high-amylose maize starches was studied during cooling, following heating, and during subsequent reheating. Four commercial high-amylose genotype maize starches with varying amylose contents (ae du, ae su2, and ae [nominally both 50 and 70% amylose]) were heated to either 120, 140, 160, or 180°C, cooled to 5°C, and reheated to 180°C in a differential scanning calorimeter. Each starch was studied with its native lipid, as well as in reduced-lipid and lipid-free form. On cooling of lipid-containing starches, two distinct exotherms were observed and attributed to amylose-lipid complex formation and to amylose chain association. A distinct exotherm at ≈75°C was attributed to amylose-lipid complex formation. The exotherm attributed to amylose chain association on cooling varied according to the initial heat treatment, lipid level, and starch type. Starches with higher amylose contents showed larger exotherms on cooling. For initial heat treatments to 120 or 140°C, a broad exotherm beginning at ≈95°C was observed on cooling. In contrast, for initial heat treatments to 160 and 180°C, a sharper exotherm with a peak temperature below ≈55°C was observed. Upon reheating, samples that had been initially heated to 120 or 140°C showed a peak at >140°C that was attributed to the melting of ordered amylose. Starches initially heated to 160 or 180°C did not show this peak. This work illustrates that initial heating temperature, as well as lipid content and amylose content, all affect amylose chain association during cooling. Thus, this work suggests strategies for controlling ordering of amylose during processing.     

Rheological Properties of White Salted Noodles with Different Amylose Content at Small and Large Deformation

The rheological properties of cooked white salted noodles made from eight wheat cultivars with varied amylose content were analyzed at small and large deformation. Their dynamic shear viscoelasticity was measured using a rheometer with parallel plate geometry. Compressive force and creep‐recovery curves were measured using various probes and sample shapes. Noodles with lower amylose content showed a lower storage shear modulus (G′) and a higher frequency dependence of G′. The G′ values of noodles were highly correlated with amylose content in wheat flour and with G′ values of 30 and 40% starch gels. Remarkable differences in the characteristics of creep‐recovery curves were observed between cultivars. The difference in amylose content in wheat flour reflected the creep‐recovery properties of noodles. A negative correlation was demonstrated between amylose content and both maximum creep and recovery compliance. The compressive force required for 20, 50, 80, and 95% strains was compared. At 20 and 50% strain, noodles made from lower amylose wheat flour showed lower compressive force. Noodles of waxy wheat had a higher compressive force than nonwaxy noodles when the strain was >80%, indicating the waxy wheat noodles are soft but difficult to completely cut through.     

Effect of Physicochemical Properties of High‐Amylose Thai Rice Flours on Vermicelli Quality

Certain physicochemical properties, including chemical composition, pasting, thermal parameters, and the gel texture of flour prepared from six cultivars of Thai rice with similar high‐amylose content were determined. These properties were correlated with the quality of vermicelli prepared from these flours for cooking and textural properties. Flour prepared from a Thai rice cultivar currently used for commercial production of vermicelli served as reference for these comparisons. Many similarities, but some significant differences, in the physicochemical properties were observed between the test rice flours and to the reference cultivar. Vermicelli prepared from all of the test rice flours were within an acceptable range for cooking quality but showed greater variation in textural quality. Among the physicochemical properties, gel hardness was well correlated with cooking and textural quality of vermicelli, and was useful for predicting overall vermicelli quality.     

Rheological Properties of Starch Gels from Wheat Mutants with Reduced Amylose Content

Wheat lines with reduced amylose content were recently produced by single and double mutation from a low‐amylose line, Kanto 107. They are appropriate for clarifying the influence of amylose content on starch gel properties because of their similar genetic background. When measured using the concanavalin A method (ConA), the total amylose content of isolated starches from Kanto 107 and three mutants (K107Afpp4, Tanikei A6599‐4, K107Wx2) was 24.8, 18.5, 7.1, and 1.7%, respectively. Results of differential scanning calorimetry (DSC) showed that the difference in amylose content strongly affected gelatinization conclusion temperature and enthalpy. We prepared 30 and 40% starch gels and measured their dynamic shear viscoelasticity using a rheometer with parallel plate geometry. Compressive and creep‐recovery tests were conducted under uniaxial compression. The storage shear modulus correlated highly with the amylose content of starch in 30 and 40% starch gels. The creep‐recovery test showed a clear distinction in creep curves among starch samples. When the compressive force required for 50, 80, and 95% strains was compared, starch gels with lower amylose content showed lower compressive force at 50% strain. Waxy starch gel (K107Wx2) showed higher compressive force at strain >80% than other samples due to its sticky property.     

Effect of Growth Location in the United States on Amylose Content,Amylopectin Fine Structure,and Thermal Properties of Starches of Long Grain Rice Cultivars

Starch was isolated from kernels of 27 rice samples consisting of nine U.S. long grain rice cultivars grown in three different locations (Missouri, Arkansas, Texas). Amylose (AM) content of the starches and the fine structure of the respective amylopectin (AP) were determined and used to explain differences observed in gelatinization properties. The AM content of rice cultivars grown at the lower temperature Missouri location increased 0.4–3% and 0.5–4% when compared with the same rices grown in Arkansas and Texas, respectively. AP values of the rice samples were isolated, debranched, and separated by low‐pressure size‐exclusion chromatography. The eluted AP linear chains were divided into three fractions to represent extra long (FrI), long (FrII), and short chains (FrIII). The corresponding average degree of polymerization (DP_n) at the peaks of fractions FrI, FrII, and FrIII were 100, 39, and 16, respectively. Total carbohydrate analysis of the fractions indicated that cultivars grown in Missouri had a consistently higher proportion of FrIII and lower proportion of FrII as the same cultivars grown in Arkansas and Texas. Furthermore, the Missouri samples showed a shift toward shorter DP_n in FrII and FrIII and had more of the shortest chain components (DP_n < 6) of AP. The proportion of FrI did not follow a trend and varied depending on the cultivar and across location. Thermal analysis indicated that the higher temperature growth environments (Arkansas and Texas) resulted in higher onset, peak, and heat of gelatinization for the starches, suggesting longer cooking time and higher heat requirement. Overall, the data support the nonfield findings of other researchers that higher growing temperature results in AP with more DP_n short chains that are within a range of DP >10 to form consistent crystallites, and thus results in higher gelatinization temperatures and enthalpies.     

Effect of Amylose Content on Gelatinization,Retrogradation, and Pasting Properties of Starches from Waxy and Nonwaxy Wheat and Their F1 Seeds

We studied the effect of amylose content on the gelatinization, retrogradation, and pasting properties of starch using wheat starches differing in amylose content. Starches were isolated from waxy and nonwaxy wheat and reciprocal F1 seeds by crossing waxy and nonwaxy wheat. Mixing waxy and nonwaxy wheat starch produced a mixed starch with the same amylose content as F1 seeds for comparison. The amylose content of F1 seeds ranged between waxy and nonwaxy wheat. Nonwaxy‐waxy wheat had a higher amylose content than waxy‐nonwaxy wheat. Endothermic enthalpy and final gelatinization temperature measured by differential scanning calorimetry correlated negatively with amylose content. Gelatinization onset and peak temperature clearly differed between F1 and mixed starches with the same amylose content as F1 starches. Enthalpy for melting recrystallized starches correlated negatively with amylose content. Rapid Visco Analyser measurement showed that F1 starches had a higher peak viscosity than waxy and nonwaxy wheat starches. Mixed starches showed characteristic profiles with two low peaks. Setback and final viscosity correlated highly with amylose content. Some of gelatinization and pasting properties differed between F1 starches and mixed starches.     

Starch Pasting Properties and Amylose Content from 17 Waxy Barley Lines

Starch pasting properties and amylose content from 17 waxy barley lines (waxy gene originating from indigenous lines and an artificial mutant) were analyzed using rapid viscosity analysis (Rapid Visco Analyser [RVA]). Amylose contents varied from 0% (Shikoku‐hadaka 97) to 9.5% (Shikoku‐hadaka 96) compared with 30% for normal barley. Eight parameters were obtained from RVA profiles of these lines and correlation between each of these parameters and amylose content were evaluated. These parameters include pasting temperature (PT), peak viscosity (PV), temperature at PV, minimum viscosity (MV), final viscosity (FV), breakdown (BD), setback (SB), and time maintained at >80% PV (hot paste stability [HPS]). Significant correlations (0.64 and 0.61) were found between amylose content and FV and SB, respectively. High correlation (0.72) was found between amylose content and temperature at PV. HPS calculated from RVA profiles showed the highest correlation (0.79) to amylose content. Outer part of barley grains contained higher amounts of amylose than the inner part. There was a tendency that both PT and FV positively correlated to the amylose content of these parts.