Real-time quantitative PCR detection of genetically modified Maximizer maize and Roundup Ready soybean in some representative foods

A fast and quantitative method was developed to detect transgenic "Maximizer" maize "event 176" (Novartis) and "Roundup Ready" soybean (Monsanto) in food by real-time quantitative PCR. The use of the ABI Prism 7700 sequence detection system allowed the determination of the amplified product accumulation through a fluorogenic probe (TaqMan). Fluorescent dyes were chosen in such a way as to coamplify total and transgenic DNA in the same tube. Using real-time quantitative PCR, 2 pg of transgenic or total DNA per gram of starting sample was detected in 3 h after DNA extraction and the relative amounts of "Maximizer" maize and "Roundup Ready" soybean in some representative food products were quantified.     

Event-specific plasmid standards and real-time PCR methods for transgenic Bt11, Bt176, and GA21 maize and transgenic GT73 canola

Since the 18th of April 2004, two new regulations, EC/1829/2003 on genetically modified food and feed products and EC/1830/2003 on traceability and labeling of GMOs, are in force in the EU. This new, comprehensive regulatory framework emphasizes the need of an adequate tracing system. Unique identifiers, such as the transgene genome junction region or a specific rearrangement within the transgene DNA, should form the basis of such a tracing system. In this study, we describe the development of event-specific tracing systems for transgenic maize lines Bt11, Bt176, and GA21 and for canola event GT73. Molecular characterization of the transgene loci enabled us to clone an event-specific sequence into a plasmid vector, to be used as a marker, and to develop line-specific primers. Primer specificity was tested through qualitative PCRs and dissociation curve analysis in SYBR Green I real-time PCRs. The primers were then combined with event-specific TaqMan probes in quantitative real-time PCRs. Calibration curves were set up both with genomic DNA samples and the newly synthesized plasmid DNA markers. It is shown that cloned plasmid GMO target sequences are perfectly suitable as unique identifiers and quantitative calibrators. Together with an event-specific primer pair and a highly specific TaqMan probe, the plasmid markers form crucial components of a unique and straighforward tracing system for Bt11, Bt176, and GA21 maize and GT73 canola events.     

Development of a peptide nucleic acid array platform for the detection of genetically modified organisms in food

Two previously developed platforms, a multiplex polymerase chain reaction (PCR) and a peptide nucleic acid (PNA) array, the former allowing for the simultaneous detection of five transgenes and two endogenous controls in food and feed matrices and the latter for the assessment of the identity of amplified PCR products, were combined in order to develop a PNA array device for the screening of genetically modified organisms (GMOs) in food. PNA probes were opportunely designed, synthesized, and deposited on commercial slides. The length of the probes as well as the distance of the probes from the surface were evaluated and found to be critical points. The most suitable probes were found to be 15-mer PNAs linked to the slide surface by means of two 2-(2-aminoethoxy)ethoxyacetic acids as spacers. The device was tested on a model system constituted by flour samples containing a mixture of standards at known concentrations of transgenic material, in particular Roundup Ready soybean and Bt11, Bt176, Mon810, and GA21 maize: The DNA was amplified using the specific multiplex PCR method and tested on the PNA array. The method proposed was found to be able to correctly identify every GMO present in the tested samples.     

Development of a seven-target multiplex PCR for the simultaneous detection of transgenic soybean and maize in feeds and foods

The detection of genetically modified organisms (GMOs) in food and feed is an important issue for all the subjects involved in raw material control, food industry, and distribution. Because the number of GMOs authorized in the EU increased during the past few years, there is a need for methods that allow a rapid screening of products. In this paper, we propose a method for the simultaneous detection of four transgenic maize (MON810, Bt11, Bt 176, and GA21) and one transgenic soybean (Roundup Ready), which allows routine control analyses to be sped up. DNA was extracted either from maize and soybean seeds and leaves or reference materials, and the recombinant DNA target sequences were detected with 7 primer pairs, accurately designed to be highly specific for each investigated transgene. Cross and negative controls were performed to ensure the specificity of each primer pair. The method was validated on an interlaboratory ring test and good analytical parameters were obtained (LOD = 0.25%, Repeatability, (r) = 1; Reproducibility, (R) = 0.9). The method was then applied to a model biscuit made of transgenic materials baked for the purpose and to real samples such as feed and foodstuffs. On account of the high recognition specificity and the good detection limits, this multiplex PCR represents a fast and reliable screening method directly applicable in all the laboratories involved in raw material and food control.     

Development of one novel multiple-target plasmid for duplex quantitative PCR analysis of roundup ready soybean

To enforce the labeling regulations of genetically modified organisms (GMOs), the application of reference molecules as calibrators is becoming essential for practical quantification of GMOs. However, the reported reference molecules with tandem marker multiple targets have been proved not suitable for duplex PCR analysis. In this study, we developed one unique plasmid molecule based on one pMD-18T vector with three exogenous target DNA fragments of Roundup Ready soybean GTS 40-3-2 (RRS), that is, CaMV35S, NOS, and RRS event fragments, plus one fragment of soybean endogenous Lectin gene. This Lectin gene fragment was separated from the three exogenous target DNA fragments of RRS by inserting one 2.6 kb DNA fragment with no relatedness to RRS detection targets in this resultant plasmid. Then, we proved that this design allows the quantification of RRS using the three duplex real-time PCR assays targeting CaMV35S, NOS, and RRS events employing this reference molecule as the calibrator. In these duplex PCR assays, the limits of detection (LOD) and quantification (LOQ) were 10 and 50 copies, respectively. For the quantitative analysis of practical RRS samples, the results of accuracy and precision were similar to those of simplex PCR assays, for instance, the quantitative results were at the 1% level, the mean bias of the simplex and duplex PCR were 4.0% and 4.6%, respectively, and the statistic analysis ( t-test) showed that the quantitative data from duplex and simplex PCR had no significant discrepancy for each soybean sample. Obviously, duplex PCR analysis has the advantages of saving the costs of PCR reaction and reducing the experimental errors in simplex PCR testing. The strategy reported in the present study will be helpful for the development of new reference molecules suitable for duplex PCR quantitative assays of GMOs.     

Qualitative and quantitative evaluation of the genomic DNA extracted from GMO and non-GMO foodstuffs with four different extraction methods

The presence of DNA in foodstuffs derived from or containing genetically modified organisms (GMO) is the basic requirement for labeling of GMO foods in Council Directive 2001/18/CE (Off. J. Eur. Communities 2001, L1 06/2). In this work, four different methods for DNA extraction were evaluated and compared. To rank the different methods, the quality and quantity of DNA extracted from standards, containing known percentages of GMO material and from different food products, were considered. The food products analyzed derived from both soybean and maize and were chosen on the basis of the mechanical, technological, and chemical treatment they had been subjected to during processing. Degree of DNA degradation at various stages of food production was evaluated through the amplification of different DNA fragments belonging to the endogenous genes of both maize and soybean. Genomic DNA was extracted from Roundup Ready soybean and maize MON810 standard flours, according to four different methods, and quantified by real-time Polymerase Chain Reaction (PCR), with the aim of determining the influence of the extraction methods on the DNA quantification through real-time PCR.     

Reliable detection and identification of genetically modified maize, soybean, and canola by multiplex PCR analysis

Multiplex PCR procedures were developed for simultaneously detecting multiple target sequences in genetically modified (GM) soybean (Roundup Ready), maize (event 176, Bt11, Mon810, T14/25), and canola (GT73, HCN92/28, MS8/RF3, Oxy 235). Internal control targets (invertase gene in corn, lectin and beta-actin genes in soybean, and cruciferin gene in canola) were included as appropriate to assess the efficiency of all reactions, thereby eliminating any false negatives. Primer combinations that allowed the identification of specific lines were used. In one system of identification, simultaneous amplification profiling (SAP), rather than target specific detection, was used for the identification of four GM maize lines. SAP is simple and has the potential to identify both approved and nonapproved GM lines. The template concentration was identified as a critical factor affecting efficient multiplex PCRs. In canola, 75 ng of DNA template was more effective than 50 ng of DNA for the simultaneous amplification of all targets in a reaction volume of 25 microL. Reliable identification of GM canola was achieved at a DNA concentration of 3 ng/microL, and at 0.1% for GM soybean, indicating high levels of sensitivity. Nonspecific amplification was utilized in this study as a tool for specific and reliable identification of one line of GM maize. The primer cry1A 4-3' (antisense primer) recognizes two sites on the DNA template extracted from GM transgenic maize containing event 176 (European corn borer resistant), resulting in the amplification of products of 152 bp (expected) and 485 bp (unexpected). The latter fragment was sequenced and confirmed to be Cry1A specific. The systems described herein represent simple, accurate, and sensitive GMO detection methods in which only one reaction is necessary to detect multiple GM target sequences that can be reliably used for the identification of specific lines of GMOs.     

Biosensor technology and surface plasmon resonance for real-time detection of genetically modified Roundup Ready soybean gene sequences

Biospecific interaction analysis (BIA) was performed using surface plasmon resonance (SPR) and biosensor technologies to detect genetically modified Roundup Ready soybean gene sequences. We first immobilized, on SA sensor chips, single-stranded biotinylated oligonucleotides containing soybean lectin and Roundup Ready gene sequences, and the efficiency of hybridization to oligonucleotide probes differing in length was determined. Second, we immobilized biotinylated PCR products from nontransgenic soybeans (genomes carrying only the lectin gene), as well as from genetically modified Roundup Ready soybean, and we injected the oligonucleotide probes. Furthermore, we used the sensor chips carrying either lectin and Roundup Ready soybean PCR products or 21-mer oligonucleotide as probes, and we injected both nonpurified and purified asymmetric PCR products. The results obtained show that 13 and 15 mer oligonucleotides are suitable probes to detect genetically modified Roundup Ready soybean gene sequences (either target oligonucleotides or PCR products) under standard BIA experimental conditions. By contrast, when 11 mer DNA probes were employed, no efficient hybridization was obtained. All the SPR-based formats were found to be useful for detection of Roundup Ready gene sequences, suggesting that these procedures are useful for the real-time monitoring of hybridization between target single-stranded PCR products, obtained by using as substrates DNA isolated from normal or transgenic soybeans, and oligonucleotide or PCR-generated probes, therefore enabling a one-step, nonradioactive protocol to perform detection.     

Genetically modified organisms in food-screening and specific detection by polymerase chain reaction

PCR methods for the detection of genetically modified organisms (GMOs) were developed that can be used for screening purposes and for specific detection of glyphosate-tolerant soybean and insect-resistant maize in food. Primers were designed to amplify parts of the 35S promoter derived from Cauliflower Mosaic Virus, the NOS terminator derived from Agrobacterium tumefaciens and the antibiotic marker gene NPTII (neomycin-phosphotransferase II), to allow for general screening of foods. PCR/hybridization protocols were established for the detection of glyphosate-tolerant RoundUp Ready soybean and insect-resistant Bt-maize. Besides hybridization, confirmation of the results using restriction analysis was also possible. The described methods enabled a highly sensitive and specific detection of GMOs and thus provide a useful tool for routine analysis of raw and processed food products.     

Detection and quantification of roundup ready soy in foods by conventional and real-time polymerase chain reaction

Transgenic soybean line GTS-40-3-2, marketed under the trade name Roundup Ready (RR) soy, was developed by Monsanto (USA) to allow for the use of glyphosate, the active ingredient of the herbicide Roundup, as a weed control agent. RR soy was first approved in Canada for environmental release and for feed products in 1995 and later for food products in 1996 and is widely grown in Canada. Consumer concern issues have resulted in proposed labeling regulations in Canada for foods derived from genetically engineered crops. One requirement for labeling is the ability to detect and accurately quantify the amount of transgenic material present in foods. Two assays were evaluated. A conventional qualitative Polymerase Chain Reaction (PCR) assay to detect the presence of soy and RR soy and a real-time PCR to quantify the amount of RR soy present in samples that tested positive in the first assay. PCR controls consisted of certified RR soy reference material, single transgenic soybeans, and a processed food sample containing a known amount of RR soy. To test real-world applicability, a number of common grocery store food items that contain soy-based products were tested. For some samples, significant differences in amplification efficiencies during the quantitative PCR assays were observed compared to the controls, resulting in potentially large errors in quantification. A correction factor was used to try to compensate for these differences.     

Detection methods for biotech cotton MON 15985 and MON 88913 by PCR

Plants derived through agricultural biotechnology, or genetically modified organisms (GMOs), may affect human health and ecological environment. A living GMO is also called a living modified organism (LMO). Biotech cotton is a GMO in food or feed and also an LMO in the environment. Recently, two varieties of biotech cotton, MON 15985 and MON 88913, were developed by Monsanto Co. The detection method is an essential element for the GMO labeling system or LMO management of biotech plants. In this paper, two primer pairs and probes were designed for specific amplification of 116 and 120 bp PCR products from MON 15985 and MON 88913, respectively, with no amplification from any other biotech cotton. Limits of detection of the qualitative method were all 0.05% for MON 15985 and MON 88913. The quantitative method was developed using a TaqMan real-time PCR. A synthetic plasmid, as a reference molecule, was constructed from a taxon-specific DNA sequence of cotton and two construct-specific DNA sequences of MON 15985 and MON 88913. The quantitative method was validated using six samples that contained levels of biotech cotton mixed with conventional cotton ranging from 0.1 to 10.0%. As a result, the biases from the true value and the relative deviations were all within the range of +/-20%. Limits of quantitation of the quantitative method were all 0.1%. Consequently, it is reported that the proposed detection methods were applicable for qualitative and quantitative analyses for biotech cotton MON 15985 and MON 88913.     

Development of a screening method for genetically modified soybean by plasmid-based quantitative competitive polymerase chain reaction

A novel type of quantitative competitive polymerase chain reaction (QC-PCR) system for the detection and quantification of the Roundup Ready soybean (RRS) was developed. This system was designed based on the advantage of a fully validated real-time PCR method used for the quantification of RRS in Japan. A plasmid was constructed as a competitor plasmid for the detection and quantification of genetically modified soy, RRS. The plasmid contained the construct-specific sequence of RRS and the taxon-specific sequence of lectin1 (Le1), and both had 21 bp oligonucleotide insertion in the sequences. The plasmid DNA was used as a reference molecule instead of ground seeds, which enabled us to precisely and stably adjust the copy number of targets. The present study demonstrated that the novel plasmid-based QC-PCR method could be a simple and feasible alternative to the real-time PCR method used for the quantification of genetically modified organism contents.     

Comparative studies of the quantification of genetically modified organisms in foods processed from maize and soy using trial producing

Seven types of processed foods, namely, cornstarch, cornmeal, corn puffs, corn chips, tofu, soy milk, and boiled beans, were trial produced from 1 and 5% (w/w) genetically modified (GM) mixed raw materials. In this report, insect resistant maize (MON810) and herbicide tolerant soy (Roundup Ready soy, 40-3-2) were used as representatives of GM maize and soy, respectively. Deoxyribonucleic acid (DNA) was extracted from the raw materials and the trial-produced processed food using two types of methods, i.e., the silica membrane method and the anion exchange method. The GM% values of these samples were quantified, and the significant differences between the raw materials and the trial-produced processed foods were statistically confirmed. There were some significant differences in the comparisons of all processed foods. However, our quantitative methods could be applied as a screening assay to tofu and soy milk because the differences in GM% between the trial-produced processed foods and their raw materials were lower than 13 and 23%, respectively. In addition, when quantitating with two primer pairs (SSIIb 3, 114 bp; SSIIb 4, 83 bp for maize and Le1n02, 118 bp; Le1n03, 89 bp for soy), which were targeted within the same taxon specific DNA sequence with different amplicon sizes, the ratios of the copy numbers of the two primer pairs (SSIIb 3/4 and Le1n02/03) decreased with time in a heat-treated processing model using an autoclave. In this report, we suggest that the degradation level of DNA in processed foods could be estimated from these ratios, and the probability of GM quantification could be experimentally predicted from the results of the trial producing.     

Applicability of the quantification of genetically modified organisms to foods processed from maize and soy

The applicability of quantifying genetically modified (GM) maize and soy to processed foods was investigated using heat treatment processing models. The detection methods were based on real-time quantitative polymerase chain reaction (PCR) analysis. Ground seeds of insect resistant GM maize (MON810) and glyphosate tolerant Roundup Ready (RR) soy were dissolved in water and were heat treated by autoclaving for various time intervals. The calculated copy numbers of the recombinant and taxon specific deoxyribonucleic acid (DNA) sequences in the extracted DNA solution were found to decrease with time. This decrease was influenced by the PCR-amplified size. The conversion factor (Cf), which is the ratio of the recombinant DNA sequence to the taxon specific DNA sequence and is used as a constant number for calculating GM% at each event, tended to be stable when the sizes of PCR products of two DNA sequences were nearly equal. The results suggested that the size of the PCR product plays a key role in the quantification of GM organisms in processed foods. It is believed that the Cf of the endosperm (3n) is influenced by whether the GM originated from a paternal or maternal source. The embryos and endosperms were separated from the F1 generation seeds of five GM maize events, and their Cf values were measured. Both paternal and maternal GM events were identified. In these, the endosperm Cf was lower than that of the embryo, and the embryo Cf was lower than that of the endosperm. These results demonstrate the difficulties encountered in the determination of GM% in maize grains (F2 generation) and in processed foods from maize and soy.     

Event specific qualitative and quantitative polymerase chain reaction detection of genetically modified MON863 maize based on the 5'-transgene integration sequence

Because of the genetically modified organisms (GMOs) labeling policies issued in many countries and areas, polymerase chain reaction (PCR) methods were developed for the execution of GMO labeling policies, such as screening, gene specific, construct specific, and event specific PCR detection methods, which have become a mainstay of GMOs detection. The event specific PCR detection method is the primary trend in GMOs detection because of its high specificity based on the flanking sequence of the exogenous integrant. This genetically modified maize, MON863, contains a Cry3Bb1 coding sequence that produces a protein with enhanced insecticidal activity against the coleopteran pest, corn rootworm. In this study, the 5'-integration junction sequence between the host plant DNA and the integrated gene construct of the genetically modified maize MON863 was revealed by means of thermal asymmetric interlaced-PCR, and the specific PCR primers and TaqMan probe were designed based upon the revealed 5'-integration junction sequence; the conventional qualitative PCR and quantitative TaqMan real-time PCR detection methods employing these primers and probes were successfully developed. In conventional qualitative PCR assay, the limit of detection (LOD) was 0.1% for MON863 in 100 ng of maize genomic DNA for one reaction. In the quantitative TaqMan real-time PCR assay, the LOD and the limit of quantification were eight and 80 haploid genome copies, respectively. In addition, three mixed maize samples with known MON863 contents were detected using the established real-time PCR systems, and the ideal results indicated that the established event specific real-time PCR detection systems were reliable, sensitive, and accurate.     

Development of taxon-specific sequences of common wheat for the detection of genetically modified wheat

Qualitative and quantitative Polymerase Chain Reaction (PCR) systems aimed at the specific detection and quantification of common wheat DNA are described. Many countries have issued regulations to label foods that include genetically modified organisms (GMOs). PCR technology is widely recognized as a reliable and useful technique for the qualitative and quantitative detection of GMOs. Detection methods are needed to amplify a target GM gene, and the amplified results should be compared with those of the corresponding taxon-specific reference gene to obtain reliable results. This paper describes the development of a specific DNA sequence in the waxy-D1 gene for common wheat (Triticum aestivum L.) and the design of a specific primer pair and TaqMan probe on the waxy-D1 gene for PCR analysis. The primers amplified a product (Wx012) of 102 bp. It is indicated that the Wx012 DNA sequence is specific to common wheat, showing homogeneity in qualitative PCR results and very similar quantification accuracy along 19 distantly related common wheat varieties. In Southern blot and real-time PCR analyses, this sequence showed either a single or a low number of copy genes. In addition, by qualitative and quantitative PCR using wx012 primers and a wx012-T probe, the limits of detection of the common wheat genome were found to be about 15 copies, and the reproducibility was reliable. In consequence, the PCR system using wx012 primers and wx012-T probe is considered to be suitable for use as a common wheat-specific taxon-specific reference gene in DNA analyses, including GMO tests.     

Detection of genetically modified soybean using peptide nucleic acids (PNAs) and microarray technology

Peptide nucleic acid (PNA) microarrays for the detection of Roundup Ready soybeans in food have been prepared. PNA probes are known to be more efficient and selective in binding DNA sequences than the analogous oligonucleotides and are very suitable to be used for diagnostics in food. PNAs of different lengths were carefully designed and synthesized by solid-phase synthesis on an automatic synthesizer adopting the BOC strategy. PNAs were purified by HPLC and characterized by HPLC/MS. The probes were spotted on a functionalized surface to produce a microarray to be hybridized with PCR products. DNA extracted from reference material was amplified using Cy3- and Cy5-labeled primers, and the fluorescent PCR products obtained were hybridized on the microarray. Two protocols were adopted: the hybridization with dsDNA or with ssDNA obtained by digestion with the enzyme lambda exonuclease. The best results were obtained using a 15-mer PNA probe in combination with the ssPCR product derived from enzymatic digestion. The method was applied to the analysis of a sample of certified transgenic soybean flour.     

Development of a real-time PCR method for the differential detection and quantification of four solanaceae in GMO analysis: potato (Solanum tuberosum), tomato (Solanum lycopersicum), eggplant (Solanum melongena), and pepper (Capsicum annuum)

The labeling of products containing genetically modified organisms (GMO) is linked to their quantification since a threshold for the presence of fortuitous GMOs in food has been established. This threshold is calculated from a combination of two absolute quantification values: one for the specific GMO target and the second for an endogenous reference gene specific to the taxon. Thus, the development of reliable methods to quantify GMOs using endogenous reference genes in complex matrixes such as food and feed is needed. Plant identification can be difficult in the case of closely related taxa, which moreover are subject to introgression events. Based on the homology of beta-fructosidase sequences obtained from public databases, two couples of consensus primers were designed for the detection, quantification, and differentiation of four Solanaceae: potato (Solanum tuberosum), tomato (Solanum lycopersicum), pepper (Capsicum annuum), and eggplant (Solanum melongena). Sequence variability was studied first using lines and cultivars (intraspecies sequence variability), then using taxa involved in gene introgressions, and finally, using taxonomically close taxa (interspecies sequence variability). This study allowed us to design four highly specific TaqMan-MGB probes. A duplex real time PCR assay was developed for simultaneous quantification of tomato and potato. For eggplant and pepper, only simplex real time PCR tests were developed. The results demonstrated the high specificity and sensitivity of the assays. We therefore conclude that beta-fructosidase can be used as an endogenous reference gene for GMO analysis.     

Identification of PCR-amplified genetically modified organisms (GMOs) DNA by peptide nucleic acid (PNA) probes in anion-exchange chromatographic analysis

PCR products obtained by selective amplification of transgenic DNA derived from food samples containing Roundup Ready soybean or Bt-176 maize have been analyzed by anion-exchange HPLC. Peptide nucleic acids (PNAs), oligonucleotide analogues known to bind to complementary single-stranded DNA with high affinity and specificity, have been used as specific probes in order to assess the identity of the peaks observed. Two different protocols were adopted in order to obtain single-stranded DNA: amplification with an excess of one primer or digestion of one DNA strand. The single-stranded DNA was mixed with the PNA probe, and the presence of a specific sequence was revealed through detection of the corresponding PNA:DNA peak with significantly different retention time. Advantages and limits of this approach are discussed. The method was tested with reference materials and subsequently applied to commercial samples.     

Event-specific real-time detection and quantification of genetically modified Roundup Ready soybean

The event-specific real-time detection and quantification of Roundup Ready soybean (RRS) using an ABI PRISM 7700 sequence detection system with light upon extension (LUX) primer was developed in this study. The event-specific primers were designed, targeting the junction of the RRS 5' integration site and the endogenous gene lectin1. Then, a standard reference plasmid was constructed that carried both of the targeted sequences for quantitative analysis. The detection limit of the LUX real-time PCR system was 0.05 ng of 100% RRS genomic DNA, which was equal to 20.5 copies. The range of quantification was from 0.1 to 100%. The sensitivity and range of quantification successfully met the requirement of the labeling rules in the European Union and Taiwan.