Macroscopic hierarchical surface patterning of porphyrin trimers via self-assembly and dewetting

The use of bottom-up approaches to construct patterned surfaces for technological applications is appealing, but to date is applicable to only relatively small areas (approximately 10 square micrometers). We constructed highly periodic patterns at macroscopic length scales, in the range of square millimeters, by combining self-assembly of disk-like porphyrin dyes with physical dewetting phenomena. The patterns consisted of equidistant 5-nanometer-wide lines spaced 0.5 to 1 micrometers apart, forming single porphyrin stacks containing millions of molecules, and were formed spontaneously upon drop-casting a solution of the molecules onto a mica surface. On glass, thicker lines are formed, which can be used to align liquid crystals in large domains of square millimeter size.     

Aerosol effect on cloud droplet size monitored from satellite

Aerosol concentration and cloud droplet radii derived from space-borne measurements are used to explore the effect of aerosols on cloud microphysics. Cloud droplet size is found to be largest (14 micrometers) over remote tropical oceans and smallest (6 micrometers) over highly polluted continental areas. Small droplets are also present in clouds downwind of continents. By using estimates of droplet radii coupled with aerosol load, a statistical mean relationship is derived. The cloud droplet size appears to be better correlated with an aerosol index that is representative of the aerosol column number under some assumptions than with the aerosol optical thickness. This study reveals that the effect of aerosols on cloud microphysics is significant and occurs on a global scale.     

Obsidian hydration dates glacial loading?

Three different groups of hydration rinds have been measured on thin sections of obsidian from Obsidian Cliff, Yellowstone National Park, Wyoming. The average thickness of the thickest (oldest) group of hydration rinds is 16.3 micrometers and can be related to the original emplacement of the flow 176,000 years ago (potassium-argon age). In addition to these original surfaces, most thin sections show cracks and surfaces which have average hydration rind thicknesses of 14.5 and 7.9 micrometers. These later two hydration rinds compare closely in thickness with those on obsidian pebbles in the Bull Lake and Pinedale terminal moraines in the West Yellowstone Basin, which are 14 to 15 and 7 to 8 micrometers thick, respectively. The later cracks are thought to have been formed by glacial loading during the Bull Lake and Pinedale glaciations, when an estimated 800 meters of ice covered the Obsidian Cliff flow.     

Ordered metal nanohole arrays made by a two-step replication of honeycomb structures of anodic alumina

A highly ordered metal nanohole array (platinum and gold) was fabricated by a two-step replication of the honeycomb structure of anodic porous alumina. Preparation of the negative porous structure of porous alumina followed by the formation of the positive structure with metal resulted in a honeycomb metallic structure. The metal hole array of the film has a uniform, closely packed honeycomb structure approximately 70 nanometers in diameter and from 1 to 3 micrometers thick. Because of its textured surface, the metal hole array of gold showed a notable color change compared with bulk gold.     

Contact electrification and adhesion between dissimilar materials

Simultaneous measurements of surface force and surface charge demonstrate strong attraction due to the spontaneous transfer of electrical charge from one smooth insulator (mica) to another (silica) as a result of simple, nonsliding contact in dry nitrogen. The measured surface charge densities are 5 to 20 millicoulombs per square meter after contact. The work required to separate the charged surfaces is typically 6 to 9 joules per square meter, comparable to the fracture energies of ionic-covalent materials. Observation of partial gas discharges when the surfaces are approximately 1 micrometer apart gives valuable insight into the charge separation processes underlying static electrical phenomena in general.     

Protein dynamics control the kinetics of initial electron transfer in photosynthesis

The initial electron transfer dynamics during photosynthesis have been studied in Rhodobacter sphaeroides reaction centers from wild type and 14 mutants in which the driving force and the kinetics of charge separation vary over a broad range. Surprisingly, the protein relaxation kinetics, as measured by tryptophan absorbance changes, are invariant in these mutants. By applying a reaction-diffusion model, we can fit the complex electron transfer kinetics of each mutant quantitatively, varying only the driving force. These results indicate that initial photosynthetic charge separation is limited by protein dynamics rather than by a static electron transfer barrier.     

Nerves in cortical bone

Modified electron-microscopic techniques permit the sectioning of fully mineralized compact bone. Cortical canals in human femur are extensively innervated. Most nerves are unmyelinated and range from 0.5 to 10 micrometers in diameter. I have found a few mixed nerves (myelinated and unmyelinated fibers), one of which was 130 micrometers in diameter.     

Far-infrared observations of the night sky

We have flown a telescope cooled to liquid-helium temperatures and made far-infrared observations of the night sky. A gallium-doped germanium detector, sensitive from 5.2 to 130 micrometers, detected a minimum signal of 10(-9) watt per square centimeter per steradian referred to 100 micrometers. The origin of this signal can be instrumental, atmospheric, interplanetary, or interstellar. We can place a firm upper limit on the color temperature of a dilute cosmic background flux.     

Photoconductive coaxial nanotubes of molecularly connected electron donor and acceptor layers

Controlled self-assembly of a trinitrofluorenone-appended gemini-shaped amphiphilic hexabenzocoronene selectively formed nanotubes or microfibers with different photochemical properties. In these nanotubes, which are 16 nanometers in diameter and several micrometers long, a molecular layer of electron-accepting trinitrofluorenone laminates an electron-donating graphitic layer of pi-stacked hexabenzocoronene. The coaxial nanotubular structure allows photochemical generation of spatially separated charge carriers and a quick photoconductive response with a large on/off ratio greater than 10(4). In sharp contrast, the microfibers consist of a charge-transfer complex between the hexabenzocoronene and trinitrofluorenone parts and exhibit almost no photocurrent generation.     

Calibrated membranes with coated pore walls

Extremely uniform small-radius pores, formed in thin mica membranes, have been coated with monoand multimolecular layers of fatty acids. Stearate monolayers orient themselves on the pore walls in layers 25 to 28 angstroms thick. The resulting membranes, with radii of the order 100 angstroms or less, may have applications in simulating certain features of biological membranes and in fabricating highly selective membranes for differential dialysis or ultrafiltration.     

Isozymes of phenylalanine hydroxylase

Three isozymes of phenylalanine hydroxylase exist in adult rat liver. They are chromatographically unique. Partial chracterization suggests that they are similar in chemical properties and differ only in charge. Estimation of the Stokes radii indicates that the isozymes have similar molecular weights of about 200,000. Two isozymes exist in human fetal liver. Alterations of the relative amounts of these isozymes may control the phenotype of the disease phenylketonuria.     

金属离子水化能的计算

本文利用单参数z~*/ri总结金属离子水化能的数据。得出经验公式Li=b+az~*/ri,z~*为有效核电荷,ri为离子半径。a,b是经验常数,对一、二、三、四价金属离子分别为,50和20,98和182,113.5和460,85和1155。本文计算了55个金属离子,同实验值比较,百分误差在2％以内的有47个。此法简便,结果也比文献[4]、[5]好。     

Improved orbital and physical parameters for the pluto-charon system

Analysis of the observations of several Pluto-Charon occultation and transit events in 1985 and 1986 has provided a more detailed knowledge of the system. The sum of the radii of Pluto and Charon is 1786 +/- 19 kilometers, but the individual radii are somewhat more poorly determined; Pluto is 1145 +/- 46 kilometers in radius and Charon is 642 +/- 34 kilometers in radius. The mean density of the system is 1.84 +/- 0.19 grams per cubic centimeter, implying that more than half of the mass is due to rock. Charon appears to have hemispheres of two different colors, the Plutofacing side being neutral in color and the opposite hemisphere being a reddish color similar to Pluto.     

Origin of Saturn's E Ring: Self-Sustained, Naturally

Saturn's diffuse E ring spans the region between 3 and 8 saturnian radii (R(s)), has its peak brightness near the orbit of the satellite Enceladus (3.95 R(s)), and is thought to be composed primarily of icy particles 1.0 +/- 0.3 micrometers in radius. Such particles are shown to move periodically along highly elliptical paths that cross the orbits of several saturnian satellites; the resulting energetic collisions of E ring particles with embedded satellites are capable of sustaining the E ring at its current optical depth. With several reasonable assumptions, this model naturally selects Enceladus as the primary source of ring material and may also provide mechanisms that explain the generation of the unusual amount of submicrometer dust in the neighboring F and G rings, the excess of OH molecules observed within the E ring, and the orbital brightness variations of nearby satellites.     

Hindered diffusion in microporous membranes with known pore geometry

The hindrance effect on the aqueous diffusion rate of solutes within membrane pores of molecular size has been accurately determined. Mica membranes, 3 to 5 micrometers thick, were prepared with uniform, straight pores from 90 to 600 angstroms in diameter. With these membranes a direct estimation was possible of the interaction between pore size and molecular diffusion rates. There were no uncertainties due to wide pore size distributions or nonuniform tortuous channels as in previously used model microporous materials such as dialysis tubing or gels. Aqueous diffusion rates through these mica membranes were measured for a series of compounds with molecular diameters from 5.2 to 43 angstroms and were corrected for "liquid film resistances" adjacent to the membrane-solution interface to obtain estimates of molecular diffusivities within the micropores of the membrane. Definite evidence is presented showing that, even when molecular size is a small fraction of pore size, diffusion rates decrease markedly. The apparent reduction in solute diffusivity in the microporous membrane can be quantitatively estimated by means of the Renkin equation for hindered diffusion.     

Archean microfossils showing cell division from the swaziland system of South Africa

A newly discovered population of organic walled microstructures from the Swaziland System, South Africa, is considered to be biological on the following grounds: (i) the structures are carbonaceous and occasionally have internal organic contents; (ii) the population has a narrow unimodal size frequency distribution (average diameter, 2.5 micrometers; range, 1 to 4 micrometers); (iii) the structures are not strictly spherical, but are commonly flattened and folded like younger microfossils; (iv) the sedimentary context is consistent with biogenic origins; and (v) various stages of binary division are clearly preserved.     

一种基于图像的套印参数测量方法

提出了一种新的基于图像套印参数的检测方法.该方法在应用蜂窝分裂法实现图像量化的基础上,确定色标分割的颜色中心和阈值距离.经过计算色标质心间横向和纵向距离得到印刷套印偏差参数.经过计算色标与标准图像颜色的色差,建立色度与密度的转换关系,将色度值转换为对应的密度值,由网点参数与供墨系统的数学模型,计算出被检测处的实际墨量.理论分析与实验结果均表明:套印偏差检测精度高,有利于提高套印的准确性,油墨的质量和供墨量的实时检测,有利于实现墨量的自动控制,保证印刷图像整个画面阶调和色调的正确复制.     

Spatial Organization and Time Dependence of Jupiter's Tropospheric Temperatures, 1980-1993

The spatial organization and time dependence of Jupiter's temperatures near 250-millibar pressure were measured through a jovian year by imaging thermal emission at 18 micrometers. The temperature field is influenced by seasonal radiative forcing, and its banded organization is closely correlated with the visible cloud field. Evidence was found for a quasi-periodic oscillation of temperatures in the Equatorial Zone, a correlation between tropospheric and stratospheric waves in the North Equatorial Belt, and slowly moving thermal features in the North and South Equatorial Belts. There appears to be no common relation between temporal changes of temperature and changes in the visual albedo of the various axisymmetric bands.     

Ordered lattice defects in colored fluorite: direct observations

Ordered arrays of defect aggregates in the (111) planes of natural fluorite have been observed by transmission electron microscopy. The intense blue coloration observed in corresponding sample areas after 200-kilovolt electron microscopy confirms the conclusion that these are color-center aggregates and, conversely, that color centers are primarily responsible for fluorite coloration.     

Parent volatiles in comet 9P/Tempel 1: before and after impact

We quantified eight parent volatiles (H2O, C2H6, HCN, CO, CH3OH, H2CO, C2H2, and CH4) in the Jupiter-family comet Tempel 1 using high-dispersion infrared spectroscopy in the wavelength range 2.8 to 5.0 micrometers. The abundance ratio for ethane was significantly higher after impact, whereas those for methanol and hydrogen cyanide were unchanged. The abundance ratios in the ejecta are similar to those for most Oort cloud comets, but methanol and acetylene are lower in Tempel 1 by a factor of about 2. These results suggest that the volatile ices in Tempel 1 and in most Oort cloud comets originated in a common region of the protoplanetary disk.