Chitosan-Based Anti-Oxidation Delivery Nano-Platform: Applications in the Encapsulation of DHA-Enriched Fish Oil

Refined cobia liver oil is a nutritional supplement (CBLO) that is rich in polyunsaturated fatty acids (PUFAs), such as DHA and EPA; however, PUFAs are prone to oxidation. In this study, the fabrication of chitosan-TPP-encapsulated CBLO nanoparticles (CS@CBLO NPs) was achieved by a two-step method, including emulsification and the ionic gelation of chitosan with sodium tripolyphosphate (TPP). The obtained nanoparticles were inspected by dynamic light scattering (DLS) and showed a positively charged surface with a z-average diameter of between 174 and 456 nm. Thermogravimetric analysis (TGA) results showed the three-stage weight loss trends contributing to the water evaporation, chitosan decomposition, and CBLO decomposition. The loading capacity (LC) and encapsulation efficiency (EE) of the CBLO loading in CS@CBLO NPs were 17.77–33.43% and 25.93–50.27%, respectively. The successful encapsulation of CBLO in CS@CBLO NPs was also confirmed by the Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) techniques. The oxidative stability of CBLO and CS@CBLO NPs was monitored by FTIR. As compared to CBLO, CS@CBLO NPs showed less oxidation with a lower generation of hydroperoxides and secondary oxidation products after four weeks of storage. CS@CBLO NPs are composed of two ingredients that are beneficial for health, chitosan and fish oil in a nano powdered fish oil form, with an excellent oxidative stability that will enhance its usage in the functional food and pharmaceutical industries.     

Enhancing Stability and Mucoadhesive Properties of Chitosan Nanoparticles by Surface Modification with Sodium Alginate and Polyethylene Glycol for Potential Oral Mucosa Vaccine Delivery

Background: The present study aimed to fabricate surface-modified chitosan nanoparticles with two mucoadhesive polymers (sodium alginate and polyethylene glycol) to optimize their protein encapsulation efficiency, improve their mucoadhesion properties, and increase their stability in biological fluids. Method: Ionotropic gelation was employed to formulate chitosan nanoparticles and surface modification was performed at five different concentrations (0.05, 0.1, 0.2, 0.3, 0.4% w/v) of sodium alginate (ALG) and polyethylene glycol (PEG), with ovalbumin (OVA) used as a model protein antigen. The functional characteristics were examined by dynamic light scattering (DLS), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM)/scanning transmission electron microscopy (STEM). Stability was examined in the presence of simulated gastric and intestinal fluids, while mucoadhesive properties were evaluated by in vitro mucin binding and ex vivo adhesion on pig oral mucosa tissue. The impact of the formulation and dissolution process on the OVA structure was investigated by sodium dodecyl-polyacrylamide gel electrophoresis (SDS-PAGE) and circular dichroism (CD). Results: The nanoparticles showed a uniform spherical morphology with a maximum protein encapsulation efficiency of 81%, size after OVA loading of between 200 and 400 nm and zeta potential from 10 to 29 mV. An in vitro drug release study suggested successful nanoparticle surface modification by ALG and PEG, showing gastric fluid stability (4 h) and a 96 h sustained OVA release in intestinal fluid, with the nanoparticles maintaining their conformational stability (SDS-PAGE and CD analyses) after release in the intestinal fluid. An in vitro mucin binding study indicated a significant increase in mucin binding from 41 to 63% in ALG-modified nanoparticles and a 27–49% increase in PEG-modified nanoparticles. The ex vivo mucoadhesion showed that the powdered particles adhered to the pig oral mucosa. Conclusion: The ALG and PEG surface modification of chitosan nanoparticles improved the particle stability in both simulated gastric and intestinal fluids and improved the mucoadhesive properties, therefore constituting a potential nanocarrier platform for mucosal protein vaccine delivery.     

Fucoxanthin@Polyvinylpyrrolidone Nanoparticles Promoted Oxidative Stress-Induced Cell Death in Caco-2 Human Colon Cancer Cells

Fucoxanthin (FX), a natural carotenoid found in seaweed with multiple functional activities, is unstable with a poor water solubility that limits its utilization. This study aimed to improve FX’s stability and bioavailability via the nano-encapsulation of FX in polyvinylpyrrolidone (PVP)-coated FX@PVP nanoparticles (NPs). The FX@PVP NPs were evaluated in terms of their morphology, stability, encapsulation efficiency (EE), loading capacity (LC), and in vitro release to optimize the encapsulation parameters, and a 1:8 FX:PVP ratio was found to perform the best with the highest EE (85.50 ± 0.19%) and LC (10.68 ± 0.15%) and improved FX stability. In addition, the FX@PVP NPs were shown to effectively deliver FX into Caco-2 cancer cells, and the accumulation of FX in these cancer cells showed pro-oxidative activities to ameliorate H₂O₂-induced damage and cell death. The FX@PVP NPs could potentially become a new therapeutical approach for targeted cancer treatment.     

Chitosan nanoparticles act as an adjuvant to promote both Th1 and Th2 immune responses induced by ovalbumin in mice

The study was conducted to investigate the promoted immune response to ovalbumin in mice by chitosan nanoparticles (CNP) and its toxicity. CNP did not cause any mortality or side effects when mice were administered subcutaneously twice with a dose of 1.5 mg at 7-day intervals. Institute of Cancer Research (ICR) mice were immunized subcutaneously with 25 μg ovalbumin (OVA) alone or with 25 μg OVA dissolved in saline containing Quil A (10 μg), chitosan (CS) (50 μg) or CNP (12.5, 50 or 200 μg) on days 1 and 15. Two weeks after the secondary immunization, serum OVA-specific antibody titers, splenocyte proliferation, natural killer (NK) cell activity, and production and mRNA expression of cytokines from splenocytes were measured. The serum OVA-specific IgG, IgG1, IgG2a, and IgG2b antibody titers and Con A-, LPS-, and OVA-induced splenocyte proliferation were significantly enhanced by CNP (P < 0.05) as compared with OVA and CS groups. CNP also significantly promoted the production of Th1 (IL-2 and IFN-γ) and Th2 (IL-10) cytokines and up-regulated the mRNA expression of IL-2, IFN-γ and IL-10 cytokines in splenocytes from the immunized mice compared with OVA and CS groups. Besides, CNP remarkably increased the killing activities of NK cells activity (P < 0.05). The results suggested that CNP had a strong potential to increase both cellular and humoral immune responses and elicited a balanced Th1/Th2 response, and that CNP may be a safe and efficacious adjuvant candidate suitable for a wide spectrum of prophylactic and therapeutic vaccines.     

Preparation of Doxorubicin-Loaded Carboxymethyl-β-Cyclodextrin/Chitosan Nanoparticles with Antioxidant,Antitumor Activities and pH-Sensitive Release

In this study, chitosan nanoparticles (HF-CD NPs) were synthesized by an ionic gelation method using negatively charged carboxymethyl-β-cyclodextrin and positively charged 2-hydroxypropyltrimethyl ammonium chloride chitosan bearing folic acid. The surface morphology of HF-CD NPs was spherical or oval, and they possessed relatively small particle size (192 ± 8 nm) and positive zeta potential (+20 ± 2 mV). Meanwhile, doxorubicin (Dox) was selected as model drug to investigate the prepared nanoparticles’ potential to serve as a drug delivery carrier. The drug loading efficiency of drug-loaded nanoparticles (HF-Dox-CD NPs) was 31.25%. In vitro release profiles showed that Dox release of nanoparticles represented a pH-sensitive sustained and controlled release characteristic. At the same time, the antioxidant activity of nanoparticles was measured, and chitosan nanoparticles possessed good antioxidant activity and could inhibit the lipid peroxidation inside the cell and avoid material infection. Notably, CCK-8 assay testified that the nanoparticles were safe drug carriers and significantly enhanced the antitumor activity of Dox. The nanoparticles possessed good antioxidant activity, pH-sensitive sustained controlled release, enhanced antitumor activity, and could be expected to serve as a drug carrier in future with broad application prospects.     

Chitosan/Alginate Nanoparticles for the Enhanced Oral Antithrombotic Activity of Clam Heparinoid from the Clam Coelomactra antiquata

Chitosan/alginate nanoparticles (DG1-NPs and DG1/Cur-NPs) aiming to enhance the oral antithrombotic activity of clam heparinoid DG1 were prepared by ionotropic pre-gelation. The influence of parameters, such as the concentration of sodium alginate (SA), chitosan (CTS), CaCl₂, clam heparinoid DG1, and curcumin (Cur), on the characteristics of the nanoparticles, were investigated. Results indicate that chitosan and alginate can be used as polymer matrices to encapsulate DG1, and nanoparticle characteristics depend on the preparation parameters. Nano-particles should be prepared using 0.6 mg/mL SA, 0.33 mg/mL CaCl₂, 0.6 mg/mL CTS, 7.2 mg/mL DG1, and 0.24 mg/mL Cur under vigorous stirring to produce DG1-NPS and DG1/Cur-NPS with small size, high encapsulation efficiency, high loading capacity, and negative zeta potential from approximately −20 to 30 mV. Data from scanning electron microscopy, Fourier-transform infrared spectrometry, and differential scanning calorimetry analyses showed no chemical reaction between DG1, Cur, and the polymers; only physical mixing. Moreover, the drug was loaded in the amorphous phase within the nanoparticle matrix. In the acute pulmonary embolism murine model, DG1-NPs enhanced the oral antithrombotic activity of DG1, but DG1/Cur-NPs did not exhibit higher antithrombotic activity than DG1-NPs. Therefore, the chitosan/alginate nanoparticles enhanced the oral antithrombotic activity of DG1, but curcumin did not further enhance this effect.     

Fabrication of Silk Scaffold Containing Simvastatin-Loaded Silk Fibroin Nanoparticles for Regenerating Bone Defects

Background:In the present study, a tissue engineered SF scaffold containing simvastatin-loaded SFNPs were used to stimulate the regeneration of the defected bone.Methods:At first, the porous SF scaffold was prepared using freeze-drying. Then simvastatin-loaded SFNPs were made by dissolvation method and embedded in the SF scaffold. Afterwards, the scaffold and the NPs were characterized in terms of physicochemical properties and the ability to release the simvastatin small molecule.Results:The results exhibited that the SF scaffold had a porous structure suitable for releasing the small molecule and inducing the proliferation and attachment of osteoblast cells. SFNPs containing simvastatin had spherical morphology and were 174 ± 4 nm in size with -24.5 zeta potential. Simvastatin was also successfully encapsulated within the SFNPs with 68% encapsulation efficiency. Moreover, the small molecule revealed a sustained release profile from the NPs during 35 days. The results obtained from the in vitro cell-based studies indicated that simvastatin-loaded SFNPs embedded in the scaffold had acceptable capacity to promote the proliferation and ALP production of osteoblast cells while inducing osteogenic matrix precipitation. Conclusion:The SF scaffold containing simvastatin-loaded SFNPs could have a good potential to be used as a bone tissue-engineered construct.     

海藻酸钠/壳聚糖基橡胶树死皮康复营养剂微胶囊的制备工艺优化

橡胶树死皮已成为制约天然橡胶生产发展的重要因子之一,研发轻简、高效的死皮防治技术是目前生产中亟需解决的问题。本文以海藻酸钠/壳聚糖为壁材,橡胶树死皮康复营养剂主要有效成分为芯材,通过复凝聚反应将橡胶树死皮康复营养剂制备成微胶囊。以微胶囊的包封率、载药量为制备工艺优化指标,通过L₁₆(4 ⁵)正交实验得出微胶囊的最佳制备工艺条件。研究结果表明,当壳聚糖浓度为2.0 mg/mL、营养剂用量为1 g,体系反应温度为40 ℃,pH为5,10%戊二醛用量为30 mL时,该工艺条件下制备的微胶囊相对圆整、粒度分布相对均匀（10~40 μm）,其包封率达69.31%、载药量达14.35%。所得的最佳工艺制备条件为后期实现木质部埋植橡胶树死皮康复营养剂缓释微胶囊打下良好基础;为最终实现新型高效的橡胶树死皮康复技术应用提供依据。     

Novel Spray Dried Glycerol 2-Phosphate Cross-Linked Chitosan Microparticulate Vaginal Delivery System—Development,Characterization and Cytotoxicity Studies

Chitosan microparticulate delivery systems containing clotrimazole were prepared by a spray drying technique using glycerol 2-phosphate as an ion cross-linker. The impact of a cross-linking ratio on microparticle characteristics was evaluated. Drug-free and drug-loaded unmodified or ion cross-linked chitosan microparticles were examined for the in vitro cytotoxicity in VK2/E6E7 human vaginal epithelial cells. The presence of glycerol 2-phosphate influenced drug loading and encapsulation efficacy in chitosan microparticles. By increasing the cross-linking ratio, the microparticles with lower diameter, moisture content and smoother surface were observed. Mucoadhesive studies displayed that all formulations possessed mucoadhesive properties. The in vitro release profile of clotrimazole was found to alter considerably by changing the glycerol 2-phosphate/chitosan ratio. Results from cytotoxicity studies showed occurrence of apoptotic cells in the presence of chitosan and ion cross-linked chitosan microparticles, followed by a loss of membrane potential suggesting that cell death might go through the mitochondrial apoptotic pathway.     

不同品种甘蔗生长对氮肥的响应与利用

本文以研究区当家甘蔗品种台糖22(ROC22)、柳城5136(LC5136)、粤糖236(YT236)为材料,设5个不同氮肥施用量,研究施氮量对不同品种甘蔗生长及氮肥利用的影响。结果表明:(1)施氮量增加,3种甘蔗的茎重和产量先增加后无显著变化。ROC22和LC5136在施氮量为351.9 kg/hm2时较为适宜,而YT236在234.6 kg/hm2时较适宜;ROC22的产量最高,分别比LC5136和YT236增产8.6%和40%。(2)随施氮量的提高,LC5136和YT236的产糖量呈先增加后无明显变化的趋势。ROC22的产糖量在施氮量为351.9kg/hm2时显著大于无氮处理的,但不同施肥量处理间无显著差异;ROC22的平均产糖量分别比LC5136和YT236高20%和57%。(3)随着施氮量的增加,ROC22和YT236的氮肥利用率呈递减趋势,施氮量为117.3kg/hm2时利用率最高。而LC5136的肥料利用率呈递增趋势,施氮量为469.2 kg/hm2时利用率最高;ROC22的氮肥利用率比LC5136和YT236的均高出10个百分点。综合考虑甘蔗产量、产糖量、氮肥利用率的情况,氮肥用量为351.9kg/hm2时,对ROC22和LC5136较适宜,而在234.6kg/hm2时,对YT236较适宜。在研究区种植甘蔗ROC22明显优于LC5136和YT236。     

Preparation and BSA Adsorption Behavior of Chitosan-arginine Based Nanofiber Membranes

In this work, an affinity nanofiber membrane was successfully prepared by solution blowing of arginine-modified chitosan (CS-Arg) for bovine serum albumin (BSA) adsorption. CS-Arg was firstly synthesized by coupling L-arginine onto chitosan backbone. Then, CS-Arg nanofiber membranes (CANFs) were fabricated using solution blowing process with Polylactide (PLA) as assistant polymer. The results showed that CANFs effectively adsorbed BSA, and the adsorption capacities were influenced by the degrees of substitution (DS) of arginine in CS, pH value, contact time, and initial protein concentration. The highest adsorption capacity of 445.19 mg/g was achieved uvnder the following conditions: DS of 43.7 %, pH of 7.14, and initial concentration of 3.0 mg/ml. BSA adsorbed on the CANFs membrane conformed to Langmuir model, and the adsorption rate was consistent with the second-order kinetics model. This work implies that an arginine-modified chitosan nanofiber-based novel biomaterial has a potential application in adsorption of BSA.     

Evaluation of penetration of nanocarriers into red pepper leaf using confocal laser scanning microscopy

Penetration of nanocarriers into red pepper leaf was evaluated with the aim of identifying a novel way to enhance the efficacy of applied pesticides on the field. In addition, the effect of surface charge of the nanocarriers on penetration was also studied. Particularly, corn oil-nanoemulsions (NE) and chitosan coated NE (CH-NE) were successfully prepared with a high encapsulation efficiency, a high payload, a very small size, a small polydispersity index, and a high zeta potential. However, after being coated with chitosan, the zeta potential of NE changed from a negative charge to a positive charge. Penetration experiments were also carried out using a Franz diffusion cell followed by visualization using confocal laser scanning microscopy. The images of the vertical sections illustrated that penetration of nanocarriers (NE and CH-NE) into the red pepper leaf occurred very quickly. Nanocarriers fully penetrated the whole leaf after 60 min. Moreover, multi-depth images that paralleled the leaf surface (horizontal visualization) together with removal of plant-autofluorescent emissions and three-dimensional graphs describing the penetration of NE and CH-NE demonstrated that the negatively charged nanocarriers (NE) had a higher penetration rate compared to that of the positively charged nanocarriers (CH-NE).     

大豆底荚高度QTL定位及候选基因挖掘

底荚高度是衡量大豆品种是否适宜机械收获的关键指标。底荚高度较低的品种在机械收割过程中可能造成植株部分被切断或漏割,引起总产量损失。因此,大豆底荚高度候选基因对大豆机械化育种至关重要。本研究利用完备区间作图法(Inclusive Composite Interval Mapping, ICIM)对208染色体片段代换系群体(chromosome segment substitution lines, CSSL)进行大豆底荚高度QTL定位,获得9个与大豆底荚高度相关的QTL,分布在8条连锁群上。结合BSA重测序结果,将与大豆底荚高度相关的QTL定位到C1连锁群上1.1Mb和L连锁群上0.05Mb的区间内,并对其进行基因注释。通过基因注释数据库和信息学分析,在两个共识QTL区间内获得5个可能与大豆底荚高度相关的候选基因。这些结果可以为大豆底荚高度QTL精细定位以及机械化优质高产大豆品种的选育提供理论依据。     

Chitosan-filled polypropylene composites: The effect of filler loading and organosolv lignin on mechanical,morphological and thermal properties

In this work, the effect of organosolv lignin on properties of polypropylene (PP)/chitosan composites was investigated. Mechanical and thermal properties of the composites were analyzed by means of ASTM D 638-91, ASTM D 256, thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC). Tensile strength and elongation at break of the PP composites decreased upon the presence of chitosan filler, but Young’s modulus improved. Impact strength was found to increase with the maximum value at 30 php of filler loading. At a similar loading, treated PP/chitosan composites were found to have higher tensile strength, elongation at break, Young’s modulus as well as impact strength than untreated composites. Furthermore, the presence of organosolv lignin imparted a plasticizing effect. Thermal properties of the treated PP/chitosan composites were better as compared with the untreated PP/chitosan composites; although the chemical treatment did not alter the thermal degradation mechanism. In addition, the obtained results were comparable to results from previous studies. This finding implied that the organosolv lignin could be a potential reagent to replace its synthetic counterpart.     

甘蓝型油菜分枝角度QTL定位及候选基因分析

分枝角度是油菜重要株型性状.为筛选和发现适度紧凑的分枝角度调控基因,以提高产量利于机械化收获,以分枝角度差异显著的油菜品种Holly和APL01为亲本构建的重组自交系(RIL)群体为材料,在2个环境中对分枝角度进行QTL定位及候选基因分析.结果表明,RIL群体分枝角度表现出连续变异且呈正态分布.利用前期构建的高密度SN...     

Preparation and Characterization of Antioxidant Nanoparticles Composed of Chitosan and Fucoidan for Antibiotics Delivery

In this study, we developed novel chitosan/fucoidan nanoparticles (CS/F NPs) using a simple polyelectrolyte self-assembly method and evaluated their potential to be antioxidant carriers. As the CS/F weight ratio was 5/1, the CS/F NPs were spherical and exhibited diameters of approximately 230–250 nm, as demonstrated by TEM. These CS/F NPs maintained compactness and stability for 25 day in phosphate-buffered saline (pH 6.0–7.4). The CS/F NPs exhibited highly potent antioxidant effects by scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH), reducing the concentration of intracellular reactive oxygen species (ROS) and superoxide anion (O₂⁻) in stimulated macrophages. The DPPH scavenging effect of CS/F NPs primarily derives from fucoidan. Furthermore, these CS/F NPs activated no host immune cells into inflammation-mediated cytotoxic conditions induced by IL-6 production and NO generation. The MTT cell viability assay revealed an absence of toxicity in A549 cells after exposure to the formulations containing 0.375 mg NPs/mL to 3 mg NPs/mL. Gentamicin (GM), an antibiotic, was used as a model drug for an in vitro releasing test. The CS/F NPs controlled the release of GM for up to 72 h, with 99% of release. The antioxidant CS/F NPs prepared in this study could thus be effective in delivering antibiotics to the lungs, particularly for airway inflammatory diseases.     

Chitin and Chitosan as Multipurpose Natural Polymers for Groundwater Arsenic Removal and As2O3 Delivery in Tumor Therapy

Chitin and chitosan are natural polysaccharide polymers. These polymers have been used in several agricultural, food protection and nutraceutical applications. Moreover, chitin and chitosan have been also used in biomedical and biotechnological applications as drug delivery systems or in pharmaceutical formulations. So far, there are only few studies dealing with arsenic (As) removal from groundwater using chitin or chitosan and no evidence of the use of these natural polymers for arsenic trioxide (As₂O₃) delivery in tumor therapy. Here we suggest that chitin and/or chitosan might have the right properties to be employed as efficient polymers for such applications. Besides, nanotechnology offers suitable tools for the fabrication of novel nanostructured materials of natural origin. Since different nanostructured materials have already been employed successfully in various multidisciplinary fields, we expect that the integration of nanotechnology and natural polymer chemistry will further lead to innovative applications for environment and medicine.     

Functionalization of the aquatic weed water hyacinth <Emphasis Type="Italic">Eichhornia crassipes</Emphasis> by using zinc oxide nanoparticles for removal of organic dyes effluent

In this study, purified Eichhornia crassipes dead biomass, coated biomass with ZnO nanoparticles (NPs) and one coated with both ZnO NPs and polyethylenimine (PEI) were successfully fabricated as a bioadsorbent and biodegradent of organic dyes from the textile dye effluent. These ZnO NPs are capable of enhancing the dispersability and adsorption capacity of PEI and the anionic dyes. The surface analyses of Eichhornia crassipes, Eichhornia crassipes/ZnO NPs and Eichhornia crassipes/ZnO NPs/ PEI were characterized by SEM, specific surface area and micropore volume. The effect of three parameters including Eichhornia crassipes concentration, dye concentration and contact time on the color removal percent and degradation percent were evaluated. The results showed that the bleached Eichhornia crassipes was an efficient adsorbent for cationic dyes. Also, the effectiveness of Eichhornia crassipes/ZnO NPs was employed as photocatalytic agent for the degradation of C.I. Direct Red 23 in the presence and absence of UV irradiation. Moreover, Eichhornia crassipes/ZnO NPs/PEI shows a high adsorption capacity toward the anionic dyes C.I. Acid Red 40 and C.I. Reactive Orange 91. It was found that, Eichhornia crassipes/ZnO NPs was completely degraded C.I. Direct Red 23 by >90 % within 90 min of UV irradiation time, whereas in the absence of UV irradiation it required a substantially longer time (120 min) to achieve a similar degradation percent. In addition, Eichhornia crassipes/ZnO NPs/PEI was most effective and show the maximum adsorption capacity for C.I. Reactive Orange 91 and C.I. Acid Red 40 and its efficiency for the color removal percent was 100 % for C.I. Reactive Orange 91 and 95 % for C.I. Acid Red 40 in less than 60 min processing time.     

Mucoadhesive Microparticles for Gastroretentive Delivery: Preparation,Biodistribution and Targeting Evaluation

The aim of this research was to prepare and characterize alginate-chitosan mucoadhesive microparticles containing puerarin. The microparticles were prepared by an emulsification-internal gelatin method using a combination of chitosan and Ca²⁺ as cationic components and alginate as anions. Surface morphology, particle size, drug loading, encapsulation efficiency and swelling ratio, in vitro drug released, in vitro evaluation of mucoadhesiveness and Fluorescence imaging of the gastrointestinal tract were determined. After optimization of the formulation, the encapsulation efficiency was dramatically increased from 70.3% to 99.2%, and a highly swelling ratio was achieved with a change in particle size from 50.3 ± 11.2 μm to 124.7 ± 25.6 μm. In ethanol induced gastric ulcers, administration of puerarin mucoadhesive microparticles at doses of 150 mg/kg, 300 mg/kg, 450 mg/kg and 600 mg/kg body weight prior to ethanol ingestion significantly protected the stomach ulceration. Consequently, significant changes were observed in inflammatory cytokines, such as prostaglandin E₂ (PGE₂), tumor necrosis factor (TNF-α), interleukin 6 (IL-6), and interleukin1β (IL-1β), in stomach tissues compared with the ethanol control group. In conclusion, core-shell type pH-sensitive mucoadhesive microparticles loaded with puerarin could enhance puerarin bioavailability and have the potential to alleviate ethanol-mediated gastric ulcers.     

The Application of Mucoadhesive Chitosan Nanoparticles in Nasal Drug Delivery

Mucosal delivery of antigens can induce both humoral and cellular immune responses. Particularly, the nasal cavity is a strongly inductive site for mucosal immunity among several administration routes, as it is generally the first point of contact for inhaled antigens. However, the delivery of antigens to the nasal cavity has some disadvantages such as rapid clearance and disposition of inhaled materials. For these reasons, remarkable efforts have been made to develop antigen delivery systems which suit the nasal route. The use of nanoparticles as delivery vehicles enables protection of the antigen from degradation and sustains the release of the loaded antigen, eventually resulting in improved vaccine and/or drug efficacy. Chitosan, which exhibits low toxicity, biodegradability, good cost performance, and strong mucoadhesive properties, is a useful material for nanoparticles. The present review provides an overview of the mucosal immune response induced by nanoparticles, recent advances in the use of nanoparticles, and nasal delivery systems with chitosan nanoparticles.