Diminished vessel diameter as a possible factor in the decline of European ash (Fraxinus excelsior L.)

? The aim of this work was to examine the anatomy and functioning of secondary xylem in stems in relation to the decline of European ash (Fraxinus excelsior L.).

? We tested the hypothesis that declining trees show changes in the structure of wood, which result in impaired water transport.

? Anatomical analyses were carried out on wood samples (comprising all annual rings formed during the 30 years life of the analysed trees) collected at breast height from the main stem of healthy, weakened and dead ash trees. The width of annual wood increments, the diameter and density of earlywood vessels were measured and the theoretical hydraulic conductivity index through the secondary xylem calculated by application of Hagen-Poisseuille’s formula.

? Anatomical characteristics changed both with the age of trees and in response to unfavorable factors. The largest vessels were observed in healthy trees, which implied that they had the highest hydraulic conductivity index, whereas trees considered to be in decline produce smaller vessels and hence had reduced conductivity.

     

Variation in the pith parameter of Gmelina arborea trees from fast growth plantations in Costa Rica

? The pith represents the central part of the cross-section of a tree trunk and it is composed of primary parenchyma tissue. And its eccentricity is associated with the presence of reaction wood, which affects trunk straightness, and diminishes the quality of the logs and products.

? Gmelina arborea trees (8 to 14 years old) from fast growth plantations in Costa Rica were sampled with the purpose of determining diameter, eccentricity and pith percentage as well as pith distance from the real centre of the cross section. These pith parameters were also evaluated in relation to management intensity (intensive, moderate and unmanaged), climate (dry and wet tropical) and tree height.

? Pith diameter varies from 0.15 to 1.10 cm and is located at 6 cm, at its maximum, around the real centre of the cross section. Percentage eccentricity might reach values of up to 26.5% and this parenchyma tissue represents between 1 and 5% of the total tree diameter.

? The level of management had a significant effect on the eccentricity and percentage of the pith, while the climate significantly affected the pith percentage and the distance of pith from the real centre of the cross section. Tree height affected significantly all the parameters evaluated.

     

High resolution temporal variation in wood properties in irrigated and nonirrigated Eucalyptus globulus

? Environmental determinants of wood properties variation were examined in Eucalyptus globulus, a globally important hardwood plantation species, in southern Tasmania, Australia.

? Radial variation in wood properties, measured with the SilviScan system, were re-scaled from distance to time abscissa using stem radial growth data measured with dendrometers. With this re-scaled data it was possible to evaluate how water availability and temperature affected wood density, microfibril angle (MFA) and fibre and vessel transverse dimensions in irrigated and non-irrigated trees.

? Wood density, fibre radial diameter and MFA were sensitive to water availability. Wood density increased and fibre radial diameter decreased in response to reduced water availability. When high water availability was maintained, wood density was negatively correlated with temperature. Together, temperature and soil matric potential explained about 60% of temporal variation in wood density variation. In contrast MFA was not related to temperature but decreased with increasing water stress. Slower growing trees also had lower MFA than faster growing trees. Slower growing trees had a larger number of vessels per unit area of wood than faster growing trees within this even aged stand. However, vessel radius to the 4th power was significantly higher in faster growing trees than in slower growing trees.

? Overall, E. globulus wood properties were sensitive to temporal changes in environmental conditions (particularly water availability) and associated growth rates. The data provided support for the hypothesis that growth rates are hydraulically mediated.

     

Variation in the natural termite resistance of teak (Tectona grandis Linn. fil.) wood as a function of tree age

? Tree age is one of the most important factors to affect the natural durability of wood.

? The purpose of this study was to determine the natural termite resistance of heartwood and sapwood of teak (Tectona grandis Linn. fil.) for trees aged 8, 30 and 51 years. Reticulitermes speratus Kolbe was employed as a test termite using a no-choice feeding method.

? The heartwood and sapwood of all of the trees tested exhibited antitermitic activity. Based on the mean mass loss due to termite activity, the sapwood and heartwood regions of 8-year-old trees are the most susceptible to termites while the heartwood regions of the 30-year-old trees showed termite resistance similar to the termite resistance of 51-year-old trees.

? The mass loss is moderately correlated with n-hexane extractive content, total extractive content, brightness and redness of the wood.

     

Physical properties of wood in thinned Scots pines (Pinus sylvestris L.) from plantations in northern Spain

? The physical properties of wood and the associated variations within and between trees were evaluated by analysing 770 small specimens of clear wood from 11 Pinus sylvestris L. trees thinned from 3 plantations.

? Within-tree variations in basic density or volumetric shrinkage increased with cambial age and decreased with increasing ring width. The effect of the height in the stem on wood properties was considered indirect and height was not included as an explanatory variable in the mixed models proposed to estimate basic density and volumetric shrinkage.

? The models had random components for the intercept parameter and explained 52.5% of the total variance in basic density and 56% of the total variance in volumetric shrinkage. Linear shrinkage in the direction of the grain was extremely variable.

? Between-tree variation and between-plot variation in the physical properties of wood were high, considering that all trees sampled were growing in similar sites and stands. It would then be desirable to predict physical properties of wood on living trees in order to use the quality of wood as a criterion for timber tree selection in thinnings.

     

Wood colour variation in sapwood and heartwood of young trees of Tectona grandis and its relationship with plantation characteristics, site, and decay resistance

? Wood colour of Tectona grandis produced from fast-growth plantations is highly variable and the causes of this variation are relatively unknown.

? With the purpose of understanding the colour variation, different fast-growth plantations were sampled with different growth rates, tree ages, and sites.

? Wood colour was measured with a CIELab system, where three variables are estimated: coordinate L* for lightness, coordinate a* defines redness and coordinate b* defines yellowness.

? Results showed only a negative correlation between L* and a*. L* and a* were negatively and positively respectively correlated with pith distance in heartwood, but not for b*. No correlations were found between L* and b* in sapwood and plantation characteristics, while a* was positively correlated with age and height of tree and growth rate. In heartwood, tree age and diameter at breast height were correlated with all colour parameters, but tree height and plantation density were correlated with a* and b*. Cluster site had correlation with L*. Multiple correlation analysis showed that the heartwood is increasing darker (L*) and redder (a*) when the trees are older and bigger. Correlation coefficient shown that sapwood and heartwood with lighter colour (L*) is less resistance to fungal attack, but redness colour (a*) increasing decay resistance.

     

Genetic parameters for grain angle in 28-year-old Norway spruce progeny trials and their parent seed orchard

? Sawn wood which acquires twist during drying is a substantial problem for the sawmill industry and is to a large extent caused by spiralled grain in the tree.

? In this study, the feasibility of using spiral grain angles as a selection trait in Norway spruce (Picea abies (L.) Karst) tree breeding and the extent of grain angle and its breeding values were investigated. Grain angles under bark and diameter were measured at breast height in three 28-year-old Norway spruce progeny trials and in their parent seed orchard.

? The mean grain angle value was 1.76° in the progeny trials and 1.84° in the seed orchard. Estimated genetic standard deviations for grain angle were almost 1°. Progeny trial heritabilities (H ² > 0.3) were larger than the seed orchard heritability (H ² = 0.24). Genotype by environment interaction among the progeny trials was negligible for grain angle. Progeny trial grain angles exhibited genetic correlation with seed orchard grain angles in the range 0.66 to 0.84.

? Thus, mature wood grain angles are also under considerable genetic control, raising the opportunity to reduce the occurence of left-grained trees, which are prone to producing twisted wood.

     

Comparison of methods to quantify loss of hydraulic conductivity in Norway spruce

? Percent loss of hydraulic conductivity (PLC) is an important measure in plant water relations, but the available methods differ and results have rarely been compared.

? We compared PLC measured in Norway spruce (Picea abies) by quantifying conductivity before and after removing emboli, either by flushing with high water pressure or by infiltration under a partial vacuum, with relative water loss and staining conductive xylem to test advantages and possible problems of commonly applied methods.

? Infiltration removed nearly all gas from sections of drought-stressed and unstressed twigs, and flushing and infiltration efficiently removed emboli. Infiltration appears less prone to producing clogged xylem elements than high pressure flushing. Relative water loss (RWL) and the proportion of xylem stained with phloxine B (PSX) was also highly correlated with PLC, the latter can be quantified by image analysis, and also shows the pattern of xylem dysfunction. Loss of conductivity was more common in the inner annual rings, in early wood within an annual ring, and in compression wood, though pattern differed substantially between branches.

? Advantages and potential problems of these methods are discussed and it is suggested that RWL or PSX may be used as proxy measures for PLC in species when the correlations have been established.

     

Cellulose content as a selection trait in breeding for kraft pulp yield in Eucalyptus urophylla

? The aim of this study was to investigate the effectiveness of using cellulose content, measured by the diglyme-HCl method, as a selection trait in breeding programs for kraft pulp yield in Eucalyptus urophylla.

? A total of 275 trees from sixty-two families were sampled from a thinned progeny trial of E. urophylla in northern Vietnam to evaluate cellulose content from breast-height increment cores. Among those, twenty unrelated trees were felled to evaluate cellulose content and pulp yield from breast-height disk samples.

? The regression of pulp yield of disk samples on cellulose content was strong either from disks (R ² = 0.83) or increment cores (R ² = 0.69). There was no significant difference in cellulose content between the provenances. The narrow-sense within-provenance heritability of cellulose content was 0.50 and the coefficient of additive genetic variation was 3.9%. Genetic correlations between cellulose content and growth (0.28–0.45) or wood basic density (?0.02) were not significantly different from zero.

? Breast-height increment core cellulose content measured by diglyme-HCl method is under strong genetic control and can be used to rank trees for pulp yield in E. urophylla plantations. Selection for increased cellulose content would have only minor effects on growth and wood basic density.

     

Variation in the decay resistance of larch to fungi

? Decay resistance of larch (Larix sp.) to fungi was evaluated on heartwood samples belonging to 3 species (L. decidua, L. kaempferi and their hybrid), 3 races of European larch (polonica, sudetica and alpine), 13 wood lots (populations) and 313 trees.

? Larch wood appeared, on average, as moderately durable although a high variability was observed. At the sample level as well as at the mean individual tree level, durability ranged from class 1 to 5 according to EN 350-1 standard. At the population level, larch wood varied from ‘durable’ to ‘slightly durable’. Genetics played a major role in decay resistance at the species, provenance and tree levels. Environmental factors such as the position of heartwood samples and the age of trees were also identified as a source of variability.

? The most durable wood was not necessarily from old native alpine stands of European larch: some young larches from faster growing lowland origins also produced durable wood.

? Genetic improvement of larch wood durability appeared therefore likely by the selection of the best populations for decay resistance as well as from the selection of individuals.

     

Xylogenesis of Pinus pinaster under a Mediterranean climate

Context

The knowledge on cambial activity in water-limited environments, such as the Mediterranean, is still fragmentary. Dendrochronological studies have determined that spring precipitation plays an important part in determining tree-ring width and the properties of tracheids. However, the complex relation between cambial phenology and climate is still far from understood.

Aims

We studied the influence of climate, especially water stress, on maritime pine wood formation with the aim of determining the influence of drought on cambial activity.

Methods

A plantation of maritime pine (Pinus pinaster) was selected in the west coast of Portugal, to monitor cambial activity and wood formation using anatomical observations and band dendrometers. The trees were monitored weekly over 2 years (2010 and 2011).

Results

Xylem differentiation started earlier when warmer late winter temperatures were observed. Water stress triggered an earlier stop of wood formation and also the formation of tracheids with smaller lumen area. In both years a bimodal pattern of stem radial increment was registered by band dendrometers with two periods of increment: one in spring and another in autumn. The xylem anatomy study suggests that the autumnal increment period corresponded mostly to stem rehydration, since the differentiation of new xylem cells by the cambium was not observed.

Conclusion

Maritime pine cambial activity appears to be under a double climatic control: temperature influences cambial onset and water availability growth cessation.     

Ranking larch genotypes with the Rigidimeter: relationships between modulus of elasticity of standing trees and of sawn timber

? Direct assessment of modulus of elasticity (MOE) on standing trees is attractive for breeders to evaluate genotypes prior to selection: this can be done using the Rigidimeter, a bending-based measurement device.

? In this study, we tested its reliability to properly rank genotypes by relating trunk MOE with MOEs estimated with a vibrating analysis system (Bing) on different types of conditioned wood specimens from the same trees (boards and standardised 2×2×30 cm-clear-wood specimens). One hundred and ten trees from different genotypes of hybrid larch (Larix × eurolepis) were tested.

? Mean trunk MOE was 7 300 MPa with a similar value obtained for sawn boards. Clear-wood specimens MOE increased from pith to bark from less than 6 000 MPa to nearly 9 000 MPa. Moderate correlations (r = 0.48–0.61) were found at the individual tree level between trunk MOE and MOE of wood samples.

? Single specimen MOE was shown to be strongly related to a linear combination of trunk MOE and sample position.

? At the genotype mean level, trunk MOE was highly correlated with wood samples MOE (r = 0.80–0.91). Ranking of genotypes based on trunk MOE was mostly consistent with that based on standardised specimens.

? It was concluded that besides other operational advantages which are discussed, the Rigidimeter is a valuable tool for breeders to routinely evaluate and rank genotypes for stiffness prior to further selection.

     

Genetic variation in wood density and correlations with tree growth in Prosopis africana from Burkina Faso and Niger

? Variation in wood basic density and its correlation with tree growth were investigated at 13 years in a provenance/progeny test of Prosopis africana in Niger. The test included progeny from 256 trees sampled from 24 provenances in the Sahelian ecozone of Burkina Faso and Niger.

? Variation in wood density was significant due to provenances and families within provenances. Individual tree heritability was higher for wood density than for growth traits. Provenance means for wood density increased from the more humid to the drier parts of the sample region. Phenotypic correlations indicated that larger trees tended to have denser wood.

? Clines suggest that natural populations of P. africana from the drier parts of the sample region have the genetic capacity to produce denser wood, compared with populations from the more humid parts of the region. Correlations and heritability estimates suggest that selection of faster-growing trees may produce a small gain in wood volume but little (if any) gain in density in the subsequent generation. Multi-location provenance/tests are needed to confirm this tentative conclusion.

     

Effects of site on fibre, kraft pulp and handsheet properties of Eucalyptus globulus

? Eight-year old trees from two Eucalyptus globulus Labill. clones planted across three different sites in Tasmania, Australia, were sampled for wood and kraft pulp/handsheet properties.

? Site had a significant effect on all measured properties. Compared with the poor site (Parkham) the wood from the good site (West Ridgley) had on average 11 % lower wood density. The poor site had also greater microfibril angles, shorter fibres at lower pulp yields.

? The handsheets produced with pulp from the poor site resulted in comparatively higher bulkiness, lower burst, lower tear and tensile indices, lower zero span tensile strength, but higher opacity, higher light scattering and higher surface roughness. Significant height effects were found with all wood properties, and also with tear index, zero span tensile strength and opacity.

? Discriminant analysis showed that for 76 out of 100 handsheets the raw material source, i.e. growth site, could be predicted correctly using a set of handsheet properties with tear index and bulk index being most prominent.

? This is unique evidence that site conditions are strongly reflected in handsheet properties produced from Eucalyptus pulp.

     

Effects of genetic entry and competition by neighbouring trees on growth and wood properties of cloned Norway spruce (Picea abies)

? The aim of this work was to study both the effects of genetic entry and competition by neighbouring trees on growth, yield, wood density traits and fibre properties of 20 Norway spruce clones grown in an experimental trial located in southern Finland. The material included 10 Finnish clones, 2 Russian clones and 8 provenance-hybrids clones, the latter ones representing crosses between Finnish and foreign parent trees.

? We found that, compared to growth and yield, wood density traits and fibre properties showed, on average, lower phenotypic variations. Moreover, significant differences could be observed among the clones regardless of the trait (p < 0.05). Conversely, on average, no clear differences could be found between Finnish, Russian and provenance-hybrids clones in most of the studied traits.

? The marked differences among the clones, and lack of clear differences among the provenances suggested that any ranking, regarding different traits, should be based on individual clones. The phenotypic correlations between different traits ranged from moderate to strong suggesting that selection based on one trait would affect other traits. Regardless of clone, the growth of trees (e.g. breast height diameter) decreased and the wood density increased with increasing competition by neighbouring trees, which was expressed by competition index.

     

The potential of plantations of Terminalia superba Engl. & Diels for wood and biomass production (Mayombe Forest, Democratic Republic of Congo)

? In the 1940s–1950s, large limba (Terminalia superba Engl. & Diels) plantations were established in the Democratic Republic of Congo to reduce the pressure on the natural forests.

? The objective of this study was to evaluate the potential of these long-rotation plantations as production forests (timber) and carbon sinks.

? Five different plantations, between 50 and 58 years old, were sampled. Over a sample surface of more than 73 ha, the diameter above buttresses of 2 680 trees, bole height of 265 trees and tree height of 128 trees was measured.

? To estimate the commercial volume, a nonlinear power law regression was used (R ² = 0.95). A power law variance function was applied to counter heteroscedasticity of the residual plot. Estimates of commercial tree and stand volume at 50 to 58 y were 5.6 ± 4.1 m³ and 183.9 ± 135.0 m³ ha^?1. Stand volumes appear low but are explained by a large decrease in tree density. However, the mean volume increment of 3.2–3.7 m³ ha^?1 y^?1 corresponds well with teak plantations of a similar age. For limba, aboveground biomass and carbon estimates of this study (resp. 108.4 and 54.2 Mg ha^?1) differ significantly from those of existing aboveground biomass models (resp. 135.7–143.9 Mg ha^?1 biomass and 67.9–72.0 Mg ha^?1 C). All aboveground biomass and carbon estimates for T. superba stands were lower than for the estimates of young fast-growing plantations like Tectona grandis L. f., Eucalyptus spp. and Acacia spp. (≤ 30 y).

     

Towards standardised crown condition assessment in poplar plantations

? This work aims at developing new tools for rapid assessment of forest health indicators in poplar plantations.

? Crown transparency and discoloration were visually evaluated in all trees of four 15 m-radius sub-plots in 32 poplar clonal plantations, which were chosen according to a factorial scheme with three factors: tree age, site quality and understorey vegetation management. A subset of trees was assessed using digital photos processed with a semi-automatic image analysis system (the CROCO software) in order to compare visual and digital crown transparency estimates.

? Poplar crown conditions were better in young stands and rich sites. Harrowing understorey vegetation improved tree health in poor sites. Samples of 20 trees per stand provided the same information about crown transparency and discoloration as 60 trees. Calibration curves of digital crown transparency estimates were successfully fitted against visual crown transparency estimates. The same effects of stand age and site quality could be detected with digital crown transparency as response variable.

? The use of digital photos processed with CROCO in ca. twenty trees per stand is therefore recommended to accurately and objectively monitor crown condition in clonal poplar plantations.

     

Relationships of climate and cell features in stems and roots of black spruce and balsam fir

? The anatomical differences of mature black spruces and balsam firs were examined at stem and root level in order to characterize their wood properties at cellular level and link these differences to climate.

? Anatomical variability of these species was evaluated in relation to climate data gathered from 2001 to 2004 during the cell enlargement (CE) and wall thickening and lignification (WTL) phases. Lumen area, single cell wall thickness and total tracheid radial diameter were analyzed and regrouped into earlywood and latewood.

? Results from a principal component analysis (PCA) indicated that both first eigenvectors account for 82% and 90% of total variance for CE and WTL respectively. These component factors revealed that precipitation, humidity and number of days with precipitation significantly influence the lumen area (p = 0.0168) and radial cell diameter (p = 0.0222) in earlywood. Significant differences were registered between species and tree parts (stem and root) for the lumen area, radial cell diameter and cell wall thickness in both earlywood and latewood.

? In our study, black spruce exhibited smaller tracheid size in both stem and roots compared to balsam fir. Furthermore, the lower amount of tracheids produced during the growing season and higher proportion of latewood ensure a higher wood density of black spruce. The influence of temperature on earlywood formation is significant, whereas no influence was observed on latewood.

     

Genetic similarity of natural populations and plantations of Pinus roxburghii Sarg. in Nepal

? Genetic structures of five population pairs each consisting of one natural population and one neighbouring plantation of Pinus roxburghii Sarg. in Nepal were assessed using nuclear (nSSRs) and chloroplast microsatellite loci (cpSSRs).

? The mean number of alleles at nSSRs loci in natural populations was 5.0 compared to 4.93 in plantations while the average observed heterozygosities were the same in both groups (H ₀ = 0.50). Most of the alleles were common to all the populations, indicating that the populations correspond to a single genetic entity. Similarly forty-seven haplotypes were observed in natural populations compared to fifty haplotypes in plantations. Mean haplotype diversities of natural populations (0.953) and plantations (0.955) were very similar. Genetic diversity of Pinus roxburghii was relatively high with low or no evidence of inbreeding while genetic differentiation among all populations was very low (about 1%).

? The very low differentiation among natural populations indicates efficient long-distance gene flow among populations resulting in homogeneous genetic structures at least at selectively neutral loci. Even though the harvest and production of seeds and seedlings was largely uncontrolled, genetic structures of most plantations show no signs of reduced variation, inbreeding or other negative effects compromising the adaptedness or adaptability of planted forests.

     

Potential indicators of soil quality in temperate forest ecosystems: a case study in the Basque Country

? Assessment of forest sustainability requires reliable soil quality indicators. The present study evaluated the use of several potential such indicators in forests in the Basque Country under different types of management, involving: (i) species change and (ii) heavily mechanised forest operations.

? Five adjacent forest stands were selected for study: (i) two unmanaged forests (Quercus robur, Fagus sylvatica) and one (40-year-old) Pinus radiata plantation, to investigate the effect of species change; and (ii) a chronosequence of mechanised radiata pine plantations (3 and 16 years old), to investigate heavy mechanisation.

? Several physical, chemical and biological parameters were analysed in the mineral soil. Species change could not be assessed with chemical parameters, but parameters related to organic matter indicated the disturbance caused by heavy mechanisation. The Least Limiting Water Range was a good indicator of soil physical degradation induced by heavy mechanisation. Biological parameters proved sensitive indicators: (i) the fungal phospholipid fatty acid biomarker 18:2ω6 for species change; and (ii) the ratio of Gram-positive/Gram-negative bacteria for heavy mechanisation. Nevertheless, these parameters are complementary, and monitoring programmes should include physical, chemical and biological parameters.

? Further studies are required to assess natural boundaries of variation in soil quality indicators, and their resistance and resilience.