Genetic parameters for growth traits and stem-straightness in <Emphasis Type="Italic">Eucalyptus urophylla</Emphasis> × <Emphasis Type="Italic">E. camaldulensis</Emphasis> hybrids from a reciprocal mating design

An inter-specific hybrid breeding program involving Eucalyptus urophylla (U) and Eucalyptus camaldulensis (C) was implemented in order to provide genotypes better adapted to southern China with improved growth rate, stem-straightness and wind-resistance. A trial involving 36 reciprocal crosses from six parents each of C and U that had been preselected for superior growth and stem-straightness was established at a site in Luokeng in Guangdong province. Ten, pure-species families using the hybrid parents as open-pollinated female parents were included as controls. Survival and growth traits at ages 2 and 8.3 years and stem-straightness at age 2 years were assessed. Inter-specific hybrids generally performed better than the pure species in terms of survival, growth traits and stem-straightness. Female U by male C crosses generally outperformed those involving male U and female C. Further indication of the significant reciprocal effect was supported by negative and low correlations between paired groups of full-sibs that differed only in the direction of the cross. Components of female additive genetic variance and narrow-sense heritability calculated from this estimate (\(\sigma_{\rm Af}^{2}\) and \(h_{\rm f}^{2}\)), respectively) were generally higher than those of the male \(\left( {\sigma_{\rm Am,}^{2} h_{\rm m}^{2} } \right)\), providing evidence for maternal effects. The narrow-sense heritability (h²) estimates based on general hybridizing ability for growth traits and stem-straightness were generally low at both ages, and of low precision at 8.3 years. The ratio of hybrid additive-to-dominance variance \(\left( {{{\sigma_{\rm A}^{2} } \mathord{\left/ {\vphantom {{\sigma_{\rm A}^{2} } {\sigma_{\rm D}^{2} }}} \right. \kern-0pt} {\sigma_{\rm D}^{2} }}} \right)\) was of little practical consequence at age 2 years and had further decreased by age 8.3 years. Trait-trait genetic correlations amongst hybrids were generally positive and moderate to high. Hybrid vigour, gauged by comparison with the performance of the pure species progeny was significant, though correlations between pure species and hybrid progeny-based estimates of parental performance were weak, indicating that making parental selections in pure species trials may not be a successful strategy.     

Are tree breeders properly predicting genetic gain? A case study involving <Emphasis Type="Italic">Corymbia</Emphasis> species

The estimation of quantitative genetic parameters in breeding programs is important to ensure efficient selection. In this context, knowledge of the mating system is critical, as it underpins assumptions about inter-relatedness on which variance component estimation depends. However, proper account of the breeding system is not always taken, either because it is unknown and/or because it is ignored. That eucalypts have a mixed-mating system is well-established, however many breeders use models that assume outcrossed mating with an infinite number of male parents (i.e. allogamous mating), from which genetic parameter estimates are then used to predict genetic gains. First-generation, open-pollinated progeny tests of Corymbia citriodora subsp. citriodora and C. citriodora subsp. variegata, being managed for seed production, were used to investigate the likely bias, resulting in overestimation of genetic parameters under the assumption of allogamous mating. When we assumed allogamous mating, we observed inflated predictions of additive variance and narrow-sense heritability (\(\hat{h}_{a}^{2}\)) of diameter at breast height and height. The overestimate of \(\hat{h}_{a}^{2}\) was approximately 32% for C. citriodora subsp. citriodora and 21% for C. citriodora subsp. variegata. Inappropriate modelling of relatedness in eucalypts that assumes panmictic outcrossing when in fact these species have a mixed-mating system results in overestimates of the population genetic gain with selection.     

Selection of cassava accessions with multiple resistance to pathogens associated with root rot disease

Cassava root rot disease (CRRD) severely affects productivity in several countries. The objective of this study was to estimate genetic parameters and to identify multiple resistance sources against pathogens associated with CRRD. The symptoms caused by Fusarium spp., Phytophthora spp., and Botryosphaeriaceae species in peel and pulp from the roots were evaluated in 277 accessions using a whole tuberous root inoculation method. The resistance data were obtained by REML/BLUP (restricted maximum likelihood/best linear unbiased predictor). The classic selection index (CI), multiplicative (MI), and sum of ranks (SRI) were used to identify the accessions with multiple resistance. For all pathogens, the environmental variance (\(\sigma_{e}^{2}\)) was the most important component. Individual heritability \(\left( {h_{g}^{2} } \right)\) was of low magnitude for resistance to most pathogens (0.16 ± 0.02—peel and 0.31 ± 0.03—pulp for Fusarium spp.; 0.26 ± 0.03—peel and 0.30 ± 0.03—pulp for Phytophthora spp.; and 0.28 ± 0.03—peel and 0.27 ± 0.03—pulp for Botryosphaereacea species). The distribution of CRRD symptoms indicated the presence of quantitative inheritance. The direct selection of the 15 more resistant accessions based on the genotypic predicted values result in high reductions of disease (>50%). However, there was a low matching rate of the most resistant accessions for each pathogen and the different parts of the tuberous roots (peel and pulp). The CI and MI were the most promising compared to the SRI to ensure high and balanced resistance for each pathogen. Understanding the genetic basis of resistance to CRRD and the identification of sources with multiple resistance may be useful in various management strategies to control the disease.     

Genome-wide association study of yield components and fibre quality traits in a cotton germplasm diversity panel

A genome-wide association study (GWAS) was conducted on a diversity panel of 103 cotton accessions over three seasons to determine genetic contributions to a range of cotton yield components including fibre quality, plant architecture and stomatal conductance traits. The accessions covered breeding lines, released cultivars and some obsolete cultivars that contributed significantly to modern breeding pools. They were genotyped with Illumina’s CottonSNP63 K single nucleotide polymorphism (SNP) assay. Broad-sense heritability was low for yield component traits (\(h_{B}^{2}\) = 0.14–0.43), except for gin turnout and boll weight (\(h_{B}^{2}\)) = 0.74 and 0.59, respectively), and low to high for fibre quality traits (\(h_{B}^{2}\) = 0.26–0.89). Population structure analysis revealed extensive admixture and cryptic relatedness amongst the accessions. Genome-wide linkage disequilibrium (LD) analyses showed LD decayed, on average, within a physical distance of 5 Mbp and reduced to 2 Mbp at r ² ≥ 0.2, suggesting that few markers are necessary for association mapping in cotton. A mixed linear model accounting for population structure and cryptic relatedness identified 17 and 50 significant SNP associations for fibre length and micronaire, respectively. GWAS failed to detect significant associations in other traits, with the contribution of any single SNP to the phenotypic falling below 5%. This may be due to the low level of DNA polymorphism in cotton and/or insufficient resolution provided by the cotton SNP chip. Whole genome sequencing combined with whole genomic selection approaches that do not require prior knowledge about the effect or function of individual SNPs may be better suited than GWAS for trait dissection and prediction in cotton breeding.     

Genetic and phenotypic parameters in common bean segregant populations from intra and inter-gene pool crosses of elite lines

This study aimed compare segregating populations of common bean (Phaseolus vulgaris L.) derived from intra and inter-gene pool crosses of elite lines by estimates of some genetic and phenotypic parameters. Four elite lines highly adapted to Brazilian conditions were used (ESAL 686 and BRS Radiante: Andean gene pool; BRSMG Majestoso and BRS Valente: Mesoamerican gene pool). Two intra-gene pool (“A”: ESAL 686 × BRS Radiante; “B”: BRS Valente × BRSMG Majestoso) and two inter-gene pool segregant populations (“C”: BRS Radiante × BRSMG Majestoso and “D”: ESAL 686 × BRS Valente) were obtained. The parental lines, the cultivar Pérola and fifty-five F_2:3 progenies of each population were evaluated in the rainy season 2010/2011, and afterwards (F_2:4) in dry season of 2011. Estimates of genetic variance ( $\hat{\sigma }_{G}^{2}$ ), heritability on a progeny mean basis ( $\hat{h}_{p}^{2}$ ), heritability realized ( $\hat{h}_{R}^{2}$ ) and gain expected from selection (GS) were obtained at joint analysis, in each population, for the traits number of days to flowering (DTF), 100 seed weight (100SW) and seed yield (SYD). It was observed that for all traits, inter-gene pool crosses (“C” and “D”) showed higher estimates of $\hat{\sigma }_{G}^{2}$ , $\hat{h}_{p}^{2}$ , $\hat{h}_{R}^{2}$ and GS than intra-gene pool crosses (“A” and “B”), which indicates more genetic variability. However, for SYD, the higher variability was associated to lower average of seed yield, showing that even utilizing adapted parents the inter-gene pool crosses are inferior to crosses between lines of the same gene pool.     

Genetic mapping of resistance to <Emphasis Type="Italic">Puccinia hordei</Emphasis> in three barley doubled-haploid populations

The success of breeding for barley leaf rust (BLR) resistance relies on regular discovery, characterization and mapping of new resistance sources. Greenhouse and field studies revealed that the barley cultivars Baronesse, Patty and RAH1995 carry good levels of adult plant resistance (APR) to BLR. Doubled haploid populations [(Baronesse/Stirling (B/S), Patty/Tallon (P/T) and RAH1995/Baudin (R/B)] were investigated in this study to understand inheritance and map resistance to BLR. The seedlings of two populations (B/S and R/B) segregated for leaf rust response that conformed to a single gene ratio (\({\text{X}}_{1:1}^{2}\) = 0.12, P > 0.7 for B/S and \({\text{X}}_{1:1}^{2}\) = 0.34, P > 0.5 for R/B) whereas seedlings of third population (P/T) segregated for two-gene ratio (\({\text{X}}_{1:1}^{2}\) = 0.17, P > 0.6) when tested in greenhouse. It was concluded that the single gene in Baudin and one of the two genes in Tallon is likely Rph12, whereas gene responsible for seedling resistance in Stirling is Rph9.am (allele of Rph12). The second seedling gene in Tallon is uncharacterized. In the field, APR was noted in lines that were susceptible as seedlings. A range of disease responses (CI 5–90) was observed in all three populations. Marker trait association analysis detected three QTLs each in populations B/S (QRph.sun-2H.1, QRph.sun-5H.1 and QRph.sun-6H.1) and R/B (QRph.sun-1H, QRph.sun-2H.2, QRph.sun-3H and QRph.sun-6H.2), and four QTLs in population P/T (QRph.sun-6H.2, QRph.sun-1H.2, QRph.sun-5H.2 and QRph.sun-7H) that significantly contributed to low leaf rust disease coefficients. High frequency of QRph. sun-5H.1, QRph. sun-6H.1, QRph. sun-1H.1, QRph. sun-2H.2, QRph. sun-6H.2, QRph. sun-7H (based on presence of the marker, closely associated to the respective QTLs) was observed in international commercial barley germplasm and hence providing an opportunity for rapid integration into breeding programmes. The identified candidate markers closely linked to these QTLs will assist in selecting and assembling new APR gene combinations; expectantly this will help in achieving good levels of durable resistance for controlling BLR.     

Cytoplasmic male sterile and doubled haploid lines with desirable combining ability enhances the concentration of important antioxidant attributes in <Emphasis Type="Italic">Brassica oleracea</Emphasis>

The Brassica vegetable crops are rich source of important antioxidant compounds having anticancer and health promoting properties. Development of F₁ hybrids with better nutritional traits is one of the main breeding objectives in different vegetable crops. Our study is the first report of determining heterotic combinations utilizing cytoplasmic male sterile (CMS) and doubled haploid (DH) inbred lines for antioxidant compounds in snowball cauliflower. Twenty genetically diverse Ogura CMS lines of cauliflower and six DH male fertile inbred lines were crossed to develop 120 F₁ hybrids in line?×?tester mating design. The resulting 120 test cross progenies along with 26 parents and 4 standard checks were evaluated in 10?×?15 alpha lattice design with three replications during next cropping season. The CMS lines Ogu33-1A, Ogu122-5A and Ogu119-1A were good general combiner and CMS line Ogu118-6A was poor general combiner for majority of traits. Most of the heterotic hybrids were associated with high positive SCA effects. The proportions of σ²A/D and \(\upsigma^{2}_{\text{gca}} /\upsigma^{2}_{\text{sca}}\) ratios were less than unity in all the cases indicating preponderance of non-additive gene action in the genetic control of all the traits. Highest number of heterotic hybrids with SCA effects in desired positive direction was recorded for ascorbic acid content and phenolic content followed by total carotenoid content. The F₁ hybrids with better combining ability and better per se performance could be useful in accumulation of favourable allele for higher concentration of important anti-oxidant compounds.     

Genetic characterization of an Italian Giant Reed (Arundo donax L.) clones collection: exploiting clonal selection

This study is the first report of combining ability and heterosis for important vitamins and antioxidant plant pigments in cauliflower. Five CMS lines were crossed with 8 male fertile lines in line × tester design to develop 40 hybrids. These hybrids along with parental lines were evaluated for different vitamins and anti-oxidant pigments to reveal extent of heterosis and genetic combining ability. The CMS line Ogu12A was good general combiner (gca effect) and Ogu16A was poor general combiner for most of the important traits under study. Most of the heterotic hybrid combinations were associated high specific combing ability (sca effect). However, gca effect was also important in developing quality heterotic hybrids. The proportions of $\sigma_{\text{gca}}^{ 2} /\sigma_{\text{sca}}^{2}$ were less than unity in all the cases indicating the role of non-additive gene action for most of the traits. Highest number of heterotic hybrids in positive direction was recorded for ascorbic acid content followed by anthocyanin content. The accumulated average heterosis of the 40 hybrids was in positive direction for ascorbic acid, anthocyanin and lycopene concentration whereas it was in negative direction for carotenoids and chlorophyll pigments. Very high heterosis for ascorbic acid, anthocyanin and carotenoids in cauliflower indicated the scope for development of F₁ hybrids with higher concentration of these vitamins and anti-oxidant pigments. It is possible to develop heterotic hybrids for different vitamins and anti-oxidant plant pigments through selection of parental lines based on desirable genetic combing ability.     

Rubber tree early selection for yield stability in time and among locations

Rubber production in the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. Arg.] can be expressed differently in different environments. Thus the objective of the present study was to select productive progenies, stable and responsive in time and among locations. Thirty progenies were assessed by early yield tests at three ages and in three locations. A randomized block design was used with three replications and ten plants per plot, in 3 × 3 m spacing. The procedure of the mixed linear Reml/Blup model—restricted maximum likelihood/best non-biased linear prediction was used in the genetic statistical analyses. In all the individual analyses, the values observed for the progeny average heritability ( $ \hat{h}_{pa}^{2} $ ) were greater than those of the additive effect based on single individuals ( $ \hat{h}_{a}^{2} $ ) and within plot additive ( $ \hat{h}_{ad}^{2} $ ). In the joint analyses in time, there was genotype × test interaction in the three locations. When 20 % of the best progenies were selected the predicted genetic gains were: Colina G_G = 24.63 %, Selvíria G_G = 13.63 %, and Votuporanga G_G = 25.39 %. Two progenies were among the best in the analyses in the time and between locations. In the joint analysis among locations there was only genotype × location interaction in the first early test. In this test, selecting 20 %, the general predicted genetic gain was G_G = 25.10 %. Identifying progenies with high and stable yield over time and among locations contributes to the efficiency of the genetic breeding program. The relative performance of the progenies varies depending of the age of early selection test.     

Breeding of high yielding and dwarf oil palm planting materials using Deli <Emphasis Type="Italic">dura</Emphasis> × Nigerian <Emphasis Type="Italic">pisifera</Emphasis> population

In practice, progeny and individual palm selection are believed to be the most suitable breeding approach for improvement of quantitative traits in oil palm because their phenotypic expressions are strongly influenced by abiotic factors. Therefore progeny selection approach was applied in this study for the selection of high fresh fruit bunch (FFB) and dwarf oil palm planting materials. Cross between Deli dura and Nigerian pisifera resulted into 34 D × P full sib progenies with 1036 seedlings. For six consecutive years, data were collected on yield and yield component traits, while vegetative traits were recorded once. Bi-parental analysis was carried out using analysis of variance, followed by progenies mean comparison, variance components, heritabilities and cluster analysis. Highly significant (P ≤ 0.01) progeny effect was recorded in this study and this had a pronounced effect on the expression of all the quantitative traits. Progenies performance of FFB varied significantly and it ranged from 166.49 to 220.06 kg/palm/year (kg/p/yr) with trial mean of 192.93 kg/p/yr. Palm height after 8 years of field planting ranged from 1.67 to 2.78 m (control cross) with trial mean of 2.12 m. Broad sense heritability (\({\text{h}}_{\text{B}}^{2}\)) was found to be very low (<17.60%) for all the yield traits, however this parameter was high for vegetative traits with palm height having \({\text{h}}_{\text{B}}^{2}\) of 90%. Cluster analysis based on all the quantitative traits grouped all the 34 DP progenies into nine distinct clusters. From this study, five progenies (DP3, DP4, DP5, DP8 and DP24) were identified to be high yielding and dwarf palms compare to trial mean. At density of 140 palm/ha, they will produce FFB of 28.63–30.81 t/ha and average of 29.69 t/ha which is about 27.15% higher in FFB when compared to the current planting material with FFB of 23.35 t/ha. In addition, the selected progenies possessed average annual palm increment of 29.82 cm/yr with range of 26 and 32.5 cm/yr which was 57.33% shorter than the current planting material with palm height increment of 45–75 cm/yr.     

Genetic variation and environmental stability of grain mineral nutrient concentrations in <Emphasis Type="Italic">Triticum dicoccoides</Emphasis> under five environments

Nineteen wild emmer wheat [Triticum turgidum ssp. dicoccoides (Körn.) Thell.] genotypes were evaluated for the grain concentrations of phosphorous (P), potassium (K), sulfur (S), magnesium (Mg), calcium (Ca), zinc (Zn), manganese (Mn), iron (Fe) and cooper (Cu) under five different environments in Turkey and Israel. Each mineral nutrient has been investigated for the (1) genotype by environment (G × E) interactions, (2) genotype stability, (3) correlation among minerals and (4) mineral stability. Among the macronutrients analyzed, grain concentrations of Ca (range 338–2,034 mg kg^?1) and S (range 0.18–0.43%) showed the largest variation. In the case of micronutrients, the largest variation was observed in the grain Mn concentration (range 13–87 mg kg^?1). Grain concentrations of Fe and Zn also showed important variation (range 27–86 and 39–115 mg kg^?1, respectively). Accessions with higher nutrient concentrations (especially Zn and Fe) had also greater grain weight, suggesting that higher grain Zn and Fe concentrations are not necessarily related to small grain size or weight. Analysis of variance showed that environment was the most important source of variation for K, S, Ca, Fe, Mn and Zn, explaining between 44 and 78% of the total variation and G × E explained between 20 and 40% of the total variation in all the minerals, except for S and Zn where its effect accounted for less than 16%. Genotype was the most important source of variation for Cu (explaining 38% of the total variation). However, genotype effect was also important for Mg, Mn, Zn and S. Sulfur and Zn showed the largest heritability values (77 and 72%, respectively). Iron exhibited low heritability and high ratio value between the G × E and genotype variance components \( \left( {\sigma_{\text{GE}}^{2} /\sigma_{G}^{2} } \right) \), suggesting that specific adaptation for this mineral could be positively exploited. The wild emmer germplasm tested in the current study revealed some outstanding accessions (such as MM 5/4 and 24-39) in terms of grain Zn and Fe concentrations and environmental stability that can be used as potential donors to enhance grain micronutrient concentrations in wheats.     

Correlations between the stability and adaptability statistics of popcorn cultivars

In plant breeding, correlations between the statistics of stability and adaptability of popcorn cultivars are not yet well understood. Therefore, the objectives of the present experiment was to investigate the correlations between s_di² \sigma_{\rm di}^{2} and b_i \beta_{\rm i} from Eberhart and Russell, ω_i from Wricke, \textS_\texti⁽¹⁾ {\text{S}}_{\text{i}}^{(1)} , \textS_\texti⁽²⁾ {\text{S}}_{\text{i}}^{(2)} and \textS_\texti⁽³⁾ {\text{S}}_{\text{i}}^{(3)} from Huehn, P_i from Lin and Binns and the rank-sum from Kang, and indicate the most reliable method for selecting popcorn cultivars. These statistics were estimated by data of crop yield from 19 Brazilian genotypes under 21 environments and popping expansion under 16 environments. The ω_i, \textS_\texti⁽¹⁾ {\text{S}}_{\text{i}}^{(1)} , \textS_\texti⁽²⁾ {\text{S}}_{\text{i}}^{(2)} , \textS_\texti⁽³⁾ {\text{S}}_{\text{i}}^{(3)} and s_di² \sigma_{\rm di}^{2} were positively and significantly correlated indicating that just one in these five statistics is sufficient for selecting stable genotypes although they were not correlated with the means of crop yield and popping expansion. The b_i \beta_{\rm i} was negatively and significantly correlated with P_i for crop yield indicating that the most adaptable genotypes tend to have the lowest estimates of P_i. Although P_i was not correlated with ω_i, \textS_\texti⁽¹⁾ {\text{S}}_{\text{i}}^{(1)} , \textS_\texti⁽²⁾ {\text{S}}_{\text{i}}^{(2)} , \textS_\texti⁽³⁾ {\text{S}}_{\text{i}}^{(3)} , or s_di² \sigma_{\rm di}^{2} statistics, it displayed positive correlation with the Index 1 (crop yield and popping expansion +  \textS_\texti⁽¹⁾ {\text{S}}_{\text{i}}^{(1)} rank) and Index 2 (crop yield and popping expansion + W_i) indicating that superior popcorn genotypes are also stable. Finally, both P_i and the rank-sum are useful statistics in breeding programmes where crop yield, popping expansion and stability are essential traits for selecting genotypes.     

Interrelationship among and repeatability of seven stability indices estimated from commercial cotton (<Emphasis Type="Italic">Gossypium hirsutum</Emphasis> L.) variety evaluation trials in three Mediterranean countries

Multi-environment trial data are required, to obtain variety stability performance parameters as selection tools for effective cultivar evaluation. The interrelationship among seven stability parameters and their association with mean yield, along with the repeatability of these parameters across consecutive years was the objective of this study. Cottonseed yield data of 31 cotton cultivars, proprietary of Delta and Pine Land Co and other companies, evaluated in 20 locations over the 1999–2005 year period in Greece, Spain and Turkey were used for combined analysis of variance in four datasets. Across locations in a single evaluation year (dataset A), across locations in each of two single consecutive evaluation year (dataset B), across locations and two consecutive years (dataset C) and across locations and three consecutive years (dataset D). For each dataset, cultivar phenotypic variance was appropriately partitioned in its components and the h² and component estimated. Furthermore, following the appropriate stability analysis and AMMI1 along with the GGE Biplot distance (GGED) and instability (GGEIN) parameters were obtained. The interrelationship among the parameters and their association with mean yield based on Spearman rank correlation was studied in each of the seven single evaluation years (dataset A). Rank correlation coefficients were also used as estimates of the repeatability of these stability parameters across consecutive year combinations (dataset B, C and D). The parameters GGED and YS_i were consistently highly correlated with each other and mean yield in five out of seven single evaluation years. The data provided evidence that single year evaluation across locations might be sufficient to reliably rank cotton cultivars, based on mean yield along with GGED and YS_i. Combined analysis across two consecutive years (dataset C) was more effective as compared to single year evaluation. GGED was relatively more repeatable than YS_i and mean yield in single (dataset B) and 2-year comparisons (dataset C). Although GGED is an index depended and proportional to yield, provides a superior way to integrate mean performance and stability into a single measure, which can be assessed visually on biplots. Regarding the other stability parameters, the results were contradicting and of low repeatability across single years and two consecutive years. Cultivar evaluation combined across locations in 3 years did not improve the repeatability of cultivar variance effects but resulted in very high repeatability of GGED, YS_i and mean yield.     

A heritability-adjusted GGE biplot for test environment evaluation

Test environment evaluation has become an increasingly important issue in plant breeding. In the context of indirect selection, a test environment can be characterized by two parameters: the heritability in the test environment and its genetic correlation with the target environment. In the context of GGE biplot analysis, a test environment is similarly characterized by two parameters: its discrimination power and its similarity with other environments. This paper investigates the relationships between GGE biplots based on different data scaling methods and the theory of indirect selection, and introduces a heritability-adjusted (HA) GGE biplot. We demonstrate that the vector length of an environment in the HA-GGE biplot approximates the square root heritability (\( \sqrt H \)) within the environment and that the cosine of the angle between the vectors of two environments approximates the genetic correlation (r) between them. Moreover, projections of vectors of test environments onto that of a target environment approximate values of \( r\sqrt H \), which are proportional to the predicted genetic gain expected in the target environment from indirect selection in the test environments at a constant selection intensity. Thus, the HA-GGE biplot graphically displays the relative utility of environments in terms of selection response. Therefore, the HA-GGE biplot is the preferred GGE biplot for test environment evaluation. It is also the appropriate GGE biplot for genotype evaluation because it weights information from the different environments proportional to their within-environment square root heritability. Approximation of the HA-GGE biplot by other types of GGE biplots was discussed.     

Application of half-sib mating for genetic analysis of forage yield and related traits in Bromus inermis

Despite efforts made, forage yield of smooth bromegrass has increased slowly over the last 50 years of breeding. It therefore seems necessary to investigate more on the genetic basis of agro-morphological traits in this cool-season, highly drought resistant grass. The present study was aimed at estimation of total genetic variance, narrow-sense heritability, general combining ability, phenotypic and genotypic correlation among different quantitative traits in half-sib (HS) families derived from polycross of 25 smooth bromegrass genotypes that were mainly originated from Iran. Families differed significantly for all of the agro-morphological and quality traits measured. Narrow sense heritability ( ${\text{h}}_{\text{n}}^{2}$ ) ranged from about 0.2 (plant height) to 0.7 (day to inflorescence emergence and day to anthesis). Moderate to high heritability for forage dry matter yield (0.42) indicates that phenotypic selection for this trait can be successful. A wide range of general combining ability was observed for most of the studied traits, especially those related to forage yield. Relatively low genetic variation and heritability for crude protein and also negative correlation of this trait with forage yield, indicates a low probability of improving forage yield and quality simultaneously.     

Genetic dissection of a chromosomal region conferring hybrid sterility using multi-donors from Oryza glaberrima

A chromosomal region containing a hybrid sterility locus, S ₁, from Oryza glaberrima, located on the short arm of chromosome 6, was investigated in 15 BC₇F₁ and one BC₃F₂ populations. As a gamete eliminator, S ₁ induced both male and female gamete abortion and responded to typical, spherical, or empty pollen abortion when it was heterozygous. The gametes carrying S ₁ ^a (Oryza sativa allele in S ₁) in the heterozygous S ₁ locus had been eliminated in previous studies. We found here that both male and female gametes carrying the S ₁ ^a allele were killed incompletely in heterozygous (S ₁ ^g S ₁ ^a ) plants, with 26.22% female and 9.06% male gametes with the S ₁ ^a genotype remaining when the BC₃F₁ sterile plant produced male and female gametes, which fits with the hypothesis that the ratio of S ₁ ^a gametes of the female that were killed is higher than that of the male gametes. In addition, in sterile BC₆F₁ plants with the heterozygous S ₁ locus, not only a majority of the female gametes carrying the S ₁ ^a allele, but also a quite number of those carrying the S ₁ ^g allele (O. glaberrima allele in S ₁) could not be transmitted to their offspring. This abnormal transmission of female gametes illustrates the complexity of the reproductive isolation mechanism caused by S ₁ and can not be explained by the ‘one locus, sporo-gametal interaction’ model alone. Interaction for female sterility between S ₁ and two other loci on chromosomes 1 and 4 that suppress the expression of S ₁ was identified. S ₁ is the main reproductive isolation locus when mining favorable traits/genes from O. glaberrima due to its ubiquity between these two species, and the development of bridge parents carrying S ₁ should be a useful method for overcoming or abating this obstacle between these two species. The chromosomal region of S ₁ may be the hot region of genetic diversity for speciation because several hybrid sterility loci between species, subspecies, and even intra-subspecies have been identified in the same region.     

Genetical analysis of male-sterility in carrots,Daucus carota L.

1. 1.
   A genetical analysis of male-sterility in carrots was made in one set of F₁'s and in two sets of backcrosses.     
   
   

Tetraploid Italian ryegrass (Lolium multiflorum Lam.)

1. 1.
   Some preliminary experiments are described with C₂- and C₃-generations of tetraploid Italian ryegrass. In all cases the tetraploids had a lower dry matter content than the diploids.     
   
   

Identification of QTL controlling post-flowering period in soybean

The length of the reproductive period affects the grain yield of soybean (Glycine max [L.] Merr), and genetic control of the period might contribute to yield improvement. To detect genetic factor(s) controlling the reproductive period, a population of recombinant inbred lines (RILs) was developed from a cross between Japanese landrace ‘Ippon-Sangoh’ and, Japanese cultivar ‘Fukuyutaka’ which differ in their duration from flowering to maturation (DFM) relative to the difference in the duration from sowing to flowering (DSF). In the RIL population, the DFM correlated poorly (r = −0.16 to 0.34) with the DSF in all field trials over 3 years. Two stable QTLs for the DFM on chromosomes (Chr-) 10 and 11 as well as two stable QTLs for the DSF on Chr-10 and -16 were identified. The QTL on Chr-11 for the reproductive period (designated as qDfm1; quantitative trait locus for duration from flowering to maturation 1) affected all three trials, and the difference in the DFM between the Fukuyutaka and Ippon-Sangoh was mainly accounted for qDfm1, in which the Fukuyutaka allele promoted a longer period. qDfm1 affected predominantly the reproductive period, and thus it might be possible to alter the period with little influence on the vegetative period.     

Frequency and spectrum of mutations induced by radiations in some varieties of bread wheat

1. 1.
   The frequency and types of mutations induced by different dosages of X-rays, fast and thermal neutrons and beta particles from P³² and S³⁵ were studied in two fully awned (C. 591 and H. 167) and two awnless strains (N.P. 809 and H. 389) of bread wheat.