A Dynamic Mathematical Model of Ball Pulverized Storage System and Its Simulation with MMS

This paper presents a mathematical model , simulating program and results ofball pulverlzed coal storage system. The program of simulation is writen with ACSL language. theGear arithmetics to solve the differentlal equations is recom merded by MMS. The model has beenmodularized according to the reguirements of MMS. This modular called DTM modular can be con-sidered as one component of MMS modular library.     

MATLAB和VB在温室环境模型构建中的混合编程研究

旨在找到一种MATLAB和VB混合编程的方法,实现日光温室热环境模拟模型软件的可视化编写。采用基于组件对象模型COM（component object module）的方法,研究了MATLAB和VB在模型构建中的混合编程。采用MATLAB软件编写M.源函数文件,实现理论模型中的工程计算和图像图形处理功能,M.源函数文件编译成功后,通过COM方法转换为可被独立调用的组件;采用VB软件编写主程序文件,实现良好的人机交互功能。在主程序中完成模型各项参数的赋值后,再调用COM组件进行理论模型的计算与绘图。COM组件方法可以实现MATLAB和VB的混合编程。以此构建的日光温室热环境模拟模型软件,可在主程序输入各项参数：室外气象条件,温室结构、热性能等,模拟室内热环境的变化。     

Application of Slicing in Component-based System Regression Testing

In component-based system regression testing, the dependence model of component-based system should be built in order to confirm the part which will be affected by modify. Since high reusability and high complexity, the existing dependence models may not be applicable to component-based systems, a hierarchical dependence model is proposed to describe component-based. Through the forward slicing of modified points in the model, the modified and affected parts can be gotten, then traverse these parts and get affected testing path, thereby regression testing examples can be chosen effectively, the efficiency of regression testing can be improred.     

Application of FODA in the MIS Reusable Component Development

Domain engineering is an activity for building reusable components. Domain engineering addresses the systematic creation of domain models and architectures. Domain analysis is a software engineering process that identifies, captures, organizes, analyzes, and represents information about a software domain to determine software architecture, framework, and component, and to support the reuse or software components. This method is one of the key techniques to solve the reuse problem. The article introduces the Feature-Oriented Domain Analysis (FODA), developed at the Software Engineering Institute (SEI). The article mainly discusses the application of FODA in the MIS development reusable component. It proves that FODA is an effective and efficient way to develop reusable component.     

Simulation and Experiment of the Forging Process of Railway Lorry Bomsster

Bomsster is a key load-bearing part of railway lorry bogie.Because of its inherent defects casting-steel bomsster could not meet the demands of the heavy load,acceleration and security for lorry.So forging process is proposed to form it.The forming performance of forging-steel bomsster is analyzed.A forging technology is presented which realizes two forging-steel bomsster parts formed in one die.With the plastic forming simulation software DEFORM-3D,the simulation and optimization of the forming process of forging bomsster has been taken based on 3D rigid visco-plastic FEM theory.Optimized scheme has been used to direct the pilot product.The results of product's testing and application suggest that the new forging technology is feasible and the performance of the product is credibility and stabilization.The factory has realized large scale production of a series of forging-steel bomsster.Remarkable benefits of both economy and society have been achieved.     

The DSSAT cropping system model

The decision support system for agrotechnology transfer (DSSAT) has been in use for the last 15 years by researchers worldwide. This package incorporates models of 16 different crops with software that facilitates the evaluation and application of the crop models for different purposes. Over the last few years, it has become increasingly difficult to maintain the DSSAT crop models, partly due to fact that there were different sets of computer code for different crops with little attention to software design at the level of crop models themselves. Thus, the DSSAT crop models have been re-designed and programmed to facilitate more efficient incorporation of new scientific advances, applications, documentation and maintenance. The basis for the new DSSAT cropping system model (CSM) design is a modular structure in which components separate along scientific discipline lines and are structured to allow easy replacement or addition of modules. It has one Soil module, a Crop Template module which can simulate different crops by defining species input files, an interface to add individual crop models if they have the same design and interface, a Weather module, and a module for dealing with competition for light and water among the soil, plants, and atmosphere. It is also designed for incorporation into various application packages, ranging from those that help researchers adapt and test the CSM to those that operate the DSSAT–CSM to simulate production over time and space for different purposes. In this paper, we describe this new DSSAT–CSM design as well as approaches used to model the primary scientific components (soil, crop, weather, and management). In addition, the paper describes data requirements and methods used for model evaluation. We provide an overview of the hundreds of published studies in which the DSSAT crop models have been used for various applications. The benefits of the new, re-designed DSSAT–CSM will provide considerable opportunities to its developers and others in the scientific community for greater cooperation in interdisciplinary research and in the application of knowledge to solve problems at field, farm, and higher levels.     

基于DNA指纹建立农作物品种身份证的方法探析

为解决种子生产、经营和知识产权保护中存在的突出问题,本文提出了构建农作物品种身份证及建立品种身份证制度。在借鉴人类身份证建立模式基础上,将品种的商品信息、指纹信息及特异基因信息相结合,构建农作物的品种身份证。农作物品种身份证由3部分构成：第1部分称为商品码,反映作物及品种类别、品种选育（或审定）的区域和时间等,预设14位阿拉伯数字（或字母）;第2部分称为指纹码,反映品种的DNA指纹信息,依据作物类型不同预设20~40位阿拉伯数字（或字母）;第3部分称为补充码（特异基因识别码）,反映品种的特异基因信息,设计为字母“T”（转基因育种）、“S”（分子育种）和“M”（诱变育种）等,加上被导入、渗入或诱变的基因名称;身份证总位数约50位。采用本方法编码的农作物品种身份证,具有准确性高、通用性强及可追溯性等特点,对我国农作物品种的科学识别和管理具有十分积极的意义。     

Torsional Vibration Simulation Analysis of Drilling String and Rock Bit

In this paper,the method of establishing the torsional vibration model of drilling string and rock bit and the process of simulation analysis are introduced.The interaction between bit and rock and elastic deformation of drilling string in the process of petroleum drilling which caused the torsional vibration of the drilling string and rock bit is main considered in establishing the model.The torsional model is solved by difference method.Based on the models,the simulation analysis software of drilling string and rock bit is designed,and simulation calculation and analysis of the tortional vibration of drilling string and rock bit under different conditions are computed,and the dynamic behavior and kinetics regularity of drilling string and rock bit in drilling are obtained.     

Sharing knowledge via software components: Models on reference evapotranspiration

Evapotranspiration (ET) is a cross-platform software component containing routines to estimate daily and hourly values of reference evapotranspiration (and related variables) according to alternative approaches. A standardized form of the FAO-56 implementation of the Penman–Monteith equation is used to estimate daily and hourly evapotranspiration for two reference surfaces (namely clipped grass and alfalfa). Other methods (implementations of Priestley–Taylor and Hargreaves equations) estimate daily evapotranspiration from limited sets of inputs. A multi-layer canopy, similar to a well-developed tomato crop within standard greenhouse conditions, is taken as a reference to estimate hourly evapotranspiration in greenhouse environment (Stanghellini approach). The component is released as .NET (C#) version, allowing the development of clients under Windows operating systems. The component has an extensive hypertext help file. The component design allows users developing client applications to extend the functionalities by adding further options for estimating reference ET. Illustrative examples of clients developed in C# are provided as source code; the component is made available as compiled version. Also, the component was used to activate a web service and a web application based on such a service; the relevant C# code is provided as example.     

厅堂侧向能量因子的仿真与实测

侧向能量因子是衡量厅堂空间感的重要客观指标之一。厅堂侧向能量因子通常采用计算机仿真的方法得到。首先采用MKH800电容型传声器在实际厅堂中开展侧向能量因子测试工作。然后,通过ODEON6.5建立厅堂三维仿真模型,计算相同位置处侧向能量因子的模拟值,并将实测值与模拟值进行对比分析。研究结果表明,各点位的仿真值均大于实测值,座席区前部偏差较小,正对舞台中后部区域偏差较大。造成偏差的主要原因是由于ODEON软件中扩散系数的设置与所在面特性无关,同时,软件无法分别定义各频段的扩散系数。因此,在实际工程项目中,为了准确地预测室内音质效果,建议普遍采用缩尺模型实验测量侧向能量因子。     

虚拟关节臂式坐标测量机模型的构建与验证

关节臂式坐标测量机的测量误差受到众多因素的影响,且由物理构件带来的误差无法被消除。为此,笔者旨在构建一种虚拟关节臂式坐标测量机。首先,采用D-H矩阵建立其运动学模型,其次,利用PC-DMIS测量软件分析测量机数据并对模型的精确性进行检验,最后使用蒙特卡罗法和测量机模型完成仿真测量。通过与实际参数构建的模型、制造商参数构建的模型相对比,可知所构建测量机模型的测量精度能够满足要求。仿真结果表明提出的模型构建与验证方法对坐标测量的应用具有较高的工程价值。     

考虑谷物呼吸的仓储粮堆热湿耦合传递研究

粮食作为生物性多孔介质,具有呼吸特性。一般粮食收获后,大部分时间在密闭不通风状态下存储。以粮堆内局部热湿耦合传递过程作为研究对象,分析了不通风状态下的圆筒形粮仓在自然对流条件下由于温度梯度影响而产生近似冬夏季工况的温度分布和水分转移,借助多物理场数值模拟软件(COMSOL)进行数值模拟,将粮食呼吸作用产热、产湿量以热源、湿源项考虑在数学模型中,通过对温度场、水分场的描述指导工程实践。     

植物根系固土作用模型研究进展

植物根系固土作用模型研究已历经近40年,从简单的极限平衡模型到复杂的有限元和离散元数值模型,已发展到10余种。总结这些根系固土作用模型不仅对揭示根系加固土壤作用的力学机制和分析林地边坡的稳定性具有重要意义,对根系固土作用模型未来的研究方向也具有积极指导意义。笔者对根系固土作用模型分2部分进行综述,第一部分主要介绍根系固土作用的理论模型,包括：Wu模型、倾斜根系模型、位移模型、纤维束模型、根束增强模型和能量模型,以及这些模型的应用条件、模型优缺点、适用范围等。第二部分主要综述根系固土作用的数值模型,包括：有限元数值模型、离散元数值模型和造林边坡稳定性分析数值模型,并详细比较了有限元与离散元数值模型的优缺点和在造林边坡稳定性分析上的应用。最后探讨了目前根系固土作用模型研究中存在的不足以及未来的发展方向。     

MATHEMATICAL MODEL AND DIGITAL SIMULATION FOR A REGENERATIVE HEATING SYSTEMS OF 200MW REHEATING STEAM TURBINE

Based on the physical processes of regenerative heating systems, the mathematical models of regenerative system,reheat system and steam turbine for a 200MW reheating steam turbine are presented, and the digital simulation of them on IBM-PC is also provided in this paper. The present work is a part of the study of the dynamic characteristics of all power systems. The mathematical model is expressed into state space form ,and its matrix is standardized to avoid the repeatation of establishing the models of heat exchangers.     

水氮胁迫对冬小麦籽粒灌浆速率影响的模拟研究

为定量分析水氮胁迫对冬小麦籽粒灌浆速率的影响,以‘济麦22’为材料,于2016—2017和2017—2018年度开展施氮试验。结合2017—2018年度试验资料,通过分析水氮胁迫对冬小麦籽粒灌浆速率的影响规律,引入氮素和水分影响因子,构建水氮胁迫对冬小麦籽粒灌浆速率影响的模拟模型S_(j,t)=S_(W3N300,t)×(1+F_N)×(1+F_W)。经2016—2017年小麦生长数据检验,除绝对误差占实测值比率d_ap略高外,RMSE值、平均绝对误差d_a以及相关系数r均显示模拟值和实测值有较高的一致性,说明实测值与模拟值吻合程度较好,所建模型可较好模拟水氮胁迫对冬小麦籽粒灌浆速率的影响。     

Improvement of spatially and temporally continuous crop leaf area index by integration of CERES-Maize model and MODIS data

The spatially and temporally continuous leaf area index (LAI) mapping is very crucial for many agricultural applications, such as crop yield estimation and growth status monitoring. Data assimilation technology provides an innovational way to improve spatio-temporally continuous crop LAI estimation through integration of remotely sensed observations and crop growth models. In this study, a very fast simulated annealing (VFSA)-based variational assimilation scheme was proposed to integrate the crop growth model (CERES-Maize), MODIS reflectance product (MOD09A1) and a two-layer canopy reflectance model (ACRM) to estimate time-series crop LAI at regional scale. Simultaneously, a new sensitivity analysis method (called “histogram comparison”) was developed to identify sensitive parameters of CERES-Maize and ACRM models. The proposed scheme was applied for continuous crop LAI estimation during the maize growing season in the dominating spring maize planting area of Jilin province, China. Results showed that R² values between LAI estimations from the proposed assimilation scheme (referred to as assimilated LAI) and fine resolution LAI reference maps were 0.24 and 0.63, with RMSE values of 0.21 and 0.54 for Julian day 176, 2010, and Julian day 196, 2010, respectively. The assimilated results were closer to LAI reference maps than the MODIS LAI product and ACRM-based inversion results (referred to as ACRM LAI). Moreover, by introducing the prior information of LAI dynamics depicted by a crop growth model, the assimilated LAI showed better temporal consistency than the MODIS LAI product, LAI profiles simulated by CERES-Maize model (referred to as CERES-Maize LAI), and ACRM LAI. It was found that the accuracies of LAI estimations could be enhanced by assimilating satellite observations into a crop simulation model in the VFSA framework at a regional scale.     

Design and optimization of drawing surface and FE analysis forthe front side panel of autobody

The drawing process of the front side panel of autobody is simulated by using the finite element software, Dynaform. The drawing surface is designed, focusing on the optimization of the addendum and the drawbead layout. By comparing the stress/strain conditions and the FLD in two types of addendum (stepped and slope) and three types of drawbead layout (closed, discontinuous and oblique drawbead), the slope addendum is chosen as the optimized addendum and the oblique drawbead is chosen as the optimized drawbead layout. The simulation results show the material flow in the corner and the quality of the part can be improved effectively with the optimized drawing surface. The optimized parameters are employed in production and acceptable quality parts are produced. Therefore, the optimized drawing surface is verified to be effective.     

太阳能制冷机组通风系统中粮库温度的系统分析

针对不同的粮库内部太阳能制冷机组空调分布形式,利用CFD计算软件,采用标准k-e模型对粮库内部的大空间气流组织的非稳定特性进行三维数值模拟,分别比较了集中辐射式分布和沿四壁周向式分布两种形式的粮食表面附近的截平面的速度和温度分布,模拟结果显示:采用集中辐射式分布的模型流场扰动范围大,换热效果好,温度场分布均匀,整体降温效果好.由此可以看出流体计算技术在研究空调换热空间速度场和温度场分布的巨大作用,为空调的设计运行参数提供了重要依据,从而可以选用换热效果更好的空调分布形式.     

Use of crop models to understand genotype by environment interactions for drought in real-world and simulated plant breeding trials

Crop simulation models of plant processes capture the biological interactions between the sensing of signals at an organ level (e.g. drought affecting roots), the response of the plant at a biochemical level (e.g. change in development rate) and the result at the organ (or crop) level (e.g. reduced growth). In dissecting the complex control of phenotypes like yield, simulation models have several roles. Models have been used to generate an index of the climatic environment (e.g. of drought stress) for breeding programme trials. In wheat and sorghum grown in northern Australia, this has shown that mid-season drought generates large genotype by environment interaction. By defining gene action to calculate the value of input trait parameters to crop models, simulated multi-environment trials estimate the yield of ‘synthetic’ sorghum cultivars grown in historical or artificial climates with current or potential management regimes. In this way, the biological interactions among traits constrain the crop yields to only those that are biologically possible in the given set of environments. This allows the construction of datasets that are more ‘realistic’ representations of gene by trait by environment interaction than is possible using only the statistical attributes (e.g. means, variances and correlations) of real-world trait datasets. This approach has an additional advantage in that ‘biological and experimental noise’ can be manipulated separately. These ‘testbeds’ for statistical techniques can be extended to the interpretation of a crossing and selection programme where the processes of chromosomal recombination are simulated using a quantitative genetics model and applied to the trait parameters. Statisticians are challenged to develop improved methods for the resulting simulated phenotype datasets, with the objective of revealing the (known) underlying genetic and environment structure that was input to the simulations. These improved methods can then be applied to existing plant breeding programmes.