Phytate negatively influences wheat dough and bread characteristics by interfering with cross-linking of glutenin molecules

The influence of added phytate on dough properties and bread baking quality was studied to determine the role of phytate in the impaired functional properties of whole grain wheat flour for baking bread. Phytate addition to refined flour at a 1% level substantially increased mixograph mixing time, generally increased mixograph water absorption, and reduced the SDS-unextractable protein content of dough before and after fermentation as well as the loaf volume of bread. The added phytate also shifted unextractable glutenins toward a lower molecular weight form and increased the iron-chelating activity of dough. It appears that phytate negatively affects gluten development and loaf volume by chelating iron and/or binding glutenins, and consequently interfering with the oxidative cross-linking of glutenin molecules during dough mixing. Phytate could be at least partially responsible for the weak gluten network and decreased loaf volume of whole wheat flour bread as compared to refined flour bread.     

Effect of barley and oat flour types and sourdoughs on dough rheology and bread quality of composite wheat bread

The potential of sourdough to improve bread quality of barley and oat enriched wheat breads may depend on the characteristics of the added flour (cereal type, variety, extraction rate). We compared the effect of different barley flours and oat bran (substitution level 40%), unfermented and as sourdoughs (20% of total flour), on composite wheat dough and bread characteristics by combining empirical rheological analyses (DoughLab, SMS/Kieffer Dough and Gluten Extensibility Rig) with small-scale baking of hearth loaves. Whole grain barley flour sourdough increased resistance to extension (Rmax) of the dough and improved the form ratio of hearth loaves compared to unfermented whole grain barley flour. However, sourdough showed little effect on the breads prepared with sifted barley flour or oat bran. The breads made with oat bran showed highest bread volume, lowest crumb firmness and highest β-glucan calcofluor weight average molecular weight (MW). The heat treatment of oat bran inactivated endogenous enzymes resulting in less β-glucan degradation. High MW β-glucans will increase the viscosity of the doughs water phase, which in turn may stabilise gas cells and may therefore be the reason for the higher bread volume of the oat bran breads observed in our study.     

Effect of wheat bran and enzyme addition on dough functional performance and phytic acid levels in bread

Effects of bran concentration, bran particle size distribution, and enzyme addition – fungal phytase, fungal alpha-amylase – on the mixing and fermentative behaviour of wheat dough and on the amount of phytic acid remaining in bread have been investigated using a factorial design of samples 2⁴. Bran concentration and bran particle size significantly affected all Farinograph parameters, whereas enzyme effects were particularly observed on both the water absorption of the flour and the parameters characterizing the overmixing. Water absorption was maximized in doughs with higher fine bran addition and/or in doughs with no enzymes, and was minimized in blends containing coarse added bran and alpha-amylase and/or alpha-amylase and phytase. alpha-Amylase addition had a significant positive effect on dough development and gassing power parameters during proofing. At low bran addition, phytate hydrolysis takes place to a greater extent than at high bran addition levels. Combination of bran with amylolytic and phytate-degrading enzymes could be advisable for overcoming the detrimental effect of bran on the mineral availability (phytase) or on the technological performance of doughs (alpha-amylase).     

Effect of wheat bran and enzyme addition on dough functional performance and phytic acid levels in bread

Effects of bran concentration, bran particle size distribution, and enzyme addition – fungal phytase, fungal alpha-amylase – on the mixing and fermentative behaviour of wheat dough and on the amount of phytic acid remaining in bread have been investigated using a factorial design of samples 2⁴. Bran concentration and bran particle size significantly affected all Farinograph parameters, whereas enzyme effects were particularly observed on both the water absorption of the flour and the parameters characterizing the overmixing. Water absorption was maximized in doughs with higher fine bran addition and/or in doughs with no enzymes, and was minimized in blends containing coarse added bran and alpha-amylase and/or alpha-amylase and phytase. alpha-Amylase addition had a significant positive effect on dough development and gassing power parameters during proofing. At low bran addition, phytate hydrolysis takes place to a greater extent than at high bran addition levels. Combination of bran with amylolytic and phytate-degrading enzymes could be advisable for overcoming the detrimental effect of bran on the mineral availability (phytase) or on the technological performance of doughs (alpha-amylase).     

Wholemeal wheat bread: A comparison of different breadmaking processes and fungal phytase addition

The effect of different breadmaking processes (conventional, frozen dough, frozen partially baked bread) and the effect of the storage period on the technological quality of fresh wholemeal wheat breads are investigated. In addition, the impact of the exogenous fungal phytase on the phytate content was also determined. Results showed that breadmaking technology significantly affected the quality parameters of wholemeal breads (specific volume, moisture content, crumb and crust colour, crumb texture profile analysis and crust flaking) and frozen storage affected to a different extent the quality of the loaves obtained from partially baked breads and those obtained from frozen dough, particularly crust flaking. Freezing and frozen storage of wholemeal bread in the presence of fungal phytase decreased significantly the phytate content in whole wheat breads. The combination of fungal phytase addition, breadmaking process and frozen storage could be advisable for overcoming the detrimental effect of bran on the mineral bioavailability.     

Reduction in the Levels of Phytate During Wholemeal Bread Making; Effect of Yeast and Wheat Phytases

No difference in wheat phytase activity was observed when different types of acid were used to adjust the pH of wholemeal wheat flour suspensions to pH 5·0, the optimum for wheat phytase. When whole wheat bread was made without additives or after adjustment of the dough pH with acetic acid or lingonberry (traditional ingredients in bread making in Sweden), 64%, 96% and 83%, respectively, of the initial phytate was hydrolysed. A small but significant difference between breads with and without yeast or with deactivated yeast was found, indicating that yeast contributed some phytase activity under the conditions of bread making (pH 5·3–5·8 and 30–37°C). The optimum pH of yeast phytase was found to be 3·5. The isomers of IP₅formed with purified wheat phytase or yeast phytase were studied using sodium phytate as substrate. Wheat phytase formed 1,2,3,4,5-IP₅whereas yeast phytase formed 1,2,4,5,6-IP₅. Determination of the isomers of inositol pentaphosphate demonstrated that the reduction in phytate levels in bread compared with wholemeal flour resulted from both wheat and yeast phytase activities.     

The influence of fermentation processes and cereal grains in wholegrain bread on reducing phytate content

Wholegrain bread is generally thought of as being more healthy than white bread due to it having a higher content of dietary fibre, vitamins (especially vitamin B and E) and many important minerals. However, wholegrain bread also contains high levels of phytate (myo-inositolhexakisphosphate, InsP-6) which may bind desirable nutrients, preventing their absorption in the gut and thereby reducing the nutritional value of the end product. In order to evaluate factors influencing phytate levels, the effects of fermentation and selected wholemeal flours from rye, oats and wheat were investigated. Phytate levels were assessed using a spectrophotometric assay based on the measurement of iron with 2,2′-bipyridine. Phytate decreased in freshly ground wholegrain flour dough during the fermentation process with time of fermentation being the most important factor. Fermentation temperature was found to make only a small difference to the process of phytate reduction. Since the potential benefits of wholemeal breads incorporating various grains (e.g. oats and rye) are increasingly evident, this research has important implications for human health.     

燕麦粉对强筋面粉品质特性及其面包品质的影响

面包逐渐成为中国人营养早餐的选择,但面包中膳食纤维含量较低。燕麦是一种食疗兼备的特色杂粮作物,富含膳食纤维。为拓宽燕麦的应用范围、提高面包的营养价值,以优质强筋小麦品种藁优2018和燕麦粉为材料,研究了燕麦粉对小麦面粉面团流变学特性及淀粉糊化特性的影响,并进行了燕麦面包实验室制作和质构分析。结果表明,随着燕麦粉添加比例的增加,面团吸水率逐渐增加,面团稳定时间和粉质质量指数先减小后增加;面团拉伸能量、拉伸长度、拉伸阻力、最大拉伸阻力均逐渐减小。说明燕麦粉对面团拉伸特性各参数均有弱化作用。在藁优2018小麦面粉中添加10%的燕麦粉,既能保证面包的感官品质,又能满足面包营养最大化。     

Volume and texture improvement of gluten-free bread using quinoa white flour

Patients suffering from coeliac disease have to avoid traditional cereals-based products and depend on the availability of gluten-free alternatives. The gluten-free bread matrix and its foam stability are strongly affected by the choice of ingredients. In this study, the impact of quinoa white flour on bread quality parameters, in particular volume, has been investigated. The pseudocereal proved to be a suitable substrate for dough aeration using yeast, since considerably more glucose and a higher activity of α-glucosidase were found in comparison to rice and corn flour. Consequently, quinoa white flour was used to replace 40–100% of the rice and corn flour in a gluten-free control recipe. As a result, quinoa white flour enhanced the specific volume by 33%, which was related to the absence of bran components and the increased α-glucosidase activity. The significance of the latter was proven by separately adding sucrose and fungal amyloglucosidase to the control recipe. Moreover, the crumb featured homogeneous and finely distributed gas bubbles and the taste was not compromised. Thus, it was possible to improve the quality of gluten-free bread by using quinoa white flour, which might be a relief for coeliac patients.     

Effect of extrusion cooking of sorghum flour on rheology,morphology and heating rate of sorghum–wheat composite dough

Addition of a gluten-free flour such as sorghum has negative impact on the quality of wheat dough for bread making. One of the methods which can be used to promote the quality of sorghum-wheat composite dough is to extrude the sorghum flour before incorporation. In this regard, to produce a dough with appropriate bakery properties sorghum flour was extruded at 110 °C and 160 °C die temperature with 10%, 14% and 18% feed moisture. The effect of extruded sorghum flour incorporation (10%) on rheological (farinography and stress relaxation behavior), morphological and temperature profile of sorghum-wheat composite dough were evaluated. Extrusion cooking altered the sorghum-wheat composite dough properties through partial gelatinization of starch granules. Addition of extruded sorghum flour increased the water absorption and dough development time but it decreased the dough stability. Native sorghum-wheat composite dough showed viscoelastic liquid-like behavior whereas addition of sorghum flour extrudate changed dough to a more viscoelastic solid-like structure. Maxwell model was more appropriate than Peleg model to describe the viscoelasticity of the sorghum-wheat composite dough. Extrusion cooking decreased composite dough elasticity and viscosity. Sorghum extrudate increased the heating rate of composite dough crumb during baking. Addition of extruded sorghum flour formed a non-uniform and less compact dough structure. As a result, dough containing extruded sorghum flour had a good potential for producing a high-yielding bread in a short time of baking.     

Evaluation of the rheological properties of dough and quality of bread made with the flour obtained from old cultivars and modern breeding lines of spelt (Triticum aestivum ssp. spelta)

This work evaluates rheological properties of dough and quality of bread prepared from the flour of ancient varieties and modern breeding lines of spelt compared to common wheat. Spelt flours of old varieties exhibited similar water absorption; the largest was noted in the STH-8 line flour. Spelt doughs had longer development time and were more stable than wheat dough. The doughs made of old spelt varieties were more resistant to extension than that produced from new lines flours. Of the spelt breads, this of the STH-8 line spelt line had the largest loaf volume but smaller than wheat bread. In addition, spelt doughs had similar porosity; the most porous was the bread baked from the Frankenkorn cv, Schwabenkorn cv and STH-8 line flours. Moreover, the crumb of the bread manufactured from the flours of spelt variety Frankenkorn and the STH 28-4614 line showed the greatest resistance to compression and the smallest compressibility.     

Properties of bread made from frozen dough containing waxy wheat flour

The quality of bread made from frozen dough is diminished, and staling rate is increased by changes that occur during freezing and storage. New cultivars of waxy wheat flour (WWF), containing higher levels of amylopectin, may help improve the quality of baked products. Bread quality and staling were investigated for bread containing 0–45% WWF and 55–65% water after freezing and 90-day frozen storage. The specific volume was highest with 15% WWF substitution and 60% water in bread made from both unfrozen and frozen dough. With higher levels of WWF and lower water content, bread staling rates decreased. Bread with higher levels of WWF were darker and had greater color variation. ¹H NMR studies showed that bread with greater WWF and water had higher transverse relaxation (T₂) times (9–11 ms), but less change in T₂ during storage. This research demonstrated that specific combinations of WWF and water produced a better quality of bread after dough freezing.     

Dough and bread made from high- and low-protein flours by vacuum mixing: Part 2. Yeast activity,dough proofing and bread quality

The combined effects of reduced mixer headspace pressure and mixing duration on the yeast activity, proofing and quality of dough and bread made from both high-protein flour (HPF) and low-protein flour (LPF) were addressed in this study. Rheofermentometer analysis showed that a reduction in mixer headspace pressure up to 0.08 MPa did not affect the overall gassing power of yeast in either of the two dough matrices. An increase in mixing duration sped up the mass transfer rate of CO₂ at the initial stage of fermentation, leading to a faster expansion of dough volume at the beginning. Moreover, an increase in mixing time promoted dough development and gas inclusion, which resulted in a increased volume of dough and bread, as well as a softer texture of both baked bread and steamed bread. In general, reduced headspace pressure produced baked bread of smaller volume, denser structure and harder texture. On the other hand, vacuum mixing produced steamed bread with softer texture without significantly changing the bread’s volume and porosity.     

Mechanical Properties of Bread Crumb Prepared from Flours of Different Dough Strength

Bread quality depends in part on the textural properties of the crumb; softness and strength being two important textural attributes. This study examined differences between instrumentally-measured textural properties of the crumb of bread made from two flours; one possessing extra strong dough mixing characteristics and a second of moderate strength (red spring wheat). Bread crumb specimens, notched and un-notched, were subjected to tensile loading and the crumb's initial (elastic) modulus, stress at failure (crumb strength) and tear resistance were determined. The same mechanical parameters were determined on bread crumb that had been compressed approximately five-fold in order to destroy crumb structure. For un-notched specimens, stiffness and strength were of the order of 11 and 1 kN/m², respectively, whereas after compression they were 230 and 10 kN/m², respectively. For CWRS breadcrumb, toughness increased from 4·1 J/m²to 12·3 J/m²following crumb compression. Bread crumb made from a flour possessing extra strong dough properties was stronger than bread crumb made from a more conventional red spring wheat flour, and there was an indication that extra strong flour bread crumb specimens were stiffer. Compression of the bread crumb lessened the difference between the mechanical properties of the two bread types, particularly for strength and tear resistance. The results indicated that bread crumb structure plays a predominant role in the textural properties of bread crumb.     

Properties of bread made from frozen dough containing waxy wheat flour

The quality of bread made from frozen dough is diminished, and staling rate is increased by changes that occur during freezing and storage. New cultivars of waxy wheat flour (WWF), containing higher levels of amylopectin, may help improve the quality of baked products. Bread quality and staling were investigated for bread containing 0–45% WWF and 55–65% water after freezing and 90-day frozen storage. The specific volume was highest with 15% WWF substitution and 60% water in bread made from both unfrozen and frozen dough. With higher levels of WWF and lower water content, bread staling rates decreased. Bread with higher levels of WWF were darker and had greater color variation. ¹H NMR studies showed that bread with greater WWF and water had higher transverse relaxation (T₂) times (9–11 ms), but less change in T₂ during storage. This research demonstrated that specific combinations of WWF and water produced a better quality of bread after dough freezing.     

Whole wheat bread: Effect of bran fractions on dough and end-product quality

Consumption of whole-wheat based products is encouraged due to their important nutritional elements that benefit human health. However, the use of whole-wheat flour is limited because of the poor processing and end-product quality. Bran was postulated as the major problem in whole wheat breadmaking. In this study, four major bran components including lipids, extractable phenolics (EP), hydrolysable phenolics (HP), and fiber were evaluated for their specific functionality in flour, dough and bread baking. The experiment was done by reconstitution approach using the 2⁴ factorial experimental layout. Fiber was identified as a main component to have highly significant (P < 0.05) and negative influence on most breadmaking characteristics. Although HP had positive effect on farinograph stability, it was identified as another main factor that negatively impacted the oven spring and bread loaf volume. Bran oil and EP seemed to be detrimental to most breadmaking characteristics. Overall, statistical analysis indicates that influence of the four bran components are highly complex. The bran components demonstrate multi-way interactions in regards to their influence on dough and bread-making characteristics. Particularly, Fiber appeared to have a high degree of interaction with other bran components and notably influenced the functionality of those components in whole wheat bread-making.     

Effect of the addition of extruded wheat flours on dough rheology and bread quality

Extruded wheat flours, due to their increased water absorption capacity, constitute an opportunity to increase bread output in bakery production. However extrusion may modify dough and bread characteristics. The aim of this study was to investigate the effect of the substitution of 5% of the wheat flour by extruded wheat flour (produced with different time-temperature extrusion treatments) on dough mixing, handling and fermentation behaviour and bread volume, shape, texture and colour. The RVA curves indicate that extrusion intensity increases with increasing temperature or water content. Water absorption capacity rises with increasing treatment intensity, but dough stability tends to decrease. Adding extruded flours decreases dough extensibility but increases tenacity and gas production. Differences in dough structure were observed on photomicrography, though there were no clear differences in bread quality. These results indicate that it is possible to obtain adequate dough and bread characteristics using dough with 5% extruded wheat flour.     

Crucial role of amylose in the rising of gluten- and additive-free rice bread

Gluten- and additive-free rice bread is suitable for consumption by individuals who are sensitive to gluten and prefer to avoid additives. Here, we prepared 100% rice bread, which is a gluten-free rice bread prepared in the absence of additives, using 19 rice flour samples containing amylose contents ranging from 9.6 to 22.3%. The amylose content was positively correlated with the specific volume of the 100% rice bread, whereas no correlation was observed between the protein content and the specific volume. The amylose content was also positively correlated with the specific volume of gluten-free rice bread prepared following protease treatment of the dough. The dough of 100% rice bread prepared from rice flour containing higher amylose contents was better stabilized during leavening than that prepared from rice flour containing a lower amylose content. It was therefore apparent that amylose plays an important role in the preparation of 100% rice bread with a high loaf volume through stabilization of the dough.     

Low moisture milling of wheat for quality testing of wholegrain flour

The objective of this study was to produce wholegrain wheat flour on a laboratory-scale with particle size distributions similar to commercially-milled samples without re-milling the bran. The moisture contents of four hard winter wheat cultivars were adjusted to 7.29–7.98% (by drying), 9.00–10.6% (“as is”), and 15.6% (by tempering) prior to milling into wholegrain flour. The moisture treatments appeared to affect the partitioning of wholegrain flour particles into each of three categories: fine (<600 μm), medium (600–849 μm) and coarse (≥850 μm). When the distributions of particles were grouped into these categories, wholegrain flours made from dried and “as is” wheat fell within the values for commercial wholegrain flours, while that from tempered wheat contained more coarse particles than even the coarsest commercial wholegrain flour. Loaf volumes and crumb firmness were not significantly different between bread made from wholegrain flour that had been produced from dried or “as is” wheat, but loaf volume was significantly lower and bread crumb firmness was significantly higher when wholegrain flour from tempered wheat was used. These results show that wheat may be milled without tempering to produce wholegrain flour with particle size similar to some commercially-milled flours without needing to re-grind the bran.     

Low moisture milling of wheat for quality testing of wholegrain flour

The objective of this study was to produce wholegrain wheat flour on a laboratory-scale with particle size distributions similar to commercially-milled samples without re-milling the bran. The moisture contents of four hard winter wheat cultivars were adjusted to 7.29–7.98% (by drying), 9.00–10.6% (“as is”), and 15.6% (by tempering) prior to milling into wholegrain flour. The moisture treatments appeared to affect the partitioning of wholegrain flour particles into each of three categories: fine (<600 μm), medium (600–849 μm) and coarse (≥850 μm). When the distributions of particles were grouped into these categories, wholegrain flours made from dried and “as is” wheat fell within the values for commercial wholegrain flours, while that from tempered wheat contained more coarse particles than even the coarsest commercial wholegrain flour. Loaf volumes and crumb firmness were not significantly different between bread made from wholegrain flour that had been produced from dried or “as is” wheat, but loaf volume was significantly lower and bread crumb firmness was significantly higher when wholegrain flour from tempered wheat was used. These results show that wheat may be milled without tempering to produce wholegrain flour with particle size similar to some commercially-milled flours without needing to re-grind the bran.