Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

In vitro regeneration of <Emphasis Type="Italic">Populus tomentosa</Emphasis> from petioles

A reliable in vitro regeneration procedure for Populus tomentosa is a prerequisite for its trait improvement through genetic transformation. We established a systematic protocol for indirect regeneration of P. tomentosa using in vitro petioles of Chinese poplar cultivar ‘fasta-3’. A high frequency of callus induction (>97 %) was obtained from isolated petioles cultured on the modified 1/2MS basal medium supplemented with 0.5 mg/L ZT and 1.0 mg/L NAA, and the tested calli were subsequently plated on 1/2MS basal medium supplemented with 0.25 mg/L BA, 0.25 mg/L ZT, 0.25 mg/L NAA, 0.01 mg/L TDZ, and 0.5 mg/L KT for efficient regeneration of shoots after being cultured for 6 weeks. The regenerated shoots were vigorously rooted on the tested media supplemented with 1.0 mg/L IBA and 0.5 mg/L NAA. These results can facilitate genetic transformation of P. tomentosa for trait improvements in future.     

Comparison and early selection of new clones in <Emphasis Type="Italic">Populus tomentosa</Emphasis>

In our study, two experimental plantations, respectively, with 24 and 32 new clones of P tomentosa, were established in Weixian County, Hebei Province and Wuzhi County, Henan Province using a completely randomized block design. A comparative study was conducted on the continuous 5-year-old height and diameter at breast height （DBH） of new clones in the two plantations. As well, based on genetic correlation over the years of testing of these clones, a preliminary study of early selection was carried out. Results indicate that the growth traits of the new clones in Weixian were better than those in Wuzhi. The traits show weak correlation between the two plantations. In some stands, the height, DBH and seedling volume of 5-year-old clones presented statistically significant differences among clones. In both plantations, the new clones showed over 0.6 repeatability of height, DBH and volume, as well as larger coefficients of variation （CV）. The fact that these clones achieved the largest repeatability and CV in the second year suggests that these traits are highly controlled by heredity. Thus, based on the growth traits of the second year, the new clones B305, B307, B303, H75, BT18, BT17 and 21J-1 were considered suitable in Weixian. In Wuzhi, the new clones had variable repeatability and CVs in various years and their correlation of growth traits among different years was not high. We conclude that early selection of new clones was not feasible in Wuzhi.     

Establishment of cell suspension line of <Emphasis Type="Italic">Populus tomentosa</Emphasis> Carr.

Leaves of fine Populus tomentosa genotype TC152 were used as explants to establish cell suspension lines. The effects of plant growth regulators on callus induction and establishment of cell suspension lines were studied. The callus induction rate was the highest on a MS solid medium supplemented with 1.0 mg·L^-1 2,4-D. A cell suspension line could be obtained by inoculating calli which were not subcultured into a MS liquid medium supplemented with 1.5 mg·L^-1 2,4-D. The best subculture medium was MS ＋ 0.8 mg＇L-1 2,4-D ＋ 30 g·L^-1 sucrose with a subculture cycle of seven days.     

Feeding performance of <Emphasis Type="Italic">Clostera fulgurita</Emphasis> on three clones of <Emphasis Type="Italic">Populus deltoides</Emphasis>

Poplar leaf defoliator, Clostera fulgurita (Walker) larvae were reared on three Populus deltoides clones (PL1, PL5 and PL7) in the laboratory. The nutritional indices were computed for working out the relationship between food consumption and growth rate of 3rd, 4th and 5th instar larvae on three clones. The result showed that the consumption index (CI), approximate digestibility (AD), growth rate (GR), relative growth rate (RGR) and efficiency of conversion of ingested food (ECI) decreased with the increase in the age of the larvae. Efficiency of conversion of digested food (ECD) increased with increase in age of the larvae. GR and RGR varied significantly, indicating that larval development was enhanced on PL1 as compared to PL5 & PL7. The values of AD, ECI and ECD were not affected by the different clones. Feeding and growth indices could be useful to define a defoliation prediction model.     

Study on the changes in surface characteristics of <Emphasis Type="Italic">Populus tomentosa</Emphasis> due to thermo-hydro-process

The effects of high temperature, moisture, and mechanical action during the thermo-hydro-mechanical (THM) processing, on the changes in surface properties of poplar, namely, surface color, roughness, wettability, and microstructure, were investigated in this study. The correlation between observed changes in surface properties and chemical characteristics was also analyzed. Poplar woods with high moisture content were compressed using different pressures at temperature of 160 °C for four different periods. The wood surfaces became darker and smoother, and their surface free energy decreased significantly after the THM process. THM process markedly reduced surface hygroscopicity compared to the control wood. The cell lumens of THM wood became narrow with increasing compression ratio due to the enhancing high pressure. Collapse and fractures of cell walls developed during THM treatment. Furthermore, results indicated that a series of chemical reactions in different components of wood took place during THM process, such as degradation of hemicelluloses, condensation of lignin, and decomposition of extractives. In turn, these chemical modifications contributed to the darkening of color as well as the reduction of wettability and surface free energy of THM wood.     

Bioremediation of CCA-treated wood by brown-rot fungi <Emphasis Type="Italic">Fomitopsis palustris</Emphasis>, <Emphasis Type="Italic">Coniophora puteana</Emphasis>, and <Emphasis Type="Italic">Laetiporus sulphureus</Emphasis>

This study evaluated oxalic acid accumulation and bioremediation of chromated copper arsenate (CCA)-treated wood by three brown-rot fungi Fomitopsis palustris, Coniophora puteana, and Laetiporus sulphureus. The fungi were first cultivated in a fermentation broth to accumulate oxalic acid. Bioremediation of CCA-treated wood was then carried out by leaching of heavy metals with oxalic acid over a 10-day fermentation period. Higher amounts of oxalic acid were produced by F. palustris and L. sulphureus compared with C. puteana. After 10-day fermentation, oxalic acid accumulation reached 4.2 g/l and 3.2 g/l for these fungi, respectively. Fomitopsis palustris and L. sulphureus exposed to CCA-treated sawdust for 10 days showed a decrease in arsenic of 100% and 85%, respectively; however, C. puteana remediation removed only 18% arsenic from CCA-treated sawdust. Likewise, chromium removal in F. palustris and L. sulphureus remediation processes was higher than those for C. puteana. This was attributed to low oxalic acid accumulation. These results suggest that F. palustris and L. sulphureus remediation processes can remove inorganic metal compounds via oxalic acid production by increasing the acidity of the substrate and increasing the solubility of the metals.An erratum to this article can be found at     

Constitutive expression of sense &; antisense <Emphasis Type="Italic">PtAP3</Emphasis>, an <Emphasis Type="Italic">AP3</Emphasis> homologue gene of <Emphasis Type="Italic">Populus tomentosa</Emphasis>, affects growth and flowering time in transgenic tobacco

To analyze the function of PtAP3, an APETALA3 （AP3） homologue gene isolated from Populus tomentosa Carr., the full length sequence （1797 bp） and a fragment （870 bp） of PtAP3 were fused to a CaMV 35S promoter of pBI121 to generate the sense and antisense constructs of PtAP3. These constructs were transformed into tobacco by Agrobacterium infection of leaf disks and selection on kanamycin medium. Some sense and antisense transgenic tobacco plants were obtained by PCR and Southern blot analysis. Great phenotypic differences in transgenic tobacco plants were observed. Almost all of sense PtAP3 to transgenic tobaccos showed a higher growth rate than those of antisense transformants and a few developed pregnancy earlier than wild type seedlings and antisense transformants under the same conditions.     

Insecticidal properties of <Emphasis Type="Italic">Thymus persicus</Emphasis> essential oil against <Emphasis Type="Italic">Tribolium castaneum</Emphasis> and <Emphasis Type="Italic">Sitophilus oryzae</Emphasis>

Red flour beetle Tribolium castaneum (Herbst) and rice weevil Sitophilus oryzae (L.) are considered to be the major insect pests in storage. Essential oils from aromatic plants are recognized as proper alternatives to fumigants. Thymus persicus (Ronniger ex Rech. f.) is one of these plants that have medicinal properties and is indigenous to Iran. The essential oil was obtained from aerial parts of the plant and analyzed by GC and GC–MS. Carvacrol (44.69%) and thymol (11.05%) were the major constituents of the oil extracted. In this experiment, fumigant toxicity of the essential oil was studied against T. castaneum, S. oryzae at 27 ± 1°C and 60 ± 5% RH in dark condition. The adult insects were exposed to the concentrations of 51.9, 111.1, 207.4 and 370.4 μl/l air to estimate median lethal time (LT₅₀) values. The fumigant toxicity was increased in response to increased essential oil concentrations. The LT₅₀ values at the lowest and the highest concentrations tested were ranged from 28.09 to 13.47 h for T. castaneum, and 3.86 to 2.30 h for S. oryzae. It was found that S. oryzae adults were much more susceptible to the oil than T. castaneum. After 24 h of exposure, the LC₅₀ values (95% fiducial limit) for T. castaneum and S. oryzae were estimated to be 236.9 (186.27–292.81) and 3.34 (2.62–4.28) μl/l air, respectively. These results suggest that T. persicus essential oil merits further study as potential fumigant for the management of these stored-product insects.     

Enzymatic saccharification and ethanol production of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">Paraserianthes falcataria</Emphasis> wood,and <Emphasis Type="Italic">Elaeis guineensis</Emphasis> trunk

We examined the saccharification and fermentation of meals from Acacia mangium wood, Paraserianthes falcataria wood, and Elaeis guineensis trunk. The levels of enzymatic hydrolysis of cellulose and ethanol production were highest for P. falcataria wood and lowest for A. mangium wood. Ultrasonication pretreatment of meal further increased the rates of hydrolysis and ethanol production in meal from P. falcataria wood. Through this pretreatment, hemicelluloses (xylan and xyloglucan) and cellulose were released in the meal from P. falcataria wood. Loosening of hemicellulose associations can be expected to make P. falcataria wood more useful for bioethanol production.     

Reaction wood drying kinetics: tension wood in <Emphasis Type="Italic">Fagus sylvatica</Emphasis> and compression wood in <Emphasis Type="Italic">Picea abies</Emphasis>

The drying kinetics of reaction woods in Picea abies (compression wood) and Fagus sylvatica (tension wood) in comparison with their corresponding normal woods was investigated under constant convective drying conditions. Moisture profiles along the thickness of small flat-sawn boards taken from reaction and opposite wood zones were evaluated using a polychromatic X-ray system, a non-destructive method. The results revealed substantial differences in the drying behavior between the reaction and opposite woods. Both reaction woods represented slower drying rate than their matching normal woods mainly during the period of free water loss. However, the reaction and opposite woods reached the final moisture content (MC) of about 12% at the same time due to higher initial MC in the opposite woods. In the case of reaction wood, it took a longer time for the moisture profile to become approximately uniform. Overall, a more striking difference was observed in the drying behavior of compression and opposite wood in P. abies. Some important anatomical differences like the cell and pit dimensions and their proportion give some explanations for these drying behaviors.     

Resistance of wood from black pine (<Emphasis Type="Italic">Pinus nigra</Emphasis> var. <Emphasis Type="Italic">austriaca</Emphasis>) against weathering

At present tapped wood of black pines (Pinus nigra var. austriaca) is mainly combusted. The priority of material use over thermal recycling has led to some considerations regarding the utilization of tapped wood. The high content of extractives suggests a higher natural durability, and therefore, the suitability for outdoor applications. Tapped and not tapped wood boards from black pine (sapwood and heartwood) were subjected to weathering tests to find out its resistance against abiotic stress. Additionally tapped wood particles with a high content of resin were exposed to weathering and to composting. Weathering caused roughness to increase. Infrared spectral characteristics revealed the differences before and after tapping and weathering. Principal component analyses supported the grouping according to the chemical changes. In heartwood the lignin band at 1510 cm^??1 disappears and the typical resin band at 1688 cm^??1 decreases considerably. The lignin band of resinous parts is affected neither by weathering nor by composting. However, the resin band shows an intensity decrease and broadening due to weathering and disappears during composting.     

Model of leaf energy distribution and its experimental validation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> Carr.

Leaf temperature of a plant is the result of heat transfer between the plant and its environment. There are many factors that can affect leaf temperature, such as the solar radiation energy, environmental temperature, wind velocity, evaporation on the leaf surface, photosynthesis, respiration and so on, which have different effects on the temperature of leaves. In first instance, we analyzed the heat transfer on leaves of Populus tomentosa Carr. theoretically and constructed a model of energy distribution. We then validated the model by analyzing seven different kinds of one-year-old P. tomentosa leaves experimentally. The result shows that solar radiation is the main energy input and the dominant ways of thermal diffusion are heat transfer between the upper and lower leaf surfaces and evaporation from the leaf surface.     

Fluorescein-labeled wheat germ agglutinin stains the pine wood nematode, <Emphasis Type="Italic">Bursaphelenchus </Emphasis><Emphasis Type="Italic">xylophilus</Emphasis>

Pine wilt disease, caused by the pine wood nematode (PWN, Bursaphelenchus xylophilus), is a major threat to pine forests throughout East Asia. Nonetheless, its mechanism of invasion has not yet been described in detail. To better understand the pathology of this disease, it is important to examine the distribution of PWNs within pine tissue during the course of disease development. We attempted to stain nematodes with fluorescein-conjugated wheat germ agglutinin (F-WGA) as a means to locate and track the spread of PWNs. Although PWNs proliferated on Botrytis cinerea fungus were successfully stained only on their vulvas and spicule holes, PWNs extracted from inoculated Pinus thunbergii seedlings were stained on their surface. Stainability, or the percentage of PWNs stained with F-WGA over more than half of their surface, was about 20% by 1 day after inoculation, but increased to 80% at 10 days. The stainability of PWNs extracted from a 5-cm main stem segment that included the inoculation site was less than that of PWNs extracted from other parts of the main stem farther away (i.e., those that had dispersed). These results suggest that stainability is related to dispersal activity in time. Thus, to raise the stainability of PWNs at shorter timeframes after inoculation, PWNs with more than 80% stainability were re-inoculated into pine seedlings. This resulted in more than 70% stainability from 1 to 6 days after inoculation. In F-WGA stained thin paraffin sections of pine tissue of re-inoculated seedlings, PWNs brightly fluoresced under epifluorescence and were easily detected against the dark background of pine tissue. This staining technique with F-WGA is an excellent tool for detecting PWNs in pine tissue.     

<Emphasis Type="Italic">Bursaphelenchus mucronatus</Emphasis> (Nematoda: Aphelenchoididae) vectored by <Emphasis Type="Italic">Monochamus </Emphasis><Emphasis Type="Italic">urussovi</Emphasis> (Coleoptera: Cerambycidae) in Hokkaido,Japan

Bursaphelenchus mucronatus Mamiya et Enda has been recovered for the first time from adults of the cerambycid beetle, Monochamus urussovi (Fischer), in Hokkaido, Japan. The nematode was also recovered from the inner bark of Picea jezoensis (Siebold et Zuccarini) Carrière and Abies sachalinensis (Fr Schmidt) Masters infested with M. urussovi larvae. PCR–RFLP analysis indicated that B. mucronatus in Hokkaido is the European type.     

Radial variations of wood properties of an endangered species, <Emphasis Type="Italic">Pinus armandii</Emphasis> var. <Emphasis Type="Italic">amamiana</Emphasis>

A dead tree of Pinus armandii Franch. var. amamiana (Koidz.) Hatusima (abbreviated to PAAm) was obtained from a natural habitat on Tanega-shima Island and various properties of its wood were investigated. Grain angle was measured and soft X-ray analysis was undertaken to obtain the density in each annual ring. Unit shrinkage and dynamic properties were measured by shrinkage, bending, and compression tests. Variations of wood properties in the radial direction, relationships of wood properties to density, and annual ring width were examined. Roughly speaking, variations in the radial direction of the grain angle, twist angle by drying, Young’s modulus and strength in static bending, absorbed energy in impact bending, compressive Young’s modulus, compressive strength, and compressive proportional limit corresponded to the variation of annual ring width. As a result, it was determined that if PAAm is afforested artificially for the purposes of lumber production and conservation, the annual rings of logs should not be too widely spaced. Wood properties of PAAm were similar to those of Japanese black pine (Pinus thunbergii Parl.), which is another representative pine on Tanegashima Island. This study was presented in part at the 56th Annual Meeting of the Japan Wood Research Society, Hiroshima, August 2007     

Effectiveness of Neem (<Emphasis Type="Italic">Azadirachta indica</Emphasis>) insecticides against Brassica pod midge (<Emphasis Type="Italic">Dasineura brassicae</Emphasis> Winn<Emphasis Type="Italic">.</Emphasis>)

The efficiency of the botanical insecticide (BI) NeemAzal T/S (containing 1% Azadirachtin A), on the basis of azadirachtin applied in a dose of 20 g a.i. ha⁻¹ against Brassica pod midge (Dasineura brassicae), has been monitored for 4 years. The biological efficiency of BI was compared with the efficiency of some synthetic insecticides. It was ascertained that BI was very efficient in decreasing the number of damaged oilseed rape pods (ranging from 56.5 to 85.9% compared to untreated plants) and its efficiency was comparable with synthetic insecticides based on Chloronicotinyl (Thiacloprid) and Neonicotinoid (Acetamiprid). BI’s efficiency was, in some years, even significantly higher compared to pyrethroid (λ-cyhalothrin). The high biological efficiency of azadirachtin that we ascertained was significantly reflected in increasing potential crop yields. The yield increase of azadirachtin ranged between 9.3 and 19.4% compared to the control sample. Azadirachtin showed the highest yield for the whole time of experimentation, and in some years the yield increase was significantly higher compared to some synthetic agents.     

High level expression of glucose-6-phosphate dehydrogenase gene <Emphasis Type="Italic">PsG6PDH</Emphasis> from <Emphasis Type="Italic">Populus suaveolens</Emphasis> in <Emphasis Type="Italic">E. coli</Emphasis>

In order to investigate the functions of the gene PsG6PDH and the mechanisms underlying freezing tolerance of Populus suaveolens, the recombinant expression vector pET-G (pET30a-G6PDH), which contained full encoding region of PsG6PDH gene, was established. The recombinant was identified by lawn-PCR and double enzyme digestion and then transformed into expression host XA90 and induced by isopropyl-â-D-thiogalactoside (IPTG) to express 100 kD polypeptide of G6PDH fusion protein. The results showed that the expressed amount of the fusion protein culminated after 1 mmol&#8226;L^–1 IPTG treatment for 4 h and that pET-G product was predominately soluble and not extra-cellular secreting.     

Experimental study on characteristic curves of restoring forces of <Emphasis Type="Italic">Populus alba</Emphasis> var. <Emphasis Type="Italic">pyramidalis</Emphasis>

Static tests under cyclic loading were carried out on Populus alba var. pyramidalis to determine its characteristic curves of     

Cultivation of <Emphasis Type="Italic">Pleurotus eryngii</Emphasis> on umbrella plant (<Emphasis Type="Italic">Cyperus alternifolius</Emphasis>) substrate

Mycelial growth and mushroom yields of three strains of Pleurotus eryngii produced on wheat bran-supplemented umbrella plant (Cyperus alternifolius) substrate were assessed using surface brightness, bromophenol blue color reactions, ergosterol and glucosamine contents, and water potential as indicators of strain performance. Mycelial growth was 31%–46% greater, depending on strain, on the umbrella plant substrate compared with the mushroom industry standard sugi (Cryptomeria japonica) substrate. Mushroom yields on the first flush were 20%–23% higher, depending on strain, on the plastic bottle-contained umbrella plant substrate. However, yields on the second break were lower from the umbrella plant substrate. Because many growers in Japan only harvest one flush, production of P. eryngii on umbrella plant substrate may offer commercial producers an alternative basal ingredient to diminishing supplies of sugi sawdust.Part of this report was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002.