Properties of anti-UV-finished cotton fabrics cured by blue light irradiation

To decrease the pollution discharge and energy consumption resulting from textile finishing using the conventional pad-dry-cure process, a blue light-curable digital finishing for textile was innovatively proposed. Based on the mechanism of blue light curing technique, a combination of the blue light curing process and anti-UV finishing was established in this study. A blue light-curable anti-UV finishing solution containing oligomers, monomers, photoinitiators, and anti-UV agents was padded onto the surface of the cotton fabrics, and then cured to form a tough film under blue light irradiation. The ultraviolet protection factor (UPF) value of the finished cotton fabrics was 50, the top level of international standards, demonstrating excellent UV resistance. The finished cotton fabrics also showed good rubbing and washing durability, and acceptable handle. The integration of an anti-UV finishing with the blue light curing technique presents some unique advantages in terms of environmental protection and application potential.     

Cotton fabric mechanical properties affected by post-finishing processes

Following the work done previously [1]. In this paper, the effect of various post-finishing agents on the low stress mechanical and surface properties of dyed cotton fabrics, as well as their handle value have been studied. The mechanical properties of the treated cotton fabrics were measured by the famous KES-FB system. It has been found that cotton fabric mechanical properties and fabric handle can be modified by not only the external finishing agents but also the internal finishing agents which are used for correcting the inherent defect of the fabrics. The results in this report will inform the textile industry in engineering required fabric properties with appropriate finishing processes.     

Antibacterial finishing of cotton fabrics using biologically active natural compounds

The paper discusses a method to functionalize cotton fabrics using biologically active natural compounds to achieve the antibacterial characteristics required for medical application. The biologically active natural compounds include propolis, beeswax, and chitosan. Three 100 % cotton knitted fabrics with different degrees of compactness were impregnated in the emulsions containing the active ingredients and fabric variant G3 with the highest degree of impregnation was considered for the evaluation of the antibacterial properties and comfort characteristics. The results show that the treated cotton fabric had high antibacterial activity against both gram positive bacteria Staphylococcus aureus and Streptococcus β haemolytic, and gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The presence of the biologically active natural compounds on the cotton substrates modified the surface of the textile fibers as seen in the SEM images. The treatment also improved fabric comfort properties, the cotton substrates became less air permissive and more hygroscopic after the treatment. The experimental results indicated that propolis, beeswax and chitosan can be applied as an emulsion to functionalize cotton textile materials. The antibacterial performance of the functionalized fabrics suggested that the cotton fabrics treated with those biologically active natural compounds have the potentials to be used in medical fields.     

Green Approach for Multifunctionalization of Cellulose-Containing Fabrics

Development of multifunctional textile and clothing products with improved environmental profiles has been demanded both by textile industry and by consumer. Herein, dialdehyde sodium alginate (DASA) and dialdehyde carboxymethyl cellulose (DACMC) have been prepared, characterized and utilized, as an eco-friendly binding/ macromolecular crosslinking/hand building agents, in functional finishing of cellulose-containing fabrics. Fabric samples were treated with the nominated dialdehyde polysaccharide (DAPS, 10 g/l) along with the reactant resin (DMDHEU, 50 g/l), Ag- or TiO₂-NPs as active ingredients (20 g/l) and ammonium persulfate catalyst (5 g/l) using the padding method. After functional finishing, the finished fabrics demonstrated a remarkable improvement in their antibacterial efficacy, UV-blocking ability, self-cleaning capacity, and surface roughness functionality without adversely affecting fabrics resiliency. The variation in these functional properties is affected by kind of DAPS, type of added nanoparticles as well as the treated substrate. Additionally, FTIR, SEM, EDS, and durability to wash measurements for selected samples were performed. Moreover, pre-oxidation of DAPS, functionalization reactions/interactions among the nominated reactants and the textile materials were also suggested.     

N-halamine-bonded cotton fabric with antimicrobial and easy-care properties

N-halamine precursor 2,2,6,6-tetramethyl piperidinol (TMP), a hindered amine light stabilizer, was bonded onto cotton fabric by using 1,2,3,4-butanetetracarboxylic acid (BTCA) as a crosslinking agent. A variety of treating conditions including TMP concentration, curing temperature and time, and catalyst were studied. The treated fabrics were characterized using FTIR spectra and scanning electron microscope (SEM). The cotton fabric treated with TMP precursor could be rendered biocidal upon exposure to dilute household bleach. The chlorinated cotton swatches showed great efficacy and inactivated 100 % of Staphylococcus aureus with 7.1 log reduction with 5 min of contact and 83.25 % of E. coli O157:H7 at 10 min of contact. In addition, the wrinkle recovery angle of the treated cotton fabrics increased from 229 ° of untreated cotton fabrics to 253 °. This study provided a practical finishing process to produce cotton fabrics with easy care and antibacterial functionalities at the same time.     

Double Protect Copper Nanoparticles Loaded on L-cysteine Modified Cotton Fabric with Durable Antibacterial Properties

In this work, we developed a new method that can achieve immobilization and protection of the Cu NPs coating on the cotton fabrics by a simple two-step impregnation method. Firstly, L-cysteine (Cys) was grafted onto cotton fabric via esterification with the hydroxyl groups of cellulose, then Cu NPs were introduced on the fabric surface in the presence of a protective reagent, citric acid. Due to the doubled stabilization acts of Cys and citric acid, the Cu NPs immobilized on the fabric surface showed an excellent antibacterial effect and outstanding laundering durability. As a result, the mean size of the Cu NPs coating on the cotton fabric is about 62.4 nm, and the modified cotton fabrics showed satisfactory antibacterial ability against both S. aureus and E. coli, which the bacterial reduction rates are all higher than 98 % even withstand 50 washing cycles. Therefore, this method to prepare antibacterial cotton fabrics showed great potential applications in socks, cosmetic, and medical textiles.     

Facile Fabrication of Durable Antibacterial Cotton Fabric Realized by Thioglycolic Acid and Silver Nanoparticles

In this study, durable antibacterial cotton fabrics were prepared by a simple two-step impregnation method. Firstly, thioglycolic acid (TGA) was grafted onto cotton fabric via esterification with the hydroxyl groups of cellulose, then silver nanoparticles (Ag NPs) were immobilized on the cotton fabric surface via coordination bonds with the TGA thiol groups. As a result, the mean size of Ag NPs coating on the cotton fabric is around 74 nm, and these functionalized cotton fabrics show superior antibacterial properties and excellent laundering durability. After withstand 50 laundering cycles, the obtained cotton fabrics still showed outstanding bacterial reduction rates (BR) against both S. aureus and E. coli, and the rates are all higher than 97 %. Therefore, this method to prepare antibacterial cotton fabric shows great potential applications in socks, cosmetic, and medical textiles.     

Layer by layer assembly of nanosilver for high performance cotton fabrics

High performance cellulosic fabrics are of increasing attention as a wearable fabric with special functions. The current report deals with preparation of multifunctional cotton fabrics by using simple and facile layer by layer technique. Firstly, silver nitrate was reacted with carboxymethyl cellulose to prepare Ag nanoparticles-carboxymethyl cellulose composite. Multi-layers of the so-obtained composite were applied on the cotton fabrics using pad-dry-cure method. Ag nanoparticles were deposited with mean size of 18.2 nm onto cotton fabrics which served as a cross linker between carboxymethyl cellulose macromolecules and cotton macromolecular blocks. Application of composite multilayers brought new properties for the finished cloths such like coloration, ultraviolet resistance, electrical resistance and biocidal action. The ultraviolet transmission radiation was significantly reduced to 7-10 % after applying ten composite layers. Valuable antibacterial textiles which are required in different medical purposes could be successfully produced, as excellent antibacterial activities were achieved by using the reported method. The developed process can be easily adapted to the existing textile machinery, making it industrially viable to produce fabric’s versatility.     

Improving Application Performance of <Emphasis Type="Italic">in situ</Emphasis> Polymerization and Crosslinking System of Maleic Acid/Itaconic Acid for Cotton Fabric

Maleic acid (MA) and itaconic acid (IA) used as crosslinking agents for cotton fabrics are more cost-effective than the most efficient nonformaldehyde crosslinker 1,2,3,4-butanetetracarboxylic acid (BTCA), but poor stability of finishing bath and fabric yellowing are the main disadvantage of MA/IA in situ polymerization and crosslinking system. In this research, the application performance improvement of MA/IA crosslinking system for cotton fabrics was studied. Replacement of the widely used sodium hypophosphite (SHP) with potassium hypophosphite (PHP) as catalyst allowed for obtaining a stable finishing bath under ambient temperature and led to improved final durable press (DP) performance of the treated fabrics. The influences of PHP concentration, curing temperature, and curing time on the performance of finished fabrics were investigated. Cotton fabrics treated by MA/IA/PHP crosslinking system exhibited comparable DP performance and laundering durability to that finished with BTCA. To address the fabric yellowing problem, the residual MA and IA attached on the treated fabrics by single-ended ester linkage was determined by HPLC. The data indicated that the degree of fabric yellowing was linearly related to the unpolymerized carboxylic acid MA and IA concentration on the treated fabrics. Several approaches were explored to improve the whiteness of MA/IA/PHP crosslinked fabrics. It was found that steam drying with 30-50 % humidity could effectively improve fabric whiteness. The findings of this study have significant implications for better application of unsaturated polycarboxylic acids in crosslinking of cellulose.     

An Eco-Friendly Multifunctional Nano-Finishing of Cellulose/Wool Blends

A new approach for an eco-friendly multi-functionalization of cotton/wool (C/W) and viscose/wool (V/W) blended fabrics was investigated. In this study, Ag-nanoparticle (Ag-NP) and/or ZnO-nanoparticle (ZnO-NP) functional agents were incorporated into the finishing bath along with citric acid (CA) or succinic acid (SA) as ester-crosslinking or esterifying agent, and sodium hypophosphite catalyst using the padding technique. The obtained results indicated that the extent of multi-functionalization expressed as antibacterial activity, UV-blocking functionality and wrinkle recovery ability were determined by kind of nanomaterial, nature of carboxylic acid, i.e., bi- or tri-functional and type of substrate. The results also demonstrated that blended fabrics finished with Ag-NP/ZnO-NP/CA/SHP nano-finishing formulation exhibited outstanding durable multi-functional properties even after 10 washing cycles. In addition, the change in surface morphology and the existence of Ag and/or Zn onto the selected V/W fabric surfaces have been confirmed by SEM and EDX analysis respectively.     

Durable antibacterial cotton modified by silver nanoparticles and chitosan derivative binder

This article focuses on the functional finishing of textiles using silver nanoparticles (AgNPs) and chitosan derivative binder, which was synthesized by a modification of chitosan using α-ketoglutaric acid. The binder covalently linked to cotton fabric via esterification of the hydroxyl groups on the cotton surface, and tightly adhered to surface of the AgNPs by coordination bonds. As a result, the coating of AgNPs on the cotton fabric showed excellent antibacterial property and laundering durability. After 30 consecutive laundering cycles, the Ag content on the fabrics decreased to 37.6 %, but the bacterial reduction rates against both S. aureus and E. coli were maintained over 95 %. It has potential applications in a wide variety of fields such as sportswear, socks, and medical textile.     

Preparation of Copper Nanoparticles Coated Cotton Fabrics with Durable Antibacterial Properties

When copper nanoparticles (Cu NPs) were applied as an antimicrobial agent to finish cotton fabrics, there are two issues should be solved: the oxidization and the weak adsorbability onto cotton fiber surface. In the present work, we developed a new method that can achieve both immobilization and protection of the Cu NPs at the same time. As an effective binder, thioglycolic acid (TGA) was covalently linked to cotton fiber surface via an esterification with the hydroxyl groups of cellulose, then Cu NPs were introduced on the fabric surface in the presence of a protective reagent, citric acid. Due to the doubled stabilization acts of TGA and citric acid, the Cu NPs immobilized on the fabric surface showed an excellent antibacterial effect and outstanding laundering durability. Even after 50 consecutive laundering tests, the modified cotton fabrics still showed satisfactory antibacterial ability against both S. aureus and E. coli, which the bacterial reduction rates are all higher than 96 %. It is believed that this methodology has potential applications in a wide variety of textile productions such as sportswear, socks, and medical textiles.     

Simultaneous application of silver nanoparticles with different crease resistant finishes

Textiles, especially those made of natural fibers, are suitable medium for the growth of microorganisms which causes disease transmission, stink, colorful spots, and reduction in fabric strength. This research focuses on the antimicrobial finishing of cotton fabrics using colloidal solution of silver nanoparticles. Due to the difficulties of adding a new step to the finishing process of cotton textiles, efforts have been made to combine the antimicrobial treatment with the conventional finishing processes. For this purpose two chemical finishes of Fixapret ECO as a crosslinking agent and Cellofix ME as a resin former have been used in anti crease finishing of cotton fabric and their effects were evaluated. The properties of the samples have been investigated by measuring the resistant of samples against bacteria, crease recovery angle, abrasion, and washing fastness. The results showed that treated samples by pad-dry method have the best antibacterial effect with a direct relation between the increase in drying temperature and antibacterial properties. However, the washing and abrasion fastness were not at the acceptable level. Co-application of the colloidal solution of silver nanoparticles with the crease resistant materials improved both fastness properties while at the same time limited the direct contact between the nanoparticles and the bacteria so the antibacterial efficiency was reduced. Subsequently, it was concluded that the antibacterial finishing method should be selected according to the end uses. In addition, antibacterial treatment could be one of the multi-purpose finishes for cotton fabric.     

New insight into compressive shrinkage finishing in a garment company: The effects on physical,mechanical and colorimetric properties of cotton woven fabrics

Compressive shrinkage or compressive shrinkage finishing is one of the most important finishing procedures in the textile industry to improve the dimensional stability of cotton fabrics. Study of the physical and mechanical properties of compressive shrinkage finished fabrics could be useful for optimizing the treatment conditions. This research was carried out in a production line of a recognized garment company on cotton woven fabrics with two different woven patterns (twill and plain). The samples were first dyed with reactive and sulfur dyes in a jigger dyeing machine and finished with a silicone softener. The dried fabrics were then processed in a compressive shrinkage machine. Several physical and mechanical properties of the samples were evaluated including area shrinkage, crimp percentage, thickness, abrasion resistance, drapeability, mechanical and colorimetric properties. The results showed that the thickness of all treated samples increased due to compressive shrinkage. The fabrics were analyzed with a Martindale Abrasion Tester to determine the abrasion resistance. Interestingly, we noted an increase in the abrasion resistance. After the compressive shrinkage process, the strength of the plain woven fabrics decreased in the warp direction, but increased for twill woven cotton fabrics. On the contrary, the strength of all samples increased in the weft direction. Colorimetric evaluation of the samples showed that the effect of compressive shrinkage on the color of all samples was negligible.     

Synthesis of ZnO nanoparticles by PNP and its application on the functional finishing of cotton fabrics

This paper presents a facile and novel approach for the synthesis of ZnO nanoparticles in aqueous solution based on a one-step reaction between a modified hyperbranched polymer (PNP) and zinc nitrate. The prepared ZnO nanoparticles polymeric hybrid was characterized and its antibacterial activity was investigated. The results indicated that the ZnO nanoparticles have an average size about 6 nm and well dispersed in aqueous medium. The minimum inhibitory concentration (MIC) of them was 20 ppm and 60 ppm against S. aureus and E. coli, respectively. For the functional finishing of cotton fabrics by these ZnO nanoparticles, a microwave assisted in situ fabrication method was employed. Scanning electron microscope (SEM), energy dispersive X-ray (EDX) spectroscopy and X-ray diffraction (XRD) measurements confirmed that the ZnO nanoparticles in situ generated in cotton fabrics successfully. Fourier transform infrared (FT-IR) spectroscopic investigation demonstrated that the ZnO nanoparticles were fixed on the cotton fibers by PNP. The treated cotton fabrics exhibited excellent UV protective properties and antibacterial activities. When ZnO content of cotton fabric was 1.49 %, the UPF value of treated cotton fabric exceeded 125 and the bacterial reduction rate against S. aureus and E. coli reached 99.97 % and 98.40 %, respectively.     

Durable antimicrobial cotton fabrics treated with a novel N-halamine compound

5,5-Dimethyl-3-((3’-triethoxysilylpropylamido)propyl)hydantoin (Si-Hy), a novel N-halamine precursor, has been synthesized in this work. The traditional pad-dry-cure process was used to coat the produced Si-Hy onto cotton fabrics. The coated fabric was characterized by SEM, FTIR and XPS. After exposure to chlorine bleach, the treated fabric presented good antimicrobial ability. The chlorinated sample demonstrated potent antibacterial ability against S. aureus (ATCC 6538) and E. coli O157:H7 (ATCC 43895) in brief contact time. Sixty seven percent of oxidative chlorine was retained and over 85 % of chlorine could be recharged after storage for 15 days and rechlorination. The antibacterial materials with good biocidal efficacies have potential applications in the healthcare industry.     

Synthesis of silver nanoparticles with sericin and functional finishing to cotton fabrics

This research presents a novel strategy to fabricate multi-functional cotton textiles. In this study, silver nanoparticles-sericin (Ag NPS-sericin) hybrid colloid has been prepared using sericin as reducing agent and dispersing agent. Cotton fabrics was oxidized selectively with sodium periodate (NaIO₄) to generate oxidized cotton fabrics, and which has then been finished using Ag NPS-sericin hybrid colloid prepared to obtain multi-functional cotton textiles. The finished cotton fabric not only possessed excellent antibacterial activity, but also it was modified functionally by sericin protein, which endowed antibacterial cotton fabrics relatively smooth surface and good wear ability. Fourier transform infrared spectrogram confirmed that sericin protein was grafted onto cellulose fibers. Ag NPs were characterized by UV-Vis spectroscopy, transmission electron microscope (TEM) and X-ray powder diffraction (XRD). The results of SEM, X-ray photoelectron spectroscopy (XPS) and EDS confirmed that silver nanoparticles and sericin been loaded successfully on the surface of cotton fabrics. The antibacterial experiments showed bacterial reduction rates of S.aureus and E.coli were able to reach above 99 %. After washing 20 times, it showed still good antibacterial activity at over 95 % against S.aureus and E.coli.     

Effect of various shapes of zinc oxide nanoparticles on cotton fabric for UV-blocking and anti-bacterial properties

Various shapes of ZnO — multi-petals, rod and spherical — were prepared and then applied on cotton fabric for UV-blocking and anti-bacterial properties. The ZnO particles were investigated by XRD and SEM. The as-prepared suspension was applied onto cotton fabrics via the pad-dry-cure process at 150 °C. The characteristics of the fabric coating were investigated by SEM, XRD and Atomic Absorption Spectroscopy (AAS). The UV-blocking effectiveness was measured with a UV-Vis spectrophotometer whilst the antibacterial activity was determined using the AATCC 147 method. The results of XRD and SEM on the ZnO powders show that we can produce various shapes of ZnO. The investigation by SEM and AAS clearly revealed that ZnO was effectively deposited on the cotton surface and that the adhesion was retained after washing ten cycles. The sphericals-shaped ZnO and multi-petals shaped ZnO coated fabrics show excellent UV-blocking properties. All treated samples showed good antibacterial activity against Staphylococcus Aureus. The shape of ZnO shows no considerable effect on antibacterial properties.     

Preparation and antibacterial property of the mulberry based textiles

The mulberry based textile products were prepared by means of degumming, dyeing, spinning and weaving using mulberry bark as raw materials. The structure of the mulberry based textiles was characterized by scanning electron microscope (SEM). The antibacterial property of the mulberry fibers was evaluated by means of antibacterial testing, and the antibacterial composition in the mulberry based textiles was investigated by FTIR and ¹³C-NMR. The results show that the mulberry based fibers, dyed fibers, yarns and fabrics with high quality can be prepared successfully by the above processes. The mulberry based textiles have excellent antibacterial property. The inhibitory rate of raw mulberry bark on Escherichia coli and Staphylococcus aureus is (67.2±3.1)% and (53.8±4.6)% respectively, and the inhibitory rate of mulberry fiber on Escherichia coli and Staphylococcus aureus is both above 80%. The inhibitory rate of the mulberry/cotton blended yarn on Escherichia coli and Staphylococcus aureus ranges from (51.7±5.1)% to (72.4±4.1)%, which has similar inhibitory rate with the mulberry/cotton blended fabric. The results of Fourier Transform-Infrared (FTIR) and ¹³C-nuclear magnetic resonance (¹³C-NMR) show that the typical functional group (hydroxyl, carbonyl, double bond and epoxy bond) exist in the composition of the mulberry fiber, which indicates that the flavones and phenolic compounds including in the mulberry fiber.     

Synthesis and Characterization of Aqueous Chitosan-polyurethanes Dispersion for Textile Applications with Multipurpose Performance Profile

As the use of high performance textiles has grown, the need for chemical finishes to provide the fabric properties required in the special applications has grown accordingly. In this project, a series of water dispersible polyurethanes dispersion (CS-PUs) with multipurpose performance profile was developed using isophorone diisocyanate (IPDI), polyethylene glycol (PEG), 2,2-dimethylol propionic acid (DMPA) and chitosan (CS) for textile applications. In two step synthesis process, NCO functional PU prepolymers prepared by reacting IPDI, PEG, and DMPA were extended with varying molar quantities of chitosan followed by structural characterization through FTIR. The prepared CS-PU dispersions were applied onto the dyed and printed poly-cotton blend fabrics. The performance behavior of the treated fabric in terms of crease recovery, tear strength, tensile strength, and antibacterial properties was evaluated by applying standard test methods. These investigations show that the CS-PU dispersions can be applied as antibacterial textile finishes with significant improvement in the physical and mechanical properties of poly-cotton fabrics.