Effect of Wheat Starch Structure on Swelling Power

Starches were isolated from the endosperm of 12 wheat samples with a wide swelling power range in the wholemeal. Starch amylose content (24.8–34.2%) correlated negatively with the swelling power of isolated starch (18.3–26.9), but starch lipid content showed no such correlation. Higher proportions of long chains (DP ≥ 35) in amylopectins contributed to increased starch swelling. Native starch gelatinization temperatures and enthalpy measured by differential scanning calorimetry correlated positively with swelling power, which also correlated significantly with the regelatinization enthalpy of retrograded starches stored at 5°C for two and four weeks.     

Physicochemical and digestibility properties of double-modified banana ( Musa paradisiaca L.) starches

Banana starch was chemically modified using single (esterification or cross-linking) and dual modification (esterification-cross-linking and cross-linking-esterification), with the objective to increase the slowly digestible starch (SDS) and resistant starch (RS) concentrations. Physicochemical properties and in vitro digestibility were analyzed. The degree of substitution of the esterified samples ranged from 0.006 to 0.020. The X-ray diffraction pattern of the modified samples did not show change; however, an increase in crystallinity level was determined (from 23.79 to 32.76%). The ungelatinized samples had low rapidly digestible starch (RDS) (4.23-9.19%), whereas the modified starches showed an increase in SDS (from 10.79 to 16.79%) and had high RS content (74.07-85.07%). In the cooked samples, the esterified starch increased the SDS content (21.32%), followed by cross-linked starch (15.13%). Dual modified starch (cross-linked-esterified) had the lowest SDS content, but the highest RS amount. The esterified and cross-linked-esterified samples had higher peak viscosity than cross-linked and esterified-cross-linked. This characteristic is due to the fact that in dual modification, the groups introduced in the first modification are replaced by the functional group of the second modification. Temperature and enthalpy of gelatinization decreased in modified starches (from 75.37 to 74.02 °C and from 10.42 to 8.68 J/g, respectively), compared with their unmodified starch (76.15 °C and 11.05 J/g). Cross-linked-esterified starch showed the lowest enthalpy of gelatinization (8.68 J/g). Retrogradation temperature decreased in modified starches compared with unmodified (59.04-57.47 °C), but no significant differences were found among the modified samples.     

Comparison of Physicochemical Properties and Structures of Sugary‐2 Cornstarch with Normal and Waxy Cultivars

Starches from normal, waxy, and sugary‐2 (su2) corn kernels were isolated, and their structures and properties determined. The total lipid contents of normal, waxy, and su2 corn starches were 0.84, 0.00, and 1.61%, respectively. Scanning electron micrographs showed that normal and waxy corn starch granules were spherical or angular in shape with smooth surfaces. The su2 starch granules consisted of lobes that resembled starch mutants deficient in soluble starch synthases. Normal and waxy corn starches displayed A‐type X‐ray patterns. The su2 starch showed a weak A‐type pattern. The chain‐length distributions of normal, waxy, and su2 debranched amylopectins showed the first peak chain length at DP (degree of polymerization) 13, 14, and 13, respectively; second peak chain length at DP 45, 49, and 49, respectively; and highest detectable DP of 80, 72, and 76, respectively. The su2 amylopectin showed a higher percentage of chains with DP 6–12 (22.2%) than normal (15.0%) and waxy (14.6%) amylopectins. The absolute amylose content of normal, waxy, and su2 starches was 18.8, 0.0, and 27.3%, respectively. Gel‐permeation profiles of su2 corn starch displayed a considerable amount of intermediate components. The su2 corn starch displayed lower gelatinization temperature, enthalpy change, and viscosity; a significantly higher enthalpy change for melting of amylose‐lipid complex; and lower melting temperature and enthalpy change for retrograded starch than did normal and waxy corn starches. The initial rate of hydrolysis (3 hr) of the corn starches followed the order su2 > waxy > normal corn. Waxy and su2 starches were hydrolyzed to the same extent, which was higher than normal starch after a 72‐hr hydrolysis period.     

Influence of amylopectin structure and amylose content on the gelling properties of five cultivars of cassava starches

Five cassava genotypes were investigated to identify the fine amylopectin structures and granule chemical compositions, which differentiated the starches into high (T(o) = 63.7 degrees C on average) and low (57.3 degrees C on average) gelatinization temperatures. The amylose contents (15.9-22.4%) and granular dimensions (12.9-17.2 microm) significantly differed among the starches. Diverse amylopectin structural elements resulted in significant swelling power, viscoelastic properties, and gel firmness. Debranched starches revealed a trimodal amylopectin distribution of three fractions: FIII (DP 12), FII (DP 24.31), and FI (DP 63) and FIII (DP 12), FII (DP 24.69), and FI (DP 67) for the low and high gelatinization starch groups, respectively. The higher proportion of FI long chain entanglement with amylose chain lengths to form longer helical structures was confirmed in the high gelatinization starch group, which developed "true" gels with better shear resistance, frequency independence, and higher gel firmness. Significant amounts of resistant starch fractions revealed the potential for application of these genotype starches in diverse foods.     

Composition,Molecular Structure,Properties, and In Vitro Digestibility of Starches from Newly Released Canadian Pulse Cultivars

Pulse starches were isolated from different cultivars of pea, lentil, and chickpea grown in Canada under identical environmental conditions. The in vitro digestibility and physicochemical properties were investigated and the correlations between the physicochemical properties and starch digestibility were determined. Pulse starch granules were irregularly shaped, ranging from oval to round. The amylose content was 34.9–39.0%. The amount of short A chains (DP 6‐12) of chickpea starch was much higher than the other pulse starches, but the proportions of B1 and B2 chains (DP 13‐24 and DP 25‐36, respectively) were lower. The X‐ray pattern of all starches was of the C type. The relative crystallinity of lentil (26.2–28.3%) was higher than that of pea (24.4–25.5%) and chickpea starches (23.0–24.8%). The swelling factor (SF) in the temperature range 60–90°C followed the order of lentil ≈ chickpea > pea. The extent of amylose leaching (AML) at 60°C followed the order of pea ≈ chickpea > lentil. However, in the temperature range 70–90°C, AML followed the order of lentil > pea > chickpea. The gelatinization temperatures followed the order of lentil > pea > chickpea. The peak viscosity, setback, and final viscosity of pea starch were lower than those of the other starches. Lentil starch exhibited lower rapidly digestible starch (RDS) content, hydrolysis rate, and expected glycemic index (eGI). The resistant starch (RS) content of both lentil cultivars was nearly similar. However, pea and chickpea cultivars exhibited wide variations in their RS content. Digestibility of the pulse starches were significantly correlated (P < 0.05) with swelling factor (60°C), amylose leaching (60°C), gelatinization temperature, gelatinization enthalpy, relative crystallinity, and chain length distribution of amylopectin (A, B1, and B2 chains).     

Structure and functional properties of sorghum starches differing in amylose content

Starches were isolated from grains of waxy, heterowaxy, and normal sorghum. To study the relationship between starch structure and functionality and guide applications of these starches, amylose content, amylopectin chain-length distributions, gelatinization and retrogradation, pasting properties, dynamic rheological properties, and in vitro enzyme digestion of raw starches were analyzed. Heterowaxy sorghum starch had intermediate amylose content, pasting properties, and dynamic rheological properties. Stress relaxation was a useful indicator of cooked starch cohesiveness. Cooked heterowaxy sorghum starch (10% solids) had a viscoelastic-solid type of character, whereas cooked waxy sorghum starch behaved like a viscoelastic liquid. Amylopectin of normal sorghum starch had a slightly higher proportion of chains with degree of polymerization (DP) of 6-15 (45.5%) compared with amylopectin of heterowaxy starch (44.1%), which had a gelatinization peak temperature 2 degrees C higher than normal sorghum starch. Heterowaxy sorghum starch contained significantly lower rapidly digestible starch (RDS) and higher resistant starch (RS) than waxy sorghum starch.     

Effects of Environmental Temperature on Structure and Gelatinization Properties of Wheat Starch

The effects of environmental temperature on gelatinization properties and amylopectin structures of wheat endosperm starch were examined by isolating starches from four wheat cultivars matured in growth chambers at daytime temperatures of 15, 20, 25, or 30°C. Kernel weight and starch content per kernel were reduced by high maturation temperature. Amylose content showed no significant change at high maturation temperature in some cultivars; in other cultivars, there was a slight increase. Principal component analysis of data on relative peak areas of debranched amylopectin showed that amylopectin from wheat grown at a lower temperature had a greater proportion of shorter chains. Amylopectin branch chains were classified into three groups based on the correlation coefficients between the data of branch chain length distribution and principal component scores, degree of polymerization (DP) of 6–12, DP 13–34, and DP ≥ 35. The gelatinization temperature of starches increased markedly at a higher maturation temperature, with increases exceeding 10°C at high maturation temperatures. Gelatinization properties correlated significantly with amylopectin chain length distribution.     

Effects of β-amylolysis on the resistant starch formation of debranched corn starches

Retrograded amylose is resistant to digestion by amylolytic enzymes, which is known as resistant starch type III (RS3). In this study we investigated the effect of β-amylase hydrolysis on the formation and physicochemical properties of RS3 from debranched corn starches. Three types of corn starch (Hylon VII, Hylon V, and common corn) were first gelatinized and then hydrolyzed using β-amylase to varying degrees. The resultant hydrolyzed starch was debranched with isoamylase and then exposed to temperature cycling to promote RS formation. A broad endotherm from approximately 45 to 120 °C and a small endotherm above 150 °C were noted for all retrograded starches. All three corn starches had increased RS contents after moderate β-amylolysis, with Hylon V having the highest RS content at 70.7% after 4 h of β-amylolysis. The results suggest that RS3 formation is affected by the starch composition as well as the starch structure and can be increased by moderate β-amylolysis.     

Structural characterization of Peruvian carrot (Arracacia xanthorrhiza) starch and the effect of annealing on its semicrystalline structure

Structural characteristics of native and annealed Peruvian carrot (Arracacia xanthorrhiza) starches were determined and compared to those of cassava and potato starches. Peruvian carrot starch presented round and irregular shaped granules, low amylose content and B-type X-ray pattern. Amylopectin of this starch contained a large proportion of long (DP > 37) and short (DP 6-12) branched chains. These last ones may contribute to its low gelatinization temperature. After annealing, the gelatinization temperatures of all starches increased, but the ΔH and the crystallinity increased only in Peruvian carrot and potato starches. The annealing process promoted a higher exposure of Peruvian carrot amylose molecules, which were more quickly attacked by enzymes, whereas amylopectin molecules became more resistant to hydrolysis. Peruvian carrot starch had structural characteristics that differed from those of cassava and potato starches. Annealing affected the semicrystalline structure of this starch, enhancing its crystallinity, mainly due to a better interaction between amylopectin chains.     

Production of Boiling‐Stable Granular Resistant Starch by Partial Acid Hydrolysis and Hydrothermal Treatments of High‐Amylose Maize Starch

The purpose of the present work was to examine whether partial acid hydrolysis (PAH) of a high‐amylose maize starch (ae‐VII) would enhance the effects of hydrothermal treatments to produce granular resistant starch (RS) that is stable to further heat treatment at atmospheric pressure. PAH ae‐VII starches were prepared by heating 35% (w/v) suspensions with 1% (w/w) HCl at 25°C for 6, 30, and 78 hr. Native and PAH starches were then treated by annealing (ANN) or heat‐moisture treatment (HMT). ANN was done at 70% moisture at 50, 60, or 70°C for 24 hr, and HMT was done at 30% moisture at 100, 120, or 140°C for 80 min. RS that survives boiling during analysis was determined by a modification of the AOAC method for determining total dietary fiber. RS was also determined by the Englyst method. Little change in the gelatinization enthalpy was found for ae‐VII starch after PAH, ANN, or HMT as individual treatments. After PAH, either ANN or HMT led to decreased gelatinization enthalpy. HMT and ANN alone increased boiling‐stable RS but decreased total RS. After PAH of ae‐VII, either ANN or HMT tended to increase the yield of boiling‐stable granular RS, with the greatest yield (≤63.2%) observed for HMT.     

Thermal Properties of Corn Starch Extraction Intermediates by Differential Scanning Calorimetry

Thermal properties of corn starch extraction intermediates from four types of corn were studied using differential scanning calorimetry. Starch at four different stages of extraction, including a standard single-kernel starch isolation procedure and three starch extraction intermediates, was isolated from mature corn kernels of B73 and Oh43 inbreds and the mutants of waxy (wx) and amylose extender (ae) in an Oh43 background. Differences in thermal properties and moisture and protein contents of starch from the extraction stages were statistically analyzed. Most thermal properties (gelatinization and retrogradation onset temperatures, gelatinization and retrogradation ranges, gelatinization and retrogradation peak temperatures, gelatinization and retrogradation enthalpies, peak height index, and percentage of retrogradation) of starches extracted at stage 3 intermediate (a procedure that did not include a final washing step) were similar to those of starch extracted by the standard single-kernel isolation procedure. Values for gelatinization peak temperature, gelatinization enthalpy, and peak height index were different between the standard and the stage 3 intermediate. The values obtained from starches extracted at stage 3, however, were consistent and predictable, suggesting that this extraction intermediate might be used in screening programs in which many starch samples are evaluated. By using the stage 3 extraction, samples could be evaluated in three rather than four days and the procedure saved ≈0.5 hr of labor time. The other two starch extraction intermediates, which excluded filtering and washing or filtering, washing, and steeping, produced starch with thermal properties generally significantly different from starch extracted by the standard single-kernel isolation procedure.     

Physical properties of octenyl succinic anhydride modified rice,wheat, and potato starches

The physical properties of octenyl succinic anhydride (OSA) starches prepared from rice, wheat, and potato starches were studied. Rice and wheat OSA starches had significantly higher peak viscosity (PV), hot paste viscosity (HPV), and cool paste viscosity (CPV), but potato OSA starch had only significantly higher CPV, relative to the native starch. The gel hardness was higher with lower degree of substitution (DS) but lower with higher DS OSA compared to native starch. The swelling volumes (SV) of rice and wheat OSA starches were significantly higher compared to native starch, but the SV of potato OSA starch was slightly lower at high DS. The gelatinization temperature (GT) of rice OSA starches was sharply lower at low DS; for wheat OSA starch it was slightly lower even at high DS, but potato OSA starches had higher GT than the native starch. The enthalpy of all the OSA starches decreased gradually with increased DS. This study showed that the magnitude of changes in physical properties of OSA-modified starches depends not only on their DS but also on the botanical origin of the native starches.     

Model approach to starch functionality in bread making

We used modified wheat starches in gluten-starch flour models to study the role of starch in bread making. Incorporation of hydroxypropylated starch in the recipe reduced loaf volume and initial crumb firmness and increased crumb gas cell size. Firming rate and firmness after storage increased for loaves containing the least hydroxypropylated starch. Inclusion of cross-linked starch had little effect on loaf volume or crumb structure but increased crumb firmness. The firming rate was mostly similar to that of control samples. Presumably, the moment and extent of starch gelatinization and the concomitant water migration influence the structure formation during baking. Initial bread firmness seems determined by the rigidity of the gelatinized granules and leached amylose. Amylopectin retrogradation and strengthening of a long-range network by intensifying the inter- and intramolecular starch-starch and possibly also starch-gluten interactions (presumably because of water incorporation in retrograded amylopectin crystallites) play an important role in firming.     

Structural properties of hydrolyzed high-amylose rice starch by α-amylase from Bacillus licheniformis

High-amylose cereal starch has a great benefit on human health through its resistant starch (RS) content. Enzyme hydrolysis of native starch is very helpful in understanding the structure of starch granules and utilizing them. In this paper, native starch granules were isolated from a transgenic rice line (TRS) enriched with amylose and RS and hydrolyzed by α-amylase. Structural properties of hydrolyzed TRS starches were studied by X-ray powder diffraction, Fourier transform infrared, and differential scanning calorimetry. The A-type polymorph of TRS C-type starch was hydrolyzed faster than the B-type polymorph, but the crystallinity did not significantly change during enzyme hydrolysis. The degree of order in the external region of starch granule increased with increasing enzyme hydrolysis time. The amylose content decreased at first and then went back up during enzyme hydrolysis. The hydrolyzed starches exhibited increased onset and peak gelatinization temperatures and decreased gelatinization enthalpy on hydrolysis. These results suggested that the B-type polymorph and high amylose that formed the double helices and amylose-lipid complex increased the resistance to BAA hydrolysis. Furthermore, the spectrum results of RS from TRS native starch digested by pancreatic α-amylase and amyloglucosidase also supported the above conclusion.     

Comparison of the gelatinization behavior of organic and conventional spelt starches assessed by thermal and rheological analyses

The objective of this study was to compare gelatinization properties and molecular composition of starches extracted from locally grown organic and conventional spelt using thermal, rheological, and SEC analyses, along with Concanavalin A method. Organic and conventional spelt was planted in six replicated plots, and the extracted starch was analyzed for their gelatinization properties. DSC showed that the gelatinization temperature ranged from 56.7 to 68.8 °C with an average peak of 62.4 °C, with no evidence for statistical difference in gelatinization properties between treatments. Rheological behavior variation among samples was more pronounced than that between the two growing conditions. The amylose content ranged from 23.0% to 29.8%. There was no significant difference in the molecular weight of amylose and amylopectin irrespective of the plot locations, although a significant difference was found between the amylopectin molecular weight of organic and conventional spelt starches when analyzed collectively. The organic spelt starch studied may substitute the conventional starch when gelatinization behavior is considered.     

Cross‐Linked Resistant Starch: Preparation and Properties

Resistant starches (RS) were prepared by phosphorylation of wheat, waxy wheat, corn, waxy corn, high‐amylose corn, oat, rice, tapioca, mung bean, banana, and potato starches in aqueous slurry (≈33% starch solids, w/w) with 1–19% (starch basis) of a 99:1 (w/w) mixture of sodium trimetaphosphate (STMP) and sodium tripolyphosphate (STPP) at pH 10.5–12.3 and 25–70°C for 0.5–24 hr with sodium sulfate or sodium chloride at 0–20% (starch basis). The RS₄ products contain ≤100% dietary fiber when assayed with the total dietary fiber method of the Association of Official Analytical Chemists (AOAC). In vitro digestion of four RS₄ wheat starches showed they contained 13–22% slowly digestible starch (SDS) and 36–66% RS. However after gelatinization, RS levels fell by 7–25% of ungelatinized levels, while SDS levels remained nearly the same. The cross‐linked RS₄ starches were distinguished from native starches by elevated phosphorus levels, low swelling powers (≈3g/g) at 95°C, insolubilities (<1%) in 1M potassium hydroxide or 95% dimethyl sulfoxide, and increased temperatures and decreased enthalpies of gelatinization measured by differential scanning calorimetry.     

Structural stability and prebiotic properties of resistant starch type 3 increase bile acid turnover and lower secondary bile acid formation

Microbial metabolism is essential in maintaining a healthy mucosa in the large bowel, preferentially through butyrate specific mechanisms. This system depends on starch supply. Two structurally different resistant starches type 3 (RS3) have been investigated with respect to their resistance to digestion, fermentability, and their effects on the composition and turnover of bile acids in rats. RSA (a mixture of retrograded maltodextrins and branched high molecular weight polymers), which is more resistant than RSB (a retrograded potato starch), increased the rate of fermentation accompanied by a decrease of pH in cecum, colon, and feces. Because they were bound to RS3, less bile acids were reabsorbed, resulting in a higher turnover through the large bowel. Because of the rise of volume, the bile acid level was unchanged and the formation of secondary bile acids was partly suppressed. The results proved a strong relation between RS3, short chain fatty acid production, and microflora. However, butyrate specific benefits are only achieved by an intake of RS3 that result in good fermentation properties, which depend on the kind of the resistant starch structures.     

Comparative study of the retrogradation of intermediate water content waxy maize, wheat, and potato starches

The retrogradation of extruded starches from three different botanical sources was studied in concentrated conditions (34 +/- 1% water) at 25 degrees C using differential scanning calorimetry (DSC) and isothermal calorimetry, Fourier transform infrared spectroscopy (FTIR), and wide-angle X-ray scattering. Potato starch showed the highest rate of retrogradation (approximately 0.17 h(-1)) followed by waxy maize (approximately 0.12 h(-1)), while the retrogradation of wheat starch was the slowest (approximately 0.05 h(-1)). In addition to the kinetics, the extent of molecular order in the retrograded samples was studied in detail in terms of "short-range" (helical) and "long-range" (crystalline) distance scales. The amylopectin crystallinity indices were essentially the same (approximately 47-51% amylopectin basis) for the three starches. However, significant differences were found in the enthalpy of melting measured by DSC after "full" retrogradation (potato, 11.6 +/- 0.7; waxy maize, 9.0 +/- 0.5; and wheat, 6.1 +/- 0.3 J/g of amylopectin). The degree of short-range molecular order in the retrograded state determined by FTIR was waxy maize > potato > wheat. The effect of amylopectin average chain length and the polymorphism of the crystalline phase were taken into account to explain the differences in the retrogradation enthalpies.     

Gelatinization,Pasting, and Gelling Properties of Sweetpotato and Wheat Starch Blends

Sweetpotato starch is high yielding but has very limited uses. It is possible to expand its application by blending it with other starches to obtain novel properties. In this study, functional properties of the blends of native sweetpotato starch with native, acid‐thinned, and hydroxypropylated wheat starch were studied at different ratios (75:25, 50:50, 25:75). The swelling factor, extent of amylose leaching, pasting, and gel textural properties of the blends were nonadditive of their individual components, and could be mathematically modeled by quadratic equations in relation to the ratios. Two peaks during pasting were observed for some starch mixtures studied by Rapid ViscoAnalyser (RVA). The gelatinization and retrogradation enthalpies (ΔH) of the blends were additive of their individual components and could be modeled by linear equations. All starch mixtures exhibited two peaks during differential scanning calorimetry (DSC) scan for gelatinization, but a single peak for retrograded starches. This study may provide basis for formulation of mixtures using starch from diverse sources to develop more natural starch systems with a range of physicochemical properties.     

Morphological Changes of Granules of Different Starches by Surface Gelatinization with Calcium Chloride

Native starch granules of 11 selected cultivars (potato, waxy potato, sweet potato, normal maize, high‐amylose maize, waxy maize, wheat, normal barley, high‐amylose barley, waxy barley, and rice) were treated with a calcium chloride solution (4M) for surface gelatinization. The surface‐gelatinized starch granules were investigated using light microscopy and scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). In general, those starches with larger granule sizes required longer treatment time to complete the gelatinization. The salt solution treatment of starch was monitored by light microscopy and stopped when the outer layer of the granule was gelatinized. The surface gelatinized starch granules were studied using scanning electron microscopy. On the basis of the gelatinization pattern from calcium chloride treatments, the starches could be divided into three groups: 1) starches with evenly gelatinized granule surface, such as normal potato, waxy potato, sweet potato, maize, and high‐amylose maize; 2) starches with salt gelatinization concentrated on specific sites of the granule (i.e., equatorial groove), such as wheat, barley, and high‐amylose barley; and 3) starches that, after surface gelatinization, can no longer be separated to individual granules for SEM studies, such as waxy barley, waxy maize, and normal rice. The morphology of the surface gelatinized starch resembled that of enzyme‐hydrolyzed starch granules.