Milling of Regular and Waxy Starch Hull-less Barleys for the Production of Bran and Flour

Five registered cultivars of hull-less barley (HB) with regular or waxy starch were milled in a Quadrumat Jr. mill to obtain whole grain flour; pearled in a Satake mill (cultivar Condor only), and the pearled fractions examined by microscopy to determine true HB bran. The samples were milled after tempering and drying in a Buhler mill to obtain bran and flour yields. Flour color and composition of HB were unaltered on milling in the Quadrumat Jr. mill. Microscopic evidence showed that a 70% pearl yield was devoid of the grain's outer coverings, including the aleurone and subaleurone layers. Therefore, the balance of 30% constitutes true bran in HB. Dry milling (as-is grain moisture) of regular starch HB in the Buhler mill gave 59% total flour and 41% bran (bran + shorts) yields, the comparative values for the waxy starch HB were 42 and 58%. On tempering HB from 9 to 16% grain moisture, the total flour yield decreased in both types of HB but to a lesser extent in the waxy starch HB due to decreases in reduction flour. On drying HB to 5 or 7% moisture, total flour yields increased due to contamination with bran and shorts. The milling study led to the conclusion that HB, at best, be dry-milled and a bran finisher be used to obtain commercial flour extraction rates. Lower total flour yields in the waxy starch HB than in the regular starch HB milled at the same grain moisture levels seemed due to higher β-glucan rather than grain hardness. Waxy starch HB flour had higher mixograph water absorption and water-holding capacity than regular starch HB or soft white wheat flour milled under identical conditions. Roller-milled HB products offer the best potential for entry into the food market.     

Distribution of β‐Glucan in the Grain of Hull‐less Barley

Nine hull‐less barley (HB) containing waxy (0–7% amylose), normal (≈25% amylose), or high amylose (≈42% amylose) starch with normal or fractured granule make‐up and 4–9% (1→3)(1→4)‐β‐d ‐glucans (β‐glucan) were pearled to remove 70% of the original grain weight in 10% intervals. The pearled fractions were analyzed for β‐glucan distribution within HB grain. Protein content of the pearled fractions indicated that the three outermost fractions contained pericarp and testa, aleurone, and subaleurone tissues, respectively. For all HB, β‐glucan and acid‐extract viscosity were very low in the outermost 20% of the kernel. For low β‐glucan HB, β‐glucan content was the greatest in the subaleurone region and declined slightly toward inner layers. For high β‐glucan HB, however, more than 80% of grain β‐glucan was distributed more evenly throughout the endosperm. Acid extract viscosity was significantly (P < 0.01) correlated with total (r = 0.75) and soluble (r = 0.87) β‐glucan content throughout the kernel of all HB. Growing conditions, location and year, had significant effects on the concentration of protein, starch and β‐glucan. However, protein, starch, and β‐glucan distribution patterns were not affected by growing conditions. The difference in β‐glucan distribution between low and high β‐glucan HB may explain the difference in milling performance of HB with low or high β‐glucan.     

Differences in Carbohydrate Composition and Digestion In Vitro of Selected Barley Cultivars as Influenced by Pearling and Cooking

Among common cereals, barley is a low glycemic index food. In an attempt to better understand this character, the nutritional properties of glycemic carbohydrates and dietary fiber concentrations of nine cultivars were evaluated. The cultivars were selected based on botanical variations and commercial value to investigate the impact of pearling and cooking on nutritional properties. Each cultivar was pearled into four fractions ranging from hull removal only to hull, bran, germ, and crease removal. The study showed that botanical class and degree of pearling significantly affect the carbohydrate composition and digestion indices of barley. Waxy starch cultivars had less total starch and more rapidly digestible starch (RDS), rapidly available glucose (RAG), and β‐glucan than the other nonwaxy cultivars. Regardless of the barley type, the less pearled kernels had significantly lower total starch and higher total low molecular weight sugars, insoluble, and total fiber. However, β‐glucan content was fairly comparable in the whole grain and pearled fractions. Cooking had a significant effect on nutritional properties of Celebrity and AC Klinck cultivars. The only consistent significant difference between raw and cooked barley was resistant starch (RS), which increased after cooking regardless of cultivar or fraction. The study showed that barley cultivar and carbohydrate composition significantly affected starch digestion with some cultivar fractions holding a promise for the development of low glycemic index foods.     

Enzyme-Assisted Wet Separation of Starch from Other Seed Components of Hull-less Barley

A multiple enzyme cocktail containing cellulase, endo-(1→3), (1→4)-β-d -glucanase and xylanase was used in wet separation of starch, protein, β-glucan, bran, and tailings from four hull-less barleys (HB): SB94794 (0% amylose), CDC Candle (5% amylose), CDC Dawn (24% amylose), and SB550831 (40% amylose). Compared to a conventional procedure, the enzyme-assisted wet extraction reduced slurry viscosity by 50–99%, the amount of water and ethanol used in screening and β-glucan precipitation by 30–60%, and screening time by 20–80%. The enzyme-assisted extraction reduced starch contents and yields of tailings and bran fractions, resulting in a 10% increase in average starch extraction efficiency. However, β-glucan yield was reduced in the enzyme-assisted extraction, particularly in high-viscosity HB. The physicochemical properties of isolated starches were not affected by the enzyme-assisted extraction.     

Pearling of hull-less barley: product composition and gel color of pearled barley flours as affected by the degree of pearling

Barley grains from two hull-less varieties, Phoenix and Candle, were pearled to various degrees (10-80%). The composition (starch, protein, beta-glucan, lipid, and ash) of pearled grain (PG) and pearling flour (PF) was determined. Effect of pearling on Hunter L, a, and b color parameters of uncooked and cooked (gel) barley flour (milled from PG) was investigated over a 3 day storage at 4 degrees C.     

Starch and By‐Products from a Laboratory‐Scale Barley Starch Isolation Procedure

Starch was isolated from three different barleys with normal, highamylose, or high‐amylopectin (waxy) starch. The laboratory‐scale starch isolation procedure included crushing of grains, steeping, wet milling, and sequential filtration and washing with water and alkali, respectively. Yield and content of starch, protein, and dietary fiber, including β‐glucan, were analyzed in isolated starch and in the by‐products obtained. Starch yield was 25–34%, and this fraction contained 96% starch, 0.2–0.3% protein, and 0.1% ash. Most of the remaining starch was found in the coarse material removed by filtration after wet milling, especially for the high‐amylose barley, and in the starch tailings. Microscopy studies showed that isolated starch contained mostly A‐granules and the starch tailings contained mostly B‐granules. Protein concentration was highest in the alkali‐soluble fraction (54%), whereas dietary fiber concentration was highest in the material removed by filtration after alkali treatment for the normal and waxy barleys (55%). The β‐glucan content was especially high for the waxy barley in this fraction (26%). The study thus showed that it was possible to enrich chemical constituents in the by‐products but that there were large differences between barleys. This result indicates a need for modifications in the isolation procedures for different barleys to obtain high yields of starch and different by‐products. Valuable by‐products enriched in β‐glucan or protein, for example, may render starch production more profitable.     

Grain characteristics, chemical composition, and functional properties of rye (Secale cereale L.) as influenced by genotype and harvest year

Grain characteristic, chemical composition, and functional properties of rye were measured in 19 different cultivars grown in one location in up to 3 years. The cultivars included 8 adapted hybrids, 7 adapted population cultivars, and 4 nonadapted population cultivars. The results showed a significant influence of both harvest year and genotype on grain characteristics, chemical composition, and functional properties of the grain. Multivariate data analysis confirmed that the variations in the data were explained by yearly and genotype differences. Calculations of variance components showed that the variations in plant height, harvest yield, and protein content were mainly due to genotype differences and to a lesser extent to differences among harvest years. The kernel weight, hardness index, and content of dietary fiber components, however, were more strongly influenced by the harvest year than by the genotype. Differences in starch properties measured by falling number (FN), amylograph peak viscosity, and temperature at peak viscosity were more strongly influenced by harvest year. The water absorption was strongly influenced by genotype effects, compared to yearly differences. FN and amylograph peak temperature were positively correlated (r = 0.94). No correlation was found between the water absorption and the relative proportion of water-extractable arabinoxylan (AX) compared to the total AX content. However, the degree of ferulic acid cross-linking showed a negative correlation (r = -0.70) with the water absorption.     

Effect of Heat Treatments on Starch Pasting,Particle Size,and Color of Whole‐Grain Barley

Barley β‐glucan has cholesterol‐lowering properties and can be positively affected by heat treatments. The aim of this study was to examine the effects of heat treatments of whole‐grain barley on starch pasting, particle size, and color. Three heat treatments (micronization, roasting, and conditioning) were performed on three cultivars of barley (CDC Rattan, CDC McGwire, and CDC Fibar). All three heat treatments increased peak, breakdown, setback, and final viscosity of CDC Rattan and CDC Fibar. However, they had little effect on the starch‐pasting profile of CDC McGwire. Roasting and conditioning reduced the mean particle size compared with untreated particles, whereas micronization had minimal effect. Heat treatments reduced L* and increased a* and b* compared with no treatment. Overall, this research shows that heat treatments can change other properties of barley that may affect its function in food applications.     

Barley grain constituents, starch composition, and structure affect starch in vitro enzymatic hydrolysis

The relationship between starch physical properties and enzymatic hydrolysis was determined using ten different hulless barley genotypes with variable carbohydrate composition. The ten barley genotypes included one normal starch (CDC McGwire), three increased amylose starches (SH99250, SH99073, and SB94893), and six waxy starches (CDC Alamo, CDC Fibar, CDC Candle, Waxy Betzes, CDC Rattan, and SB94912). Total starch concentration positively influenced thousand grain weight (TGW) (r(2) = 0.70, p < 0.05). Increase in grain protein concentration was not only related to total starch concentration (r(2) = -0.80, p < 0.01) but also affected enzymatic hydrolysis of pure starch (r(2) = -0.67, p < 0.01). However, an increase in amylopectin unit chain length between DP 12-18 (F-II) was detrimental to starch concentration (r(2) = 0.46, p < 0.01). Amylose concentration influenced granule size distribution with increased amylose genotypes showing highly reduced volume percentage of very small C-granules (<5 μm diameter) and significantly increased (r(2) = 0.83, p < 0.01) medium sized B granules (5-15 μm diameter). Amylose affected smaller (F-I) and larger (F-III) amylopectin chains in opposite ways. Increased amylose concentration positively influenced the F-III (DP 19-36) fraction of longer DP amylopectin chains (DP 19-36) which was associated with resistant starch (RS) in meal and pure starch samples. The rate of starch hydrolysis was high in pure starch samples as compared to meal samples. Enzymatic hydrolysis rate both in meal and pure starch samples followed the order waxy > normal > increased amylose. Rapidly digestible starch (RDS) increased with a decrease in amylose concentration. Atomic force microscopy (AFM) analysis revealed a higher polydispersity index of amylose in CDC McGwire and increased amylose genotypes which could contribute to their reduced enzymatic hydrolysis, compared to waxy starch genotypes. Increased β-glucan and dietary fiber concentration also reduced the enzymatic hydrolysis of meal samples. An average linkage cluster analysis dendrogram revealed that variation in amylose concentration significantly (p < 0.01) influenced resistant starch concentration in meal and pure starch samples. RS is also associated with B-type granules (5-15 μm) and the amylopectin F-III (19-36 DP) fraction. In conclusion, the results suggest that barley genotype SH99250 with less decrease in grain weight in comparison to that of other increased amylose genotypes (SH99073 and SH94893) could be a promising genotype to develop cultivars with increased amylose grain starch without compromising grain weight and yield.     

Air Classification of Barley Flours

Flour samples from seven different barleys, including covered and naked barleys and barleys with normal, waxy, and high‐amylose starches, as well as the high fiber barley Prowashonupana, were impact‐milled and air‐classified in a pilot unit. Six fractions (F1–F5 and C5) with increasing particle size were obtained from each barley. All fractions were analyzed for ash, protein, starch, dietary fiber, and total and unextractable β‐glucan. Ash was enriched in C5; covered barleys (4.3–5.7% of dry matter) had a higher ash content than naked barleys (2.1–3.2%). Starch was enriched in F4 for normal and waxy barleys (72–79%) and in F3 for high‐amylose barleys (72–75%). Protein was enriched in F1 (14–26%) for the different barleys. β‐glucan was enriched in F5 and C5 (7–23%), Prowashonupana had the highest value. The extractability of β‐glucan decreased with increasing particle size, probably because of lower amounts of endogenous β‐glucanase and poorer availability of the substrate in larger particles.     

Physicochemical Properties of Zero Amylose Hull-less Barley Starch

Zero amylose starch isolated from hull-less barley (HB) showed a typical A-type diffraction pattern. The X-ray analysis suggested that granules of zero amylose (SB94794) and 5% amylose (CDC Candle) HB starches had lower crystallinity than did commercial waxy corn starch. Differential scanning calorimetry showed lower transition temperatures and endothermal enthalpies for the HB starches than for the waxy corn starch. The zero amylose HB starch showed a Brabender pasting curve similar to that of waxy corn starch, but with lower pasting and peak temperatures and a higher peak viscosity. Noteworthy characteristics of zero amylose HB starch were its low pasting temperature and high paste clarity and freezethaw stability, which make this starch useful for many food and industrial applications.     

High levels of sugars and fructan in mature seed of sweet wheat lacking GBSSI and SSIIa enzymes

Sweet wheat (SW), which lacks functional granule-bound starch synthase I (GBSSI) and starch synthase IIa (SSIIa), accumulates high levels of free sugars in immature seeds. Here, we examined the effects of the lack of these two enzymes on mature kernel composition. Whole grain flour of SW had higher levels of sugars, particularly maltose, slightly higher ash and protein content, approximately two to three times higher lipid levels, and about twice as much total dietary fiber as parental or wild-type lines. Considerably higher levels of low-molecular-weight soluble dietary fiber (LMW-SDF), largely consisting of fructan, were also detected in SW. Although there were no differences in total amino acid levels, the free amino acid content of SW was approximately 4-fold higher than that of wild type, and the levels of certain free amino acids such as proline were particularly high. Thus, we were able to clearly demonstrate that the lack of GBSSI and SSIIa caused dramatic changes in mature seed composition in SW. These compositional changes suggest that SW flour may provide health benefits when used as a food ingredient.     

In Vitro Bile‐Acid‐Binding of Whole vs. Pearled Wheat Grain

Health benefits of consuming whole grains are reduced risk of heart disease, stroke, and cancer. The U.S. Health and Human Services and USDA dietary guidelines recommend consumption of 6–10 oz of grain products daily and one‐half of that amount should contain whole grains. Whole grains contain vitamins, minerals, fiber, and phytonutrients. Bile‐acid‐binding capacity has been related to cholesterol lowering potential of food fractions. Lowered recirculating bile acids results in utilization of cholesterol to synthesize bile acid and reduced fat absorption. Secondary bile acids have been associated with increased risk of cancer. Bile‐acid‐binding potential has been related to lowering the risk of heart disease and that of cancer. It has been reported that bile‐acid‐binding of wheat bran is not related to its total dietary fiber (TDF) content. Whole (W) grain as well as pearled (P) hard red winter wheat (Hrw), hard white winter wheat (Hww), and durum wheat (DU) cooked grains were evaluated for in vitro, bile‐acid‐binding relative to cholestryramine (a cholesterol lowering bile‐acid‐binding drug). On dry matter basis (db) relative bile‐acid‐binding values were 7.7% WHrw; 7.5% WHww; 6.3% PHww; 6.0% PHrw; 5.5% WDU; and 5.4% PDU. On a TDF basis, binding values were 42–57% of that for cholestyramine for the whole and pearled wheat grains tested. Bile‐acid‐binding values (db) for WHrw and WHww were similar and significantly higher than those of PHww, PHrw, WDU and PDU. Similar bile‐acid‐binding of WHww to that of WHrw suggest that the red color commonly associated with whole grain may not necessarily indicate more healthful potential. Data suggest that cooked WHrw and WHww wheat have significantly higher health‐promoting potential than pearled grains. WDU or PDU wheat health‐promoting potential was similar to that of PHww or PHrw. Consumption of products containing WHrw and WHww are recommended.     

Isolation and Characterization of High‐Purity Starch Isolates from Regular,Waxy, and High‐Amylose Hulless Barley Grains

Recovering starch from barley is problematic typically due to interference from β‐glucan (the soluble fiber component), which becomes highly viscous in aqueous solution. Dry fractionation techniques tend to be inefficient and often result in low yields. Recently, a protocol was developed in our laboratory for recovering β‐glucan from barley in which sieving whole barley flour in a semiaqueous (50% ethanol) medium allowed separation of the starch and fiber fractions without activating the viscosity of the β‐glucan. In this report, we investigate an aqueous method which further purifies the crude starch component recovered from this process. Six hulless barley (HB) cultivars representing two each of waxy, regular, and high‐amylose cultivars were fractionated into primarily starch, fiber, and protein components. Starch isolates primarily had large granules with high purity (>98%) and yield range was 22–39% (flour dry weight basis). More importantly, the β‐glucan extraction efficiency was 77–90%, meaning that it was well separated from the starch component during processing. Physicochemical evaluation of the starch isolates, which were mainly composed of large granules, showed properties that are typical of the barley genotypes.     

Compositional equivalence of barleys differing only in low- and normal-phytate levels

Recent breeding advances have led to the development of several barley lines and cultivars with significant reductions (50% or greater) in phytate levels. Low-phytate (LP) grain is distinguished by containing not only a reduced level of phytate P but also an increased level of inorganic P, resulting in greater bioavailability of P and mineral cations in animal diets. It is important to determine whether other nutritional characteristics are altered by breeding for the low-phytate trait. This study was designed to investigate if breeding for reduced phytate content in barleys had any effect on the contents of other attributes measured by comparing mean and range values of the levels of protein, oil, ash, total carbohydrate, starch, and β-glucan, fatty acid composition, and levels of tocopherols and tocotrienols between five LP and five normal-phytate barleys grown in three Idaho locations. Results show that only the phytate level in the LP group was substantially lower than that of the normal-phytate group and that all other attributes measured or calculated were substantially equivalent between the two groups of barleys. Therefore, the phytate level had little effect on the levels of protein, oil, ash, total carbohydrate, starch, and β-glucan, fatty acid composition, and levels of tocopherols and tocotrienols in barley seeds.     

Phytochemical and dietary fiber components in barley varieties in the HEALTHGRAIN Diversity Screen

Ten different barley varieties grown in one location were studied for their content of tocols, folate, plant sterols, alkylresorcinols, and phenolic acids, as well as dietary fiber components (arabinoxylan and beta-glucan). The samples included hulled and hull-less barley types and types with normal, high-amylose, and waxy starch. The aim was to study the composition of raw materials, and therefore the hulls were not removed from the hulled barleys. A large variation was observed in the contents of all phytochemicals and dietary fibers. Two varieties from the INRA Clermont Ferrand barley program in France (CFL93-149 and CFL98-398) had high content of tocopherols and alkylresorcinols, whereas the variety Dicktoo was highest in dietary fiber content and phenolics. Positive correlations were found between 1000 kernel weight, alkylresorcinols, and tocols, as well as between dietary fiber content and phenolic compounds. The results demonstrate that the levels of phytochemicals in barley can likely be affected by breeding and that the contents of single phytochemicals may easily be adjusted by a right selection of a genotype.     

Genotypic Variation in Nutritional Composition of Buckwheat Groats and Husks

Buckwheat (Fagopyrum esculentum), a highly nutritious pseudocereal rich in bioactive compounds, is principally cultivated in central and eastern European countries. Buckwheat groats and husks of 10 cultivars were subjected to nutritional composition analysis and in vitro starch digestibility determination. Significant genetic variation was detected in buckwheat groats for 1,000‐kernel weight (16.5–39.8 g), protein content (10.2–17.9%), soluble dietary fiber (1.4–3.4%), insoluble dietary fiber (2.3–8.6%), total dietary fiber (3.6–10.6%), free phenolics (4.5–17.1 mg of gallic acid equivalent [GA]/g), and total phenolics content (6.8–20.7 mg of GA/g). The buckwheat husks exhibited large differences between cultivars in protein content (3.0–6.5%), bound phenolics (6.7–26.1 mg of GA/g), and total phenolics content (32.4–58.6 mg of GA/g), which was 1.5–8 times higher than in the groat. Cooked and cooled buckwheat groats exhibited lower starch digestibility and greater resistant starch content than raw buckwheat groats. Buckwheat cultivars with unique nutritional composition, such as Co901 and Ta‐1, were identified for future breeding.     

Impact of Fusarium culmorum on the polysaccharides of wheat flour

To assess the effects of Fusarium infection on the polysaccharides of winter wheat grain (Triticum aestivum L.), grain samples obtained from plants artificially inoculated with Fusarium culmorum were analyzed. Microscopy revealed obvious damage to the starch granules in the seriously infected samples. The Fusarium infection had no analytically detectable influence on the starch and total insoluble dietary fiber content of the wheat grain. There were significantly positive relationships between alpha-amylase activity, cellulase activity, total soluble dietary fiber content, pentosan content, and degree of infection quantified by an enzyme-linked immunosorbant assay, which would indicate the importance of fungal enzymes. A distinct higher Hagberg falling number (FN) was determined in the seriously infected samples, while the viscosity and sucrose content of the flour decreased. However, the addition of a liquid medium contaminated with F. culmorum led to a significant decrease in the FN. Depending on the type of buffer used, the alpha-amylase of F. culmorum demonstrated its maximum activity between pH 5.5 and pH 7.0 at 30-50 degrees C. Remarkably, this fungal alpha-amylase showed a thermostable characteristic and was active over a wide range of temperatures, from 10 to 100 degrees C. This type of thermostability suggests that the alpha-amylase of F. culmorum may damage starch granules throughout the processing of wheat flour, thereby inducing weak dough properties and unsatisfactory bread quality.     

Physicochemical Properties of Oat Varieties and Their Potential for Breadmaking

The breadmaking potential of six oat varieties was compared with and related to their physicochemical properties. The most significant differences in the bread characteristics were found in the crumb structure. The varieties Buggy, Energie, and Zorro resulted in good bread quality with an even gas‐cell distribution characterized by a high number of relatively small pores. In contrast, Typhon, Ivory, and Nord 08/311 each had a large hole in the center of the crumb and accordingly poor quality. Breads differed little in specific volume, bake loss, and density. Rheological analysis revealed positive effects of low batter resistance to deformation on oat bread quality. On the basis of the physicochemical characterization, protein and fat contents were identified as key factors responsible for differences observed in bread quality, provided that starch damage and water‐hydration capacity were low. Additionally, high setback and final viscosity, as determined by Rapid Visco Analyser (RVA) analysis, positively affected oat bread quality. High α‐amylase activity was found to influence negatively the breadmaking performance of oats. Overall, protein, fat, dietary fiber content, starch pasting properties, and α‐amylase activity were responsible for the breadmaking properties of oat varieties.     

水氮耦合对强筋冬小麦子粒蛋白质和淀粉品质的影响

在高肥力条件下,研究水氮耦合对小麦子粒产量、蛋白质含量及组成、蛋白质质量、淀粉含量及组成和淀粉品质的影响。结果表明,无论施氮与否,灌水均显著提高小麦子粒产量,同时显著降低子粒粗蛋白、单体蛋白及湿面筋含量;但不同灌水量间(W1、W2、W3)差异不显著。在低灌水频次(W0、W1)条件下,施氮具有明显的增产效应;而高灌水频次(W2、W3),施氮的增产效应不显著。随着灌水次数增加,谷蛋白总量保持稳定,而谷蛋白组分产生了显著的变化,其中可溶性谷蛋白含量呈上升趋势,不溶性谷蛋白含量和谷蛋白聚合指数呈下降趋势,粉质仪参数(形成时间和稳定时间)也呈下降趋势。小麦子粒蛋白质含量及组分和子粒品质均因施氮(N.168.kg/hm2)而有不同程度的提高,其中非面筋蛋白(清蛋白和球蛋白)的增加幅度高于面筋蛋白(醇溶蛋白和谷蛋白),可溶性谷蛋白增加幅度高于不溶性谷蛋白,即降低了谷蛋白聚合指数。水氮对子粒的淀粉含量及其组成的影响存在明显的交互效应。在不施氮肥条件下,随灌水次数增加,支链淀粉和总淀粉含量呈上升趋势;施氮条件下,各灌水处理(W1、W2、W3)的总淀粉和支链淀粉含量均显著高于不灌水处理(W0),但各灌水处理间差异不显著。随灌水次数增加,直链淀粉含量和直/支比均呈下降趋势,黏度仪指标(峰值黏度、稀值、最终黏度和反弹值)均呈上升趋势。施氮在低灌水频次(W0、W1)条件下促进支链淀粉的合成,同时降低直链淀粉含量和直/支比;高灌水频次(W2、W3)条件下则相反。