Influence of Soft Kernel Texture on the Flour,Water Absorption,Rheology, and Baking Quality of Durum Wheat

Durum wheat (Triticum turgidum subsp. durum ) production worldwide is substantially less than that of common wheat (T. aestivum ). Durum kernels are extremely hard; thus, most durum wheat is milled into semolina, which has limited utilization. Soft kernel durum wheat was created by introgression of the puroindoline genes via homoeologous recombination. The objective of this study was to determine the effects of the puroindoline genes and soft kernel texture on flour, water absorption, rheology, and baking quality of durum wheat. Soft Svevo and Soft Alzada, back‐cross derivatives of the durum varieties Svevo and Alzada, were compared with Svevo, a hard durum wheat, Xerpha, a soft white winter wheat, and Expresso, a hard red spring wheat. Soft Svevo and Soft Alzada exhibited soft kernel texture; low water, sodium carbonate, and sucrose solvent retention capacities (SRCs); and reduced dough water absorptions similar to soft wheat. These results indicate a pronounced effect of the puroindolines. Conversely, SDS flour sedimentation volume and lactic acid SRC of the soft durum samples were more similar to the Svevo hard durum and Expresso samples, indicating much less effect of kernel softness on protein strength measurements. Alveograph results were influenced by the inherent differences in water absorption properties of the different flours and their genetic background (e.g., W and P were markedly reduced in the Soft Svevo samples compared with Svevo, whereas the puroindolines appeared to have little effect on L ). However, Soft Svevo and Soft Alzada differed markedly for W and L . Soft durum samples produced bread loaf volumes between the soft and hard common wheat samples but larger sugar‐snap cookie diameters than all comparison samples. The soft durum varieties exhibited new and unique flour and baking attributes as well as retaining the color and protein characteristics of their durum parents.     

Effect of Puroindolines on the Breadmaking Properties of Wheat Flour

The role of lipid-binding proteins from wheat seed (puroindolines) on the breadmaking properties of wheat flour was investigated by determining the relationship between breadmaking quality and puroindoline content in samples of 32 wheat cultivars. An inverse relationship was mainly explained by the link between hardness and puroindoline contents. This link is in agreement with previous results which have shown a close structural identity between basic friabilins and puroindolines. Next, the effect of puroindolines in breadmaking was investigated by performing reconstitution experiments with two puroindoline-free hard cultivars of opposite quality (Florence Aurore and Ecrin) as indicated in the screened wheat sample. Addition of 0.1% puroindolines to these flours drastically modified both the rheological properties of doughs and the structure of the bread crumb. Puroindolines are essential to the foaming properties of dough liquor, and a close relationship was found between the fine grain crumb provided by reconstituted flours with puroindolines and the fine structure of corresponding dough liquor foams. The effect of puroindolines on bread volume was mainly related to the rheological properties of wheat doughs.     

Effect of Infrared Baking on Wheat Flour Tortilla Characteristics

A new and improved method for baking wheat flour tortillas was evaluated. The method was faster and reduced tortilla dehydration. The aim of the study was to evaluate the efficiency of the infrared baking method on rollability, puffing, layering, color (lightness), and texture (cutting force and tensile strength) characteristics of wheat tortillas formulated and formed by the traditional (hand-rolled) and commercial (hot-press) methods. These tortillas were also compared with traditional tortillas cooked on a hot griddle and commercial tortillas cooked in a three-tier, gas-fired oven. In the infrared radiation (IR) method, tortillas were baked for 17 or 19 sec by IR using black-body radiation at a selected wavelength band and emission temperatures of 549 or 584°C. IR-baked tortillas showed good characteristics of rollability, puffing, layering, color, and texture. The loss of moisture during baking of the tortillas formed by hot-pressing and baked by IR was significantly lower than that of tortillas baked by traditional and commercial methods. X-ray diffraction of tortillas prepared by the traditional process and baked by the IR method showed a pattern similar to that of homemade tortillas baked on a hot griddle. The average energy used by the IR oven was less than that used in the commercial method which, in turn, is more efficient than the traditional hot griddle method.     

Creep‐Recovery of Wheat Flour Doughs and Relationship to Other Physical Dough Tests and Breadmaking Performance

Measurements of creep‐recovery of flour‐water doughs were made using a dynamic mechanical analyzer (DMA) in a compression mode with an applied probe force of 50 mN. A series of wheat flour and blend samples with various breadmaking potentials were tested at a fixed water absorption of 54% and farinograph optimum water absorption, respectively. The flour‐water doughs exhibited a typical creep‐recovery behavior of a noncross‐linked viscoelastic material varying in some parameters with flour properties. The maximum recovery strain of doughs with a fixed water absorption of 54% was highly correlated (r = 0.939) to bread loaf volume. Wheat flours with a large bread volume exhibited greater dough recovery strain. However, there was no correlation (r = 0.122) between maximum creep strain and baking volume. The maximum recovery strain of flour‐water doughs also was correlated to some of the parameters provided by mixograph, farinograph, and TA‐XT2 extension.     

Evaluation of a New Viscometer Performance in Predicting the Technological Quality of Soft Wheat Flour

Gluten aggregation properties were investigated by means of the GlutoPeak device, a viscometer recently proposed as a rapid and sensitive test for measurement of wheat flour technological performance. In this study, 62 soft wheat flour samples of different quality and end use were utilized to evaluate if the GlutoPeak parameters could adequately predict chemical and rheological characteristics of soft wheat flour dough, that is, protein content measured by the Kjeldahl method, dough strength measured by a Chopin alveograph, and dough stability and water absorption measured by a Brabender farinograph. Linear correlation analysis showed that most GlutoPeak curve parameters were strongly correlated with protein content, dough strength, and water absorption. The statistical models, obtained by a stepwise multiple regression method, showed the GlutoPeak device to be a promising tool to characterize wheat flour (R_adj² = 0.84 for protein content, R_adj² = 0.71 for dough strength, and R_adj² = 0.67 for water absorption). The rather high accuracy of the prediction models for the three mentioned parameters confirmed that GlutoPeak parameters are well correlated with other frequently used flour quality parameters and are able to describe flour technological performance.     

Improvement of Sponge Cake Baking Test Procedure for Simple and Reliable Estimation of Soft White Wheat Quality

The sponge cake baking test is accepted and routinely used as a standard quality evaluation tool of soft white wheat for Asian markets, but its lengthy and laborious procedure makes it unsuitable for the routine evaluation of a large number of wheat breeding lines. We simplified the sponge cake baking procedure in the egg‐whipping step and improved its consistency by replacement of the hand mixing of cake batter with mechanical mixing, using a wire whisk or a BeaterBlade paddle. Egg whipping and mechanical batter mixing conditions were optimized by comparing foam density, sponge cake volume, and crumb grain to those obtained by the conventional procedure. Foam density, sponge cake volume, and crumb grain comparable to the conventional 100 g flour procedure were obtained with modifications, including extension of whipping time without heat input using a 5 L KitchenAid mixer, one‐time water addition at 3 min before the completion of egg whipping instead of twice, as in the conventional procedure, and cake batter mixing with a KitchenAid wire whisk or a BeaterBlade paddle. For baking a 50 g flour cake, egg foam of appropriate density was obtained with increased whipping speed and shortened egg‐whipping time (8 min). The modified sponge cake baking procedure yielded egg‐foam density, cake volume, and crumb grain similar to the conventional procedure and effectively differentiated soft wheat flours of different quality. Sponge cake volume of 14 soft white wheat flours ranged from 1,134 to 1,426 mL with the conventional procedure, from 1,113 to 1,333 mL with the modified procedure of batter mixing with a wire whisk, from 1,108 to 1,360 mL with the modified procedure of batter mixing with a BeaterBlade paddle, and from 577 to 719 mL with the modified method of 50 g of flour and batter mixing with a wire whisk. The modified methods with the BeaterBlade paddle and wire whisk exhibited significant correlation in cake volume with a conventional procedure (r = 0.931, P < 0.001 and r = 0.925, P < 0.001, respectively).     

Relationship Between Soft Wheat Flour Physicochemical Composition and Cookie‐Making Performance

Nowadays in Argentina, cookies, crackers, and cakes are made of flour obtained from bread wheat with additives or enzymes that decrease the gluten strength but increase production costs. The present research work aims to study the relationship between flour physicochemical composition (particle size average [PSA], protein, damaged starch [DS], water soluble pentosans [WSP], total pentosans [TP], and gluten), alkaline water retention capacities behavior, solvent retention capacities profile (SRC) and cookie‐making performance in a set of 51 adapted soft wheat lines with diverse origin to identify better flour parameters for predicting cookie quality. Cookie factor (CF) values were 5.06–7.56. High and significant negative correlations between sucrose SRC (–0.68), water SRC (–0.65), carbonate SRC (–0.59), and CF were found, followed by lactic SRC that presented a low negative but significant correlation (r = –0.35). The flour components DS (r = –0.67), WSP (r = –0.49), and TP (r = –0.4) were negatively associated to CF. PSA showed a negative correlation with CF (r = –0.43). Protein and gluten were the flour components that affected cookie hardness, but no significant correlation were found with pentosan or DS content. A prediction equation for CF was developed. Sucrose SRC, PSA, and DS could be used to predict 68% of the variation in cookie diameter. The cluster analysis was conducted to assess differences in flour quality parameters among genotypes based on CF. Clusters 1 and 4 were typified by lower CF (5.70 and 5.23, respectively), higher DS, pentosan content, and SRC values. Cluster 2 with a relative good CF (6.47) and Cluster 3 with the best cookie quality, high CF (7.32) and low firmness, and the lowest DS, TP, WSP content, and sucrose SRC values.     

Distribution of Protein Composition in Bread Wheat Flour Mill Streams and Relationship to Breadmaking Quality

Wheat protein quantity and composition are important parameters for wheat baking quality. The objective of this study was to use fractionation techniques to separate the proteins of flour mill streams into various protein fractions, to examine the distribution of these protein fractions, and to establish a relationship between protein composition and breadmaking quality. Nine break streams, nine reduction streams, and three patent flours obtained from three samples of Nekota (a hard red winter wheat) were used in this study. A solution of 0.3M NaI + 7.5% 1-propanol was used to separate flour protein into monomeric and polymeric proteins. The protein fractions, including gliadin, albumin+globulin, HMW-GS, and LMW-GS, were precipitated with 0.1M NH₄Ac-MeOH or acetone. The fractions were statistically analyzed for their distribution in the mill streams. The quantities of total flour protein and protein fractions in flour were significantly different among mill streams. The ratio of polymeric to monomeric proteins in break streams was significantly greater than in the reduction streams. The relationship between protein composition and breadmaking quality showed that the quantities of total flour protein, albumin+ globulin, HMW-GS, and LMW-GS in flour were significantly and positively correlated with loaf volume. The ratio of HMW-GS to LMW-GS had little association with loaf volume. The gliadin content in total flour protein was negatively and significantly correlated with loaf volume. These results indicated that the quantity and composition of protein among the mill streams was different, and this resulted in differences in breadmaking quality.     

Effect of Soft Kernel Texture on the Milling Properties of Soft Durum Wheat

Worldwide, nearly 20 times more common wheat (Triticum aestivum) is produced than durum wheat (T. turgidum subsp. durum). Durum wheat is predominately milled into coarse semolina owing to the extreme hardness of the kernels. Semolina, lacking the versatility of traditional flour, is used primarily in the production of pasta. The puroindoline genes, responsible for kernel softness in wheat, have been introduced into durum via homoeologous recombination. The objective of this study was to determine what impact the introgression of the puroindoline genes, and subsequent expression of the soft kernel phenotype, had on the milling properties and flour characteristics of durum wheat. Three grain lots of Soft Svevo and one of Soft Alzada, two soft‐kernel back‐cross derived durum varieties, were milled into flour on the modified Quadrumat Senior laboratory mill at 13, 14, and 16% temper levels. Samples of Svevo (a durum wheat and recurrent parent of Soft Svevo), Xerpha (a soft white winter wheat), and Expresso (a hard red spring wheat) were included as comparisons. Soft Svevo and Soft Alzada exhibited dramatically lower single‐kernel characterization system kernel hardness than the other samples. Soft Svevo and Soft Alzada had high break flour yields, similar to the common wheat samples, especially the soft hexaploid wheat, and markedly greater than the durum samples. Overall, Soft Svevo and Soft Alzada exhibited milling properties and flour quality comparable, if not superior, to those of common wheat.     

Significance of Wheat Flour Particle Size on Sponge Cake Baking Quality

We evaluated the effect and magnitude of flour particle size on sponge cake (SC) baking quality. Two different sets of wheat flours, including flours of reduced particle size obtained by regrinding and flour fractions of different particle size separated by sieving, were tested for batter properties and SC baking quality. The proportion of small particles (<55 μm) of flour was increased by 11.6–26.9% by regrinding. Despite the increased sodium carbonate solvent retention capacity, which was probably a result of the increased starch damage and particle size reduction, reground flour exhibited little change in density and viscosity of flour‐water batter and produced SC of improved volume by 0.8–15.0%. The volume of SC baked from flour fractions of small (<55 μm), intermediate (55–88 μm), and large (>88 μm) particles of soft and club wheat was in the range of 1,353–1,450, 1,040–1,195, and 955–1,130 mL, respectively. Even with comparable or higher protein content, flour fractions of intermediate particle size produced larger volume of SC than flour fractions of large particle size. The flour fractions of small particle size in soft white and club wheat exhibited lower flour‐water batter density (102.6–105.9 g/100 mL) than did those of large and intermediate particle fractions (105.2–108.2 g/100 mL). The viscosity of flour‐water batter was lowest in flour fractions of small particle size, higher in intermediate particles, and highest in large particles. Flour particle size exerted a considerable influence on batter density and viscosity and subsequently on SC volume and crumb structure. Fine particle size of flour overpowered the negative effects of elevated starch damage, water absorption, and protein content in SC baking.     

Bran Characteristics and Bread‐Baking Quality of Whole Grain Wheat Flour

Variations in physical and compositional bran characteristics among different sources and classes of wheat and their association with bread‐baking quality of whole grain wheat flour (WWF) were investigated with bran obtained from Quadrumat milling of 12 U.S. wheat varieties and Bühler milling of six Korean wheat varieties. Bran was characterized for composition including protein, fat, ash, dietary fiber, phenolics, and phytate. U.S. soft and club wheat brans were lower in insoluble dietary fiber (IDF) and phytate content (40.7–44.7% and 10.3–17.1 mg of phytate/g of bran, respectively) compared with U.S. hard wheat bran (46.0–51.3% and 16.5–22.2 mg of phytate/g of bran, respectively). Bran of various wheat varieties was blended with a hard red spring wheat flour at a ratio of 1:4 to prepare WWFs for determination of dough properties and bread‐baking quality. WWFs with U.S. hard wheat bran generally exhibited higher dough water absorption and longer dough mixing time, and they produced smaller loaf volume of bread than WWFs of U.S. soft and club wheat bran. WWFs of two U.S. hard wheat varieties (ID3735 and Scarlet) produced much smaller loaves of bread (<573 mL) than those of other U.S. hard wheat varieties (>625 mL). IDF content, phytate content, and water retention capacity of bran exhibited significant relationships with loaf volume of WWF bread, whereas no relationship was observed between protein content of bran and loaf volume of bread. It appears that U.S. soft and club wheat bran, probably owing to relatively low IDF and phytate contents, has smaller negative effects on mixing properties of WWF dough and loaf volume of bread than U.S. hard wheat bran.     

Use of Two Endoxylanases with Different Substrate Selectivity for Understanding Arabinoxylan Functionality in Wheat Flour Breadmaking

A Bacillus subtilis endoxylanase (XBS) with a strong selectivity for hydrolysis of water‐unextractable arabinoxylan (WU‐AX) and an Aspergillus aculeatus endoxylanase (XAA) with a strong selectivity for hydrolysis of water‐extractable arabinoxylan (WE‐AX) were used in straight‐dough breadmaking with two European wheat flours. Dough, fermented dough, and bread characteristics with different levels of enzyme addition were evaluated with a strong emphasis on the arabinoxylan (AX) population. The WU‐AX solubilized by XBS during breadmaking were mainly released during mixing and had higher molecular weight, in contrast to their counterparts solubilized by XAA, which were mainly released during fermentation and had lower molecular weight. This coincided with increased loaf volume with XBS and a negative to positive loaf volume response with XAA. Bread firmness and dough extract viscosity also were affected by endoxylanase addition. Results confirmed that WU‐AX are detrimental for breadmaking, while WE‐AX and solubilized AX with medium to high molecular weight have a positive impact on loaf volume.     

Effect of Single‐Pass and Multipass Milling Systems on Whole Wheat Durum Flour and Whole Wheat Pasta Quality

Single‐pass and multipass milling systems were evaluated for the quality of whole wheat durum flour (WWF) and the subsequent whole wheat (WW) spaghetti they produced. The multipass system used a roller mill with two purifiers to produce semolina and bran/germ and shorts (bran fraction). The single‐pass system used an ultracentrifugal mill with two configurations (fine grind, 15,000 rpm with 250 μm mill screen aperture; and coarse grind, 12,000 rpm with 1,000 μm mill screen aperture) to direct grind durum wheat grain into WWF or to regrind the bran fraction, which was blended with semolina to produce a reconstituted WWF. Particle size, starch damage, and pasting properties were similar for direct finely ground WWF and multipass reconstituted durum flour/fine bran blend and for direct coarsely ground WWF and multipass reconstituted semolina/coarse bran blend. The semolina/fine bran blend had low starch damage and had desirable pasting properties for pasta cooking. WW spaghetti was better when made with WWF produced using the multipass than single‐pass milling system. Mechanical strength was greatest with spaghetti made from the semolina/fine bran or durum flour/fine bran blends. The semolina/fine bran and semolina/coarse bran blends made spaghetti with high cooked firmness and low cooking loss.     

Agronomic and Quality Performance of Progeny Lines Derived from Spring Wheat by Durum Wheat Crosses

Hard red spring wheat (Triticum aestivum L. subsp. aestivum) and durum wheat (Triticum turgidum L. subsp. durum (Desf.) Husn) have both been selected for dryland yield potential and high grain protein, although end uses of flour are different. For this study, 14 tetraploid and 10 hexaploid lines were derived from crosses between tetraploid durum wheat and hexaploid hard red spring wheat. Our objective was to determine the impact of genetic exchange between the two classes on agronomic and quality attributes of derived progeny lines. Yield potential of both the tetraploid and hexaploid progeny was lower than the parental types. Polyphenol oxidase levels were higher by almost twofold in the hexaploid group. The tetraploid progeny group had better noodle color than did the hexaploid group. Bread quality of hexaploid group was superior, with loaf volume 362 cm³ higher than that of tetraploid progeny group. In general, the presence of durum wheat genes in the derived hexaploid lines had little impact on most quality traits. The presence or absence of the D genome tended to be the major influence on end use quality traits. Our results suggest that genetic exchange between the two groups has a small effect on end use quality, but low yield potential in the progeny suggests obtaining desirable genetic combinations for plant improvement may be challenging.     

Influence of Kernel Size and Shriveling on Soft Wheat Milling and Baking Quality

Small kernels of soft wheat are sometimes considered to be harder than larger kernels and to have inferior milling and baking characteristics. This study distinguished between kernel size and kernel shriveling. Nine cultivars were separated into large, medium, and small kernels that had no shriveling. Eleven cultivars were separated into sound, moderate, and severely shriveled kernels. Shriveling greatly decreased the amount of flour produced during milling. It adversely affected all other milling quality characteristics (ash content, endosperm separation index, and friability). Shriveled kernels produced flour that had inferior soft wheat baking qualities (smaller cookie diameter and higher alkaline water retention capacity). In contrast, test weight and milling qualities were independent of kernel size. Small, nonshriveled kernels had slightly better baking quality (larger cookie diameter) than larger nonshriveled kernels. Small kernels were softer than large kernels (measured by break flour yield, particle size index, and flour particle size). Small nonshriveled kernels did not have diminished total flour yield potential or other reduced flour milling characteristics. Those observations suggest a possibility of separating small sound kernels from small shriveled kernels to improve flour yield and the need to improve dockage testing estimation techniques to distinguish between small shriveled and small nonshriveled kernels.     

Environmental Influences on Flour Composition,Dough Rheology,and Baking Quality of Spring Wheat

The highly variable environmental conditions across the Pacific Northwest (PNW) influence the milling and baking quality of wheat grain produced in this region. This study was conducted to compare the flour composition, dough rheology, and baking quality of soft and hard spring wheat grain produced in diverse environments. Thirteen soft and five hard spring wheat cultivars were grown at Lind, WA (semiarid) and Fairfield, WA (high precipitation) for three years. Grain was evaluated for flour composition, rheology, and experimental baked product quality. Flour composition, rheological properties, and baking qualities were primarily influenced by the environment. Protein contents, microSDS values, and water absorption levels were significantly (P < 0.0001) higher for all cultivars grown at Lind compared with those from Fairfield. Cookie diameters were larger (P < 0.0001) for soft flours from Fairfield, whereas loaf volumes were higher (P < 0.0001) for hard wheat flours from Lind. Results indicate that producing soft or hard wheat outside of its optimal climatic zone reduces experimental baked product quality.     

Nutritional Profile of Whole‐Grain Soft Wheat Flour

Whole‐grain wheat flour is used in baking to increase fiber content and to provide vitamins from the bran layers of the kernel. We surveyed whole‐grain soft flour samples from North America to determine the nutritional profile using recently revised fiber quantification protocols, Codex 2009.1. Standard compositional and vitamin analyses were also included in the survey. Three separate studies were included in the survey: sampling of commercial whole‐grain soft wheat flour, a controlled study of two cultivars across three years and two locations, and a regional study of soft white and soft red grain from commercial grain production. The Codex method for fiber measurement estimated total fiber concentration in the commercial sampling at 15.1 g/100 g, dry weight basis (dwb). In the controlled research trial, the largest source of variation in total fiber concentration was attributed to year effects, followed by genotype effects. For the two locations used in this study, location effects on fiber concentration were significant but an order of magnitude less important than the year and genotype effects. The third study of regional variation within North America found limited variation for total fiber, with the resistant oligosaccharide fraction having the greatest variation in concentration. When all three studies were combined into a meta‐analysis, the average total fiber concentration was 14.8 g/100 g dwb. In the meta‐analysis, concentrations of folate, thiamin, riboflavin, niacin, and pyridoxine were lower than in previous summary reports. Vitamin E and pantothenic acid were the exceptions, with concentrations that were nearly identical to previous standard reports. Several other recent studies also point to current cultivars and production systems as producing lower concentrations of the essential vitamins than previously reported. The results suggest that vitamin concentrations in diets of populations using grain‐based diets from modern cereal‐production systems may require review to determine if previous assumptions of vitamin consumption are accurate.     

Laboratory Milling Method for Whole Grain Soft Wheat Flour Evaluation

Whole grain wheat products are a growing portion of the foods marketed in North America, yet few standard methods exist to evaluate whole grain wheat flour. This study evaluated two flour milling systems to produce whole grain soft wheat flour for a wire‐cut cookie, a standard soft wheat product. A short‐flow experimental milling system combined with bran grinding in a Quadro Comil produced a whole grain soft wheat flour that made larger diameter wire‐cut cookies than whole grain flour from a long‐flow experimental milling system. Average cookie diameter of samples milled on the short‐flow mill was greater than samples milled on the long‐flow system by 1 cm/two cookies (standard error 0.09 cm). The long‐flow milling system resulted in more starch damage in the flour milling than did the short‐flow system. The short‐flow milling system produced flours that were useful for discriminating among wheat cultivars and is an accessible tool for evaluating whole grain soft wheat quality.     

Protein Allelic Composition,Dough Rheology,and Baking Characteristics of Flour Mill Streams from Wheat Cultivars with Known and Varied Baking Qualities

Flour mill streams obtained by milling grain of 10 bread wheat cultivars grown in the Skopje region of Macedonia were analyzed for rheological and breadmaking quality characteristics and for composition of gliadins and HMW‐GS. The objective of this study was to examine the relationships between the composition of gluten proteins and breadmaking quality, as well as to determine the importance of gluten proteins for technological quality of flour mill streams. The grain was milled in an experimental mill according to a standardized milling procedure, with three break and three reduction passages. The addition of two vibratory finishers in the milling scheme enabled better separation of bran. A small‐scale baking method for evaluation of the breadmaking properties was developed, and electrophoretic methods including acid‐PAGE and SDS‐PAGE were used to determine the composition of the gluten proteins. There were significant differences in the degree of dough softening of individual and total flour fractions of the flour mill streams for cultivars with different alleles from six loci, for farinograph water absorption from seven loci, and for bread loaf volume and crumb quality score from six loci. The Glu‐1 quality scores for the wheat cultivars investigated were 3–9 and proved to be a useful indicator of breadmaking quality. The novel feature of the investigation related to the breadmaking potential of the flour mill streams compared with straight‐run flours.     

Effect of Nitrogen Fertilization on Quantity of Flour Protein Components,Dough Properties,and Breadmaking Quality of Wheat

Three winter wheat varieties with differing breadmaking quality were grown at two locations in two years at 0 or 3 × 60 kg of nitrogen application. The effect of nitrogen on amount of different components of gluten proteins was determined by reverse-phase HPLC. A high amount of nitrogen led generally to a significant increase of total protein content. However, this increase was obvious only for the gluten proteins; albumins and globulins remained nearly unaffected. The effect of increased protein content on gliadin to glutenin (gli-glu) ratio was inconsistent. While increased protein content increased the gli-glu ratio in the variety Capo, the opposite was true for the variety Renan. Gli-glu ratio of the variety Lindos showed no discernible tendency. As total protein content increased, the ratio of low molecular weight (LMW) to high molecular weight (HMW) glutenins decreased consistently, i.e., in all varieties, in both years and locations. Change of LMW to HMW ratio showed a significant negative correlation to sedimentation value and bread volume. There was no consistent change in the ratio between x- and y-type HMW subunits due to fertilization, as could be shown by densitometric measurements on SDS-PAGE gels. This ratio appeared to be dependent on the genotype and has decreased with decreasing quality. The amount of x-type subunits correlated closely with sedimentation value and bread volume. These results suggest that ratio of HMW glutenins, especially x-type subunits, to total protein content could be the best early detectable parameter with high predictive value for breadmaking quality.