Quantitative Assessment of Gas Cell Development During the Proofing of Dough by Magnetic Resonance Imaging and Image Analysis

The structure of bread crumb is an important factor in consumer acceptance of bakery products. The noninvasive monitoring of the gas cell formation during the proofing of dough can aid in understanding the mechanisms governing the crumb appearance in the baked product. The development of gas cells during the proofing of dough was monitored in a noninvasive manner using magnetic resonance imaging (MRI) at 4.7‐T. The acquired MRI time series were analyzed quantitatively using image analysis (IA) techniques. The effects of both kneading temperature and mechanical damage by molding were studied. When additional rheological stress was introduced during molding, a more heterogeneous (coarse) gas cell size distribution was observed, and the dough had a smaller specific volume (as measured by MRI). These characteristics were preserved in the bread crumb structure after baking. The fast‐deformation during molding also resulted in an isotropic growth of the dough during proofing, whereas slow‐deformation during molding resulted in anisotropic growth. This can be related to a better conservation of stress in the dough under a moderate molding operation. A higher temperature during kneading also resulted in a coarser distribution of the gas cells and a smaller MRI specific dough volume. No effect of kneading temperature on the growth anisotropy could be detected, however. This indicates that temperature has a smaller effect on the conservation of stress in the dough than molding. The current work illustrates the capability of MRI/IA for understanding and predicting the influence of food processing parameters on consumer‐relevant features in a food product (bread).     

Localization of puroindoline-a and lipids in bread dough using confocal scanning laser microscopy

Puroindolines are lipid-binding proteins from wheat flour that play a significant role in bread crumb texture. The localization of wheat flour lipids and puroindoline-a (PIN-a) in bread dough was studied by confocal scanning laser microscopy (CSLM). Wheat lipids were located around gas cells (GC) and embedded within the protein-starch matrix (SPM) of the dough. PIN-a was mainly located in the matrix of dough, where it was associated with lipids. In contrast, in defatted dough, PIN-a was found around GC. Addition of puroindolines in bread dough induced a defatting of the gas bubble surface and a decrease of the lipid vesicles and/or droplet size embedded within the SPM. Therefore, puroindolines control the lipid partitioning within the different phases of dough, a phenomenon that should have important consequence on the gas bubble expansion and GC formation in the further stages (fermentation, baking) of the bread-making process.     

Evaluation of Various Baking Methods for Polished Wheat Flours

Flour qualities of polished wheat flours of three fractions, C‐1 (100–90%), C‐5 (60–50%), and C‐8 (30–0%), obtained from hard‐type wheat grain were used for the evaluation of four kinds of baking methods: optimized straight (OSM), long fermentation (LFM), sponge‐dough (SDM) and no‐time (NTM) methods. The dough stability of C‐5 in farinograph mixing was excellent and the maturity of polished flour doughs during storage in extensigraph was more improved than those of the commercial wheat flour (CW). There were no significant differences in the viscoelastic properties of CW dough after mixing, regardless of the baking method, while those of polished flour doughs were changed by the baking method; this tendency became clear after fermentation. The polished flours could make a better gluten structure in the dough samples after mixing or fermentation using LFM and SDM, as compared with other baking methods. Baking qualities such as specific volume and storage properties of breads from all polished flours made with SDM increased more than with other methods. In addition, viscoelastic properties of C‐5 and C‐8 doughs fermented by SDM were similar to those of CW, and the C‐5 breadcrumb showed softness similar to that of the CW. Also, SDM could make C‐5 bread with significantly higher elasticity and cohesiveness after storage for five days when compared with CW bread. Therefore, SDM with long fermentation, as compared with other baking methods, was considered suitable for use with polished flours to give better effects on dough properties during fermentation, resulting in more favorable bread qualities.     

Rheological Properties of Full-Formula Doughs Derived from Near-Isogenic 1BL/1RS Translocation Lines

Four pairs of near-isogenic wheat lines, with and without the 1BL/1RS translocation, and differing at the Glu-1 loci (coding for high molecular weight [HMW] glutenin subunits) were evaluated for their dough mixing properties, dough stickiness, and baking performance. In all 1BL/1RS translocation lines, weakening of the dough consistency occurred within 2 min past peak time. The full-formula dough from every 1BL/1RS translocation line exhibited poor dough mixing characteristics and increased stickiness compared to the corresponding wheat control. The HMW glutenin subunits coded by the Glu-A1 locus had no apparent effect on mixing properties, but did have a slight effect on the dough stickiness at two of the four stages of dough mixing. Glu-B1 and Glu-D1 loci encoded glutenin subunits produced significant changes in dough mixing properties and dough stickiness, respectively. With respect to baking performance, there was no significant difference between loaf volumes of 1BL/1RS versus control wheats for three of four near-isogenic pairs. Within the 1RS-group, the translocation lines containing HMW glutenin subunits 5+10 produced bread with greater loaf volumes than the pairs containing its allelic counterpart 2+12. Loaf volume was not influenced by the subunits associated with the Glu-B1 loci. In general, the breads baked from 1BL/1RS translocation lines had a relatively poor crumb and crust quality and contained larger gas cells than the wheat controls. In comparing isogenic pairs, the magnitude of the difference in loaf volume between the control wheat and the corresponding 1BL/1RS translocation line was greater in the pair unique for HMW subunits 5+10; the difference was primarily due to the stronger mixing properties of the wheat control.     

Effects of Flour Strength,Baking Absorption,and Processing Conditions on the Structure and Mechanical Properties of Bread Crumb

The objective of this study was to determine the effects of flour type, baking absorption, variation in sheeting, and dough proofing time on the density, crumb grain (visual texture), and mechanical properties (physical texture) of bread crumb. All response variables were measured on the same bread crumb specimens. Bread loaves were prepared by a short‐time bread‐making process using four spring wheat flours of varying strength. After crumb density measurement, digital image analysis (DIA) was used to determine crumb grain properties including crumb brightness, cell size, cell wall thickness, and crumb uniformity. Tensile tests were performed on bone‐shaped specimens cut from the same bread slices used for DIA to obtain values for Young's modulus, fracture stress, fracture strain, and fracture energy. Proof time had the most profound influence on the bread with substantial effects on loaf volume, crumb density, crumb brightness, and grain, as well as crumb mechanical properties. Increasing proof time resulted in higher loaf volume, lower crumb density and brightness, coarser crumb with fewer and larger cells with thicker cell walls, and weaker crumb tensile properties. Varying flour type also led to significant differences in most of the measured crumb parameters that appeared to correspond to differences in gluten strength among the flour samples. With increasing flour strength, there was a clear trend to increasing loaf volume, finer and more uniform crumb grain, and stronger and more extensible bread crumb. Increasing baking absorption had virtually no effect on crumb structure but significantly weakened crumb strength and increased fracture strain. In contrast, varying the number of sheeting passes had a minor effect on crumb cellular structure but no effect on mechanical properties. The experimental data were consistent with a cause‐effect relationship between flour strength and the tensile strength of bread crumb arising as a result of stronger flours exhibiting greater resistance to gas cell coalescence, thereby having fewer crumb defects.     

Effect of bread baking on the bioavailability of hydrogen-reduced iron powder added to unenriched refined wheat flour

Elemental iron powders are widely used to fortify flour and other cereal products. Our objective was to test the hypothesis that baking enhances the bioavailability of elemental iron powders by oxidizing Fe(0) to Fe(2+) or Fe(3+). An in vitro digestion/Caco-2 cell culture model and a piglet model were used to measure bioavailability. Bread flour, either unfortified or fortified with hydrogen-reduced (HR) iron powder or FeSO(4) (300 mg Fe/kg flour), was baked into bread. For the in vitro studies, bread samples were treated with pepsin at pH 2, 3, 4, 5, 6, or 7 and subsequently incubated with pancreatic enzymes at pH 7 in a chamber positioned above monolayers of cultured Caco-2 cells. Ferritin formation in the cells was used as an index of iron bioavailability. Ferritin formation in cells fed HR Fe bread was similar to cells fed FeSO(4) bread when the peptic digestion was conducted at a pH 2 but lower when the peptic phase was conducted at pH 3, 4, 5, 6, or 7 (P < 0.05). Pig diets containing 35% dried bread were prepared and fed to cross-bred (Hampshire x Landrace x Yorkshire) anemic pigs in two studies. The rate of increase in hemoglobin Fe over the feeding period was used to calculate relative biological value (RBV), an index of iron bioavailability. In the first pig study, RBV of HR Fe added to flour prior to baking was 47.9% when compared to FeSO(4) fortified flour (P < 0.05). In the second pig study, a third treatment consisting of unfortified bread with HR iron added during diet mixing (after bread baking) was included. RBVs of the HR Fe diet (Fe added after baking) and HR Fe diet (Fe added before baking) were 40.1% and 53.5%, respectively, compared to the FeSO(4) diet. Differences in RBV between the HR Fe (before and after baking) and FeSO(4) (before baking) treatment groups were significant, but the difference between the before and after HR treatment groups was not significant. We conclude that bread baking does not enhance the bioavailability of elemental iron powders.     

Bran Characteristics and Bread‐Baking Quality of Whole Grain Wheat Flour

Variations in physical and compositional bran characteristics among different sources and classes of wheat and their association with bread‐baking quality of whole grain wheat flour (WWF) were investigated with bran obtained from Quadrumat milling of 12 U.S. wheat varieties and Bühler milling of six Korean wheat varieties. Bran was characterized for composition including protein, fat, ash, dietary fiber, phenolics, and phytate. U.S. soft and club wheat brans were lower in insoluble dietary fiber (IDF) and phytate content (40.7–44.7% and 10.3–17.1 mg of phytate/g of bran, respectively) compared with U.S. hard wheat bran (46.0–51.3% and 16.5–22.2 mg of phytate/g of bran, respectively). Bran of various wheat varieties was blended with a hard red spring wheat flour at a ratio of 1:4 to prepare WWFs for determination of dough properties and bread‐baking quality. WWFs with U.S. hard wheat bran generally exhibited higher dough water absorption and longer dough mixing time, and they produced smaller loaf volume of bread than WWFs of U.S. soft and club wheat bran. WWFs of two U.S. hard wheat varieties (ID3735 and Scarlet) produced much smaller loaves of bread (<573 mL) than those of other U.S. hard wheat varieties (>625 mL). IDF content, phytate content, and water retention capacity of bran exhibited significant relationships with loaf volume of WWF bread, whereas no relationship was observed between protein content of bran and loaf volume of bread. It appears that U.S. soft and club wheat bran, probably owing to relatively low IDF and phytate contents, has smaller negative effects on mixing properties of WWF dough and loaf volume of bread than U.S. hard wheat bran.     

Impact of redox agents on the extractability of gluten proteins during bread making

The gluten proteins gliadin and glutenin are important for dough and bread characteristics. In the present work, redox agents were used to impact gluten properties and to study gliadin-glutenin interactions in bread making. In control bread making, mixing increased the extractability of glutenin. The level of SDS-extractable glutenin decreased during fermentation and then further in the oven. The levels of extractable alpha- and gamma-gliadin also decreased during bread baking due to gliadin-glutenin polymerization. Neither oxidizing nor reducing agents had an impact on glutenin extractabilities after mixing. The redox additives did not affect omega-gliadin extractabilities during bread making due to their lack of cysteine residues. Potassium iodate (0.82-2.47 micromol/g of protein) and potassium bromate (1.07-3.17 micromol/g of protein) increased both alpha- and gamma-gliadin extractabilities during baking. Increasing concentrations of glutathione (1.15-3.45 micromol/g of protein) decreased levels of extractable alpha- and gamma-gliadins during baking. The work not only demonstrated that, during baking, glutenin and gliadin polymerize through heat-induced sulfhydryl-disulfide exchange reactions, but also demonstrated for the first time that oxidizing agents, besides their effect on dough rheology and hence bread volume, hinder gliadin-glutenin linking during baking, while glutathione increases the degree of covalent gliadin to glutenin linking.     

Effects of Monoglycerides of Varying Fatty Acid Chain Length and Mixtures Thereof on Sponge‐and‐Dough Breadmaking Quality

Monoglycerides are widely used in the baking industry because of their antistaling effects, mainly suppressing crumb firming. Commercial monoglycerides are normally prepared from hydrogenated fats, with stearate being the most common fatty acid. In a previous study, monoglycerides such as monopalmitate (C16) and monostearate (C18) had positive effects on Canadian short process bread but no improvements on sponge‐and‐dough process (SDP) bread. The objective of this study was to investigate the effects of saturated monoglycerides of varying fatty acid chain length (C14–C22) on SDP breadmaking quality by using volume judgment, crumb image analysis, and texture measurements. Higher levels (1.00–1.50%) of all monoglycerides (C14, C16, and C18) significantly (P < 0.05) increased loaf volume and cell diameter. The larger cell diameter with increasing levels of these monoglycerides may have resulted from softer, more extensible dough handling properties and greater gas cell stability during baking. Addition of C16 and C18 caused the largest increase in crumb softness with increasing monoglyceride levels but showed relatively low resilience, which might be related to larger loaf volume (i.e., lower density of bread). However, addition of blended monoglycerides C14+C16 increased crumb softness and loaf volume while partially retaining resilience. Each monoglyceride had a different function in breadmaking quality and somewhat positive effects on SDP.     

Effects of Yeast Freezing in Frozen Dough

The effects of freezing and frozen storage of bread dough and compressed yeast on bread quality were studied. Besides, the effects of compressed yeast freezing on cell viability, gas production and release of substances by the yeast cells were examined. Freezing and frozen storage of dough made with fresh yeast had more negative effects on baking quality than the addition of frozen yeast to dough. When the compressed yeast is frozen and stored at ‐18°C, the CO₂ production decreased, while the amount of dead cells, the total protein, and the total reducing substances leached from the yeast increased as the length of yeast frozen storage increased. SDS‐PAGE showed that the substances leached from frozen yeast caused an increase in the solubility of some gluten proteins. On the other hand, size‐exclusion chromatography (SEC) pointed out that the relative amount of two protein fractions of low molecular weight leached from frozen yeast increased for longer yeast frozen storage periods. The yeast leachates had an adverse effect on loaf volume.     

Influences of Baking and Thawing Conditions on Quality of Par‐Baked French Bread

We examined the effects of baking time and temperature for the preparation of par‐baked French bread, and of thawing and second baking conditions on the characteristics of bread prepared from par‐baked bread. Par‐baked French bread with loaf volume and crumb structure comparable to fully baked bread (control) was obtained with ≥6 min baking at 218°C, which increased the crumb temperature to 97°C. Freezing, thawing, and second baking of par‐baked bread decreased loaf volume by ≥100 mL. The second baking time of par‐baked bread, which was adjusted to have the bread crumb subjected to 97°C for 14 min based on the crumb temperature profile, produced a darker crust of bread compared with the control. The par‐baked bread with 6 min of initial baking at 218°C and frozen at ‐30°C required 12 min of second baking after thawing for 180 min to ≈20°C to produce crust color, crumb moisture, and firmness comparable to that of the control. When thawing time of par‐baked bread was shortened from 180 to 0 min, the second baking time required to yield crust color similar to the control increased from 12 to 16 min. The crumb moisture content was higher in bread baked for 16 min without thawing par‐baked bread than those baked after thawing for 45 or 180 min. Lowering the initial baking temperature of par‐baked bread from 246 to 163°C with the adjustment of baking time from 4 to 12 min decreased crumb firmness of the re‐baked (218°C, 16 min) bread from 2.5 to 1.5 N at 2 hr after baking and from 9.8–10.3 to 6.2–6.3 N at 48 hr.     

Effects of Bran Prehydration on Functional Characteristics and Bread‐Baking Quality of Bran and Flour Blends

The effect of bran prehydration on the composition and bread‐baking quality was determined using bran and flour of two wheat varieties. Bran was hydrated in sodium acetate buffer (50mM, pH 5.3) to 50% moisture at 25 or 55°C for 1.5 or 12 h. The soluble sugar content in bran increased with prehydration. Decreases in phytate and soluble fiber were observed in prehydrated bran, but insoluble fiber was not affected by prehydration. Likewise, free phenolic content decreased, and there was little change in the content of bound phenolics in prehydrated bran. The compositional changes were greater in the bran prehydrated at 55 than at 25°C, and for 12 than for 1.5 h. Addition of prehydrated bran delayed dough development of bran and flour blends and slightly increased water absorption of dough. A higher loaf volume of fresh bread and lower crumb firmness of bread stored for 10 days were observed in bread containing bran prehydrated at 25°C than in bread containing nonhydrated bran or bran prehydrated at 55°C. The prehydration of bran at 25°C before being incorporated into refined flour for dough mixing improved bread quality by altering bran compositional properties, allowing enough water to be absorbed by fibrous materials in the bran and preventing water competition among dough constituents.     

Modeling of Dough Mixing Profile Under Thermal and Nonthermal Constraint for Evaluation of Breadmaking Quality of Hard Spring Wheat Flour

This research was initiated to investigate associations between flour breadmaking traits and mixing and empirical dough rheological properties under thermal stress. Thirty hard spring wheat flour samples were analyzed by a Mixolab standard procedure. Mixolab profiles were divided into six different stages, and torque measurements of individual stages were modeled by nonlinear curve fitting using a compound of two solution searching procedures, multidimensional unconstrained nonlinear minimization and genetic algorithm. Mixing patterns followed exponential equations. Dough torque patterns under heat constraint, specifically dough thermal weakening and pasting profiles, were described by a sigmoid logistic equation as a function of time. Dough stability during heating appeared important for bread loaf volume increase from significant correlations between bread loaf volume and parameters generated from models of a dough thermal weakening stage. Multivariate continuum regression was employed to calibrate prediction models of baking traits using Mixolab parameters. Coefficients of determination estimated from prediction models and cross‐validation were greater than 0.98 for bake water absorption, mixing time, and bread loaf volume, indicating that the Mixolab parameters have a potential to enhance evaluation of flour breadmaking quality.     

Food allergy to wheat products: the effect of bread baking and in vitro digestion on wheat allergenic proteins. A study with bread dough, crumb, and crust.

The effect of baking and digestion on the allergenicity of wheat flour proteins has been studied. Pooled sera of patients suffering from food allergy to wheat products were tested for IgE binding to the proteins of the wheat dough and of the bread crumb and crust, before and after being in vitro digested. During in vitro digestion, the IgE binding protein components of the unheated dough tended to disappear, whereas a permanence of IgE recognition was evident for both the bread crumb and crust. This indicates that the baking process increases the resistance of the potential allergens of the wheat flour to proteolytic digestion, allowing them to reach the gastrointestinal tract, where they can elicit the immunological response. Therefore, the effects of baking must be carefully considered in studying food allergies to wheat products.     

Role of Starch Granules in Controlling Expansion of Dough During Baking

The role of starch granules in the expansion of doughs during baking was investigated using artificial flours made from dry vital wheat gluten and wheat starch, potato starch, or tapioca starch. The three starches were selected because of their diverse gelatinization properties. Baking tests on flour from tapioca starch gave the largest loaf volume and the most extensive postbaking shrinkage. Potato starch flour gave the smallest volume and the least shrinkage. Amylograph test data, dough expansion under decreased pressure, progress of expansion during baking, and scanning electron microscopy revealed the role starch granules play in ideal baking conditions. Starch granules should not gelatinize early in the baking cycle as potato starch does but should gelatinize later in the baking cycle as wheat starch does. This prevents early setting of the dough which inhibits expansion. Starch granules should not disrupt and fuse together during gelatinization as tapioca starch does, forming an impermeable gas membrane. Granules should gelatinize individually as wheat starch does, causing a disruption of cell membranes which prevents shrinkage of the loaf during cooling after baking.     

HPLC Determination of Stability and Distribution of Added Folic Acid and Some Endogenous Folates During Breadmaking

Bread flour was spiked with folic acid (1.40 mg/lb or 3.08 μg/g of flour) and processed into bread by the sponge and dough method. Changes that occurred to added folic acid and endogenous folate contents through different processing stages, including sponge formation, proofing, and baking, were assessed by reversed‐phase ion‐pair HPLC combined with UV and fluorometric detection. Sample extraction required α‐amylase and rat plasma deconjugase digestion, and sample preparation required purification by solid‐phase extraction. Added folic acid was measured by monitoring UV absorption at 280 nm. Four selected forms of endogenous folates including tetrahydrofolate (THF), 5‐formyl‐THF, 10‐formylfolate, and 5‐methyl‐THF were identified and quantified throughout the bread processing using a fluorescence excitation wavelength of 290 nm and emission wavelength of 350 or 450 nm. Data indicate a relatively good stability of added folic acid and native folates to the baking process, and increased endogenous folate contents in dough and bread as compared with the flour from which they were made.     

Influence of Amylose Content on Properties of Wheat Starch and Breadmaking Quality of Starch and Gluten Blends

The effects of amylose content on thermal properties of starches, dough rheology, and bread staling were investigated using starch of waxy and regular wheat genotypes. As the amylose content of starch blends decreased from 24 to 0%, the gelatinization enthalpy increased from 10.5 to 15.3 J/g and retrogradation enthalpy after 96 hr of storage at 4°C decreased from 2.2 to 0 J/g. Mixograph water absorption of starch and gluten blends increased as the amylose content decreased. Generally, lower rheofermentometer dough height, higher gas production, and a lower gas retention coefficient were observed in starch and gluten blends with 12 or 18% amylose content compared with the regular starch and gluten blend. Bread baked from starch and gluten blends exhibited a more porous crumb structure with increased loaf volume as amylose content in the starch decreased. Bread from starch and gluten blends with amylose content of 19.2–21.6% exhibited similar crumb structure to that of bread with regular wheat starch which contained 24% amylose. Crumb moisture content was similar at 5 hr after baking but higher in bread with waxy starch than in bread without waxy starch after seven days of storage at 4°C. Bread with 10% waxy wheat starch exhibited lower crumb hardness values compared with bread without waxy wheat starch. Higher retrogradation enthalpy values were observed in breads containing waxy wheat starch (4.56 J/g at 18% amylose and 5.43 J/g at 12% amylose) compared with breads containing regular wheat starch (3.82 J/g at 24% amylose).     

Changes in Distribution of Isoflavones and β‐Glucosidase Activity During Soy Bread Proofing and Baking

Bread made partially with soy may represent a viable alternative for increasing soy consumption in populations consuming Western diets. The potential health‐promoting activity of soy isoflavones may depend on their abundance and chemical form. The objective of this study was to characterize the changes in isoflavone distribution and β‐glucosidase activity during the soy breadmaking process. Soy bread ingredients were combined and mixed to form a dough that was subsequently proofed at 48°C for 1–4 hr and baked at 165°C for 50 min to produce breads. The isoflavone composition and β‐glucosidase activity in bread ingredients, doughs, and breads were monitored. Soy ingredients and wheat flour (not bread yeast) were the major contributors of the β‐glucosidase activity in bread. No degradation of isoflavones was observed during breadmaking but the isoflavone distribution was largely altered. Proofing and baking have important but different roles in changing the isoflavone distribution. Proofing converted isoflavone β‐glucosides to aglycones by highly specific β‐glucosidase activity. Thermal treatment during baking significantly decreased the isoflavone malonylglucosides and increased isoflavone β‐glucosides. Enzyme activity during proofing and the balance between formation and deconjugation of isoflavones during baking determine the isoflavone content and composition in the final product.     

Dough and Baking Properties of High‐Amylose and Waxy Wheat Flours

The dough properties and baking qualities of a novel high‐amylose wheat flour (HAWF) and a waxy wheat flour (WWF) (both Triticum aestivum L.) were investigated by comparing them with common wheat flours. HAWF and WWF had more dietary fiber than Chinese Spring flour (CSF), a nonwaxy wheat flour. Also, HAWF contained larger amounts of lipids and proteins than WWF and CSF. There were significant differences in the amylose and amylopectin contents among all samples tested. Farinograph data showed water absorptions of HAWF and WWF were significantly higher than that of CSF, and both flours showed poorer flour qualities than CSF. The dough of WWF was weaker and less stable than that of CSF, whereas HAWF produced a harder and more viscous dough than CSF. Differential scanning calorimetry data showed that starch in HAWF dough gelatinized at a lower temperature in the baking process than the starches in doughs of WWF and CSF. The starch in a WWF suspension had a larger enthalpy of gelatinization than those in HAWF and CSF suspensions. Amylograph data showed that the WWF starch gelatinized faster and had a higher viscosity than that in CSF. The loaves made from WWF and CSF were significantly larger than the loaves made from HAWF. However, the appearance of bread baked with WWF and HAWF was inferior to the appearance of bread baked with CSF. Bread made with WWF became softer than the bread made with CSF after storage, and reheating was more effective in refreshing WWF bread than CSF bread. Moreover, clear differences in dough and bread samples were revealed by scanning electron microscopy. These differences might have some effect on dough and baking qualities.     

Influence of Bran Particle Size on Bread‐Baking Quality of Whole Grain Wheat Flour and Starch Retrogradation

The influence of bran particle size on bread‐baking quality of whole grain wheat flour (WWF) and starch retrogradation was studied. Higher water absorption of dough prepared from WWF with added gluten to attain 18% protein was observed for WWFs of fine bran than those of coarse bran, whereas no significant difference in dough mixing time was detected for WWFs of varying bran particle size. The effects of bran particle size on loaf volume of WWF bread and crumb firmness during storage were more evident in hard white wheat than in hard red wheat. A greater degree of starch retrogradation in bread crumb stored for seven days at 4°C was observed in WWFs of fine bran than those of coarse bran. The gels prepared from starch–fine bran blends were harder than those prepared from starch–unground bran blends when stored for one and seven days at 4°C. Furthermore, a greater degree of starch retrogradation was observed in gelatinized starch containing fine bran than that containing unground bran after storage for seven days at 4°C. It is probable that finely ground bran takes away more water from gelatinized starch than coarsely ground bran, increasing the extent of starch retrogradation in bread and gels during storage.