Evaluation of parentage testing in the Turkish Holstein population based on 12 microsatellite loci

In the present study, 12 microsatellite loci (ETH10, ETH225, ETH03, TGLA122, TGLA227, BM1824, BM2113, INRA23, SPS115, TGLA126, RM006 and BM1818) were evaluated for their possible use to confirm selected pedigree relationships between 7 bulls, their 21 male offspring, and their 64 second-generation female offspring within the progeny test started in Turkey. The nine loci (BM1824, INRA23, BM2113, SPS115, ETH10, TGLA122, ETH225, TGLA126 and TGLA227) recommended by ISAG displayed high values for the measures of informativeness (allele numbers, heterozygosity, polymorphic information content, frequency of the most common allele, and power of discrimination). When both parents are known calculated combined probability of exclusion was at least 0.999. Range of probability of paternity (POP) values were 0.814–0.9999. Except 3 cases (4.7%), the alleged paternity relationships were confirmed. To have a higher confidence in POP values new loci must be integrated into the set of 9 loci used.     

Genetic analysis of calf market weight and carcass traits in Japanese Black cattle

Heritabilities of and genetic correlations between additive direct and maternal genetic effects for calf market weight, and additive direct genetic effects for carcass traits, were estimated for Japanese Black cattle by REML procedures under 2-trait animal models. Data were collected from calf and carcass markets in Hyogo and Tottori prefectures and analyzed separately by prefecture. Calf market weight was measured on 42,745 and 23,566 calves in Hyogo and Tottori, respectively. Only the fattening animals with calf market weight were extracted from the carcass database and used for estimation. The carcass traits analyzed were carcass weight, ribeye area, rib thickness, subcutaneous fat thickness, yield estimate, beef marbling score, and 4 meat characters (color, brightness, firmness, and texture). Direct and maternal heritabilities for calf market weight were estimated to be 0.22 and 0.07 in Hyogo, and 0.37 and 0.15 in Tottori, respectively. The estimates of heritabilities for carcass traits were moderate to high in both prefectures. The estimates of direct-maternal genetic correlations for calf market weight were positive (0.17) in Hyogo and negative (-0.63) in Tottori. The direct effect for calf market weight was positively correlated with the direct effect for carcass weight (0.87 and 0.56 in Hyogo and Tottori, respectively) but negatively correlated with the direct effect for beef marbling score (-0.10 in both prefectures). The estimates of genetic correlations between the maternal effect for calf market weight and the direct effects for carcass traits varied from -0.13 to 0.34 in Hyogo and from -0.14 to 0.15 in Tottori. Because direct and maternal genetic effects for early growth traits can be evaluated from calf market weight data in the production system of Japanese Black cattle, this information should be incorporated into selection and mating schemes of the breed.     

Comparison of two- and three-way rotational crossing, beef x beef and beef x Brown Swiss composite breed production: postweaning growth and carcass traits

Data collected from steer and bull progeny, fed to a constant final feedlot weight over 11 yr, were used to estimate heterosis in post-weaning feedlot growth and carcass traits in two-way and three-way rotational crossing systems and a breed composite from crossing Hereford, Angus and Charolais breeds. Steer and bull progeny from matings of beef x Brown Swiss-cross sires and dams also were compared with the straight beef breeds and beef crosses. Growth traits evaluated were initial weight on test, 112-d weight, total feedlot average daily gain and total days from initial to final weight. Carcass traits included hot carcass weight, dressing percentage, rib eye area, 12th-rib fat thickness, kidney, pelvic and heart fat, yield grade and marbling score. Heterosis estimates for calves of all crossing systems were significant for initial and 112-d weight and for saving of days in the feedlot, but not for average daily feedlot gain. Heterosis estimates were small and nonsignificant for most carcass traits except for fat traits in specific crosses. Males from Hereford and Angus sires mated to Angus x Hereford dams had higher (P less than .10) backfat than did the parental average. Male progeny from Charolais ranked higher (P less than .10 to P less than .01) than calves from Hereford and Angus sires for most growth traits. Progeny from Charolais sires were more desirable (P less than .10 to P less than .01) for traits related to cutability, but they had less (P less than .05 to P less than .01) marbling than calves of Angus sires.(ABSTRACT TRUNCATED AT 250 WORDS)     

Birth and weaning traits in crossbred cattle from Hereford, Angus, Brahman, Boran, Tuli, and Belgian Blue sires

The objective of this study was to characterize breeds representing diverse biological types for birth and weaning traits in crossbred cattle. Gestation length, calving difficulty, percentage of unassisted calving, percentage of perinatal survival, percentage of survival from birth to weaning, birth weight, BW at 200 d, and ADG were measured in 2,500 calves born and 2,395 calves weaned. Calves were obtained by mating Hereford, Angus, and MARC III (one-fourth Hereford, one-fourth Angus, one-fourth Pinzgauer, and one-fourth Red Poll) mature cows to Hereford or Angus (British breed), Brahman, Tuli, Boran, and Belgian Blue sires. Calves were born during the spring seasons of 1992, 1993, and 1994. Sire breed was significant for all traits (P < 0.002). Offspring from British breeds and the Belgian Blue breed had the shortest gestation length (285 d) when compared with progeny from other sire breeds (average of 291 d). Calving difficulty was greater in offspring from Brahman sires (1.24), whereas the offspring of Tuli sires had the least amount of calving difficulty (1.00). Offspring from all sire breeds had similar perinatal survival and survival from birth to weaning (average of 97.2 and 96.2%, respectively), with the exception of offspring from Brahman sires, which had less (92.8 and 90.4%, respectively). Progeny of Brahman sires were heaviest at birth (45.7 kg), followed by offspring from British breed, Boran, and Belgian Blue sires (average of 42.4 kg). The lightest offspring at birth were from Tuli sires (38.6 kg). Progeny derived from Brahman sires were the heaviest at 200 d (246 kg), and they grew faster (1.00 kg/d) than offspring from any other group. The progeny of British breeds and the Belgian Blue breed had an intermediate BW at 200 d (238 kg) and an intermediate ADG (average of 0.98 kg/d). The progeny of Boran and Tuli sires were the lightest at 200 d (227 kg) and had the least ADG (0.93 kg/d). Male calves had a longer gestation length, had a greater incidence of calving difficulty, had greater mortality to weaning, were heavier, and grew faster than female calves. Sire breed effects can be optimized by selection and use of appropriate crossbreeding systems.     

中国荷斯坦种公牛亲子鉴定及个体识别信息库的建立

为了构建基于微卫星标记的中国荷斯坦种公牛亲子鉴定及个体识别技术平台,本研究选取国际动物遗传学会（ISAG）推荐的12个微卫星标记（BM1824,BM2113,SPS115,ETH10,TGLA122,ETH225,INRA023,TGLA126,TGLA227,BM1818,ETH003和TGLA53）,采用荧光标记毛细管电泳方法,对571头荷斯坦种公牛进行基因型检测。统计结果显示,标记的平均多态信息含量为0．700,平均杂合度为0．735,属于高多态性标记;12个标记的累积排除概率大于0．996,累积一致性概率为4．9×10^-13,将其运用于亲子鉴定和个体识别具有很强的检测效率。此外．通过分析每个标记的检测信号峰图特征,将检测结果与商业化试剂盒进行比较以及利用ISAG参考DNA样品进行等位基因统一命名等手段,建立了标准化的微卫星等位基因分型方法,并初步建立起中国荷斯坦种公牛遗传检测信息库。     

Evaluation of Dorset, Finnsheep, Romanov, Texel, and Montadale breeds of sheep: IV. Survival, growth, and carcass traits of F1 lambs

The objectives of this study were to estimate effects of sire breed (Dorset, Finnsheep, Romanov, Texel, and Montadale), and dam breed (Composite III and Northwestern whiteface) on survival, growth, carcass, and composition traits of F1 lambs. Effects of mating season (August, October, and December) were estimated for survival and growth traits. Data were collected on 4,320 F1 lambs sired by 102 purebred rams over 3 yr. Birth weight was recorded on all lambs, and subsequent BW were adjusted to 56 (weaning), 70, and 140 d of age (n = 3,713, 3,654, and 3,579 observations, respectively). Survival of dam-reared progeny (n = 4,065) to weaning was recorded. Each year, wethers from October matings were slaughtered in three groups at 25, 29, and 33 wk of age to obtain carcass data (n = 546). In addition to standard carcass traits, resistive impedance measurements were recorded on the warm carcass to predict lean mass. Dam breed (P = 0.37) did not influence lamb survival to weaning, but sire breed (P < 0.05) was important. Romanov-sired lambs excelled in survival rate to weaning (94.1%), followed by Finn-sheep (93.0%), Texel (90.7%), Dorset (90.0%), and Montadale (89.1%) sired progeny. Lower (P < 0.01) postweaning growth rate was observed for Texel (267 g/d) and Finnsheep (272 g/d) sired progeny than for Dorset (285 g/d), Montadale (282 g/d), and Romanov (278 g/d) sired progeny. Sire breed and dam breed were generally significant for most carcass traits. Breed differences in distribution of carcass fat and carcass shape were detected; however, carcass composition was similar for all sire breeds when compared at a constant carcass weight. When evaluated at a constant 12th-rib fat depth, carcasses of lambs from Finnsheep, Romanov, and Texel sires produced 1 to 1.5 kg less (P < 0.001) predicted lean mass per lamb than carcasses of lambs from Dorset and Montadale sires. These experimental results provide information about the direct breed effects for survival, growth, and carcass traits of these breeds and their potential use in crossbreeding systems.     

Purebred-crossbred performance and genetic evaluation of postweaning growth and carcass traits in Bos indicus x Bos taurus crosses in Australia

Growth and carcass data on 7,154 cattle from a purebred project and 1,241 cattle from a crossbred project, comprising 916 first-crosses and 325 purebred Brahman controls, were analyzed to estimate genetic parameters, including the genetic correlations between purebred and crossbred performance (rpc). The data also allowed the estimation of sire breed means for various growth and carcass traits. Crossbred calves were produced using 9 Angus, 8 Hereford, 7 Shorthorn, 14 Belmont Red, and 8 Santa Gertrudis sires bred to Brahman dams. These same sires produced 1,568 progeny in a separate purebreeding project. Cattle in both projects were managed under two finishing regimens (pasture and feedlot) to representative market live weights of 400 (domestic), 520 (Korean), and 600 kg (Japanese). The traits studied included live weight at around 400 d of age (400W), hot carcass weight (CWT), retail beef yield percentage (RBY), intramuscular fat percentage (IMF), rump fat depth (P8), and preslaughter ultrasound scanned eye muscle area (SEMA). Estimated breeding values (EBV) of sires from their BREEDPLAN genetic evaluations were used to assess their value in predicting crossbred performance. Regressions of actual crossbred calf performance on sire EBV for each of the traits differed little from their expectation of 0.5. Angus sires produced crossbred carcasses with the highest P8 and lowest RBY but highest IMF. In contrast, crossbred progeny from Belmont Red sires had the lightest 400W and CWT, lowest P8, and highest RBY. Estimates of rpc were 0.48, 0.48, 0.83, 0.95, 1.00, and 0.78 for 400W, CWT, RBY, IMF, P8, and SEMA, respectively. Commercial breeders selecting sires for crossbreeding programs with Brahman females, based on EBV computed from purebred data, might encounter some reranking of sire's performance for weight-related traits, with little expected change in carcass traits.     

Performance of using opposing homozygotes for paternity testing in Japanese Black cattle

Genome-wide single nucleotide polymorphism (SNP) markers in Japanese Black cattle enable genomic prediction and verifying parent–offspring relationships. We assessed the performance of opposing homozygotes (OH) for paternity testing in Japanese Black cattle, using SNP genotype information of 50 sires and 3,420 fattened animals, 1,945 of which were fathered by the 50 genotyped sires. The number of OH was counted for each sire–progeny pair in 28,764 SNPs with minor allele frequencies of ≥0.05 in this population. Across all pairs of animals, the number of OH tended to increase as the pedigree-based coefficient of relationship decreased. With a threshold of 288 (1% of SNPs) for paternity testing, most sire–progeny pairs were detected as true relationships. The frequency of Mendelian inconsistencies was 2.4%, reflecting the high accuracy of pedigree information in Japanese Black cattle population. The results indicate the utility of OH for paternity testing in Japanese Black cattle.     

Pedigree analysis of factor XI deficiency in Japanese black cattle

Using a DNA-based diagnostic test for factor XI deficiency in Japanese black cattle, we surveyed 123 cattle (42 sires and 81 dams) in Gifu and Hyogo prefectures, and calculated gene frequencies. In sires, we drew up the pedigree network of the cattle with the factor XI deficiency. Results showed that the mutated allele of factor XI deficiency was retroactive in at least 6 or more generations of sires. Frequencies of the mutant gene were higher at 26.4% in total, and at 33.3% in sires. All 7 cattle with the homozygote of mutated allele were clinically normal, and showed no bleeding episodes. The mutated allele of factor XI deficiency might be widespread among Japanese black cattle.     

Genetic and economic evaluation of Japanese Black (Wagyu) cattle breeding schemes

Deterministic simulation was used to evaluate 10 breeding schemes for genetic gain and profitability and in the context of maximizing returns from investment in Japanese Black cattle breeding. A breeding objective that integrated the cow-calf and feedlot segments was considered. Ten breeding schemes that differed in the records available for use as selection criteria were defined. The schemes ranged from one that used carcass traits currently available to Japanese Black cattle breeders (Scheme 1) to one that also included linear measurements and male and female reproduction traits (Scheme 10). The latter scheme represented the highest level of performance recording. In all breeding schemes, sires were chosen from the proportion selected during the first selection stage (performance testing), modeling a two-stage selection process. The effect on genetic gain and profitability of varying test capacity and number of progeny per sire and of ultrasound scanning of live animals was examined for all breeding schemes. Breeding schemes that selected young bulls during performance testing based on additional individual traits and information on carcass traits from their relatives generated additional genetic gain and profitability. Increasing test capacity resulted in an increase in genetic gain in all schemes. Profitability was optimal in Scheme 2 (a scheme similar to Scheme 1, but selection of young bulls also was based on information on carcass traits from their relatives) to 10 when 900 to 1,000 places were available for performance testing. Similarly, as the number of progeny used in the selection of sires increased, genetic gain first increased sharply and then gradually in all schemes. Profit was optimal across all breeding schemes when sires were selected based on information from 150 to 200 progeny. Additional genetic gain and profitability were generated in each breeding scheme with ultrasound scanning of live animals for carcass traits. Ultrasound scanning of live animals was more important than the addition of any other traits in the selection criteria. These results may be used to provide guidance to Japanese Black cattle breeders.     

Beef carcass composition of slaughter cattle differing in frame size, muscle score, and external fatness.

Commercial slaughter steers (n = 329) and heifers (n = 335) were selected to vary in slaughter frame size and muscle thickness score, as well as carcass adjusted 12th-rib fat thickness. After collection of USDA carcass grade data, one side of each carcass was fabricated into boneless primals, subprimals, and minor tissue components. Cuts were trimmed to 2.54, 1.27, and .64 cm of external fat, except for the knuckle, tri-tip, and tenderloin, which were trimmed of all fat. Forced four-variable regression equations were used to predict the percentage (chilled carcass weight basis) yield of boneless subprimals at the three fat trim levels as influenced by sex class, frame size, muscle score, and adjusted 12th-rib fat thickness. Independent variables that had the most influence on percentage yield of primals and boneless subprimals were adjusted 12th-rib fat thickness and sex class. Within the same phenotypic group, percentage of trimmable fat increased by 2.32% as 12th-rib fat thickness increased by .75 cm. Estimated percentage yield of the major subprimals from the loin and round tended to be higher or relatively equal for heifer carcasses at all trim levels compared with those subprimals from steer carcasses. Holding frame size, sex class, and fat thickness constant, there was a higher percentage yield of chuck roll, rib eye roll, and strip loin for carcasses from thick-muscled cattle than for those from average- and thin-muscled cattle. Frame size had little effect on percentage yield of boneless subprimals.     

Effect of preweaning nutritional management on yearling weight response in an open-herd selection program

Records on 276 progeny were collected in the final 2 yr (1984 and 1985) of an 8-yr Hereford cattle selection project. Selection was practiced using the top sires from the American Hereford Association's National Cattle Evaluation based on yearling weight expected progeny difference. An unselected control line was maintained to monitor environmental change. One-half of each line was creep-fed during the preweaning period for the last 2 yr to evaluate genotype x environment interactions. Direct response to yearling weight selection averaged 28 +/- 8 kg. Correlated response to selection amounted to .057 +/- .028 kg/d in preweaning ADG, 14 +/- 6 kg in weaning weight, .085 +/- .033 kg/d in postweaning ADG, 4.6 +/- 1.5 cm in yearling hip height and 11.2 +/- 3.0 cm2 in yearling pelvic area. Yearling fat thickness and scrotal circumference were not significantly affected by selection. Significant effects of creep feeding were observed for yearling weight (15 +/- 3 kg), preweaning ADG (.067 +/- .012 kg/d), weaning weight (13 +/- 2 kg), yearling hip height (1.2 +/- .5 cm) and yearling fat thickness (.07 +/- .03 cm). Postweaning ADG, yearling pelvic area and yearling scrotal circumference were not affected by creep feeding. No significant genetic group x creep feeding effects were found for any of the traits analyzed, indicating calves genetically superior for growth did not gain any additional advantage from creep feeding.     

Differences among Wagyu sires for USDA carcass traits and palatability attributes of cooked ribeye steaks

The objective of this experiment was to evaluate the effects of various Wagyu sires on carcass quality traits and palatability attributes of cooked ribeye steaks. Wagyu sires were used and grouped as Old (n = 6) or New (n = 2) sires, based on the chronological order in which they were imported into the United States. One hundred thirteen F1 heifer and steer calves sired by Wagyu bulls out of three different sources of cows were fed a backgrounding diet for 112 d consisting of an 80:20 ratio of roughage:concentrate then grazed on a mixture of orchardgrass and bluegrass pasture for 84 d and finished on a 10:90 ratio of roughage:concentrate diet for 231 d in a feedlot. Progeny from New sires had larger (P < .05) ribeye areas, higher (P < .05) marbling scores, and lower (P < .05) maturity scores than progeny from Old sires. Marbling was positively correlated (P < .05) to brightness (r = .56), texture (r = .60), and fat luster (r = .38). Progeny of New sires had lower shear force values (P < .05) than progeny of Old sires. These results indicate the superiority of New Wagyu sires to produce progeny with more marbling, lower shear force values, and larger ribeye areas than Old Wagyu sires. Furthermore, there are substantial differences between Wagyu sires for carcass quality traits and palatability attributes.     

Prediction of retail product and trimmable fat yields from the four primal cuts in beef cattle using ultrasound or carcass data

The most widely used system to predict percentage of retail product from the four primal cuts of beef is USDA yield grade. The purpose of this study was to determine whether routine ultrasound measurements and additional rump measurements could be used in place of the carcass measurements used in the USDA yield grade equation to more accurately predict the percentage of saleable product from the four primals. This study used market cattle (n = 466) consisting of Angus bulls, Angus steers, and crossbred steers. Live animal ultrasound measures collected within 7 d of slaughter were 1) scan weight (SCANWT); 2) 12th- to 13th-rib s.c. fat thickness (UFAT); 3) 12th- to 13th-rib LM area (ULMA); 4) s.c. fat thickness over the termination of the biceps femoris in the rump (URFAT; reference point); 5) depth of gluteus medius under the reference point (URDEPTH); and 6) area of gluteus medius anterior to the reference point (URAREA). Traditional carcass measures collected included 1) HCW; 2) 12th-to 13th-rib s.c. fat thickness (CFAT); 3) 12th- to 13th-rib LM area (CLMA); and 4) estimated percentage of kidney, pelvic, and heart fat (CKPH). Right sides of carcasses were fabricated into subprimal cuts, lean trim, fat, and bone. Weights of each component were recorded, and percentage of retail product from the four primals was expressed as a percentage of side weight. A stepwise regression was performed using data from cattle (n = 328) to develop models to predict percentage of retail product from the four primals based on carcass measures or ultrasound measures, and comparisons were made between the models. The most accurate carcass prediction equation included CFAT, CKPH, and CLMA (R2 = 0.308), whereas the most accurate live prediction equation included UFAT, ULMA, SCANWT, and URAREA (R2 = 0.454). When these equations were applied to a validation set of cattle (n = 138), the carcass equation showed R2 = 0.350, whereas the ultrasound data showed R2 = 0.460. Ultrasound measures in the live animal were potentially more accurate predictors of retail product than measures collected on the carcass.     

Evaluation of performance characteristics in a diallel among Simmental, Limousin, Polled Hereford and Brahman beef cattle. II. Carcass traits

Evaluations of steer and heifer progeny from a diallel mating design of Simmental, Limousin, Polled Hereford and Brahman beef cattle over 5 yr are presented. Traits evaluated included final weight, hot carcass weight, ribeye area, 12th rib fat thickness, marbling score, yield grade, dressing percentage and percentage of kidney, pelvic and heart fat. Progeny of Simmental sires were heavier at slaughter than those with Brahman sires (P less than .05), but no differences were found for carcass weight. Dressing percentage was higher for Limousin crosses compared with progeny of other sire breeds (P less than .05). Similar results were found for dam breeds, except that progeny of Limousin dams had heavier carcasses with a higher dressing percentage (P less than .05) than Brahman crosses. Crosses of Limousin and Simmental had larger ribeye areas (P less than .05) compared with calves of the other breeds. Progeny of Polled Hereford dams had higher marbling scores and were fatter than progeny of dams of other breeds (P less than .05). Heterosis estimates were significant for all Brahman crosses for final weight, carcass weight and ribeye area, but these contrasts were negligible for other traits. Estimates of general combining ability were positive and significant for Simmental for final weight, carcass weight, ribeye area and marbling score and were significant and negative for Limousin for final weight, fat thickness and yield grade. Maternal values were generally small.     

Genetic parameters for carcass traits of field progeny and their relationships with feed efficiency traits of their sire population for Japanese Black cattle

Genetic parameters for carcass traits of 1774 field progeny (1281 steers and 493 heifers), and their genetic relationships with feed efficiency traits of their sire population (740 bulls) were estimated with REML. Feed efficiency traits included feed conversion ratio (FCR) and residual feed intake (RFI). RFI was calculated by the residual of phenotypic (RFI_phe) and genetic (RFI_gen) regression from the multivariate analysis of feed intake on metabolic weight and daily gain. Progeny traits were carcass weight (CWT), rib eye area (REA), rib thickness (RBT), subcutaneous fat, yield estimate (YEM), marbling score (MSR), meat quality grade, meat color, fat color, meat firmness and meat texture. The estimated heritability for CWT (0.70) was high and heritabilities for all the other traits were moderate (ranged from 0.32 to 0.47), except for meat and fat color and meat texture which were low (ranged from 0.02 to 0.25). The high genetic correlation (0.62) between YEM and MSR suggests that simultaneous improvement of high carcass yield and beef marbling is possible. Estimated genetic correlations of RFI (RFI_phe and RFI_gen) of sires with CWT (− 0.60 and − 0.53) and MSR (− 0.62 and − 0.50) of their progeny were favorably negative indicating that the selection against RFI of sires may have contributed to produce heavier carcass and increase in beef marbling. The correlated responses in CWT, REA and RBT of progeny were higher to selection against RFI than those to selection against FCR of sires. This study provides evidence that selection against RFI is preferred over selection against FCR in sire population for getting better correlated responses in carcass traits of their progeny.     

Heterosis, maternal and direct effects in double-muscled and normal cattle: II. Carcass traits of young bulls

Data on 135 young bulls from a two-breed group diallel experiment involving double-muscled (DM) and normal (N) cattle were analyzed to obtain estimates of heterosis, maternal and direct effects for carcass traits. When carcass traits were adjusted to a constant age at slaughter (398.5 d), significant positive heterosis was observed for slaughter and carcass weights, carcass length and s.c. fat thickness. Maternal effect was relatively unimportant for the traits studied. The progeny of N sires and DM straightbreds were heavier at slaughter and had higher carcass weight, s.c. fat thickness and carcass length (P less than .01), whereas DM-sired progeny and DM straightbreds had higher dressing percentage (P less than .05) and cutability (P less than .01). Heterosis was significant for all the 10-11-12th rib joint dissection traits except for percentage of muscle. Although there was negative heterosis for percentage of bone, there was positive heterosis for rib joint weight, fat weight and percentage, muscle weight and muscle:fat and muscle:bone ratios. For direct effect and straightbred differences, N-sired progeny and N straightbreds, respectively, had significantly larger values for rib joint weight, fat weight and percentage and bone weight. The DM-sired progeny and DM straightbreds had larger values for percentage of muscle, muscle:fat and muscle:bone ratios. When the carcass and dissection traits were adjusted to a constant carcass (303.7 kg) and rib joint (4,812 g) weight, respectively, the results were similar to those observed on age constant basis except for rib eye area, for which DM-sired progeny and DM straightbreds had larger values.     

Heritability of racing performance in thoroughbred horses

The héritabilitý of performance in thoroughbreds was studied using the Timeform Ratings for horses which raced during 1970. Timeform Ratings are based on the relative performance of all horses racing in a given year. 794 Individual three year old records, representing 96 sires which had five or more progeny, were used.The mean ratings for sires, dams and progeny were 128.5, 93.6 and 81.4 respectively; among the progeny the ratings for colts, fillies and geldings were 88.3, 79.1 and 77.1 respectively. Calculations made suggest that while stallion selection is effective in selecting sires with high performance ratings it does not appear that the selection of dams is very closely related to performance. There was no evidence of assortative mating.Paternal half sib and regression of offspring on sire analyses of the data yielded heritability estimates of 0.35 ± 0.11 and 0.74 ± 0.20 respectively. Further regression analyses on a reduced set of data (553 progeny records) of offspring on sire, offspring on dam and offspring on mid parent value gave heritabilities 0.56 ± 0.20, 0.36 ± 0.10 and 0.34 ± 0.08respectively. The possible reason for the substantially higher heritability estimates from the regressions of offspring on sire are discussed. It is concluded that the best measure of heritability of performance is 35%.     

Multi-trait and random regression approaches for addressing the wide range of weaning ages in Asturiana de los Valles beef cattle for genetic parameter estimation

Weaning weight (WW) records of 24,066 Asturiana de los Valles beef cattle, including the progeny of 557 sires and 10,653 dams, were analyzed using a multitrait animal model (MAM) and a random regression model (RRM) in order to estimate the variance components and the breeding value of the animals. Three definitions of WW were used: early weaning (EW) for animals weaned before the age of 180 d; standard weaning (SW) for animals weaned between 180 and 240 d old; and late weaning (LW) for animals weaned between the ages of 240 and 365 d. The heritabilities (h(2)) were high (from 0.49 to 0.63), which fully agrees with previous estimates for this breed. The genetic correlations between EW and SW were 0.86, and lower between EW and LW at 0.543 to 0.622, using MAM and RRM models, respectively. Ranking of sires displayed changes depending on age at weaning of their offspring, which could explain the modest genetic progress reached using MAM evaluation. The first 2 eigenvalues of the random regression coefficient matrix explained 66 and 30% of the genetic variance, which implies important genetic variation underlying the form of the growth curve of the animals during the weaning period. The evaluation of sires according to the official method, as currently carried out by the breeders' association (WW adjusted previously to the age of 180 d), does not exploit the genetic differences in response to their production system where the calf is weaned at variable ages.     

Use of ultrasound to predict body composition changes in steers at 100 and 65 days before slaughter

Steers from research crossbreeding projects (n = 406) were serially scanned using real-time ultrasound at 35-d intervals from reimplant time until slaughter. Cattle were evaluated for rump fat depth, longissimus muscle area (ULMA), 12th-rib fat thickness (UFAT), and percentage of intramuscular fat (IMF) to determine the ability of ultrasound to predict carcass composition at extended periods before slaughter. Additional background information on the cattle, such as live weight, ADG, breed of sire, breed of dam, implant, and frame score was also used. Carcass data were collected by trained personnel at "chain speed," and samples of the 12th-rib LM were taken for ether extract analysis. Simple correlation coefficients showed positive relationships (P < 0.01) between ultrasound measures taken less than 7 d before slaughter and carcass measures: ULMA and carcass LM area (CLMA, r = 0.66); UFAT and carcass 12th-rib fat thickness (CFAT, r = 0.74); and IMF and carcass numeric marbling score (r = 0.61). The same correlation coefficients for ultrasound measures taken 96 to 105 d before slaughter and carcass values (P < 0.01) were 0.52, 0.58, and 0.63, respectively. Steers were divided into source-verified and nonsource-verified groups based on the level of background information for each individual. Regression equations were developed for the carcass measurements; 46% of the variation could be explained for CLMA and 44% of CFAT at reimplant time, 46% of the variation in quality grade and 42% of the variation in yield grade could be explained. Significant predictors of quality grade were IMF (P < 0.001), natural log of 12th-rib fat thickness (LUFAT, P < 0.001), and ADG (P < 0.01), whereas LUFAT (P < 0.001), ULMA (P < 0.01), live weight (P < 0.001), hip height (P < 0.001), and frame score (P < 0.001) were significant predictors of yield grade. Regressions using ultrasound data taken 61 to 69 d before slaughter showed increasing R2. Live ultrasound measures at reimplant time are a viable tool for making decisions regarding future carcass composition.