Acrylamide assisted photoinitiator-free photografting of acrylamido dyes onto wool

Upon UV irradiation wool fabrics can be photografted with photoactive acrylamido dyes at room temperature without photoinitiaors, which is eco-friendly coloration process compared with conventional adsorption-based dyeing. Acrylamide addition as a comonomer can improve the photografting probably by reducing the steric hindrance between the bulky dyes during the photocopolymerization. Even without photointiators and neutral salts, the optimal K/S values of the photografted wool reached upto 18.7 and 18.5 for Reactive Red 84 and Yellow 39 dyes respectively. The optimal UV-grafting coloration can be achieved when a UV energy of 25 J/cm² was irradiated on the padded fabrics with 6.3 %owf dye containing 0.65 mole ratio of acrylamide to the dyes. Furthermore, the color fastness of the grafted fabrics was as good as those of conventionally dyed fabrics due to the copolymerization of dyes and comonomers.     

UV-induced coloration of cotton fabrics by photografting of acrylamido dyes using acrylamide as a comonomer

Formulations of acrylamido dyes containing comonomers can be photografted onto cotton fabric upon UV irradiation at room temperature without neutral salts, which makes it a novel coloration process of excellent environmental friendliness. The photografting of the dyes can be assisted by the copolymerization of the acrylamide comonomer which may reduce the steric hindrance of the bulky dyes. About 90 % of the dyes and 94 % of the acrylamide are photopolymerized in the solution and the degree of polymerization is estimated to be 13.2 according to ¹H-NMR and MALDI-TOF mass analyses. The optimal K/S values of the grafted cotton fabrics showed 13.3 and 12.3 for red and yellow dyes, respectively. The optimal UV-grafting coloration can be achieved when a UV energy of 25 J/cm² was irradiated on the padded fabrics with a formulation of 0.65 mole ratio of acrylamide to the dyes, 7 wt% acetophenone photoinitiator (Irgacure 2959) based on the dye weight under pH 6. Furthermore, the color fastness properties of the grafted fabric were superior to those of conventional reactive dyeing of the dyes due to higher molecular weight of the polymerized dyes.     

<Emphasis Type="Italic">Limoniastrum monopetalum</Emphasis> stems as a new source of natural colorant for dyeing wool fabrics

In the present study, an attempt has been made to dye the wool fabric with Limoniastrum monopetalum stems, as a source of natural dye, which has not been exploited so far. Optimization of extraction parameters was done. Optimum results of extraction process were obtained with a dye concentration of 60 g/l, a temperature of 90 °C during 100 min. The study of different factors effecting dyeability of wool fabrics by aqueous L. monopetalum stems extract showed that the pH of dye bath and dyeing temperature and time affected considerably the color yield. The best results were obtained at the following conditions; pH 2, 100 °C, and 60 min. Metal mordants, when used in conjunction with L. monopetalum dye, allowed to obtain various shades. The determination of phenolic contents of aqueous L. monopetalum stems extract showed a high amount of phenolic components. Based on RP-HPLC, the coloring extract of L. monopetalum stems contains tannins and polyphenols. The major identified phenolic compounds were procatechuic, Trans-cinnamic and gallic acids. Hence, aqueous L. monopetalum stems extract could be successfully exploited for dyeing wool fabrics with high color yield (K/S).     

A study on combining natural dyes and environmentally-friendly mordant to improve color strength and ultraviolet protection of textiles

In this study, natural dyes were extracted from five plants, namely diospyros kaki, dioscorea cirrhosa, millettia (jixueteng), ecliptae, and macrocarpa nucuma, using environmentally-friendly solvents, including ethanol and deionized (DI) water. A plant mordant, tannin extracted from Emblica officinalis G., and a metal mordant, copper sulfate, were used in the pre-dyeing process. Cotton and silk fabric samples were treated using the five natural dyes without and with mordanting for comparison on their color strength and characteristics as well as protection against ultraviolet radiation (UVR). Results revealed that Emblica officinalis G. had the highest total phenol content, followed by dioscorea cirrhosa. The presence of abundant phenolic groups in the natural dyes and mordant makes them effective coloration agents for fabrics. Cotton and silk fabrics dyed using ecliptae without pre-mordanting had the highest K/S values. Silk fabrics had higher K/S values than cotton fabrics, indicating greater color strength in pre-mordanted silk treated with DI water-extracted dyes. Natural mordant used before treatment with natural dyes contribute to significant enhancement in color strength, and Emblica officinalis G. alone could darken the color of cotton and silk fabrics dyed with plant pigment. Moreover, treatment with natural dyes after mordanting can increase ultraviolet protection factor (UPF) and the enhancement in UVR protection is greater and more significant in cotton fabrics than in silk fabrics, and in fabrics treated with DI water-extracted natural dyes than in those treated with ethanol-extracted ones. In conclusion, pre-dyeing with natural mordant followed by treatment with natural dyes extracted using environmentally-friendly solvents can enhance significantly K/S and UPF, offering directions for manufacturing textiles without environmental hazards but with good appearance and health benefits.     

Synthesis and spectral characterization of novel azomethine disperse dyes derived from pyrazolone moiety and their dyeing performance on polyester fabrics

A series of new azomethine dyes based on pyrazolone system have been synthesized via different routes. The solvatochromism for the dyes was evaluated with respect to spectroscopic properties in various solvents. The dyes were applied as disperse dyes on polyester fabrics and gave shade poor to excellent light fastness, washing, perspiration, sublimation, and rubbing fastness properties. Also the position of color in CIELAB coordinates (L*, a*, b*) and K/S value were investigated.     

Functionalization of the aquatic weed water hyacinth <Emphasis Type="Italic">Eichhornia crassipes</Emphasis> by using zinc oxide nanoparticles for removal of organic dyes effluent

In this study, purified Eichhornia crassipes dead biomass, coated biomass with ZnO nanoparticles (NPs) and one coated with both ZnO NPs and polyethylenimine (PEI) were successfully fabricated as a bioadsorbent and biodegradent of organic dyes from the textile dye effluent. These ZnO NPs are capable of enhancing the dispersability and adsorption capacity of PEI and the anionic dyes. The surface analyses of Eichhornia crassipes, Eichhornia crassipes/ZnO NPs and Eichhornia crassipes/ZnO NPs/ PEI were characterized by SEM, specific surface area and micropore volume. The effect of three parameters including Eichhornia crassipes concentration, dye concentration and contact time on the color removal percent and degradation percent were evaluated. The results showed that the bleached Eichhornia crassipes was an efficient adsorbent for cationic dyes. Also, the effectiveness of Eichhornia crassipes/ZnO NPs was employed as photocatalytic agent for the degradation of C.I. Direct Red 23 in the presence and absence of UV irradiation. Moreover, Eichhornia crassipes/ZnO NPs/PEI shows a high adsorption capacity toward the anionic dyes C.I. Acid Red 40 and C.I. Reactive Orange 91. It was found that, Eichhornia crassipes/ZnO NPs was completely degraded C.I. Direct Red 23 by >90 % within 90 min of UV irradiation time, whereas in the absence of UV irradiation it required a substantially longer time (120 min) to achieve a similar degradation percent. In addition, Eichhornia crassipes/ZnO NPs/PEI was most effective and show the maximum adsorption capacity for C.I. Reactive Orange 91 and C.I. Acid Red 40 and its efficiency for the color removal percent was 100 % for C.I. Reactive Orange 91 and 95 % for C.I. Acid Red 40 in less than 60 min processing time.     

Application of MCT-βCD to Modify Cellulose/Wool Blended Fabrics for Upgrading Their Reactive Printability and Antibacterial Functionality

Pre-loading of monochlorotriazinyl β-Cyclodextrin (MCT-βCD) onto/within viscose/wool (V/W) and cotton/wool (C/W) blended fabrics provide hosting cavities that can form host-guest inclusion complexes with reactive dyes in postprinting as well as with triclosan derivative or silver nanoparticles/hyperbranched polyamide-amine (AgNPs/HBPAA) composite in subsequent final antibacterial finishing step. Coloration properties, antibacterial activity against (S. aureus) and (E. coli) pathogenic bacteria, durability of the obtained products, according to the above mentioned route, to wash, surface morphology and composition of selected samples were investigated. Results obtained signify that premodification of the nominated substrates with MCT-βCD (10 g/l), followed by reactive printing with mono-or bifunctional reactive dye (20 g/l), and subsequent post-finishing with triclosan derivative or AgNPs/HBPAA composite (15 g/l each) is an efficient treatments sequence for attaining reactive prints with significant antibacterial efficacy and noticeable durability to wash. Surface depositions of selected active ingredients were also confirmed using SEM and EDX analysis.     

Dyeability and Antibacterial Finishing of Hemp Fabric Using Natural Bioactive Neem Extract

Two functional compounds were successfully extracted from neem (Azadiracta indica): a tannin-rich natural dye and an antibacterial agent. The dye was extracted from the bark using water, and the antibacterial from the leaf using methanol. These were used to dye hemp fabrics. Higher color strength values (K/S) were found when dyeing was conducted at a higher dye concentration, elevated temperature, and longer dyeing time. Optimal results were achieved when using 5 %w/v of extracted powder at 100 °C for 60 min. The resulting fabrics appeared reddish-brown, and were rated as good to excellent for color fastness against washing, water, sea water, and perspiration. The antibacterial agent from the neem leaf was extracted by Soxhlet apparatus at 65 °C with methanol as solvent. The dyed and antibacterial-finished hemp fabrics were tested against Staphylococcus aureus, following the percentage reduction test of AATCC 100. The treated fabrics demonstrated a 99.99 % reduction in Staphylococcus aureus.     

Meta-mordant Dyeing with <Emphasis Type="Italic">Camellia sinensis</Emphasis> (L.) O. Ktze var. <Emphasis Type="Italic">waldensae</Emphasis> (S.Y.Hu) Chang (Yellow-bud Tea) Extract for Wool Fabrics Treated by UV Radiation

The wool fabrics were treated by ultraviolet (UV) radiation and then dyed with Camellia sinensis (L.) O. Ktze var. waldensae (S.Y.Hu) Chang (yellow-bud tea) extract using meta-mordant dyeing method. The results indicated that the hydrophilicity of wool fabrics was improved after UV radiation treatment, which was conducive in improving color performance for the meta-mordant dyeing with yellow-bud tea extract of wool fabrics. The optimal dyeing process was that the powdered extract (5.0 % o.w.f) and the CuSO₄ (2.0 % o.w.f) were added to the dyeing liquor, the pH value was adjusted to 3.5-4.0 by HCOOH, the wool fabrics treated by UV radiation for 10 min and then were dyed at a bath ratio of 1:50 under 95 °C for 70 min. By means of three-factor quadratic current rotation revolving design (TQCRRD) method, the computation results of the mathematical equations and models indicated that UV radiation was the most important factor for meta-CuSO₄ dyeing with yellow-bud tea extract for wool fabrics.     

Extraction,Dyeing, and Antibacterial Properties of <Emphasis Type="Italic">Crataegus Elbursensis</Emphasis> Fruit Natural Dye on Wool Yarn

Fruits obtained from shrubs of the Crataegus elbursensis (C. elbursensis) plant demonstrate significant antioxidant and antibacterial properties. In this study, natural dye was sono-extracted from fresh and dried fruits and applied in dyeing and antibacterial finishing of wool. The maximum sono-extraction yield was obtained when optimal conditions of ethanol/ water (4/1 v/v) as extracting solvent, time 30 min, pH 4, temperature 50 oC, and C. elbursensis concentration 10 g/l were used. When wool yarns were dyed with the extracted natural dye, the maximum dye uptake was achieved using dye concentration 75 % owf, and dyeing condition of 100 oC, 60 min, pH 4, and LR 100:1. Different metal salts like aluminum sulfate, copper sulfate, and tin chloride were applied on wool by pre-mordanting method and their effects on dye uptake, color variation, and color fastness were examined. Results showed that the natural dye itself had relatively high uptake and good color fastness on un-mordanted wool. Further, each mordant had different effect on dye uptake, color variation, and color fastness properties depending on its coordination ability with dye molecules and wool chains. Moreover, dyed yarns showed good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria.     

Multifunctionalised silk using <Emphasis Type="Italic">Delonix regia</Emphasis> stem shell waste

The use of natural dyes and natural finishes on textiles has become a matter of significant importance because of the increased environmental awareness to avoid some hazardous synthetic dyes and synthetic chemicals. The Delonix regia stem shells were extracted in distilled water methanol and ethanol solvents. Phytochemical analysis was carried out for the presence of bioactive chemical constituents such as saponin, terpenoid, flavonoid, glycoside, phenol and tannin using the standard procedure. All the tests showed positive for the presence of components except saponin in methanol and ethanol extract. The qualitative antibacterial analysis was done by AATCC 147 method with excerpts from three different solvents both against S. aureus (gram-positive) and E. coli (gram-negative) bacteria. Delonix regia stem shell extract (DSE) in distil water was used for natural dyeing of mulberry silk fabric. Pre-mordanting and post-mordanting of silk fabric were carried out using alum and myrobalan mordants. Treated fabrics showed a substantial increase in colour depth (K/S) and adequate wash, light and rubbing fastness properties without and with mordanted and dyed silk fabrics. Quantitative antibacterial analysis by AATCC 100 method was done on dyed silk fabric which showed very good resistance both against bacteria S. aureus and E. coli bacteria. Dyed silk fabric also showed good to very good ultraviolet (UV) protection property. The physicochemical composition of the untreated and without mordant treated silk fabrics were analysed by attenuated total reflection (ATR) Fourier transforms infrared (FTIR) spectroscopy, scanning electron microscope (SEM), energy dispersive spectrometry (EDS) and atomic absorption spectrophotometer (AAS). In addition to that wash, durability was also measured of dyed silk fabric for antibacterial and ultraviolet protection (UPF) properties according to AATCC 61 2A washing method.     

Eco friendly natural dyes from <Emphasis Type="Italic">Syzygium cumini (L)</Emphasis> (Jambolan) fruit seed endosperm and to preparation of antimicrobial fabric and their washing properties

The present study has been focused on the extraction of natural dyes from Syzygium cumini (L.) Jambolan fruit dry seed endosperm and investigation of their phytochemicals and pharmacological characteristics. Dyes were prepared using aqueous, acidic, alcoholic and alkaline extraction techniques. UV spectral studies of the dyes showed a variation in absorption maxima and their color varied with respect to the pH and the solvent used during extraction. The dye was prepared from Jambolan fruit dry seed endosperm showed good antibacterial activity. The aqueous extraction of Jambolan fruit dry seed endosperm was able to inhibit the growth of many bacterial strains viz S. lutea, E.coli, P. aeruginosa, Pseudomonas fluorescens and S. aureus etc. The antimicrobial property of the dyes was used in developing antimicrobial fabric.     

Experimental Study on Antimicrobial Activity of Silk Fabric Treated with Natural Dye Extract from Neem (<Emphasis Type="Italic">Azadirachta indica</Emphasis>) Leaves

In the present study, a novel eco-friendly production of silk fabrics dyed with different natural dye bath concentrations (40, 80, 120, 160, 200 and 240 g/l) extracted from neem (Azadirachta indica) leaves was developed. The surface morphology of the fabrics was examined by scanning electron microscopy (SEM) and Fourier-transform infrared (FTIR) spectroscopy to characterize the chemical structure of the fabrics. The SEM images of the undyed fabric show that the fabric was tightly woven with little porosity between the fibres with dozens of silk threads in orthogonal directions. By increasing the neem concentration, a scale of fine particles grew on the surface of the silk fabrics with little macroscopical defects was demonstrated. The fiber diameters and tightness between filaments were significantly increased. The FTIR displayed that, neem dye does not change the characteristic peaks of the silk fabrics. Also, the evaluation of the antimicrobial activity of the undyed and neem dyed silk fabrics was monitored for Gram positive and Gram negative bacteria in addition to yeasts and fungi by using the agar diffusion method. The comparison between the different dye bath concentrations was based on the inhibition zones obtained after incubation. The antimicrobial activity in leaf extract of neem was estimated in Staphylococcus aureus, Bacillus subtilis and Lactobacillus cereus (Gram positive bacteria); Escherichia coli (Gram negative bacteria); Candida albicans and Candida tropicalis (yeasts); and Aspergillus niger and Fusarium solani (fungi). The results emphasized that, the highest neem dye bath concentration (240 g/l) was found to display good inhibitory effect against the Gram positive and reasonable activity against the Gram negative bacteria. Furthermore, the different dye bath concentrations possess no activities against yeast and fungi. In conclusion, the data reveal that the increase of neem dye concentration does not damage the silk fabric; however, it improves its antimicrobial activity by incorporating with antimicrobial agent. The current study highlighted that using neem leaves had beneficial effect in controlling the pathogenic microbial organisms.     

Application of <Emphasis Type="Italic">Sterculia Foetida</Emphasis> Fruit Shell Waste Biomolecules on Silk for Aesthetic and Wellness Properties

There has been growing interest in the use of bioresource waste for natural dyeing and finishing. This paper discusses dye extraction from the novel source fruit shell waste of Sterculia foetida and its application on mulberry silk fabric to confer aesthetic coloration and wellness properties such as ultra-violet (UV) protection and antibacterial properties. Treated fabrics showed a substantial increase in color depth and adequate wash, light, and rubbing fastness properties for dyed silk fabrics with and without mordanting. Pre-and post-mordanting of silk fabrics were carried out using mordants such as alum, harda (myrobalan), and copper sulfate. UV-visible spectrophotometric analysis of fruit shell extract (FSE) at different pHs and FSE with three different mordants at neutral pH was used to understand the phenomena of dye-fiber interaction. The treated fabrics characterised by ATR-FTIR, SEM-EDS, and XRD analysis indicate the nature of dye fiber interaction justifying the multifunctional properties. The treated fabric also showed very good ultraviolet protection property and antibacterial properties both against S. aureus and E. coli bacteria even after ten washes. The results indicate that Sterculia foetida fruit shell extract offers an excellent potential as coloration, antibacterial, and ultraviolet protective agent for mulberry silk fabric.     

Dyeing and antibacterial properties of <Emphasis Type="Italic">Liriope platyphylla</Emphasis> fruit extracts on silk fabrics

Dyeing and antibacterial properties of a natural dye extracted from Liriope platyphylla fruit applied on silk fabrics have been studied. The total phenolic content (1109.13±69.02 mg), total flavonoid content (530.60±89.44 mg), and total anthocyanin content (492.26±77.79 mg) were measured in 100 g fresh weight of L. platyphylla fruits. In addition, ten anthocyanins and four flavanols were identified in L. platyphylla fruits by high performance liquid chromatography with diode array detection coupled with electrospray ionization mass spectrometry (HPLC-DAD/ESI-MS). A broad variation in color shade and color depth can be achieved with mixtures of dye extracts and metal mordants. Purple, blue, and pale green were main color shades of silk fabrics dyed with the extracts. The fastness of dyed silk fabrics except for control dyed fabrics against light, washing, and rubbing were acceptable with at least a grey scale rating of 3. The antibacterial activities of L. platyphylla fruit extracts were retained on dyed silk fabrics even after home washing 30 cycles. Mordanting with metal salt mordant had a positive effect on antibacterial activity of dyed silk fabrics in this study. Among them, aluminum and copper were the most effective mordants for improving antibacterial activity of silk fabrics dyed with L. platyphylla fruit extracts. The costs of natural dyeing of per silk fabrics kg by the extracts from L. platyphylla fruit were also calculated on laboratory scale.     

Characterization of the surface properties of cellulosic fibers in fibrous and ground forms by IGC and contact angle measurements

Surface properties of fibrous and ground cotton and linen were investigated by inverse gas chromatography (IGC) and the contact angle with different liquids was also measured on fabrics composed of both fibers. Results proved that dispersion component of surface tension (γ _s ^d ) determined by IGC depends not only on the surface energy, but also on several factors influencing the adsorbability of probe molecules on the cellulosic substrates. For cotton samples, the trapping of n-alkanes among waxy molecules in the outer layer of fibers can be presumed. This effect results in larger γ _s ^d for cotton fibers than for linen in spite of the higher wettability of the linen fabrics. Besides the surface energy and trapping effects, the grinding also influences the γ _s ^d values. Specific enthalpy of adsorption (ΔH _A ^ab ) of polar probes could be determined on all linen samples, but only on the ground cotton sample. Lewis acid-base character calculated for linen and ground cotton samples depends on the same effects as the γ _s ^d does. The similar ΔH _A ^ab values of chloroform (acidic) and THF (basic) measured on each of the samples support the conclusion that the surface character is amphoteric, which is also proved by the high ΔH _A ^ab values of the amphoteric ethyl acetate and acetone probes.     

UV-grafting coloration of cotton and wool fabrics using bismethacrylated quinizarin dye

A novel bifunctional quinizarin dye possessing two photoactive methacrylate groups was synthesized by the reaction of quinizarin with methacryloyl chloride. The synthesized dye, a low substantive dye under the conventional dyeing process, can be photografted onto cotton and wool fabrics at room temperature without neutral salts, which makes it a novel coloration process of excellent environmental friendliness. The concurrent polymerization and grafting of the synthesized dye onto cotton or wool can be assisted by a photoinitiator and acrylic acid in the case of cotton grafting. Moreover, color yields of the grafted fabrics improved significantly with the photografting of the bifunctional dye. The bifunctional dye can be photopolymerized with the increase in UV energy to 25 J/cm² and the oligomeric dye has a degree of polymerization of 5 or more. Furthermore, the color fastness properties of the grafted fabrics were superior to those of the dyed fabrics via exhaustion.     

Bioactive and multifunctional textile using plant-based madder dye: Characterization of UV protection ability and antibacterial activity

In the present work the natural madder dye (Rubia tinctorum L.) was applied to the simultaneous dyeing and functionalization of polyester (PET) fabric. In the first part of the study the color performance and the durability were revealed for exhaustion dyed fabric. The dyed fabric was then characterized with respect to ultraviolet (UV) protection ability and antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). CIELab color coordinates, namely the positive a* and b* values, confirmed a yellow/orange color of the dyed fabric. From durability tests, the color showed a moderate to good light fastness and good to excellent fastness to washing and rubbing. The madder dye improved both the UV protective performance and the antibacterial activity of the fabric. With 3 % on weight of fiber (owf) the UV protection factor increased up to 106, and the antibacterial activity up to 86 % against both types of bacteria tested.     

Natural dyeing of cotton with <Emphasis Type="Italic">Xylocarpus granatum</Emphasis> bark extract: Dyeing,fastness, and ultraviolet protection properties

In this research we investigated the dyeing of cotton fabrics with extracts of Xylocarpus granatum, a mangrove plant with a long history of use in leather tanning and textile dyeing. X. granatum bark was extracted and spray-dried, yielding a tannin-rich, reddish-brown powder. This powder proved a suitable colorant for the natural dyeing of cotton with promising color fastness properties to wet treatments (washing, water, sea water, and perspiration), hot pressing, crocking, and light exposure. However, the dye alone produced only weak levels of coloration and therefore metallic salt mordants were employed to improve the color strength, through the formation of insoluble tannate complexes. The resulting fabric K/S values were dependent on the mordant used and exhibited the following trend: ferric sulfate > sodium dichromate > copper sulfate > potassium aluminum sulfate > no mordant, for fabrics exposed to mordants before and after dyeing. Mordanting resulted in slight variations in shade and color fastness. In most cases, the color fastness properties were preserved, except for color fastness to light and hot pressing, for which lowered ratings were found for some mordants. Stiffness and mechanical performance were not greatly affected by dyeing or mordanting, except for sodium dichromate mordanting which significantly stiffened and weakened the fabric. The ultraviolet protection factor (UPF) of all the dyed samples achieved the maximum (50+) level, highlighting the excellent UV shielding properties of the fabric. Overall, X. granatum bark extract is a promising, effective colorant for the natural dyeing of cotton in terms of appearance, fastness, and physical characteristics.