共查询到20条相似文献,搜索用时 453 毫秒
1.
Scanning tunneling microscopy (STM) studies have demonstrated that monolayer-deep, flat-bottomed, circular etch pits can be grown on highly ordered pyrolytic graphite by high-temperature etching in the presence of oxygen. In this work, these graphite etch pits are used as "molecule corrals" to isolate ensembles of molecules for study by STM. The nucleation of self-assembled molecular films in the corrals took place by nucleation events separate from those leading to self-assembly on the surrounding terrace and allowed the measurement of the nucleation rate constant in the corrals. The dependence of the nucleation rate for self-assembly on pit size shows that nucleation occurs at open terrace sites and that step edges (that is, the corral's perimeter) and confinement inhibit film growth. 相似文献
2.
We have identified cobalt-base superalloys showing a high-temperature strength greater than those of conventional nickel-base superalloys. The cobalt-base alloys are strengthened by a ternary compound with the L1(2) structure, gamma' Co3(Al,W), which precipitates in the disordered gamma face-centered cubic cobalt matrix with high coherency and with high melting points. We also identified a ternary compound, gamma' Ir3(Al,W), with the L1(2) structure, which suggests that the Co-Ir-Al-W-base systems with gamma+gamma' (Co,Ir)3(Al,W) structures offer great promise as candidates for next-generation high-temperature materials. 相似文献
3.
Stierle A Renner F Streitel R Dosch H Drube W Cowie BC 《Science (New York, N.Y.)》2004,303(5664):1652-1656
Ultrathin Al2O3 layers on alloys are used as templates for model catalysts, tunneling barriers in electronic devices, or corrosion-resistant layers. The complex atomic structure of well-ordered alumina overlayers on NiAl110 was solved by surface x-ray diffraction. The oxide layer is composed of a double layer of strongly distorted hexagonal oxygen ions that hosts aluminum ions on both octahedral and tetrahedral sites with equal probability. The alumina overlayer exhibits a domain structure that can be related to characteristic growth defects and is generated during the growth of a hexagonally ordered overlayer (Al2O3) on a body-centered cubic (110) substrate (NiAl). 相似文献
4.
Poudel B Hao Q Ma Y Lan Y Minnich A Yu B Yan X Wang D Muto A Vashaee D Chen X Liu J Dresselhaus MS Chen G Ren Z 《Science (New York, N.Y.)》2008,320(5876):634-638
The dimensionless thermoelectric figure of merit (ZT) in bismuth antimony telluride (BiSbTe) bulk alloys has remained around 1 for more than 50 years. We show that a peak ZT of 1.4 at 100 degrees C can be achieved in a p-type nanocrystalline BiSbTe bulk alloy. These nanocrystalline bulk materials were made by hot pressing nanopowders that were ball-milled from crystalline ingots under inert conditions. Electrical transport measurements, coupled with microstructure studies and modeling, show that the ZT improvement is the result of low thermal conductivity caused by the increased phonon scattering by grain boundaries and defects. More importantly, ZT is about 1.2 at room temperature and 0.8 at 250 degrees C, which makes these materials useful for cooling and power generation. Cooling devices that use these materials have produced high-temperature differences of 86 degrees , 106 degrees , and 119 degrees C with hot-side temperatures set at 50 degrees, 100 degrees, and 150 degrees C, respectively. This discovery sets the stage for use of a new nanocomposite approach in developing high-performance low-cost bulk thermoelectric materials. 相似文献
5.
Real-time synchrotron diffraction has been used to monitor the phase transformations of highly exothermic, fast self-propagating solid combustion reactions on a subsecond time scale down to 100 milliseconds and in some instances to 10 milliseconds. Three systems were investigated: Ti + C --> TiC; Ti + C + xNi --> TiC + Ni-Ti alloy; and Al + Ni --> AlNi. In all three reactions, the first step was the melting of the metal reactants. Formation of TiC in the first two reactions was completed within 400 milliseconds of the melting of the Ti metal, indicating that the formation of TiC took place during the passage of the combustion wave front. In the Al + Ni reaction, however, passage of the wave front was followed by the appearance and disappearance of at least one intermediate in the afterburn region. The final AlNi was formed some 5 seconds later and exhibited a delayed appearance of the (210) reflection, which tends to support a phase transformation from a disordered AlNi phase at high temperature to an ordered CsCl structure some 20 seconds later. This new experimental approach can be used to study the chemical dynamics of high-temperature solid-state phenomena and to provide the needed database to test various models for solid combustion. 相似文献
6.
Cliftonite, a polycrystalline aggregate of graphite with cubic morphology, is known in ten meteorites. Some workers have considered it to be a pseudomorph after diamond, and have used the proposed diamond ancestry as evidence of a meteoritic parent body of at least lunar dimensions.We have synthesized cliftonite in Fe-Ni-C alloys in vacuumn, as a product of decomposition of cohenite [(Fe, Ni)(3)C]. We therefore suggest that a high pressure origin is unnecessary for meteorites which contain cliftonite, and that these meteorites were formed at low pressures. This concluision is in agreement with other recent evidence. 相似文献
7.
Weir JR 《Science (New York, N.Y.)》1967,156(3783):1689-1695
The successful development of nuclear power reactors that are economically competitive with other sources of energy has led us to believe that more economical reactors will be developed. But, in developing the next generation of reactors, a new set of problems must be overcome. One of the most important of these is that of the embrittlement of the structural materials at high temperatures as a result of the intense neutron fields in these advanced systems. The radiation-induced embrittlement at high temperatures is probably associated with helium produced in the materials due to (n,alpha) reactions with the metal, and in some alloys radiation-induced precipitation of compounds within the alloy may also play a role. We believe that the most serious longterm problem is the generation of helium. Our current understanding of the mechanism by which this radiation damage is produced has allowed us to effect some improvement in the behavior of conventionally produced structural alloys, through minor modifications of the normal working and annealing processes used in their manufacture. However, we may find that new alloys will have to be developed to withstand the service conditions in future nuclear power reactors. 相似文献
8.
Nanostructured metals are generally unstable; their grains grow rapidly even at low temperatures, rendering them difficult to process and often unsuitable for usage. Alloying has been found to improve stability, but only in a few empirically discovered systems. We have developed a theoretical framework with which stable nanostructured alloys can be designed. A nanostructure stability map based on a thermodynamic model is applied to design stable nanostructured tungsten alloys. We identify a candidate alloy, W-Ti, and demonstrate substantially enhanced stability for the high-temperature, long-duration conditions amenable to powder-route production of bulk nanostructured tungsten. This nanostructured alloy adopts a heterogeneous chemical distribution that is anticipated by the present theoretical framework but unexpected on the basis of conventional bulk thermodynamics. 相似文献
9.
Although strong and stiff human-made composites have long been developed, the microstructure of today's most advanced composites has yet to achieve the order and sophisticated hierarchy of hybrid materials built up by living organisms in nature. Clay-based nanocomposites with layered structure can reach notable stiffness and strength, but these properties are usually not accompanied by the ductility and flaw tolerance found in the structures generated by natural hybrid materials. By using principles found in natural composites, we showed that layered hybrid films combining high tensile strength and ductile behavior can be obtained through the bottom-up colloidal assembly of strong submicrometer-thick ceramic platelets within a ductile polymer matrix. 相似文献
10.
A central question in the study of amorphous materials is the extent to which they are ordered. When the crystalline intermetallic R-Al(5)Li(3)Cu is compressed to 23.2 gigapascals at ambient temperature, an amorphous phase is produced whose order can be described as defects in a curved-space crystal. This result supports a structural relation between quasi-crystals and amorphous metals based on icosahedral ordering. This result also shows that a metallic crystal can be made amorphous by compression. 相似文献
11.
Lake B Aeppli G Clausen KN McMorrow DF Lefmann K Hussey NE Mangkorntong N Nohara M Takagi H Mason TE Schröder A 《Science (New York, N.Y.)》2001,291(5509):1759-1762
Neutron scattering is used to characterize the magnetism of the vortices for the optimally doped high-temperature superconductor La(2-x)Sr(x)CuO4 (x = 0.163) in an applied magnetic field. As temperature is reduced, low-frequency spin fluctuations first disappear with the loss of vortex mobility, but then reappear. We find that the vortex state can be regarded as an inhomogeneous mixture of a superconducting spin fluid and a material containing a nearly ordered antiferromagnet. These experiments show that as for many other properties of cuprate superconductors, the important underlying microscopic forces are magnetic. 相似文献
12.
The selection of a structural material requires a compromise between strength and ductility. The material properties will then be set by the choice of alloy composition and microstructure during synthesis and processing, although the requirements may change during service life. Materials design strategies that allow for a recoverable tuning of the mechanical properties would thus be desirable, either in response to external control signals or in the form of a spontaneous adaptation, for instance in self-healing. We have designed a material that has a hybrid nanostructure consisting of a strong metal backbone that is interpenetrated by an electrolyte as the second component. By polarizing the internal interface via an applied electric potential, we accomplish fast and repeatable tuning of yield strength, flow stress, and ductility. The concept allows the user to select, for instance, a soft and ductile state for processing and a high-strength state for service as a structural material. 相似文献
13.
Microstructured particles were synthesized by growing colloidal crystals in aqueous droplets suspended on fluorinated oil. The droplets template highly ordered and smooth particle assemblies, which diffract light and have remarkable structural stability. The method allows control of particle size and shape from spheres through ellipsoids to toroids by varying the droplet composition. Cocrystallization in colloidal mixtures yields anisotropic particles of organic and inorganic materials that can, for example, be oriented and turned over by magnetic fields. The results open the way to controllable formation of a wide variety of microstructures. 相似文献
14.
The use of high-temperature nuclear magnetic resonance (NMR) spectroscopy provides a means of investigating the structure of refractory aluminate liquids at temperatures up to 2500 K. Time-averaged structural information indicates that the average aluminum coordination for magnesium aluminate (MgAl(2)O(4)) liquid is slightly greater than for calcium aluminate (CaAl(2)O(4)) liquid and that in both liquids it is close to four. Ion dynamics simulations for these liquids suggest the presence of four-, five-, and six-coordinated aluminate species, in agreement with NMR experiments on fast-quenched glasses. These species undergo rapid chemical exchange in the high-temperature liquids, which is evidenced by a single Lorentzian NMR line. 相似文献
15.
Laughlin RB 《Science (New York, N.Y.)》1988,242(4878):525-533
The case is made that the spin-liquid state of a Mott insulator, hypothesized to exist by Anderson and identified by him as the correct context for discussing high-temperature superconductors, occurs in these materials and exhibits the principles of fractional quantization identified in the fractional quantum Hall effect. The most important of these is that particles carrying a fraction of an elementary quantum number, in this case spin, attract one another by a powerful gauge force, which can lead to a new kind of superconductivity. The temperature scale for the superconductivity is set by an energy gap in the spin-wave spectrum, which is also the fundamental measure of how "liquid" the spins are. 相似文献
16.
Jakobsen B Poulsen HF Lienert U Almer J Shastri SD Sørensen HO Gundlach C Pantleon W 《Science (New York, N.Y.)》2006,312(5775):889-892
During plastic deformation of metals and alloys, dislocations arrange in ordered patterns. How and when these self-organization processes take place have remained elusive, because in situ observations have not been feasible. We present an x-ray diffraction method that provided data on the dynamics of individual, deeply embedded dislocation structures. During tensile deformation of pure copper, dislocation-free regions were identified. They showed an unexpected intermittent dynamics, for example, appearing and disappearing with proceeding deformation and even displaying transient splitting behavior. Insight into these processes is relevant for an understanding of the strength and work-hardening of deformed materials. 相似文献
17.
Schlittler RR Seo JW Gimzewski JK Durkan C Saifullah MS Welland ME 《Science (New York, N.Y.)》2001,292(5519):1136-1139
We report the self-assembly of single crystals of single-walled carbon nanotubes (SWCNTs) using thermolysis of nano-patterned precursors. The synthesis of these perfectly ordered, single crystals of SWCNTs results in extended structures with dimension on the micrometer scale. Each crystal is composed of an ordered array of tubes with identical diameters and chirality, although these properties vary between crystals. The results show that SWCNTs can be produced as a perfect bulk material on the micrometer scale and point toward the synthesis of bulk macroscopic crystalline material. 相似文献
18.
We observe that a nanostructured metal can be hardened by annealing and softened when subsequently deformed, which is in contrast to the typical behavior of a metal. Microstructural investigation points to an effect of the structural scale on fundamental mechanisms of dislocation-dislocation and dislocation-interface reactions, such that heat treatment reduces the generation and interaction of dislocations, leading to an increase in strength and a reduction in ductility. A subsequent deformation step may restore the dislocation structure and facilitate the yielding process when the metal is stressed. As a consequence, the strength decreases and the ductility increases. These observations suggest that for materials such as the nanostructured aluminum studied here, deformation should be used as an optimizing procedure instead of annealing. 相似文献
19.
图书馆信息系统有序程度如何?对此许多管理者都是依靠主观判断,而不是客观的分析。如何通过变化系统结构使信息系统有序,为此文章运用信息计量的理论,分析信息论基础与图书馆信息系统的关系,重点论述申农信息熵模型,联系耗散结构理论阐述信息论对图书馆信息系统的指导意义。 相似文献
20.
Putnis A 《Science (New York, N.Y.)》1976,193(4251):417-418
Structural phase transformations in Ni(7)S(6) and Cu(7)S(4) have been observed dynamically by in situ experiments in a transmission electron microscope. In this way it is possible to demonstrate the possibility of two fundamentally different types of behavior: (i) the ideal transformation from the stable high-temperature form to the stable low-temperature form and vice versa and (ii) alternative metastable processes which operate when the formation of the low-temperature state is impeded. 相似文献