Forest management and carbon sequestration in wood products

Wood products are considered to contribute to the mitigation of carbon dioxide emissions. A critical gap in the life cycle of wood products is to transfer the raw timber from the forest to the processing wood industry and, thus, the primary wood products. Therefore, often rough estimates are used for this step to obtain total forestry carbon balances. The objectives of this study were (1) to examine the fate of timber harvested in Thuringian state forests (central Germany), representing a large, intensively managed forested region, and (2) to quantify carbon stocks and the lifetime of primary wood products made from this timber. The analyses were based on the amount and assortments of actually sold timber, and production parameters of the companies that bought and processed this timber. In addition, for coniferous stands of a selected Thuringian forest district, we calculated potential effects of management, as expressed by different thinning regimes on wood products and their lifetimes. Total annual timber sale of soft- and hardwoods from Thuringian state forests (195,000 ha) increased from about 136,893 t C (~0.7 t C ha⁻¹ year⁻¹) in 1996 to 280,194 t C (~1.4 t C ha⁻¹ year⁻¹) in 2005. About 47% of annual total timber harvest went into short-lived wood products with a mean residence time (MRT) < 25 years. Thirty-one per cent of the total harvest went into wood products with an MRT of 25–43 years, and only 22% was used as construction wood and glued wood, products with the longest MRT (50 years). The average MRT of carbon in harvested wood products was 20 years. Thinning from above throughout the rotation of spruce forests would lead to an average MRT in harvested wood products of about 23 years, thinning from below of about 18 years. A comparison of our calculations with estimates that resulted from the products module of the CO2FIX model (Nabuurs et al. 2001) demonstrates the influence of regional differences in forest management and wood processing industry on the lifetime of harvested wood products. To our knowledge, the present study provides for the first time real carbon inputs of a defined forest management unit to the wood product sector by linking data on raw timber production, timber sales and wood processing. With this new approach and using this data, it should be possible to substantially improve the net-carbon balance of the entire forestry sector.     

The effect of forest management on trace gas exchange at the pedosphere–atmosphere interface in beech (<Emphasis Type="Italic">Fagus sylvatica</Emphasis> L.) forests stocking on calcareous soils

The effect of forest management (thinning) on in situ carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O) trace gas exchange between soil and atmosphere was studied in three consecutive years at three beech forest sites, which differ in aspect [southwest (SW), northeast (NE), northwest (NW)]. At all sites adjacent thinning plots (“T”) and untreated control plots (“C”) were established. Measurements at the SW and NE sites covered the years 4–6 after thinning while at the NW site measurements covered the year before and the first 2 years after thinning. Mean N₂O fluxes were <3 μg N₂O–N m⁻² h⁻¹ at all plots except for the newly thinned NWT plot. CH₄ uptake was rather low, too. Very low CH₄ oxidation rates during dry periods are explained by physiological drought stress for CH₄ oxidizers. Heterotrophic litter decomposition constitutes the largest part of total soil respiration. On the whole, no significant positive or negative effects of the silvicultural treatment on the magnitude of CO₂-, CH₄- and N₂O-trace gas exchange could be observed at the SW site 4–6 years after thinning. Also at the NE site, no effects of thinning on CO₂ and N₂O fluxes could be demonstrated. However, at this site a significant moisture-induced lower CH₄ uptake could be shown. At the NW site forest management led to a dramatic increase in N₂O emissions in the first two summers after thinning and to distinct effects on CO₂ emissions and CH₄ uptake in the first year after the felling. The unambiguous effects of thinning at the NW site are mainly related to higher C input by dead residues leading to enhanced mineralization activity, to a shift in the competition for nutrients favoring microorganisms as compared to trees and to changes in the soil water availability at the thinned plot. Considering the data obtained from the NE and SW site we expect that with the development of an understorey vegetation at the NW site the observed effects on the magnitude of trace gas exchange due to thinning will continue to decline in the following years. Our results implicate that it is indispensable to take account of the effects of forest management in order to accurately calculate trace gas emission inventories for the investigated forest ecosystem in case thinning took place immediately before.     

Carbon,Fossil Fuel,and Biodiversity Mitigation With Wood and Forests

Life-cycle analyses, energy analyses, and a range of utilization efficiencies were developed to determine the carbon dioxide (CO₂) and fossil fuel (FF) saved by various solid wood products, wood energy, and unharvested forests. Some products proved very efficient in CO₂ and FF savings, while others did not. Not considering forest regrowth after harvest or burning if not harvested, efficient products save much more CO₂ than the standing forest; but wood used only for energy generally saves slightly less. Avoided emissions (using wood in place of steel and concrete) contributes the most to CO₂ and FF savings compared to the product and wood energy contributions. Burning parts of the harvested logs that are not used for products creates an additional CO₂ and FF savings. Using wood substitutes could save 14 to 31% of global CO₂ emissions and 12 to 19% of global FF consumption by using 34 to 100% of the world’s sustainable wood growth. Maximizing forest CO₂ sequestration may not be compatible with biodiversity. More CO₂ can be sequestered synergistically in the products or wood energy and landscape together than in the unharvested landscape. Harvesting sustainably at an optimum stand age will sequester more carbon in the combined products, wood energy, and forest than harvesting sustainably at other ages.     

A comparison of carbon assessment methods for optimizing timber production and carbon sequestration in Scots pine stands

Projected changes in forest carbon stocks and carbon balance differ according to the choice of estimation methods and the carbon pools considered. Here, we compared three carbon assessment methods for optimizing timber production and carbon sequestration in six example Scots pine (Pinus sylvestris L.) stands in Finland. The forest carbon stock was assessed, with three methods: stem carbon, biomass expansion factors (BEFs), and a process-based model. Given a carbon price of 40 € t⁻¹ (equivalent to 10.9 € t⁻¹ CO₂) and a 3% discount rate, the highest average carbon stock and mean annual increment (MAI) were obtained with the BEF method. Increasing the carbon price from 0 to 200 € t⁻¹ resulted in longer optimal rotations and higher MAI, and increased the average carbon stock, especially when carbon was assessed by the BEF method. Comparison of these carbon assessment methods, using economic sensitivity analyses, indicated that optimal thinning regimes and average carbon stocks are strongly dependent on the assessment method. The process-based method led to less frequent thinnings and shorter rotations than the BEF method, due to different predictions of biomass production. As a cost-effective option, optimal thinning regimes play a very important role in timber production and carbon sequestration.     

Development strategies for privately owned forestry in the mountainous region of Sweden

Forestry in Sweden as well as in other European countries is characterised by intense and increasing international competition resulting in decreasing roundwood prices in real terms. This is especially the situation in the mountainous region of Sweden with long transportation distances between the felling site and the processing industries located at the coast. The question arises whether forestry must be run more extensively than at present to achieve the optimal rate of silvicultural activities compared with the amount of timber cut. With this in mind, optimising economic analyses have been performed at the stand level as well as at the level of forest estates. Results of the analyses reveal that more intensive thinning (more frequent operations) and shorter rotation periods would increase profit and offset continuously decreasing roundwood prices. Intensive pre-commercial thinning (cleaning) is especially important for profitability of the subsequent thinnings and the final cut. The large number of cuts during the rotation will increase logging costs. However, this will be more than offset by the increasing production of economically matured dimensions of timber, an effect that will be still more pronounced when using new harvesting technology. Moreover, frequent high thinning operations (thinning ‘from above’ or removal of dominant trees) will result in more dense wood close to the pith, more evenly distributed year rings, and fewer and smaller knots in the lower part of the stem — in other words more valuable roundwood which will justify high transportation costs. Several biological and technical aspects of these treatment programs are discussed in the paper.     

Climate change mitigation through increased wood use in the European construction sector—towards an integrated modelling framework

Using wood as a building material affects the carbon balance through several mechanisms. This paper describes a modelling approach that integrates a wood product substitution model, a global partial equilibrium model, a regional forest model and a stand-level model. Three different scenarios were compared with a business-as-usual scenario over a 23-year period (2008?C2030). Two scenarios assumed an additional one million apartment flats per year will be built of wood instead of non-wood materials by 2030. These scenarios had little effect on markets and forest management and reduced annual carbon emissions by 0.2?C0.5% of the total 1990 European GHG emissions. However, the scenarios are associated with high specific CO₂ emission reductions per unit of wood used. The third scenario, an extreme assumption that all European countries will consume 1-m³ sawn wood per capita by 2030, had large effects on carbon emission, volumes and trade flows. The price changes of this scenario, however, also affected forest management in ways that greatly deviated from the partial equilibrium model projections. Our results suggest that increased wood construction will have a minor impact on forest management and forest carbon stocks. To analyse larger perturbations on the demand side, a market equilibrium model seems crucial. However, for that analytical system to work properly, the market and forest regional models must be better synchronized than here, in particular regarding assumptions on timber supply behaviour. Also, bioenergy as a commodity in market and forest models needs to be considered to study new market developments; those modules are currently missing.     

Post-fire salvage logging reduces carbon sequestration in Mediterranean coniferous forest

Post-fire salvage logging is a common silvicultural practice around the world, with the potential to alter the regenerative capacity of an ecosystem and thus its role as a source or a sink of carbon. However, there is no information on the effect of burnt wood management on the net ecosystem carbon balance. Here, we examine for the first time the effect of post-fire burnt wood management on the net ecosystem carbon balance by comparing the carbon exchange of two treatments in a burnt Mediterranean coniferous forest treated by salvage logging (SL, felling and removing the logs and masticating the woody debris) and Non-Intervention (NI, all trees left standing) using eddy covariance measurements. Using different partitioning approaches, we analyze the evolution of photosynthesis and respiration processes together with measurements of vegetation cover and soil respiration and humidity to interpret the differences in the measured fluxes and underlying processes. Results show that SL enhanced CO₂ emissions of this burnt pine forest by more than 120 g C m⁻² compared to the NI treatment for the period June-December 2009. Although soil respiration was around 30% higher in NI during growing season, this was more than offset by photosynthesis, as corroborated by increases in vegetation cover and evapotranspiration. Since SL is counterproductive to climate-change and Kyoto protocol objectives of optimal C sequestration by terrestrial ecosystems, less aggressive burnt wood management policies should be considered.     

Timber mobilization and habitat tree retention in low-elevation mixed forests in Switzerland: an inventory-based scenario analysis of opportunities and constraints

Timber use in central Europe is expected to increase in the future, in line with forest policy goals to strengthen local wood supply for CO₂-neutral energy production, construction and other uses. Growing stocks in low-elevation forests in Switzerland are currently high as exemplified by the Swiss canton of Aargau, for which an average volume of 346 ± 16 m³ ha⁻¹ was measured in the 3rd Swiss National forest inventory (NFI) in 2004–2006. While this may justify a reduction of growing stocks through increased timber harvesting, we asked whether such a strategy may conflict with the sustainability of timber production and conservation goals. We evaluated a range of operationally relevant forest management scenarios that varied with respect to rotation length, growing stock targets and the promotion of conifers in the regeneration. The scenarios aimed at increased production of softwood, energy wood, the retention of potential habitat trees (PHTs) and the conversion to a continuous cover management system. They were used to drive the inventory-based forest simulator MASSIMO for 100 years starting in 2007 using the NFI sampling plots in Aargau. We analyzed model outputs with respect to projected future growing stock, growth, timber and energy yield and harvesting costs. We found growing stock to drop to 192 m³ ha⁻¹ in 2106 if business-as-usual (BAU as observed between the 2nd and 3rd NFI) timber volumes were set as harvesting targets for the whole simulation period. The promotion of conifers and a reduction of rotation lengths in a softwood scenario yielded 25% more timber over the whole simulation period than BAU. An energy wood scenario that reduced growing stock to 200 m³ ha⁻¹ by 2056 and promoted the natural broadleaved regeneration yielded 9% more timber than BAU before 2056 and 30% less thereafter due to decreasing increments. The softwood scenario resulted in higher energy yield than the energy wood scenario despite the lower energy content of softwood. Retaining PHT resulted in a reduction of timber harvest (0.055 m³ ha⁻¹ yr⁻¹ per habitat tree) and higher harvesting costs. Continuous cover management yielded moderate timber amounts throughout the simulation period, yet sustainably. Considering climate change, we discuss the risks associated with favoring drought- and disturbance-susceptible conifers at low elevations and emphasize that continuous cover management must allow for the regeneration of drought-adapted tree species. In conclusion, our simulations show potential for short-term increases in timber mobilization but also that such increases need to be carefully balanced with future forest productivity and other forest ecosystem services.

     

Commercial thinning that maintained species diversity of a mixed black spruce–jack pine stand enhanced productivity

Commercial thinning enables forest managers to meet timber production objectives. Thinning reduces tree density to alleviate competition for resources and favour growth of selected tree species. However, in doing so, thinning can homogenize the composition of mixed-species forests and raise biodiversity issues. There is increasing evidence that species richness can lead to higher productivity through a complementarity effect. Hence, thinning that would maintain species diversity of mixed-species forests could enhance stand productivity and help forest managers to reconcile timber production objectives and biodiversity issues. The objective of this study was to compare post-thinning stand production, experimentally over 10 years, in mixed and monospecific stands of black spruce (Picea mariana [Mill.] B.S.P.) and jack pine (Pinus banksiana Lamb.). The post-thinning stand production curve of the mixed stand converged toward that of the unthinned mixed stand while the production curves of the thinned and unthinned monospecific stands remained parallel. The convergent productivity of the mixed stand could be explained by a positive interaction between effects of thinning and niche complementarity. We propose that thinning that maintains species diversity of mixed stands could help forest managers who are implementing ecosystem management to reconcile timber production objectives with biodiversity issues.     

The effects of a thinning treatment on carbon stocks in a northern Arizona ponderosa pine forest

Vast areas of ponderosa pine (Pinus ponderosa Dougl. ex Laws.) forest in the western United States have become unnaturally dense because of relatively recent land management practices that include fire suppression and livestock grazing. In many areas, thinning treatments can re-establish the natural ecological processes and help restore ecosystem structure and function. Precipitous global climate change has focused attention on the carbon storage in forests. An unintended consequence of fire suppression has been the increased storage of carbon in ponderosa stands. Thinning treatments reduce standing carbon stocks while releasing carbon through the combustion of fuel in logging machinery, burning slash, and the decay of logging slash and wood products. These reductions and releases of stored carbon must be compared to the risk of catastrophic fire burning through the stand and releasing large quantities of carbon to the atmosphere to more fully understand the costs and benefits – in carbon terms – of forest restoration strategies.     

Simulated yield and quality distribution of sawn timber from final felling in a Norway spruce [Picea abies (L.) Karst.] stand with varying thinning regimes: A case study

Abstract

An integrated simulation tool, formed by integrating the InnoSIM sawing simulation system with the RetroSTEM simulator, was used to convert available wood raw materials from final felling into sawn timber, allowing for calculation of the three-dimensional wood properties of individual stems (stem geometry, heartwood formation, knottiness) as well as the volume, quality and value of sawn timber in a Norway spruce stand with different thinning regimes (unthinned, normal and intensively thinned). Based on the input data of sawing patterns, the simulations indicate that there are relatively small differences (<8%) in the volume yield (m³ha^?1) of sawn goods resulting from sawlogs available from final felling with different thinning practices. However, intensive thinning yielded the largest stem diameters and the greatest volumes (m³ha^?1) of large-sized centre goods (thickness: 50, 63, 75 mm) of rather poor quality. Normal thinning yielded the largest volume of A-grade side boards and centre goods (m³ha^?1), as well as the best total value ([euro]ha^?1) of sawn timber. Differences observed in sawn timber quality distribution can contribute to even more significant variation in value yields, if pricing mechanisms of timber products change to favour higher grade timber products.     

Uncertainty of 21st century growing stocks and GHG balance of forests in British Columbia, Canada resulting from potential climate change impacts on ecosystem processes

Over the coming decades, climate change will increasingly affect forest ecosystem processes, but the future magnitude and direction of these responses is uncertain. We designed 12 scenarios combining possible changes in tree growth rates, decay rates, and area burned by wildfire with forecasts of future harvest to quantify the uncertainty of future (2010-2080), timber growing stock, ecosystem C stock, and greenhouse gas (GHG) balance for 67 million ha of forest in British Columbia, Canada. Each scenario was simulated 100 times with the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3). Depending on the scenario, timber growing stock over the entire land-base may increase by 14% or decrease by 9% by 2080 (a range of 2.8 billion m³), relative to 2010. However, timber growing stock available for harvest was forecast to decline in all scenarios by 26-62% relative to 2010 (a range of 1.2 billion m³). Forests were an annual GHG source in 2010 due to an ongoing insect outbreak. If half of the C in harvested wood was assumed to be immediately emitted, then 0-95% of simulations returned to annual net sinks by 2040, depending on scenario, and the cumulative (2010-2080) GHG balance ranged from a sink of −4.5 Pg CO₂e (−67 Mg CO₂e ha⁻¹) for the most optimistic scenario, to a source of 4.5 Pg CO₂e (67 Mg CO₂e ha⁻¹) for the most pessimistic. The difference in total ecosystem carbon stocks between the most optimistic and pessimistic scenarios in 2080 was 2.4 Pg C (36 Mg C ha⁻¹), an average difference of 126 Tg CO₂e yr⁻¹ (2 Mg CO₂e yr⁻¹ ha⁻¹) over the 70-year simulation period, approximately double the total reported anthropogenic GHG emissions in British Columbia in 2008. Forests risk having reduced growing stock and being GHG sources under many foreseeable scenarios, thus providing further feedback to climate change. These results indicate the need for continued monitoring of forest responses to climatic and global change, the development of mitigation and adaptation strategies by forest managers, and global efforts to minimize climate change impacts on forests.     

Carbon sequestration in the growing stock of trees in Finland under different cutting and climate scenarios

In this work the aim was to determine how carbon sequestration in the growing stock of trees in Finland is dependent on the forest management and increased production potential due to climate change. This was analysed for the period 2003–2053 using forest inventory data and the forestry model MELA. Four combinations of two climate change and two management scenarios were studied: current (CU) and gradually warming (CC) climate and forest management strategies corresponding to different rates of utilisation of the cutting potential, namely maximum sustainable removal (Sust) or maximum net present value (NPV) of wood production (Max). In this analysis of Finland, the initial amount of carbon in the growing stock was 765 Mt (2,802 Tg CO₂). At the end of the simulation, the carbon in the growing stock of trees in Finland had increased to 894 Mt (3,275 Tg CO₂) under CUSust, 906 Mt (3,321 Tg CO₂) under CUMax, 1,060 Mt (3,885 Tg CO₂) under CCSust and 1,026 Mt (3,758 Tg CO₂) under CCMax. The results show that future development of carbon in the growing stock is not only dependent on climate change scenarios but also on forest management. For example, maximising the NPV of wood production without sustainability constraints results, over the short term, in a large amount of wood obtained in regeneration cuttings and a consequent decrease in the amount of carbon in growing stock. Over the longer term, this decrease in the carbon of growing stock in regenerated forests is compensated by the subsequent increase in fast-growing young forests. By comparison, no drastic short-term decrease in carbon stock was found in the Sust scenarios; only minor decreases were observed.     

次生阔叶林改建为食用菌原料林后的群落恢复和林分生长

选择12年生林相较好的天然次生阔叶林,通过择伐更新和皆伐人促更新2种经营方式定向培育食用菌原料林。研究发现,择伐经营的经济效益较高,且有利于群落的快速恢复,经过7a的封育,林分蓄积量已达到择伐前的水平。皆伐人促更新获得的食用菌材虽较择伐利用高出40%左右,但因经营强度过大,保留的幼树受损严重而不利于伐后林木的生长与恢复,封育期内蓄积增长量分别为择伐更新和对照未经营区的64 7%和73 41%。动态监测结果显示,采用择伐和皆伐人促更新措施后群落恢复较快。疏伐后因透光度的急剧增加,阳性和中性树种大量侵入,地面芽植物和1年生植物的比例增高。到第7a时,高位芽植物的比例已接近未经营区的状态,乔、灌、草各层的物种多样性指数高于未经营的天然阔叶林,物种均匀度则与其相近。研究还发现,2种更新经营方式对土壤养分的损失较小,经过7a的恢复,林地土壤肥力已基本达到原有天然林水平。     

A statistical thinning model for initialising large-scale ecosystem models

Abstract

Large-scale ecosystem models are important tools for carbon assessment at national scales. Many of these models are not initialised with known field data from any particular time, but simulate the growth of each stand from its estimated germination year up to the present or future. The models will overestimate current-day standing volume or biomass unless historic stand management (biomass removal due to thinning) is taken into account. The full management history of each stand is rarely known, and must be somehow estimated. One possibility is to build statistical thinning models based on data in a National Forest Inventory, which could then be integrated into the ecosystem models. If the harvesting model is constructed using only variables that are also used within the ecosystem model, then the management impacts can be included in the ecosystem model for the entire simulated life of the stand. In the case of most flux dynamics models, this precludes the use of the tree-level data that harvesting models have traditionally relied on. In this article, we develop a novel means to interrogate a subset of the Austrian National Forest Inventory based on deriving probability density functions for particular combinations of stand and site variables. We determine the parameters of a probabilistic model to estimate historic patterns of timber removals and validate it against inventory estimates. Our procedure can establish supportable estimates of historic management regimes suitable as input data for subsequent modelling of national-scale forest carbon stocks, sources and sinks.     

Soil CO<Subscript>2</Subscript>, CH<Subscript>4</Subscript> and N<Subscript>2</Subscript>O emissions from production fields with planted and remnant hedgerows in the Fraser River Delta of British Columbia

Planting hedgerows on farm field edges can help mitigate greenhouse gas (GHG) emissions from agricultural landscapes by sequestering carbon (C) in woody biomass and in soil. Sequestration rates however, must be assessed in terms of their overall global warming potential (GWP) which must also consider GHG emissions. The objectives of this study were to (1) compare carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O) emissions from two types of hedgerows and adjacent annual agricultural production fields, and 2) better understand how climate, soil properties and plant species configurations affect hedgerow GHG emissions. At eight study sites in the lower Fraser River delta of British Columbia, we measured emissions from soil in both planted (P-Hedgerow) and remnant hedgerows (R-Hedgerow), as well as in adjacent annual crop production fields over 1 year using a closed-static chamber method. CO₂ emissions were 59 % higher in P-Hedgerow than R-Hedgerow, yet there were no significant differences of relative emissions of CH₄ and N₂O. The environmental variables that explained the variation in emissions differed for the three GHGs. CO₂ emissions were significantly correlated with soil temperature. CH₄ and N₂O and emissions were marginally significantly correlated with soil organic carbon (SOC) and soil water-filled pore space (WFPS), respectively. Emissions were not significantly correlated with hedgerow plant species diversity. While hedgerows sequester carbon in their woody biomass, we demonstrated that it is critical to measure hedgerow emissions to accurately ascertain their overall GHG mitigation potential. Our results show that there are no CO₂e emission differences between the management options that plant new diverse hedgerows or conserve existing hedgerows.     

Estimating carbon stock in secondary forests: Decisions and uncertainties associated with allometric biomass models

Secondary forests are a major terrestrial carbon sink and reliable estimates of their carbon stocks are pivotal for understanding the global carbon balance and initiatives to mitigate CO₂ emissions through forest management and reforestation. A common method to quantify carbon stocks in forests is the use of allometric regression models to convert forest inventory data to estimates of aboveground biomass (AGB). The use of allometric models implies decisions on the selection of extant models or the development of a local model, the predictor variables included in the selected model, and the number of trees and species for destructive biomass measurements. We assess uncertainties associated with these decisions using data from 94 secondary forest plots in central Panama and 244 harvested trees belonging to 26 locally abundant species. AGB estimates from species-specific models were used to assess relative errors of estimates from multispecies models. To reduce uncertainty in the estimation of plot AGB, including wood specific gravity (WSG) in the model was more important than the number of trees used for model fitting. However, decreasing the number of trees increased uncertainty of landscape-level AGB estimates substantially, while including WSG had limited effects on the accuracy of the landscape-level estimates. Predictions of stand and landscape AGB varied strongly among models, making model choice an important source of uncertainty. Local models provided more accurate AGB estimates than foreign models, but high variability in carbon stocks across the landscape implies that developing local models is only justified when landscape sampling is sufficiently intensive.     

Crop residue effect on crop performance,soil N<Subscript>2</Subscript>O and CO<Subscript>2</Subscript> emissions in alley cropping systems in subtropical China

Land management practices that simultaneously improve soil properties are crucial to high crop production and minimize detrimental impact on the environment. We examined the effects of crop residues on crop performance, the fluxes of soil N₂O and CO₂ under wheat-maize (WM) and/or faba bean-maize (FM) rotations in Amorpha fruticosa (A) and Vetiveria zizanioides (V) intercropping systems on a loamy clay soil, in subtropical China. Crop performance, soil N₂O and CO₂ as well as some potential factors such as soil water content, soil carbon, soil nitrogen, microbial biomass and N mineralization were recorded during 2006 maize crop cultivation. Soil N₂O and CO₂ fluxes are determined using a closed-based chamber. Maize yield was greater after faba bean than after wheat may be due to differences in supply of N from residues. The presence of hedgerow significantly improved maize grain yields. N₂O emissions from soils with maize were considerably greater after faba bean (345 g N₂O–N ha⁻¹) than after wheat (289 g N₂O–N ha⁻¹). However, the cumulated N₂O emissions did not differ significantly between WM and FM. The difference in N₂O emissions between WM and FM was mostly due to the amounts of crop residues. Hedgerow alley cropping tended to emit more N₂O than WM and FM, in particular A. fruticosa intercropping systems. Over the entire 118 days of measurement, the N₂O fluxes represented 534 g N₂O–N ha⁻¹ (AWM) and 512 g N₂O–N ha⁻¹ (AFM) under A. fruticosa species, 403 g N₂O–N ha⁻¹ (VWM) and 423 g N₂O–N ha⁻¹ (VFM) under Vetiver grass. We observed significantly higher CO₂ emission in AFM (5,335 kg CO₂–C ha⁻¹) from June to October, whereas no significant difference was observed among WM (3,480 kg CO₂–C ha⁻¹), FM (3,302 kg CO₂–C ha⁻¹), AWM (3,877 kg CO₂–C ha⁻¹), VWM (3,124 kg CO₂–C ha⁻¹) and VFM (3,309 kg CO₂–C ha⁻¹), indicating the importance of A. fruticosa along with faba bean residue on CO₂ fluxes. As a result, crop residues and land conversion from agricultural to agroforestry can, in turn, influence microbial biomass, N mineralization, soil C and N content, which can further alter the magnitude of crop growth, soil N₂O and CO₂ emissions in the present environmental conditions.     

Soil CO<Subscript>2</Subscript> emissions in agricultural watersheds with agroforestry and grass contour buffer strips

The potential for agricultural soils to act as a sink and sequester carbon (C) or a source and emit carbon dioxide (CO₂) is largely dependent upon the agricultural management system. The establishment of permanent vegetation, such as trees and grass contour buffer strips, may cause accumulation of above- and below-ground C over time, thereby acting as a sink for tropospheric CO₂. However, the effects of contour grass strips and grass-tree strips (agroforestry) on soil CO₂ emissions have not been extensively studied in row-crop watersheds in the temperate regions. The objective of this study was to determine the effects of agroforestry and grass contour buffer strips and landscape position on soil surface efflux rate of CO₂ in three adjacent agricultural watersheds with claypan soils in northeast Missouri. The three watersheds were in a corn-soybean rotation, and contained (1) cropped only (CR), (2) cropped with grass contour strips (GR), or (3) cropped with tree-grass contour strips (AF) management systems. Soil surface CO₂ efflux was measured throughout the 2004 growing season at the upper (UBS), middle (MBS), and lower (LBS) backslope landscape positions within the three watersheds. The cumulative soil CO₂ production was lowest in the CR (0.9 kg CO₂-C m⁻²) compared to the AF (1.5 kg CO₂-C m⁻²) and GR watersheds (1.5 kg CO₂-C m⁻²). The lower backslope position (1.6 kg CO₂-C m⁻²) across all three watersheds produced 32 and 40% greater cumulative soil CO₂ than the upper and middle backslope positions, respectively. A 72-day incubation study determined the effects of 40, 60, 80, and 100% soil water-filled pore space (WFPS) and N rate (0 and 1.39 g KNO₃ kg soil⁻¹) on soil CO₂ efflux from bulk soil collected under each management system. The cumulative CO₂ production was highest in the grass soil (1,279 mg CO₂-C kg soil⁻¹) compared to the agroforestry (661 mg CO₂-C kg soil⁻¹) and cropped (483 mg CO₂-C kg soil⁻¹) soils regardless of WFPS and N rate. The highest cumulative CO₂ production for the grass soil (1,279 mg CO₂-C kg soil⁻¹) occurred at 80% WFPS, and was approximately 2 to 2.6 times greater than the agroforestry and cropped soils at 80% WFPS. The results of this study indicate that conservation management practices, such as grass and grass-tree contour buffer strips, and landscape position affect soil surface CO₂ production and accumulation of soil organic C that may influence soil C sequestration.     

High-severity wildfire effects on carbon stocks and emissions in fuels treated and untreated forest

Forests contain the world's largest terrestrial carbon stocks, but in seasonally dry environments stock stability can be compromised if burned by wildfire, emitting carbon back to the atmosphere. Treatments to reduce wildfire severity can reduce emissions, but with an immediate cost of reducing carbon stocks. In this study we examine the tradeoffs in carbon stock reduction and wildfire emissions in 19 fuels-treated and -untreated forests burned in twelve wildfires. The fuels treatment, a commonly used thinning ‘from below’ and removal of activity fuels, removed an average of 50.3 Mg C ha⁻¹ or 34% of live tree carbon stocks. Wildfire emissions averaged 29.7 and 67.8 Mg C ha⁻¹ in fuels treated and untreated forests, respectively. The total carbon (fuels treatment plus wildfire emission) removed from treated sites was 119% of the carbon emitted from the untreated/burned sites. However, with only 3% tree survival following wildfire, untreated forests averaged only 7.8 Mg C ha⁻¹ in live trees with an average quadratic mean tree diameter of 21 cm. In contrast, treated forest averaged 100.5 Mg C ha⁻¹ with a live tree quadratic mean diameter of 44 cm. In untreated forests 70% of the remaining total ecosystem carbon shifted to decomposing stocks after the wildfire, compared to 19% in the fuels-treated forest. In wildfire burned forest, fuels treatments have a higher immediate carbon ‘cost’, but in the long-term may benefit from lower decomposition emissions and higher carbon storage.