Intercellular spaces enhance potato tuber elasticity

Summary The intercellular volume within tuber tissue increases with tuber maturation. At the same time, both tuber injury after mechanical load and lentical perforation after water uptake by tubers in wet peat decreases. The degree of tuber injury is correlated with intercellular space (r=−0.667,n=16) and with water saturation of tissue (r=0.697,n=16). The tubers lose water during storage. In wet soil wilted tubers take up significantly higher amounts of water than turgid tubers, and lenticel perforation is much more frequent. Tuber maturation in autumn and low water loss during storage enhance the cushioning effect of the intercellular gas volume of tuber tissue against outside mechanical load and internal tension after water uptake.     

Light and genotype effects on in vitro tuberization of potato plantlets

Summary In vitro tuberization responses of eleven clones of potato were evaluated under different photoperiods and light intensities. No growth regulators were added to the medium to avoid the potential modification of the response to the environmental stimuli. Plantlets were grown on MS medium containing 3% sucrose for four weeks under long days (16 h). Tuberization was induced by short days (8 h). Five photoperiodic combinations and three light intensity treatments were applied. Light applied after the tuber induction phase delayed or inhibited tuber initiation (at proper photoperiods both at 111 and 55 μmol m⁻² s⁻¹ light intensities at 24/15 °C day/night temperature). Darkness following the induction stage accelerated and synchronized tuber initiation after high light intensity. However, these effects of dark treatment depended on light intensity applied in short days before dark treatment. There was an interaction between the duration of darkness applied in photoperiodic treatments and the light intensity applied in short days on tuber initiation. No relationship was observed between the maturity groups of clones tested and their tuber initiation responses. Tight interaction (P≤0.01) of treatments and clones was proved by statistical analysis. Reliable tuberization and high rate of tuberization (1.20–1.52) can be reached using these hormon-free systems.     

Yield prediction using the SUBSTOR-potato model under Argentinian conditions

Summary The use of crop simulation models to predict yield, associated with decision support systems such as Decision Support System for Agrotechnology Transfer (DSSAT), are useful tools to test different management strategies. The potato growth model included in DSSAT is SUBSTOR-potato. To evaluate its performance in Argentina it was calibrated and validated using experimental results from different sites and years. Cultivar-specific coefficients were obtained during calibration. Validation based on several independent sets of field data, including cvs Huinkul, Kennebec, Mailén and Spunta showed good agreement (R²=0.915; n=24) between observed and simulated values in normal ranges of tuber yields. However, when the input parameter maturity date was not taken into account, tuber yields were overvalued due to an overestimation of LAI values during maturation. To solve this problem, a genetic coefficient for the duration of tuber filling needs to be included in the model.     

Diel changes in tuber volume

Summary The long-term and short-term changes in volume of tubers from plants grown under controlled conditions, when assessed by an accurate, non-destructive tuber-volume meter, showed sigmoid increases in volume. The diel changes were remarkable: the rate of volume increase was very high shortly after the onset of the dark phase, but it declined sharply directly after the onset of the light phase; it was much faster during the night than during the day, especially in the later stages of growth. The nocturnal rate of volume increase was greatest when the tubers showed their greatest overall rate of growth. The daytime increases in volume were fastest during the early stages of tuber development. The key process underlying these phenomena seems to be the movement of water out of and into the tuber.     

Variation in the duration of tuber dormancy within a seed potato lot

Summary The variation in duration of dormancy within a seed tuber lot was studied over three years by harvesting individual plants of cvs Diamant and Désirée from field plots and by storing the tubers at 18°C. The variation in dormancy within a tuber lot was large (especially for cv. Diamant) and was mainly caused by variation within plants. For cv. Diamant there was a close negative relation between dormancy and the cube root of tuber weight, whereas for cv. Désirée a relation with tuber weight was almost absent. The duration of dormancy of a seed lot comprising tubers with a narrow range in weight can be well described by two parameters. It is proposed to maintain the moment of 80% sprouting as the criterion for the end of dormancy of a tuber lot and to characterize the spread in dormancy duration by the time lapse between 10% and 90% sprouting.     

Effects of a short period of drought on changes in tuber volume and specific leaf weight. I. Long-term changes

Summary Single-stemmed potato plants, cv. Bintje, were grown on a nutrient solution under controlled conditions. They were exposed to a short drought stress, or remained untreated. Long-term measurements of tuber volume were carried out with a non-destructive volume-meter. Specific leaf weight was monitored with a β-gauge. Tubers from the same plant varied in rate and duration of growth. The relative growth of stressed tubers was 43–54% less than that of the control tubers. The hierarchy of tubers from one stem changed over time in plants that were exposed to the stress. Specific leaf weight declined during the stress period but there was a prompt recovery after the relief from drought. This response was similar to the response of the average rate of volume increase of the tuber.     

Rapid seed multiplication by planting into beds micro tubers and in vitro plants

Summary Micro tubers of 3 weight categories with means of 0.63 g, 1.25 g or 2.50 g and in vitro plants were planted in nursery beds at densities of 24 and 48 plants per m². The average tuber numbers and tuber weights were, respectively, 38% and 17% higher at 48 than at 24 plants per m². In vitro plants produced significantly more but smaller tubers than did plants grown from micro tubers. Plants grown from the larger micro tubers produced a similar number of tubers but larger ones than did plants grown from small micro tubers. Tuber yields and multiplication rates are discussed.     

Somaclonal variation in tuber traits of potato

Summary About 13,000 somaclones of 17 cultivars and clones of potato were obtained from in vitro callus cultures and individually planted in a greenhouse, followed by tuber generations grown in the field. These plants were subjected to the multistage selection procedure commonly used in potato breeding. Over a period of five years and three field generations the tuber number, size, shape, eye depth, starch content, starch yield and tuber appearance of these somaclones were assessed and compared with that of the controls. These characters varied depending on donor genotype and trait. The frequency of variants was assessed and there were acceptable proportions of desirable abberrants and invariants among the somaclones. Depending on trait the average gain rate for all donor genotypes ranged between 0.2 and 2.3% for-deviants, between 12.2 and 15.5% for invariants and between 0.1–1.4% for +deviants. It is concluded that this technique should be used into potato breeding programmes to improve commercially important characteristics of specific cultivars and breeding clones.     

Effects of temperature and photoperiod on early growth and final number of tubers in potato (Solanum tuberosum L.)

Summary A phytotron experiment with all combinations of two photoperiod (12 or 18 h) and four temperature (18/12, 22/16, 26/20 or 30/24 °C; 12h/12h) treatments was carried out to analyse quantitative effects on early tuber growth, dry-matter partitioning and number of tubers of two cultivars. Higher temperatures and longer photoperiod delayed the onset of expolinear tuber growth and the onset of linear tuber bulking. Higher temperatures also gave lower absolute tuber growth rates. Photoperiod did not affect absolute tuber growth rate at lower temperatures. Higher temperature and longer photoperiod gave lower relative rates of partitioning of dry matter to the tubers. Differences between treatments in numbers of tubers initiated were inconsistent. This quantitative analysis of the effects of temperature and photoperiod on characteristics of tuber growth should prove useful in potato modelling.     

Effects of a short period of drought on changes in tuber volume and specific leaf weight. II. Diurnal changes

Summary Single-stemmed potato plants, cv. Bintje, were grown on a nutrient solution under controlled conditions. They were exposed to a short drought stress, or remained untreated. Short-term changes in tuber volume and in specific leaf weight were measured non-destructively. Tubers from control plants increased rapidly in volume during the night and did not grow, or even shrivelled during the day. Tubers of stressed plants did not show a uniform response; some tubers markedly declined in volume during the day. The patterns of volume increase of stressed plants became erratic after the stress, mainly because some plants never fully recovered. Patterns of diurnal fluctuation in tuber volume were similar to diurnal changes in specific leaf weight; tubers within the same stressed plant sometimes reacted differently. In these cases the effects on the diurnal fluctuation partly reflected the long-term effects, reported in an earlier paper.     

The infection of potatoes byPhytophthora infestans during simulated washing and its control using a hot water treatment

Summary A single blighted tuber released on average 1.39 mg ofP. infestans mycelia and sporangia during simulated washing. In subsequent experiments up to 100% of tubers were infected when healthy tubers were washed in a suspension ofP. infestans equivalent to a concentration of 1.65 μg ml⁻¹, i.e. that calculated to be in a commercial washing plant after washing a potato stock with approximately 1% of tubers infected with blight for 4 hours. Immature tubers were more prone to infection during washing than mature tubers. Damaging tubers, irrespective of their maturity, increased the incidence of tuber infection. The viability ofP. infestans isolates was significantly reduced byin vitro immersion in water at 44°C for 5 minutes. The infection of daughter tubers dipped in a suspension ofP. infestans for 3 minutes was prevented when the suspension temperature was 44°C. There was no indication of tuber damage at this temperature.     

Seed tuber production from true potato seed (TPS) in Egypt and the influence of environmental conditions in different growing periods

Summary The effect of environmental conditions on seed tuber production from true potato seed (TPS) in nurseries was evaluated in different growing periods during two seasons in Egypt. In the autumn season, high soil and air temperatures reduced emergence and initial foliage development of early-sown seedlings, and decreased tuber yields. In late-sown seedlings low night temperatures and short daylengths caused early tuberization, poor foliage development and low tuber yields. In the spring season, low temperatures and short daylengths resulted in a slow initial foliage development and early haulm-tuber competition for assimilates in early-sown seedlings. However, tuber yields were higher than for late-sown seedlings, presumably because net assimilation and assimilate partitioning to the tubers were impaired by above optimum air and soil temperatures in May and June. Slow development of true seed-sown plants caused a high sensitivity towards adverse environmental conditions and would limit yielding ability in Egypt.     

Relation between growth conditions and dormancy of seed potatoes. 1. Effects of nitrogen

Summary The duration of dormancy of seed potatoes varies between years and between origins. Therefore, the effects of conditions during crop growth on dormancy of progeny tubers were studied. The effect of nitrogen during tuber bulking on the duration of dormancy was investigated in three field experiments with two cultivars. In addition to an application of 125 kg N/ha at planting, top dressings of 0–150 kg N/ha were given about 2 weeks after tuber initiation. Haulm was pulled about 4 weeks later. The effect of nitrogen rate at planting was also examined in one experiment. Nitrogen top dressings shortened dormancy in all experiments by 5–8 days. An increased nitrogen rate at planting resulted in a shorter dormancy when the duration of dormancy was expressed in days after tuber initiation, but not when it was expressed in days after haulm pulling, probably because extra nitrogen also delayed tuber initiation.     

The response of potatoes to a single transient heat or drought stress imposed at different stages of tuber growth

Summary The effects of a single treatment of heat or drought stress imposed at different stages of tuber growth, were investigated in two potato cultivars, Désirée and Cara. Both stresses impaired dry matter accumulation in tubers, and tuber yields. Stress imposed at early stages of tuber growth, when tubers were less than 20 mm in diameter, had little effect on dry matter accumulation, whereas stress imposed later resulted ingnificant losses of dry matter in tubers. Stress imposed during later tuber growth increased the percentage of tubers sprouting in the soil. Tuber malformation was less affected. The adverse effects of heat on tuber yield and quality seemed to be greater than those of drought. Drought increased the content of total soluble solids (TSS) and lowered the osmotic potential in the tuber tissue of both cultivars. These effects were detectable even 55 days after stress relief. Contribution from the Agricultural Research Organization, The Volcani Center, Bet Dagan, Israel No 984-E, 1984 Series. This investigation was sponsored by a grant from the Ministry of Foreign Affairs, Technical Assistance Department, Netherlands.     

马铃薯块茎“定形”技术研究

马铃薯块茎的外形是重要的商品品质和加工品质。为使马铃薯块茎外形生长规则理想化,试验采用块茎开始膨大直径达2 cm左右时,在其外面加套简单模具,让块茎生长随模具而"定形"的方法,试验得到了较为理想的近圆柱形块茎。经测定"定形"块茎芽眼极浅,近乎平面,且稀少,比对照减少37.5%,菜用时切削量减少18.25%。"定形"块茎形状规则,清洗切削方便,利用率提高,具有一定的增值开发潜力。     

Effect of applying nitrogen fertilizer to a potato seed crop on the susceptibility of the daughter plants toErwinia carotovora subsp.atroseptica

Summary Seed potatoes of cvs Record and Bintje were grown with 30, 80 or 130 kg N/ha. In the subsequent growing season the seed tubers, which were inoculated or not with two concentrations ofErwinia carotovora subsp.atroseptica (Eca), were subjected to the same fertilization treatment. The incidence of blackleg and the level of seed tuber decay increased from the uninoculated treatment to the higher inoculum level, but the degree varied considerably from one year to another. Cv. Bintje was more susceptible to blackleg and yield loss caused by Eca than cv. Record. In 1990, when disease incidence was high, the proportion of blackleg stems increased with increasing doses of nitrogen fertilizer which had been applied to the seed crop, but was not significantly affected in 1988 and 1992. Seed tuber decay was retarded by the lowest nitrogen dose. The yield of the subsequent crop was not affected by the nitrogen dose applied to the seed crop.     

Comparative performance of three small seed tuber sizes and standard size seed tubers planted at similar stem densities

Summary Small seed tubers of 1–5 g, 5–10 g and 10–20 g were planted at the same sprout densities as standard size seed tubers of 40–60 g in order to give similar stem densities. Early ground cover by foliage, total yield, and yield of tubers >45 mm were consistently greater in plots planted with larger seed tubers. The effect of seed tuber size on yield and tuber number per stem varied between years but 1–5 g seed tubers always gave lower yields per stem than larger seed tubers. Reducing the spacing between rows from 90 cm to 60 cm and maintaining the same sprout density was more effective in increasing yields from small seed tubers than increasing sprout density from 20 to 40 sprouts per m² by reducing plant spacing within the row.     

Relationships between numbers of main stems and yield components of potato (Solanum tuberosum L. cv. Erntestolz) as influenced by different daylengths

Summary The relationshops between numbers of main stems and some measures of growth and yield, as well as total tuber yield, were examined for potatoes grown under different daylengths. Leaf area, tuber number and tuber yield per plant increased significantly with increasing daylength and number of main stems. Numbers of main stems and leaf area were correlated positively with tuber number and tuber yield and negatively with average tuber weight. The correlations were stronger with stem number than with leaf area and were differently affected by daylength. Standard regression coefficients indicated that stem number has strong positive and negative relationships with tuber number and average tuber weight, respectively. Since tuber number was a better determinant of yeild than average tuber weight, the final relationship between the numbers of main stems and tuber yield remained positive for all daylengths. Determinants that will best explain variation in tuber total yield, tuber number, and average tuber weight are suggested.     

种薯重量对旱地马铃薯生长发育及产量的影响

在内蒙古阴山北部丘陵区半干旱条件下,通过田间试验研究了不同重量种薯对马铃薯生长发育及产量的影响。结果表明：在干旱条件下,马铃薯植株生长发育、主茎数及块茎产量与种薯重量有着十分密切的关系。在一定范围内,随种薯重量的增加,每穴茎数相应增加,植株表现生长旺盛,单位面积产量呈上升趋势,净产量则随种薯重量的增加呈下降趋势。以５０～７５ｇ种薯净产量最高,达９２８０．５～８０３１．０ｋｇ／ｈｍ２,商品薯率较高,经济效益最佳,种薯重量≥３００ｇ,净产量最低,仅３２２５．０ｋｇ／ｈｍ２,经济效益最差。     

Soft-rot resistance combined with other tuber characters in long day-adaptedSolanum phureja

Summary Offspring were produced from a cross between two long-day-adaptedSolanum phureja clones which carried resistance to tuber soft rot (Erwinia carotovora subsp.atroseptica). In tests carried out on the produce of field-grown plants raised from tubers, over fifty per cent of the 173 offspring were found to be highly resistant. Assessments were also carried out of tuber yield, mean tuber weight, tuber number, shape, regularity, flesh colour, texture of the steamed flesh, fry colour, after-cooking blackening, sprout length after storage and overall dormancy. There were statistically significant differences between clones for all characters (P<0.001). Twelve of the clones were selected on the basis of high resistance, yield, tuber weight, regularity of shape and absence of after-cooking blackening. The value of resistant long-day-adapted diploid material for commercial breeding is discussed.