Water in Earth's lower mantle

Secondary ion mass spectrometry measurements show that Earth's representative lower mantle minerals synthesized in a natural peridotitic composition can dissolve considerable amounts of hydrogen. Both MgSiO3-rich perovskite and magnesiowüstite contain about 0.2 weight percent (wt%) H2O, and CaSiO3-rich perovskite contains about 0.4 wt% H2O. The OH absorption bands in Mg-perovskite and magnesiowüstite were also confirmed with the use of infrared microspectroscopic measurements. Earth's lower mantle may store about five times more H2O than the oceans.     

Solidus of Earth's deep mantle

The solidus of a pyrolite-like composition, approximating that of the lower mantle, was measured up to 59 gigapascals by using CO2 laser heating in a diamond anvil cell. The solidus temperatures are at least 700 kelvin below the melting temperatures of magnesiowustite, which in the deep mantle has the lowest melting temperatures of the three major components-magnesiowustite, Mg-Si-perovskite, and Ca-Si-perovskite. The solidus in the deep mantle is more than 1500 kelvin above the average present-day geotherm, but at the core-mantle boundary it is near the core temperature. Thus, partial melting of the mantle is possible at the core-mantle boundary.     

Spin transition zone in Earth's lower mantle

Mineral properties in Earth's lower mantle are affected by iron electronic states, but representative pressures and temperatures have not yet been probed. Spin states of iron in lower-mantle ferropericlase have been measured up to 95 gigapascals and 2000 kelvin with x-ray emission in a laser-heated diamond cell. A gradual spin transition of iron occurs over a pressure-temperature range extending from about 1000 kilometers in depth and 1900 kelvin to 2200 kilometers and 2300 kelvin in the lower mantle. Because low-spin ferropericlase exhibits higher density and faster sound velocities relative to the high-spin ferropericlase, the observed increase in low-spin (Mg,Fe)O at mid-lower mantle conditions would manifest seismically as a lower-mantle spin transition zone characterized by a steeper-than-normal density gradient.     

Structure and dynamics of Earth's lower mantle

Processes within the lowest several hundred kilometers of Earth's rocky mantle play a critical role in the evolution of the planet. Understanding Earth's lower mantle requires putting recent seismic and mineral physics discoveries into a self-consistent, geodynamically feasible context. Two nearly antipodal large low-shear-velocity provinces in the deep mantle likely represent chemically distinct and denser material. High-resolution seismological studies have revealed laterally varying seismic velocity discontinuities in the deepest few hundred kilometers, consistent with a phase transition from perovskite to post-perovskite. In the deepest tens of kilometers of the mantle, isolated pockets of ultralow seismic velocities may denote Earth's deepest magma chamber.     

Seismic observations of splitting of the mid-transition zone discontinuity in Earth's mantle

The transition zone of Earth's mantle is delineated by globally observed discontinuities in seismic properties at depths of about 410 and 660 kilometers. Here, we investigate the detailed structure between 410 and 660 kilometers depth, by making use of regional stacks of precursors to the SS phase. The previously observed discontinuity at about 520 kilometers depth is confirmed in many regions, but is found to be absent in others. There are a number of regions in which we find two discontinuities at about 500 and 560 kilometers depth, an effect which can be interpreted as a "splitting" of the 520 kilometer discontinuity. These observations provide seismic constraints on the sharpness and observability of mineralogical phase transitions in the mantle transition zone.     

Seismic evidence for water deep in Earth's upper mantle

Water in the deep upper mantle can influence the properties of seismic discontinuities in the mantle transition zone. Observations of converted seismic waves provide evidence of a 20- to 35-kilometer-thick discontinuity near a depth of 410 kilometers, most likely explained by as much as 700 parts per million of water by weight.     

Enhancement of cation diffusion rates across the 410-kilometer discontinuity in Earth's mantle

Rates of cation diffusion (magnesium, iron, and nickel) have been determined in olivine and its high-pressure polymorph, wadsleyite, at 9 to 15 gigapascals and 1100 degrees to 1400 degreesC for compositions that are relevant to Earth's mantle. Diffusion in olivine becomes strongly dependent on composition at high pressure. In wadsleyite, diffusion is one to two orders of magnitude faster than in olivine, depending on temperature. Homogenization of mantle heterogeneities (chemical mixing) and mineral transformations involving a magnesium-iron exchange will therefore occur considerably faster in the transition zone than at depths of less than 410 kilometers.     

Compositional heterogeneity in the bottom 1000 kilometers of Earth's mantle: toward a hybrid convection model

Tomographic imaging indicates that slabs of subducted lithosphere can sink deep into Earth's lower mantle. The view that convective flow is stratified at 660-kilometer depth and preserves a relatively pristine lower mantle is therefore not tenable. However, a range of geophysical evidence indicates that compositionally distinct, hence convectively isolated, mantle domains may exist in the bottom 1000 kilometers of the mantle. Survival of these domains, which are perhaps related to local iron enrichment and silicate-to-oxide transformations, implies that mantle convection is more complex than envisaged by conventional end-member flow models.     

Multivariable dependence of Fe-Mg partitioning in the lower mantle

High-pressure diamond-cell experiments indicate that the iron-magnesium partitioning between (Fe,Mg)SiO3-perovskite and magnesiowustite in Earth's lower mantle depends on the pressure, temperature, bulk iron/magnesium ratio, and ferric iron content. The perovskite stability field expands with increasing pressure and temperature. The ferric iron component preferentially dissolves in perovskite and raises the apparent total iron content but had little effect on the partitioning of the ferrous iron. The ferrous iron depletes in perovskite at the top of the lower mantle and gradually increases at greater depth. These changes in iron-magnesium composition should affect geochemical and geophysical properties of the deep interior.     

Structure and freezing of MgSiO3 liquid in Earth's lower mantle

First-principles molecular-dynamics simulations show that over the pressure regime of Earth's mantle the mean silicon-oxygen coordination number of magnesium metasilicate liquid changes nearly linearly from 4 to 6. The density contrast between liquid and crystal decreases by a factor of nearly 5 over the mantle pressure regime and is 4% at the core-mantle boundary. The ab initio melting curve, obtained by integration of the Clausius-Clapeyron equation, yields a melting temperature at the core-mantle boundary of 5400 +/- 600 kelvins.     

The nature of the 660-kilometer discontinuity in Earth's mantle from global seismic observations of PP precursors

The 660-kilometer discontinuity, which separates Earth's upper and lower mantle, has been detected routinely on a global scale in underside reflections of precursors to SS shear waves. Here, we report observations of this discontinuity in many different regions, using precursors to compressional PP waves. The apparent absence of such precursors in previous studies had posed major problems for models of mantle composition. We find a complicated structure, showing single and double reflections ranging in depth from 640 to 720 kilometers, that requires the existence of multiple phase transitions at the base of the transition zone. The results are consistent with a pyrolite mantle composition.     

Plutonium-fission xenon found in Earth's mantle

Data from mid-ocean ridge basalt glasses indicate that the short-lived radionuclide plutonium-244 that was present during an early stage of the development of the solar system is responsible for roughly 30 percent of the fissiogenic xenon excesses in the interior of Earth today. The rest of the fissiogenic xenon can be ascribed to the spontaneous fission of still live uranium-238. This result, in combination with the refined determination of xenon-129 excesses from extinct iodine-129, implies that the accretion of Earth was finished roughly 50 million to 70 million years after solar system formation and that the atmosphere was formed by mantle degassing.     

Variable azimuthal anisotropy in Earth's lowermost mantle

A persistent reversal in the expected polarity of the initiation of vertically polarized shear waves that graze the D' layer (the layer at the boundary between the outer core and the lower mantle of Earth) in some regions starts at the arrival time of horizontally polarized shear waves. Full waveform modeling of the split shear waves for paths beneath the Caribbean requires azimuthal anisotropy at the base of the mantle. Models with laterally coherent patterns of transverse isotropy with the hexagonal symmetry axis of the mineral phases tilted from the vertical by as much as 20 degrees are consistent with the data. Small-scale convection cells within the mantle above the D' layer may cause the observed variations by inducing laterally variable crystallographic or shape-preferred orientation in minerals in the D' layer.     

Evidence for a ubiquitous seismic discontinuity at the base of the mantle

A sharp discontinuity at the base of Earth's mantle has been suggested from seismic waveform studies; the observed travel time and amplitude variations have been interpreted as changes in the depth of a spatially intermittent discontinuity. Most of the observed variations in travel times and the spatial intermittance of the seismic triplication can be reproduced by a ubiquitous first-order discontinuity superimposed on global seismic velocity structure derived from tomography. The observations can be modeled by a solid-solid phase transition that has a 200-kilometer elevation above the core-mantle boundary under adiabatic temperatures and a Clapeyron slope of about 6 megapascal per kelvin.     

Compositional stratification in the deep mantle

A boundary between compositionally distinct regions at a depth of about 1600 kilometers may explain the seismological observations pertaining to Earth's lower mantle, produce the isotopic signatures of mid-ocean ridge basalts and oceanic island basalts, and reconcile the discrepancy between the observed heat flux and the heat production of the mid-ocean ridge basalt source region. Numerical models of thermochemical convection imply that a layer of material that is intrinsically about 4 percent more dense than the overlying mantle is dynamically stable. Because the deep layer is hot, its net density is only slightly greater than adiabatic and its surface develops substantial topography.     

The Emperor Seamounts: southward motion of the Hawaiian hotspot plume in Earth's mantle

The Hawaiian-Emperor hotspot track has a prominent bend, which has served as the basis for the theory that the Hawaiian hotspot, fixed in the deep mantle, traced a change in plate motion. However, paleomagnetic and radiometric age data from samples recovered by ocean drilling define an age-progressive paleolatitude history, indicating that the Emperor Seamount trend was principally formed by the rapid motion (over 40 millimeters per year) of the Hawaiian hotspot plume during Late Cretaceous to early-Tertiary times (81 to 47 million years ago). Evidence for motion of the Hawaiian plume affects models of mantle convection and plate tectonics, changing our understanding of terrestrial dynamics.     

Dislocation damping and anisotropic seismic wave attenuation in Earth's upper mantle

Crystal defects form during tectonic deformation and are reactivated by the shear stress associated with passing seismic waves. Although these defects, known as dislocations, potentially contribute to the attenuation of seismic waves in Earth's upper mantle, evidence for dislocation damping from laboratory studies has been circumstantial. We experimentally determined the shear modulus and associated strain-energy dissipation in pre-deformed synthetic olivine aggregates under high pressures and temperatures. Enhanced high-temperature background dissipation occurred in specimens pre-deformed by dislocation creep in either compression or torsion, the enhancement being greater for prior deformation in torsion. These observations suggest the possibility of anisotropic attenuation in relatively coarse-grained rocks where olivine is or was deformed at relatively high stress by dislocation creep in Earth's upper mantle.