From micro- to nanofabrication with soft materials

Soft materials are finding applications in areas ranging from microfluidic device technology to nanofabrication. We review recent work in these areas, discuss the motivation for device fabrication with soft materials, and describe applications of soft materials. In particular, we discuss active microfluidic devices for cell sorting and biochemical assays, replication-molded optics with subdiffraction limit features, and nanometer-scale resonators and wires formed from single-molecule DNA templates as examples of how the special properties of soft materials address outstanding problems in device fabrication.     

Microfluidic large-scale integration

We developed high-density microfluidic chips that contain plumbing networks with thousands of micromechanical valves and hundreds of individually addressable chambers. These fluidic devices are analogous to electronic integrated circuits fabricated using large-scale integration. A key component of these networks is the fluidic multiplexor, which is a combinatorial array of binary valve patterns that exponentially increases the processing power of a network by allowing complex fluid manipulations with a minimal number of inputs. We used these integrated microfluidic networks to construct the microfluidic analog of a comparator array and a microfluidic memory storage device whose behavior resembles random-access memory.     

Soft x-ray lasers and their applications

The emerging technology of soft x-ray lasers has novel applications to microscopy, lithography, and other fields. This article describes the status of soft x-ray laser research with the aim of bringing the rapid developments in this field to the attention of potential users in other disciplines. The different techniques for generating a population inversion and producing a soft x-ray laser are reviewed. The status of current research in the field and the near-term prospects are described. It is expected that the range of potential applications of soft x-ray lasers will increase as their performance improves. Work aimed at increasing the output power and progressing to shorter wavelengths with these devices is also reviewed.     

Layer-by-layer removal of graphene for device patterning

The patterning of graphene is useful in fabricating electronic devices, but existing methods do not allow control of the number of layers of graphene that are removed. We show that sputter-coating graphene and graphene-like materials with zinc and dissolving the latter with dilute acid removes one graphene layer and leaves the lower layers intact. The method works with the four different types of graphene and graphene-like materials: graphene oxide, chemically converted graphene, chemical vapor-deposited graphene, and micromechanically cleaved ("clear-tape") graphene. On the basis of our data, the top graphene layer is damaged by the sputtering process, and the acid treatment removes the damaged layer of carbon. When used with predesigned zinc patterns, this method can be viewed as lithography that etches the sample with single-atomic-layer resolution.     

Sequence-specific molecular lithography on single DNA molecules

Recent advances in the realization of individual molecular-scale electronic devices emphasize the need for novel tools and concepts capable of assembling such devices into large-scale functional circuits. We demonstrated sequence-specific molecular lithography on substrate DNA molecules by harnessing homologous recombination by RecA protein. In a sequence-specific manner, we patterned the coating of DNA with metal, localized labeled molecular objects and grew metal islands on specific sites along the DNA substrate, and generated molecularly accurate stable DNA junctions for patterning the DNA substrate connectivity. In our molecular lithography, the information encoded in the DNA molecules replaces the masks used in conventional microelectronics, and the RecA protein serves as the resist. The molecular lithography works with high resolution over a broad range of length scales from nanometers to many micrometers.     

Polymer pen lithography

We report a low-cost, high-throughput scanning probe lithography method that uses a soft elastomeric tip array, rather than tips mounted on individual cantilevers, to deliver inks to a surface in a "direct write" manner. Polymer pen lithography merges the feature size control of dip-pen nanolithography with the large-area capability of contact printing. Because ink delivery is time and force dependent, features on the nanometer, micrometer, and macroscopic length scales can be formed with the same tip array. Arrays with as many as about 11 million pyramid-shaped pens can be brought into contact with substrates and readily leveled optically to ensure uniform pattern development.     

Conductance-controlled point functionalization of single-walled carbon nanotubes

We used covalent attachments to single-walled carbon nanotubes (SWNTs) to fabricate single-molecule electronic devices. The technique does not rely on submicrometer lithography or precision mechanical manipulation, but instead uses circuit conductance to monitor and control covalent attachment to an electrically connected SWNT. Discrete changes in the circuit conductance revealed chemical processes happening in real time and allowed the SWNT sidewalls to be deterministically broken, reformed, and conjugated to target species. By controlling the chemistry through electronically controlled electrochemical potentials, we were able to achieve single chemical attachments. We routinely functionalized pristine, defect-free SWNTs at one, two, or more sites and demonstrated three-terminal devices in which a single attachment controls the electronic response.     

Microfluidic memory and control devices

We demonstrate microscopic fluidic control and memory elements through the use of an aqueous viscoelastic polymer solution as a working fluid. By exploiting the fluid's non-Newtonian rheological properties, we were able to demonstrate both a flux stabilizer and a bistable flip-flop memory. These circuit elements are analogous to their solid-state electronic counterparts and could be used as components of control systems for integrated microfluidic devices. Such miniaturized fluidic circuits are insensitive to electromagnetic interference and may also find medical applications for implanted drug-delivery devices.     

Multifunctional encoded particles for high-throughput biomolecule analysis

High-throughput screening for genetic analysis, combinatorial chemistry, and clinical diagnostics benefits from multiplexing, which allows for the simultaneous assay of several analytes but necessitates an encoding scheme for molecular identification. Current approaches for multiplexed analysis involve complicated or expensive processes for encoding, functionalizing, or decoding active substrates (particles or surfaces) and often yield a very limited number of analyte-specific codes. We present a method based on continuous-flow lithography that combines particle synthesis and encoding and probe incorporation into a single process to generate multifunctional particles bearing over a million unique codes. By using such particles, we demonstrate a multiplexed, single-fluorescence detection of DNA oligomers with encoded particle libraries that can be scanned rapidly in a flow-through microfluidic channel. Furthermore, we demonstrate with high specificity the same multiplexed detection using individual multiprobe particles.     

不同钝化材料对铜污染土壤修复的影响

为比较不同钝化材料对铜(Cu)污染土壤原位钝化修复的影响,采用田间试验方法,研究了钙基(磷灰石、石灰)、有机(生物腐植酸菌剂、生物有机肥)和硅基(新型多孔陶瓷纳米材料)等钝化材料对Cu污染土壤理化性质、土壤有效Cu含量、油菜生长及其不同部位吸收Cu的影响。结果表明,与常规施肥对照相比,钙基材料和硅基材料显著提高了土壤pH,有机材料较其他两种材料整体提高土壤养分(速效磷除外)效果明显;不同钝化材料均显著降低土壤有效Cu含量(比对照降低28.65%～36.66%),有效抑制油菜籽粒对Cu的吸收(33.84%～46.03%),其中钙基材料处理下二者降低幅度最大,分别为36.66%和46.03%;两种钙基材料处理较对照的油菜增产7.43%,有机材料和硅基材料表现减产。根据试验结果,钙基材料(尤其是石灰)通过显著提高土壤pH,降低酸性土壤Cu生物有效性,可能在安全生产的基础上有效提高油菜籽产量。     

Large-area three-dimensional molecular ordering of a polymer brush by one-step processing

Rational molecular design and processing, enabling large-area molecular ordering, are important for creating high-performance organic materials and devices. We show that, upon one-step hot-pressing with uniaxially stretched Teflon sheets, a polymer brush carrying azobenzene-containing mesogenic side chains self-assembles into a freestanding film, where the polymer backbone aligns homeotropically to the film plane and the side chains align horizontally. Such an ordered structure forms through translation of a one-dimensional molecular order of the Teflon sheet and propagates from the interface macroscopically on both sides of the film. The resultant wide-area bimorph configuration allows the polymer film to bend rapidly and reversibly when the azobenzene units are photoisomerized. The combination of polymer brushes with hot-pressing and Teflon sheets provides many possibilities in designing functional soft materials.     

Coding/decoding and reversibility of droplet trains in microfluidic networks

Droplets of one liquid suspended in a second, immiscible liquid move through a microfluidic device in which a channel splits into two branches that reconnect downstream. The droplets choose a path based on the number of droplets that occupy each branch. The interaction among droplets in the channels results in complex sequences of path selection. The linearity of the flow through the microchannels, however, ensures that the behavior of the system can be reversed. This reversibility makes it possible to encrypt and decrypt signals coded in the intervals between droplets. The encoding/decoding device is a functional microfluidic system that requires droplets to navigate a network in a precise manner without the use of valves, switches, or other means of external control.     

Microfluidic bubble logic

We demonstrate universal computation in an all-fluidic two-phase microfluidic system. Nonlinearity is introduced into an otherwise linear, reversible, low-Reynolds number flow via bubble-to-bubble hydrodynamic interactions. A bubble traveling in a channel represents a bit, providing us with the capability to simultaneously transport materials and perform logical control operations. We demonstrate bubble logic AND/OR/NOT gates, a toggle flip-flop, a ripple counter, timing restoration, a ring oscillator, and an electro-bubble modulator. These show the nonlinearity, gain, bistability, synchronization, cascadability, feedback, and programmability required for scalable universal computation. With increasing complexity in large-scale microfluidic processors, bubble logic provides an on-chip process control mechanism integrating chemistry and computation.     

Inspirations from biological optics for advanced photonic systems

Observing systems in nature has inspired humans to create technological tools that allow us to better understand and imitate biology. Biomimetics, in particular, owes much of its current development to advances in materials science and creative optical system designs. New investigational tools, such as those for microscopic imaging and chemical analyses, have added to our understanding of biological optics. Biologically inspired optical science has become the emerging topic among researchers and scientists. This is in part due to the availability of polymers with customizable optical properties and the ability to rapidly fabricate complex designs using soft lithography and three-dimensional microscale processing techniques.     

Advance of Study on Design Methods of Hydraulic System of Radio Remote Control of Construction Machinery

The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analog or digital signals which can be used to drive different actuators and mechanisms of the vehicle. The vehicle could be acted by following the controlling instructions sent by the operator. The best operation mode of construction machinery is suitable not only to manual operating but also to remote controlling in the same vehicle. The design methods of the hydraulic system used for the radio remote controlling of construction machinery are discussed. The design methods of hydraulic circuits for the actuators controlled by solenoid on-off type valves ,hydro-electronic multi-way proportional valves,closed loop proportional servo driver or threeway proportional reducing valves are discussed in detail (with real example). The design methods of the power shift transmission of electro-hydraulic controlling,the devices of braking and the directional streering are discussed in this paper.     

NMR imaging of catalytic hydrogenation in microreactors with the use of para-hydrogen

Catalysis is vital to industrial chemistry, and the optimization of catalytic reactors attracts considerable resources. It has proven challenging to correlate the active regions in heterogeneous catalyst beds with morphology and to monitor multistep reactions within the bed. We demonstrate techniques, using magnetic resonance imaging and para-hydrogen (p-H2) polarization, that allow direct visualization of gas-phase flow and the density of active catalyst in a packed-bed microreactor, as well as control over the dynamics of the polarized state in space and time to facilitate the study of subsequent reactions. These procedures are suitable for characterizing reactors and reactions in microfluidic devices where low sensitivity of conventional magnetic resonance would otherwise be the limiting factor.     

Monochromatic electron photoemission from diamondoid monolayers

We found monochromatic electron photoemission from large-area self-assembled monolayers of a functionalized diamondoid, [121]tetramantane-6-thiol. Photoelectron spectra of the diamondoid monolayers exhibited a peak at the low-kinetic energy threshold; up to 68% of all emitted electrons were emitted within this single energy peak. The intensity of the emission peak is indicative of diamondoids being negative electron affinity materials. With an energy distribution width of less than 0.5 electron volts, this source of monochromatic electrons may find application in technologies such as electron microscopy, electron beam lithography, and field-emission flat-panel displays.