The effect of nitrogenous fertiliser application on leaf traits in durum wheat in relation to grain yield and development

Nitrogen (N) fertilisation boosts the grain yield of wheat through its influence on yield components, phenology and leaf traits. Both crop growth and senescence are dependent on N supply, as are the number of kernels set per unit area and per ear, and the mean kernel size. A two-season trial of four semi-dwarf durum wheat cultivars, grown at two levels of N, was used to illustrate the effects of N on canopy temperature, leaf resistance and flag leaf senescence pattern under irrigated conditions in a Mediterranean climate, and to explore the consequences of these effects on the crop phenology, its yield and its yield components. The well-fertilised crop developed a larger leaf area index at anthesis and a lower leaf resistance, thus generating a lower canopy temperature and delayed anthesis. Its grain fill duration was shorter, in spite of its lower canopy temperature, presumably because the increased N availability resulted in the development of a stronger sink (more kernels per unit area and per ear), which was associated with earlier senescence, thereby shortening the duration of grain fill, and led to reduced kernel weight.     

Different mechanisms control lipoxygenase activity in durum wheat kernels

Yellow pigment content (YPC), lipoxygenase (LPX) activity and the polymorphism at the Lpx-B1.1 locus were assessed on an Italian durum wheat germplasm collection and four varieties contrasting for YPC and LPX activity were then characterized in terms of Lpx gene expression, biochemical LPX properties and their performance during pasta processing. The screening of 71 genotypes showed a great genetic variability for YPC (3.68–9.43 μg/g dw) and LPX activity (0.02–7.91 EU/g dw). The Lpx-B1.1 polymorphism was significantly associated with differences in LPX activity. Besides the Lpx-B1.1 deletion, different expression levels of Lpx mRNAs were found associated with differences in LPX activity. The temporal expression of three Lpx genes showed different profiles among the cultivars investigated. Genotypes with high LPX activity showed an anticipated temporal expression for Lpx-1 compared to low LPX activity ones. The LPX activity in the analysed genotypes is most likely due to the contribution of different LPX isoforms observed in the later stage of grain filling.     

Mapping kernel texture in a soft durum (Triticum turgidum subsp. durum) wheat population

Kernel texture (”hardness”) is one of the major determinants of wheat quality and is primarily controlled by the Puroindoline (Pin) genes, located at the Hardness (Ha) locus. The absence of the Ha locus is responsible for the extremely hard kernels of durum wheat (T. turgidum subsp. durum). Recently, the Pin genes from a soft common wheat variety were introgressed into durum wheat through homoeologous recombination. The objective of this study was to map kernel hardness in a soft durum wheat population derived from the cross between the varieties “Creso” and “Langdon 1–678“. In all, 428 F₆ lines were evaluated for kernel hardness through the Single Kernel Characterization System; Hardness Index (HI) values ranged from −2 to 44. The same lines were genotyped using genotyping-by-sequencing, targeted amplicon sequencing, and sequence-tagged-site markers. A total of 8537 markers were used to conduct single marker-trait association analysis and two major significant regions were identified on chromosomes 3AL and 6AS each responsible for an additive effect of ∼6 HI units. Kompetitive allele specific markers targeting these regions were selected and tested in the whole population. To date, this is the first study to investigate the genetic factors behind hardness variation in durum wheat.     

云南不同生态环境对硬粒小麦品质的影响

选用云南生产上种植的硬粒小麦品种“780”为材料，通过3个不同生态试点、两种栽培方式对硬粒小麦籽粒品质性状影响的研究得出：在相同栽培条件下，蛋白质含量、湿面筋含量、沉隆值、形成时间、评价值、耐揉指数等随海拔高度的升高面升高，出粉率、吸水率等随海拔高度的升高而降低，稳定时间、弱化度、和面时间、断裂时间等表现为中海拔高于低海拔、高海拔。总的来看，硬粒小麦品质性状表现为田麦栽培方式优于地麦栽培方式。     

Physical mapping of durum wheat lipoxygenase genes

A bright yellow color is an important quality criterion for pasta making. Yellow color depends on the amount of carotenoid pigments in grain, which is the result of the balance between pigment synthesis and degradation by lipoxygenases (LPX). The organization of genes coding for lipoxygenases in the tetraploid wheat genome is not completely understood. Here, we report the screening of a durum wheat BAC library with barley probes to characterize the physical distribution of Lpx genes. PCR characterization and BAC fingerprinting of the positive clones suggests that Lpx-B1.1 and Lpx-B3 are less than 103-kb apart, whereas Lpx-B1.2 is further apart from them. In the A genome a partially deleted copy of Lpx-1 (Lpx-A1_like) was found, colocalizing within a 42 kbp region with Lpx-A3, confirming that in both genomes these two genes are close to each other. The knowledge of the physical location of these two genes is important to understand the evolution of this family but also has practical implications since closely linked genes are difficult to separate by recombination. This may limit the number of Lpx allele combinations that can be obtained and affect the selection of optimal Lpx allele combinations for pasta quality improvement.     

Physicochemical control of durum wheat grain filling and glutenin polymer assembly under different temperature regimes

Durum wheat is grown in the Mediterranean area where drought and high temperature frequently prevail and impact grain texture, composition and yield. The purpose of this work was to examine the effect of high temperature on grain development and final composition according to the timing of exposure. High temperature (up to 27.5 °C) was applied either during the linear grain filling or drying phases or during whole grain development. The dynamics of grain dry mass, water, glutenin polymers, and protein bodies during grain development were determined. Irrespective of high temperature timing, the arrest of grain filling was observed at 45.9% grain moisture content. At that point, starch granules included in endosperm cells reached their physical packing limit, limiting further deposits. HT applied before physiological maturity shortened the duration of grain filling and resulted in a significant increase in grain protein concentration and in the proportion of vitreous grain. Late formation of sodium dodecyl sulfate (SDS)-insoluble glutenin polymers below 32% grain moisture content was also favored. The ability of wheat storage protein to form a viscoelastic matrix embedding starch granules at the beginning of grain desiccation is proposed to be mandatory for gaining vitreous grains and a high proportion of SDS-insoluble glutenin polymers.     

Determination of wheat bug (Eurygaster spp.) damage in durum wheat (Triticum durum L.) by electrophoresis and rapid visco analyser

The degradation effects of wheat bug protease(s) on glutenin proteins of durum wheat cultivars were investigated by electrophoresis and modified rapid visco analyser (RVA) test. Glutenin patterns of the bug damaged durum wheats changed substantially due to bug protease(s). Although high molecular weight glutenin subunits (HMW-GS) of three cultivars (Ege, Svevo, and Zenith) disappeared after 60 min of incubation, the HMW-GS of other two cultivars (Diyarbakir and Firat) were still visible even after the longest incubation period at medium damage level. It shows that there was an intercultivar variation in susceptibility to hydrolysis by bug proteolytic enzymes. Low molecular weight glutenin subunits of all cultivars decreased substantially after 30 min of incubation. The RVA curves indicated a clear reduction in viscosity in semolina samples with both medium and high damage levels as compared to their respective undamaged (control) samples. There were significant correlations (p < 0.001) between bug damage level and viscosities at 3 min (r = −0.765), at 4.5 min (r = −0.549) and at 10 min (r = −0.835), breakdown value (r = −0.534) and decay rate (r = 0.600). Consequently, hydrolysis rate of wheat bug protease(s) can be determined by modified RVA technique without much more chemicals, procedures and expensive equipments.     

Investigation of amber durum wheat for production of yellow alkaline noodles

Samples of Canadian amber durum wheat varieties, of various protein content and a composite of export cargo samples, were milled to yield straight-grade and patent flours by reducing semolina and processed into yellow alkaline noodles (YAN). Samples of Canada Hard White Spring (CWHWS) and Canada Western Red Spring (CWRS) were included for comparative purposes. YAN from durum wheat displayed a colour advantage over CWRS and CWHWS YAN. The durum YAN displayed an approximate 9–20 unit greater b* (yellowness) value than CWRS and CWHWS at 2 and 24 h after preparation. This relates to greater yellow pigment and flavonoid contents in the durum flours. All durum wheat YAN exhibited excellent noodle brightness, which was retained over time due to lower levels of the enzymes polyphenol oxidase (PPO) and peroxidase (POD). Durum noodles displayed significantly fewer specks than CWRS and were comparable to CWHWS. Durum wheat YAN cooking quality was equal to or slightly superior to CWRS and CWHWS. Durum wheat flour refinement imparted no significant effects on cooked noodle texture (maximum cutting stress, recovery, resistance to compression). However, the various texture parameters improved with durum wheat protein content and gluten strength.     

Pastamaking and breadmaking quality of soft-textured durum wheat lines

The effects of grain texture on pastamaking and breadmaking quality were studied in three F₈ soft-textured durum wheat lines (SDLs) containing wild-type alleles Pina-D1a and Pinb-D1a as compared with their hard durum sister lines (HDLs). SDLs homozygous for a small 5DS segment, less than 14.4 cM in size, accumulated puroindolines A (Pin-A) and B (Pin-B) and showed SKCS values (19.9-23.6) significantly lower than those (72.6-76.8) of their hard-textured counterparts lacking Pin-A and Pin-B. In addition, SDLs exhibited approximately 24% higher flour extraction rates compared with HDLs. Reducing the kernel hardness decreased farinograph water absorption, dough tenacity (P) and, accordingly, alveograph P/L ratio, but increased farinograph stability, mixing tolerance and dough extensibility (L). Spaghetti cooking quality, as determined by the sensory judgment of firmness, stickiness and bulkiness, was unaffected by the kernel hardness, whereas the loaf volume exhibited a 10% increase associated with kernel softening. Flour and semolina, but not spaghetti, from SDLs showed a substantial reduction in yellowness (b^*) and brownness (100 − L^*) likely due to their finer particle size compared with HDLs. Alleles Pina-D1a and Pinb-D1a may offer new perspectives for breeding dual purpose (pasta and bread) durum wheat varieties.     

Distribution along durum wheat kernel of the components involved in semolina colour

A bright yellow colour of pasta is an important qualitative trait for the durum wheat industry. Final colour is the result of the balance between yellow and brown components in semolina. Carotenoid pigments and lipoxygenase (LOX) enzyme are mainly involved in yellowness, whereas peroxidase (POD) and ash affect brown hue. All these components have a different distribution across the kernel, with varietal differences too. This study aimed to evaluate the distribution pattern of carotenoid pigments, α-tocopherol, linoleic acid, and ash content as well as of LOX and POD activities within the kernel of six durum wheat cultivars characterised by different pigment content and hydroperoxidation activity of LOX in semolina. The results confirmed differences in the distribution of these components across the kernel and among varieties. Additionally, this study identified for some components (POD, pigments and bleaching activity of LOX) a higher effect of genotype whereas for others (ash, α-tocopherol, hydroperoxidation activity) a marked effect of the debranning process. These results suggest that improvement of the final semolina colour could be reached both through breeding activity, enabling an early selection of better lines, and through an appropriate debranning process.     

Effect of foliar treatments to durum wheat on flag leaf senescence, grain yield, quality and deoxynivalenol contamination in North Italy

Since the production of durum wheat in the drier areas of the Mediterranean Basin is characterized by high variability in terms of yield and grain quality, there is also considerable interest in developing durum wheat in the northern regions, where the pedo-climatic conditions can offer the possibility of obtaining grain yields with higher technological quality and stability. However, the climatic conditions in the northern regions make durum wheat more prone to fungal foliar disease, particularly to Septoria Tritici Blotch (Septoria tritici Rob.) and to Fusarium Head Blight (Fusarium graminearum Petch and Fusarium culmorum Sacc.), with the consequent occurrence of DON in grains.Field experiments have been conducted over two growing seasons at four sites in North West Italy to evaluate the effect of fungicides and foliar nitrogen fertilizer application on durum wheat yield and grain quality. Five combinations of foliar application were compared at each site and each year (untreated control, azole fungicide application at heading, strobilurin fungicide at the stem elongation stage and/or at heading, the addition of a foliar N fertilizer to a fungicide programme). The following parameters were analysed: Septoria Tritici Blotch (STB) severity, flag leaf greenness using a chlorophyll meter, grain yield, test weight, grain protein content, ash content, vitreousness, Fusarium Head Blight (FHB) incidence and severity and deoxynivalenol (DON) contamination. The collected data underline that the cultivation of durum wheat at the climatic conditions of North Italy is actually risky and needs a direct control of fungal disease, which would be able to reduce the development of both foliar and head attacks. The double treatment, with a strobilurin application during the stem elongation stage and azole at heading, results to be an essential practice and showed advantages in terms of the delay of flag leaf senescence (+27%), STB control (+31), FHB control (+11%), yield (+32%) and DON contamination (−45%), compared to the untreated control. Other foliar treatments at heading, such as strobilurin or foliar N fertilizer applications, do not seem to provide any further advantage, for either grain yield or quality. No significant effect of fungicide or foliar N fertilizer application was recorded on the protein or ash concentration or vitreousness.     

Baking quality of emmer-derived durum wheat breeding lines

Durum wheat (Triticum turgidum L. var. durum) is used predominantly for pasta products, but there is increasing interest in using durum for bread-making. The goal of this study was to assess the bread-making potential of 97Emmer19, an Emmer wheat (Triticum turgidum L. var. dicoccum) and in breeding lines derived from crosses of 97Emmer19 with adapted durum wheat cultivars. 97Emmer19 and its progeny were evaluated in 2005 and 2006 along with five durum wheat cultivars. Three bread wheat (Triticum aestivum L.) cultivars were included as checks to provide a baseline of bread making quality observed in high quality bread wheat cultivars. 97Emmer19 exhibited higher LV than all the durum wheat checks and approached the LV achieved with the bread wheat cultivar ‘AC Superb’. Breeding lines derived from 97Emmer19 had higher LV than those of the durum wheat checks, confirming that this trait was heritable. In general, durum wheat cultivars with elevated gluten strength and/or increased dough extensibility were noted to have higher LV. Dough extensibility appeared to be a more critical factor as gluten strength increased. These results indicate that there is potential to select for genotypes with improved baking quality in durum breeding programs.     

Impact of wheat bran particle size on the technological and phytochemical properties of durum wheat pasta

In this study 7 bran fractions were produced by grinding coarse durum wheat bran followed by sieving to achieve median particle size ranges between 115 and 1497 μm. These bran fractions were incorporated into pasta at 1, 5, 10 and 20% and the phytochemical and technological properties evaluated. Higher incorporation of bran, especially at 20%, reduced pasta quality, but a reduced impact was seen at the same degree of incorporation using finer bran. Bran increased antioxidants (by up to 65%), ferulic acid (up to 400%) and phytosterols (up to 130%) in pasta, parameters which were insensitive to bran particle size above 10% incorporation except for ferulic acid, which was higher in particles between 248 and 1497 μm. It is recommended to use finer fractions if bran is added to pasta at 20% and higher, since they provide a better quality pasta while still delivering enhancements in phytochemical content above regular semolina pasta.     

Phytate and mineral elements concentration in a collection of Italian durum wheat cultivars

Mineral deficiencies are prevalent in human populations and the improvement of the mineral content in cereal products represents a possible strategy to increase the human mineral intake. Nevertheless, most of the inorganic phosphorus (P_i) present in mature cereal seeds (40–80%) is stored as phytate, an anti-nutritional factor that forms complexes with minerals such as Ca, Mg, Zn and Fe reducing their bioavailability. The present study was undertaken: (i) to determine the variation in phytate and mineral concentrations in the whole grains of 84 Italian durum wheat (Triticum durum Desf.) cultivars representative of old and modern germplasm; (ii) to estimate the magnitude of genotype × environment interaction effects; and (iii) to examine the interrelationships among mineral concentrations in durum wheat with the final aim to identify superior durum wheat cultivars that possess low phytate content and high concentration of mineral elements in their whole-wheat flour. The cultivars were grown in field trials during 2004–2005 at Foggia, Italy and during 2005–2006 at Foggia and Fiorenzuola d’Arda—Southern and Northern Italy. The phytate content was estimated indirectly by using a microtitre plate assay evaluating the P_i absorbance at 820 nm, while the Cu, Fe, Mn, Ca, K, Mg, Na and Zn mineral contents were determined by ICP/OES. The contents of Zn and Fe across years and locations ranged from 28.5 to 46.3 mg/kg for Zn with an average of 37.4 mg/kg and from 33.6 to 65.6 mg/kg for Fe with an average of 49.6 mg/kg. P_i grain content was between 0.46 and 0.76 mg/g showing a positive correlation with all minerals except Cu and Zn. Although breeding activity for Fe and Zn would be difficult because G × E interaction is prevalent, multi-location evaluation of germplasm collection help to identify superior genotypes to achieve this objective. The results here reported open the possibility of designing a specific breeding program for improving the nutritional value of durum wheat through the identification of parental lines with low-P_i and high minerals concentration in whole grains.     

Quantitative trait loci for yellow pigment concentration and individual carotenoid compounds in durum wheat

A defining factor for the commercial value of durum wheat pasta is its amber colour, which depends on the semolina yellow pigment concentration and on the oxidative enzymatic activity. Among carotenoids controlling yellow colour, the presence of β-carotene is also important as precursors of vitamin A. The aim of the present study was to detect quantitative trait loci (QTL) for yellow pigment concentration, yellow index and individual carotenoid compounds (lutein, zeaxanthin, β-cryptoxanthin, α-carotene and β-carotene) in a durum segregant population. Total carotenoid concentration amounted to 37% of the yellow pigments, indicating unknown colour-producing compounds in the durum extracts. Lutein was the most abundant carotenoid, followed by zeaxanthin, α-carotene and β-carotene, while β-cryptoxanthin was a minor component. Phytoene synthase marker Psy-A1, 150 SSR and EST-SSR markers, and 345 DArT^® markers, were used to construct the linkage map for subsequent QTL analysis. Clusters of QTL for total and/or one or more carotenoid compounds were detected on the same chromosome regions (2A, 3B, 5A and 7A) where QTL for yellow pigment concentration and yellow index were identified. The molecular markers associated to major QTL would be useful for marker-assisted selection programs to facilitate high carotenoid concentration with high nutritional carotenoid compounds in wheat grain.     

Metabolic profiling and analysis of volatile composition of durum wheat semolina and pasta

Although pasta is generally not considered for its aromatic properties, some evidence proves that cereal flours release volatile compounds and they might have an effect on the aroma of the transformed products. This work reports on the characterization of the volatile components of semolina and pasta obtained from four durum wheat cultivars (Triticum durum Desf., cvs. PR22D89, Creso, Cappelli, Trinakria). Semolina samples were characterized through polar metabolite profiling and fatty acid analysis to identify potential precursors of the volatile components. The results show significant differences among the samples tested with cv. Trinakria characterized by the highest content of sugars and fatty acids. Volatile composition was investigated both in semolina and in cooked pasta using headspace solid-phase micro-extraction (HS-SPME) and identified by GC–MS. Thirty-five volatile compounds including aldehydes, ketones, alcohols, terpenes, esters, hydrocarbons and a furan were identified. Significant differences were observed between semolina and pasta samples in terms of composition and amount of the volatile compounds. During cooking an increase in aldehyde content, the appearance of ketones and a decrease in alcohol content were observed. Correlations between metabolites and volatiles demonstrate that the flavour of cooked pasta may differ significantly depending on the durum wheat cultivar employed.     

Study of the microstructure of durum wheat endosperm using X-ray micro-computed tomography

Durum wheat grains are used for producing food, such as pasta or couscous. The grain mechanical properties which are linked to its internal micro-structure (i.e. endosperm porosity) are known to determine its ability to produce semolina during milling. The proportion of grains having porous endosperm in a batch appears therefore as a critical quality factor for the durum wheat value chain. Our objective was to investigate the ability of X-ray micro-tomography (μCT) method to describe the porous or vitreous counterpart structures in the endosperm of durum wheat grains. We selected two different durum wheat samples displaying vitreous or partially porous endosperms. The grains were analyzed using μCT at two pixel sizes (1 μm or 7 μm). The μCT data collected at 7 μm pixel size were used for qualitative classification of grains according to apparent distribution curve of the porosity parameters. Analysis of μCT images at 1 μm pixel size allowed us to propose pore size classification in the vitreous and porous parts of the endosperm in three durum wheat grain. Results are used to better describe the durum-wheat endosperm microstructure, but requires long scanning periods.     

Using CERES-Wheat to simulate durum wheat production and phenology in Southern Sardinia,Italy

Durum wheat is a crop of great economic relevance for Mediterranean regions, especially in developing countries. A decreasing trend in durum production is expected in the near future because of several factors, in particular environmental constraints due to climate change and variability. The aim of this work was to test the predictive performance of CERES-Wheat model, implemented in DSSAT software systems, under Mediterranean climate condition and soil types of Southern Sardinia, Italy. CERES-Wheat model was calibrated for three durum wheat Italian varieties (Creso, Duilio, and Simeto) using a 30-year data set (1974–2004) and a trial and error iterative procedure. Then, the model was validated and evaluated using several statistics. The model showed a quite good performance in predicting grain yield and anthesis date, with errors comparable with those reported by other studies conducted on bread and durum wheat. Predictions of grain weight and grain number did not match very well observations, confirming the difficulties of CERES-Wheat in estimating grain yield components. The results of this study suggest the need of specific field experiments and further model evaluations and improvements to better understand model simulation results of grain yield components of durum wheat.     

Genetic improvement effects on yield stability in durum wheat genotypes grown in Italy

In durum wheat (Triticum durum Desf.) the improvement of yield stability represents an important component for agricultural progress worldwide. This work reports on the evaluation of the yield performance of 65 durum wheat genotypes (landraces, old and new cultivars with different years of release and advanced breeding lines), in a range of Italian environments to assess the changes in adaptation and yield stability achieved over the last century as results of the genetic improvement. The Additive Main effect and Multiplicative Interaction (AMMI) analysis was used to capture a large portion of the Genotype × Environment interaction (GE) sum of squares and to separate main and interaction effects. The breeding strategies adopted during the last decades have contributed to reduce the interaction of genotypes with environments selecting genotypes with better stability across a wide range of locations and years and modern genotypes outperformed the old ones in all test environments with a strong adaptability to improved fertility. The old cultivars were characterized by a minimal responsiveness to improved environmental conditions, showing an almost stable nominal yield in agreement with the concept of “biological” or “static” stability. In contrast, the modern cultivars were highly responsive to fertility improvements and showed a pronounced adaptation to high-input environments. Notably, within the group of modern cultivars two of them, Tiziana and Giusto, showed a high-yield stability in biological terms and a high nominal yield across the tested environments. Giusto and Tiziana were the best cultivars in terms of both nominal yield and minimal GE interaction, indicating that selecting for improved yield potential may increase yield in a wide range of environments.     

Characterisation of a specific class of typical low molecular weight glutenin subunits of durum wheat by a proteomic approach

Glutenin polymers are formed by high (HMW-GS) and low molecular weight glutenin subunits (LMW-GS). The latter group of subunits has been less characterised compared to the former due to their great number and heterogeneity.