Protein-peptide interactions in mixtures of whey peptides and whey proteins

The effects of several conditions on the amounts and compositions of aggregates formed in mixtures of whey protein hydrolysate, made with Bacillus licheniformis protease, and whey protein isolate were investigated using response surface methodology. Next, the peptides present in the aggregates were separated from the intact protein and identified with liquid chromatography-mass spectrometry. Increasing both temperature and ionic strength increased the amounts of both intact protein and peptides in the aggregates. There was an optimal amount of added intact WPI that could aggregate with peptides, yielding a maximal amount of aggregated material in which the peptide/protein molar ratio was around 6. Under all conditions applied, the same peptides were observed in the protein-peptide aggregates formed. The dominant peptides were beta-lg AB [f1-45], beta-lg AB [f90-108], and alpha-la [f50-113]. It was hypothesized that peptides could form a kind of glue network that can include beta-lactoglobulin via hydrophobic interactions at the hydrophobic binding sites at the surface of the protein.     

Formation of whey protein isolate (WPI)-dextran conjugates in aqueous solutions

The conjugation reaction between whey protein isolate (WPI) and dextran in aqueous solutions via the initial stage of the Maillard reaction was studied. The covalent attachment of dextran to WPI was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) with both protein and carbohydrate staining. The formation of WPI-dextran conjugates was monitored by a maximum absorbance peak at approximately 304 nm using difference UV spectroscopy. The impact of various processing conditions on the formation of WPI-dextran conjugates was investigated. The conjugation reaction was promoted by raising the temperature from 40 to 60 degrees C, the WPI concentration from 2.5 to 10%, and the dextran concentration from 10 to 30% and lowering the pH from 8.5 to 6.5. The optimal conjugation conditions chosen from the experiments were 10% WPI-30% dextran and pH 6.5 at 60 degrees C for 24 h. WPI-dextran conjugates were stable under the conditions studied.     

Kinetics of sucrose crystallization in whey protein films

The kinetics of sucrose crystallization in whey protein isolate (WPI) films was studied at 25 degrees C in four different relative humidity environments: 23, 33, 44, and 53%. The effects of protein matrix, crystallization inhibitors, and storage environment on the rate constants of sucrose crystallization were determined using the Avrami model of crystallization. It was found that a cross-linked, denatured whey protein (WP) matrix more effectively hindered sucrose crystallization than a protein matrix of native WP. The crystallization inhibitors tested were lactose, raffinose, modified starch (Purity 69), and polyvinylpyrrolidone (Plasdone C15). Raffinose and modified starch were determined to be the more effective inhibitors of sucrose crystallization. At lower relative humidities (23, 33, and 44%), the cross-linked protein matrix played a more important role in sucrose crystallization than the inhibitors. As relative humidity increased (53%), the crystallization inhibitors were more central to controlling sucrose crystallization in WPI films.     

Effects of sugars on whey protein isolate gelation

Whey protein isolate (WPI) gels were prepared from solutions containing ribose or lactose at pH values ranging from 6 to 9. The gels with added lactose had no color development, whereas the gels with added ribose were orange/brown. Lactose stabilized the WPI to denaturation, which increased the time and temperature required for gelation, thus decreasing the fracture modulus of the gel compared to the gels with added ribose and the gels with no sugar added. Ribose, however, favored the Maillard reaction and covalent cross-linking of proteins, which increased gel fracture modulus. The decreased pH caused by the Maillard reaction in the gels containing ribose occurred after protein denaturation and gelation, thus having little if any effect on the gelation process.     

Gelation of whey protein concentrate-cassava starch in acidic conditions.

Whey protein concentrate (WPC)-cassava starch (CS) gels were prepared by heating WPC-CS dispersions (0-12.5% protein-0-4.2% starch, w/w; pH 3.75 and 4.2). Gels were characterized by measures of water-holding capacity (WHC), estimation of the relative size and/or density distribution of the gel particles, and light microscopy. Differential scanning calorimetry (DSC) of WPC-CS dispersions was also performed. Results show that CS increased the WHC of gels. Mixed gels presented separate zones of gelatinized starch and aggregated protein and a higher proportion of large/high-density particles. DSC assays showed that starch gelatinization preceded protein denaturation during heating. Starch gelatinization shifted to higher temperatures in dispersions containing WPC, due to the presence of whey proteins, lactose, and calcium.     

Anthocyanin antioxidant activity and partition behavior in whey protein emulsion

The antioxidant activities of anthocyanins and anthocyanin fractions isolated from blackcurrants, raspberries, and lingonberries were investigated in whey protein-stabilized emulsion. The extent of protein oxidation was measured by determining the loss of tryptophan fluorescence and formation of protein carbonyl compounds and that of lipid oxidation by conjugated diene hydroperoxides and hexanal analyses. The antioxidant activity of berry anthocyanins increased with an increase in concentration. Blackcurrant anthocyanins were the most potent antioxidants toward both protein and lipid oxidation at all concentrations due to the beneficial combination of delphinidin and cyanidin glycosides. Most berry anthocyanins (69.4-72.8%) partitioned into the aqueous phase of the emulsion, thus being located favorably for antioxidant action toward protein oxidation. The presence of the lipid decreased the share of anthocyanin in the aqueous phase. Thus, the structure of food affects the antioxidant activity by influencing the partitioning of the antioxidant.     

羊奶乳清蛋白水解物的酶解制备

采用Alcalase与Flavourzyme两种酶对羊奶乳清蛋白进行水解,以水解度为指标,对两种酶单独使用及复合使用水解羊奶乳清蛋白的工艺条件进行了研究。试验结果显示:采用Alcalase与Flavourzyme复合水解羊奶乳清蛋白的效果较好,特别是采用先添加Flavourzyme后加入Alcalase进行水解,不仅能提高羊奶乳清蛋白的水解度,使其达到32.81%,而且对改善水解液的口感有较大的作用。     

Iron availability from whey protein hydrogels: an in vitro study

The influence of whey protein hydrogel microstructure, filamentous versus particulate, on iron delivery was studied under different conditions, including simulated gastrointestinal conditions. Experiments were initially conducted to determine the impact of pH and enzymes on iron release. The results show that different iron release profiles can be obtained from filamentous and particulate gels. Particulate gels released more iron than filamentous gels at acidic pH, but the opposite was observed at alkaline pH. In the presence of pepsin at pH 1.2 or pancreatin at pH 7.5, both gel types showed increased protein hydrolysis, but only filamentous gels showed increased iron release, suggesting that matrix structure plays an important role in iron delivery. A dissolution test was carried out under gastrointestinal conditions to mimic the in vivo dissolution process. Filamentous gel released most of its iron during the intestinal phase of a simulated digestion, hence protecting iron during its transit in the gastric zone. Absorption of iron by the Caco-2 system, used to estimate intestinal absorption, revealed that filamentous gels favored intracellular iron absorption. These results suggest that filamentous gels show promise as matrices for transporting iron and promoting its absorption and therefore should be of major interest in the development of innovative functional foods.     

Enzymatic hydrolysis of heat-induced aggregates of whey protein isolate

The effects of heat-induced denaturation and subsequent aggregation of whey protein isolate (WPI) solutions on the rate of enzymatic hydrolysis was investigated. Both heated (60 °C, 15 min; 65 °C, 5 and 15 min; 70 °C, 5 and 15 min, 75 °C, 5 and 15 min; 80 °C, 10 min) and unheated WPI solutions (100 g L(-1) protein) were incubated with a commercial proteolytic enzyme preparation, Corolase PP, until they reached a target degree of hydrolysis (DH) of 5%. WPI solutions on heating were characterized by large aggregate formation, higher viscosity, and surface hydrophobicity and hydrolyzed more rapidly (P < 0.001) than the unheated. The whey proteins exhibited differences in their susceptibility to hydrolysis. Both viscosity and surface hydrophobicity along with insolubility declined as hydrolysis progressed. However, microstructural changes observed by light and confocal laser scanning microscopy (CLSM) provided insights to suggest that aggregate size and porosity may be complementary to denaturation in promoting faster enzymatic hydrolysis. This could be clearly observed in the course of aggregate disintegration, gel network breakdown, and improved solution clarification.     

Storage stability of ascorbic acid incorporated in edible whey protein films

The stability of ascorbic acid (AA) incorporated in whey protein isolate (WPI) film and the related color changes during storage were studied. No significant loss of AA content was found in any films prepared from pH 2.0 casting solution stored at 30% relative humidity (RH) and 22 °C over 84 days. Total visible color difference (ΔE*(ab)) of all films slowly increased over storage time. The ΔE*(ab) values of pH 3.5 films were significantly higher than those of pH 2.0 films. The stability of AA-WPI films was found to be mainly affected by the pH of the film-forming solution and storage temperature. Oxidative degradation of AA-WPI films followed Arrhenius behavior. Reduction of the casting solution pH to below the pK(a1) (4.04 at 25 °C) of AA effectively maintained AA-WPI storage stability by greatly reducing oxidative degradation, whereas anaerobic and nonenzymatic browning were insignificant. The half-life of pH 2.0 AA-WPI film at 30% RH and 22 °C was 520 days.     

Effect of whey protein on the in vivo release of aldehydes

Retention of aldehydes by whey proteins in solutions buffered at a range of pH values was studied under static and dynamic headspace conditions and in vivo in exhaled air. Static headspace measurements showed a clear increase in retention in the presence of whey proteins for aldehydes with longer carbon chains and for buffer solutions with higher pH values. For in vivo aldehyde release measurements, these effects were much less pronounced. The presence of saliva or the binding of aldehydes to the surface of the oral cavity was not responsible for this effect. This difference can be explained by the highly dynamic conditions of in vivo aroma release of liquid products, due to the relatively large flow of air during exhalation. After swallowing, a thin film of aldehyde solution remains in the pharynx; subsequent exhalation will release both the free aldehydes present in this film and those reversibly bound to the whey protein.     

Behavior of protein in the presence of calcium during heating of whey protein concentrate solutions

The effect of added CaCl(2) on heat-induced changes in whey protein (WP) solutions prepared from whey protein isolate (WP1), acid whey protein concentrate (WP2), and cheese whey protein concentrate (WP3) was investigated. The loss of native-like, proteins, aggregation, and gel firmness of WP were maximum at certain levels of added CaCl(2). These levels were different for different WP products. The effect of added CaCl(2) on these changes appeared to be related to the initial calcium concentrations of these solutions. The higher the calcium content of the product, the less available sites for added CaCl(2) to bind. It was considered that addition of CaCl(2) changed the types of protein interactions that formed the protein aggregates during heating. Added calcium caused dramatic decreases in fracture stress of WP gels due to the formation of large protein aggregates.     

Interactions of whey proteins during heat treatment of oil-in-water emulsions formed with whey protein isolate and hydroxylated lecithin

The interactions of proteins during the heat treatment of whey-protein-isolate (WPI)-based oil-in-water emulsions with and without added hydroxylated lecithin were studied by examining the changes in droplet size distribution and the quantity and type of adsorbed and unadsorbed proteins. Heat treatment at 90 degrees C of WPI emulsions resulted in an increase in total adsorbed protein; unadsorbed beta-lactoglobulin (beta-lg) was the main protein interacting with the adsorbed proteins during the first 10 min of heating, but after this time, unadsorbed alpha-lactalbumin (alpha-la) also associated with the adsorbed protein. In emulsions containing hydroxylated lecithin, the increase in total adsorbed protein during heat treatment was much lower and the unadsorbed beta-lg did not appear to interact with the adsorbed proteins during heating. However, the behavior of alpha-la during heat treatment of these emulsions was similar to that observed in the emulsions containing no hydroxylated lecithin. In the presence of NaCl, the particle size of the emulsion droplets and the quantities of adsorbed protein increased markedly during heating. Emulsions containing hydroxylated lecithin were less sensitive to the addition of NaCl. These results suggest that the binding of hydroxylated lecithin to unfolded monomers or intermediate products of beta-lg reduces the extent of heat-induced aggregation of beta-lg and consequently decreases the interactions between unadsorbed beta-lg and adsorbed protein. This was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of heated whey protein and hydroxylated lecithin solutions.     

NMR relaxation and water self-diffusion studies in whey protein solutions and gels

The changes in water proton transverse relaxation behavior induced by aggregation of whey proteins are explained in terms of the simple molecular processes of diffusion and chemical exchange. The water self-diffusion coefficient was measured in whey protein solutions and gels by the pulsed field gradient NMR method. As expected, water self-diffusion was reduced with increased protein concentrations. Whatever the concentration, the water molecules were free to diffuse over distances varying from 15 to 47 mum. Water diffusion was constant over these distances, demonstrating that no restrictions were found to explain the water hindrance. The modification in protein structure by gelation induced a decrease in water diffusion. The effects of protein concentration on water diffusion are discussed and modeled. Two approaches were compared, the obstruction effect induced by a spherical particle and the cell model, which considered two water compartments with specific self-diffusion coefficients.     

Moisture-induced aggregation of whey proteins in a protein/buffer model system

Moisture-induced protein aggregation in a dry or intermediate-moisture food matrix can contribute to the loss of product acceptability. The present study evaluated the molecular mechanisms and controlling factors for moisture-induced whey protein aggregation in a premixed protein/buffer model system. Insoluble aggregates rapidly formed during the first 3 days of storage at 35 degrees C with a slower rate afterward. Evaluation of the insoluble aggregates by solubility tests in solutions containing SDS/urea/guanidine HCl/dithiothreitol and gel electrophoresis showed that the formation of intermolecular disulfide bonds was the main mechanism for protein aggregation, and all major whey proteins were involved in the formation of insoluble aggregates. Effects of various factors on aggregation were also investigated, including moisture content, medium pH, and the addition of NaCl. The dependence of aggregation on moisture content was bell-shaped, and the maximal extent of aggregation was achieved at a moisture content of around 70-80% on a dry weight basis.     

Formation of disulfide bonds in acid-induced gels of preheated whey protein isolate

Cold gelation of whey proteins is a two-step process. First, protein aggregates are prepared by a heat treatment of a solution of native proteins in the absence of salt. Second, after cooling of the solution, gelation is induced by lowering the pH at ambient temperature. To demonstrate the additional formation of disulfide bonds during this second step, gelation of whey protein aggregates with and without a thiol-blocking treatment was studied. Modification of reactive thiols on the surface of the aggregates was carried out after the heat-treatment step. To exclude specific effects of the agent itself, different thiol-blocking agents were used. Dynamic light scattering and SDS-agarose gel electrophoresis were used to show that the size of the aggregates was not changed by this modification. The kinetics of gelation as determined by the development of pH and turbidity within the first 8 h of acidification were not affected by blocking thiol groups. During gelation, formation of large, covalently linked, aggregates occurred only in the case of unblocked WPI aggregates, which demonstrates that additional disulfide bonds were formed. Results of permeability and confocal scanning laser microscope measurements did not reveal any differences in the microstructure of networks prepared from treated or untreated whey protein aggregates. However, gel hardness was decreased 10-fold in gels prepared from blocked aggregates. Mixing different amounts of blocked and unblocked aggregates allowed gel hardness to be controlled. It is proposed that the initial microstructure of the gels is primarily determined by the acid-induced noncovalent interactions. The additional covalent disulfide bonds formed during gelation are involved in stabilizing the network and increase gel strength.     

Pressure-induced unfolding and aggregation of the proteins in whey protein concentrate solutions

Whey protein concentrate solutions (12% w/v, pH 6.65 +/- 0.05) were pressure treated at 800 MPa for 20-120 min and then examined using size exclusion chromatography (SEC), small deformation rheology, transmission electron microscopy, and various types of one-dimensional (1D) and two-dimensional (2D) polyacrylamide gel electrophoresis (PAGE). The pressure-treated samples showed a time-dependent loss of native whey proteins by SEC and 1D PAGE and a corresponding increase in non-native proteins and protein aggregates of different sizes. These aggregates altered the viscosity and opacity of the samples and were shown to be cross-linked by intermolecular disulfide bonds and by noncovalent interactions using 1D PAGE [alkaline (or native), sodium dodecyl sulfate (SDS), and SDS of reduced samples (SDS(R))] and 2D PAGE (native:SDS and SDS:SDS(R)). The sensitivity of the major whey proteins to pressure was in the order beta-lactoglobulin B (beta-LG B) > beta-LG A > bovine serum albumin (BSA) > alpha-lactalbumin (alpha-LA), and the large internal hydrophobic cavity of beta-LG may have been partially responsible for its sensitivity to high-pressure treatments. It seemed likely that, at 800 MPa, the formation of a beta-LG disulfide-bonded network preceded the formation of disulfide bonds between alpha-LA or BSA and beta-LG to form multiprotein aggregates, possibly because the disulfide bonds of alpha-LA and BSA are less exposed than those of beta-LG either during or after pressure treatment. It may be possible that intermolecular disulfide bond formation occurred at high pressure and that hydrophobic association became important after the high-pressure treatment.     

Rheological and physical properties of derivitized whey protein isolate powders

Pregelatinized starch is employed in many food applications due to the instantaneous nature of thickening and stability imparted by modification. Proteins, however, have been excluded as a viscosifying agent due to requisite thermal treatments required to create structure. Whey protein isolate gels were produced while manipulating heating time, pH, and mineral type/content, producing a variety of gel types/networks. Gels were frozen, freeze-dried, and ground into a powder. Once reconstituted in deionized water, gel powders were evaluated based on solubility studies, rotational viscometry, and electrophoresis. The protein powder exhibiting the largest apparent viscosity, highest degree of hydrolysis, and greatest solubility was selected for pH and temperature stability analyses and small amplitude oscillatory rheology. This processing technique manipulates WPI into a product capable of forming cold-set weak gel structures suitable for thickening over a wide range of temperature and pH food systems.     

Rheological properties and characterization of polymerized whey protein isolates.

Whey protein polymers were formed by heating whey protein isolate solutions at 80 degrees C. Flow behaviors of whey protein polymers produced from different protein concentrations and heating times were comparable to various flow behaviors of hydrocolloids. Polymer formation was found to be a two-phase process. The initial protein concentration was a significant factor that determines the size and/or shape of the primary polymer in the first phase as shown by intrinsic viscosity. Heating time was a factor in determining the aggregation in the second phase as shown by apparent viscosity. Intrinsic viscosity of whey protein polymers was as high as 141.7 +/- 7.30 mL/g, compared to 5.04 +/- 0.20 mL/g for native whey proteins. The intrinsic viscosity and gel electrophoresis data suggested that disulfide bonds played an important role in whey polymer formation.     

Ascorbic acid-containing whey protein film coatings for control of oxidation

A formulation for the whey protein isolate film or coating incorporating ascorbic acid (AA-WPI film or coating) was developed. Tensile and oxygen-barrier properties of the AA-WPI film were measured. Antioxidant effects of the AA-WPI coating on roasted peanuts were studied by comparing the values of peroxide (PO), thiobarbituric acid reactive substance (TBARS), and free-radical-scavenging activity, determined with noncoated peanuts and peanuts coated with WPI with and without ascorbic acid during storage at 21% relative humidity (RH) and 23, 35, and 50 degrees C. The incorporation of AA reduced elongation of WPI films. The oxygen-barrier property of the WPI film was significantly improved by incorporation of AA. The AA-WPI coating retarded lipid oxidation in peanuts significantly at 23, 35, and 50 degrees C. The AA-WPI coated peanuts were more red than noncoated peanuts at all storage temperatures.